Pages

Search

Microsoft Word - Word 2013 won't start even in safe mode. No error messages.

Microsoft Word - Word 2013 won't start even in safe mode. No error messages.

Word 2013 won't start even in safe mode. No error messages.

Posted: 18 Nov 2014 02:53 PM PST

I set up a new laptop running Windows 8.1 two days ago, and installed Office yesterday.  Word worked fine yesterday but when I try to start it today, nothing happens.  I've tried rebooting and starting Word in safe mode, and also compatibility troubleshooting, but no luck yet.  There are no error messages and I can't find any logged events or errors.

I would rather avoid uninstalling / re-installing.  Can anyone help?

Merging Documents with Endnotes

Posted: 18 Nov 2014 02:22 PM PST

Hi, all, 

I have been trying to combine several word documents using Word 2010 and am having no success.

I have seven .docx files, several of which have end notes, that I want to combine into a single document.

I wish for the end notes to appear at the end of each document with the numbers starting at 1 with each document. 

After inserting all seven documents using the 'Text from File' option, I then entered Page breaks at the end of each of the documents. After, I right-clicked on one of the Endnotes to ensure that the option for Endnotes was set to "End of section" and applied all of the document. Unfortunately, however, all of the Endnotes still appear at the end of the document. 

Could someone please explain what precisely to do and why I am having these issues? I have spen over four hours online searching for a solution and  trying new ideas. 

Thanks! 

word art

Posted: 18 Nov 2014 02:19 PM PST

anyone know how to use the new word art? I am trying to curve some words but I cant figure out where the tool is.

Word 2010 - Hyperlinks to a location in the same document stop working

Posted: 18 Nov 2014 01:25 PM PST

I'm a Business Analyst who documents requirements for changes to our systems. In my requirements documents I often create hyperlinks to other locations within my document. For example, in the requirements area of my document I might add a hyperlink to Business Rules or a mock up within the same document that apply to the topic I have writing about. 

I have found that the hyperlinks to locations in the same document stop working and I can't figure out how to fix them. I've Edited the hyperlink, removed and readded them. But noting works. When I click on a hyperlink I get an message "Opening <path\filename> Some files can contain viruses or otherwise......"

Most of the time I am adding a hyperlink to another section within the document, but I also will add a bookmark and then create a hyperlink to the bookmark.

I add hyperlinks by: 1)  right-clicking my mouse at the desired location which launches a list of options 2) Select hyperlink 3) Choose Place in This Document 4) select the section or bookmark and click OK.

The hyperlink will usually work after I first create it but later when I open the file they no longer work. I either get the above mentioned message or the system will display the title page instead of going to the section of the document that I want it to.

creating an IF THEN ELSE merge field that contains supporting text?

Posted: 18 Nov 2014 11:17 AM PST

I have strung together three merge fields with some supporting text:

«DEGREE_CODE1» «DEGREE_YEAR1» UB «SCHOOL1» («MAJOR1»)

When I execute the merge, it looks something like this:

BA 1976 UB School of Social Sciences (Philosophy)

However, if the fields are blank, it returns this:

  UB  ()

If the fields are blank, I'd like it to suppress the line entirely. How do I build the IF THEN ELSE statement? Or should I be doing something else? 

Thanks!

Bing Images in Word?

Posted: 18 Nov 2014 09:59 AM PST

I know you can search Bing directly from Word by clicking review>research, but how do I get the images results? It would be so much easier to type something in, copy the image, and paste it without leaving Word. Any ideas? Help is appreciated.

Font size variation in Windows Tech Preview compared to Windows 7

Posted: 18 Nov 2014 09:22 AM PST

I routinely use the Tahoma font in Word 2007 selecting Bold and font size 10.

I have been using this continuously in Windows 7 (ongoing project).

However, when doing exactly the same thing in Windows Technical Preview, the type is noticeably smaller even though it is the same Tahoma Bold font size 10.

Can anyone suggest a reason for this and a possibly solution.

Increasing the font size to 11 or 12 when using Word while running Technical Preview does not really work.

Please do not suggest updating to Word 2010 or 2013 as I am completely happy with my Word 2007.  I simply want an answer to my question eather than well intentioned "advice" to update

Microsoft Office 2010 does not show track changes sent via Email

Posted: 18 Nov 2014 07:25 AM PST

Hi All,

I have someone sent me an attachment of .docx file with track changes. I opened the attachment but no track change displayed. I am using Office 2010. When trying to accept the track changes anyway it says There is no Track change on that document. But the sender sent me a screenshot of the document with the track changes displayed from their end. If I forward same document to someone else, they cannot see the track change either. It looks like the only person who can see the track change is the sender. I can make track change on the same document and send it to another person, they can see the changes I made.

Please advise.

Thank you!

word and excel printing error under office 2013, need help

Posted: 18 Nov 2014 07:09 AM PST

I have a New HP 4630 AIO  connected to my new surface pro 3.  Have a table with 5 columns 2 pages when I print it looks fine in preview. But print output misses half the first page just a blank, also RH edge of table grid missing (appears as if its too  big for the page. When the printer stops a banner flashes in top RH corner of the screen saying error 4630 could not print a m/s word document.

It also does this when you try to print as an excel sheet. Error r4630 could not print M/S Excel document

paper set to A4 ,

Is this a know problem? What do I do

david

Tracked Changes missing

Posted: 18 Nov 2014 06:55 AM PST

Split from this thread.

I have someone sending me a Word document .docx who can see the track changes from their side. When I receive it and open it, there is no track change. None. When I click "Accept" gives me "The document contains no comments or tracked changes". If I made track changes on it and send it to another user, they can see only the changes I made, not the original that supposed to be there.

The only person who can see the track changes is the original sender. I could not see it and if I forward to another person, the could not see it either.

Please help.

Word Macro to save the file in the format "FILENAME field - Content in table 1, R1C2"

Posted: 18 Nov 2014 04:42 AM PST

Hi,

I have a FILENAME file somewhere in the body of my document and a table with 4 rows and 2 columns.

I'd like to create a macro to save my file in the format "FILENAME field - Content in table 1, R1C2". How do I do that? Please help. Thanks.

Search for a first word not preceding a second word - word 2010

Posted: 18 Nov 2014 03:01 AM PST

Hi,

Is it possible to search for a first word not preceding a second word? For example, I want to find all occurrences of the word 'island' without the word 'tropical' preceding it, because I want to replace all occurrences of 'island' with 'tropical island'.

Thank you,

Jerome

MS Word 2010 Freezes Every Few Minutes

Posted: 18 Nov 2014 02:53 AM PST

I have seen a lot of threads about this but no proper answers.

Just installed Office 2010, and having problems. MS Word 2010 freezes every 3-4minutes

  • It is not Autosave - firstly Autosave was set to 10minutes and the crash was far more regular (3-4mins). Also Autosave is now off and still the problem remains.
  • A reinstall of Office does not help. It is very unlikely that the core program is at fault, since it works fine on other machines in the business.
  • The document is not content rich. It is single page with one small picture (.png 300px x 175px) and text. The only formatting is a bold, centered, size 16px title.
  • There are no macros running
  • I reinstalled Office, started Word, and still the crash happens within a few minutes.
  • Started Word in Safe Mode
  • Installed latest Windows & Office updates
  • Disconnected from the network and turned off AV
  • Repairing Office

This is the EventVwr entry

The program WINWORD.EXE version 14.0.7134.5000 stopped interacting with Windows and was closed. To see if more information about the problem is available, check the problem history in the Action Center control panel.
 Process ID: 1144
 Start Time: 01d00317da21c9a9
 Termination Time: 10
 Application Path: C:\Program Files (x86)\Microsoft Office\Office14\WINWORD.EXE
 Report Id: ed49d97b-6f0b-11e4-9983-c89cdce3a539

I have seen some other posts about this, but the steps listed there (turning off AutoSave, problem Macros, for example) do not work or apply for me. 

Any help much appreciated. 

Gridline not shown in the background

Posted: 18 Nov 2014 12:08 AM PST

I know how to enable or disable the gridline by checking gridline under the tab VIEW or the tab Pageout > align

but with particular documents

I still cannot see the gridline

Please help

How to recover password protected .docx file from word 2013

Posted: 17 Nov 2014 09:46 PM PST

 My colleague has protected an important document in word 2010 with encrypted password facility. Now he is not with organization.  Neither my IT department nor any one of us can open the file. 

How can we get that file back

Recovering Deleted Clipboard Items in MS Word 2010

Posted: 17 Nov 2014 08:27 PM PST

I lost about 13 pages of text today on the MS Word 2010 clipboard. After being prompted with the save function, when originally exiting the application, I did not save the items attached to the clipboard. I did not have the "save backup file" radio button selected in the advanced options of the application. Due to this mistake, I believe MS Word did not save the current text file to the third party file application Dropbox. There was a deleted version of the file within the recycling bin, but after recovering the file I still do not have the most recent 14 page file I was working on. Is there anyway I can recover these items from the clipboard?

Thanks

How to capitalize easily in Word 2013

Posted: 17 Nov 2014 06:32 PM PST

I've been an MS Word user since 1995, and until I purchased the 2013 version, I made extensive use of the <shift> f3 shortcut to correct capitalization when proofreading documents. This shortcut doesn't work in 2013. Why? I hate this version. Difficult to navigate and all of my favorite features are gone. I can't even get a calendar without finding a template online. Hate, hate, hate it and would rather downgrade back to 2010, but I have Windows 8.1, and the computer came with Office 2013. YUCK!!! Does anyone have a shortcut keys quick reference I can use to retrain myself to this necessary evil?

Shading in a table

Posted: 17 Nov 2014 05:13 PM PST

If I have shaded the cells in a table Gray 65%, and I want to change them to Gray 80%, is there an easy way to do it?

Copying and pasting - "paste" option box displays below the pasted item and hides the text that follows on the next line

Posted: 17 Nov 2014 04:17 PM PST

I'm a teacher - when I mark students papers submitted electronically in Word I insert a wingdings tick beside correct answers.  The paste options dropdown box then displays just below the tick.  This often hides the text on the line below - annoying because then I can't read it without clicking somewhere else in the document.  Is there any way to make the options box display above the pasted item so it hides text I've already marked and doesn't hide the text I'm about to read?  I don't want to get rid of the options box altogether because sometimes I need it, but moving where it displays would solve the problem.

Lost Office 2007

Posted: 17 Nov 2014 03:47 PM PST

Split from this thread.

After installing Windows 8.1 my office 2007 full package disappeared. I cannot retrieve my files (documents). It is though I do not have Office on my Dell Laptop Inspiron E1705, which previously had XP. Please help.

PeterG *** Email address is removed for privacy ***

How to save so that only Summary Tasks are viewed Microsoft Project

How to save so that only Summary Tasks are viewed Microsoft Project

How to save so that only Summary Tasks are viewed

Posted: 08 Nov 2005 07:03 AM PST

In article <com>,
"1Kings1821" <microsoft.com> wrote:
 

Bible Person,
There is no way to "lock out" select information from a Project file. If
your customer has Project installed, they will be able to view any data
they want. Therefore you will need to provide them with either hard copy
only or a non-Project version of the information.

One method is to save the file as a web page (File/Save As). You should
also visit our MVP website at: http://www.mvps.org/project/faqs.htm
and see FAQ 16 - Project Viewer.

Hope this helps.
John
Project MVP

Changing information when hovering over a task bar?

Posted: 08 Nov 2005 06:54 AM PST

In article <com>,
"New2Project" <microsoft.com> wrote:
 

New2Project.
To the best of my knowledge, that information is non-editable.

John
Project MVP

preserve my dates

Posted: 08 Nov 2005 04:05 AM PST

ouch..

I guarantee it will not fail, I built Liquidated Damages into the spec.

"davegb" wrote:
 

Templates in Project

Posted: 07 Nov 2005 09:25 PM PST

Hi,
I got the path where templates are saved :\Doents and Settings\User
ID\Application Data\Microsoft\Templates

now i can directly insert it.
thanks a lot
--
Manmeet Chaudhari
Technical Trainer
Maestros Mediline Systems Ltd
Mumbai



"Gérard Ducouret" wrote:
 

S-Curve Utility in MS Project

Posted: 07 Nov 2005 09:19 PM PST

Manmeet,
If you send me your email address, I may have just the thing you are looking for.

Dennis
freeserve.co.uk

On Tue, 8 Nov 2005 01:03:07 -0800, "Manmeet Chaudhari" <microsoft.com>
wrote:
 

Split View and Grouping/Filtering

Posted: 07 Nov 2005 01:04 PM PST

thanks Mike.



"Mike Glen" wrote:
 

Does Project 2000 run on Windows XP Home?

Posted: 07 Nov 2005 12:55 PM PST

It won't because all copies of Office Software need to be registered per machine/user.



"Nigel Freeney" <com> wrote in message news:%23cMXwu%phx.gbl... 

Set a base line for a project

Posted: 07 Nov 2005 12:11 PM PST

Hmmmmm... Don't know. I suspect that Project cannot produce a baseline
with just the start dates - it's got to get the finish date from somewhere.
Any way, try importing the start an finish dates and then run the baseline.

Mike Glen
Project MVP

Tony F wrote: 

Local user keeps getting the login screen

Posted: 07 Nov 2005 12:10 PM PST

I will post in the server forum. I did not see this as a server issue,
rather a general one.
Thanks,
Bryan

"Mike Glen" wrote:
 

Split/Bottom Screen Filter

Posted: 07 Nov 2005 11:10 AM PST

No :(

Mike Glen
Project MVP

Hadi wrote: 

updating MS-project's actual work column with hours from MS-Excel

Posted: 07 Nov 2005 10:21 AM PST

Hi Jan:

Thanks for your response. I did change the date to October 24, which is a
Monday but still getting same error message. I did mention the input in
minutes. The error description I get is "the argument value is not valid"

Many thanks,
sripri96


"Jan De Messemaeker" wrote:
 

Calendar View - Day or Week

Posted: 07 Nov 2005 09:20 AM PST

At least I can eliminate MSProject as a tool to use for this purpose. Some
other poor er will get the assignment!...M

"Chris Marriott" wrote:
 

How can I archive subprojects to save the project details?

Posted: 07 Nov 2005 07:50 AM PST

Hi Deb,

Well... a master project just has place markers for the sub-projects.
Provided the sub-project is open when you make changes in the master, it is
the sub-project that is updated. You can thus delete the sub-project from
the master, and save the sub-project in some archive folder.

Mike Glen
MS Project MVP

Deb wrote: 

Project Update

Posted: 07 Nov 2005 04:34 AM PST

Thanks, Your question was thought provoking enough that I figured it out.
Thanks again!

"Haris Rashid" wrote:
 

Exchange 2007 store.exe crashes due to bad Public folder database - Microsoft Exchange

Exchange 2007 store.exe crashes due to bad Public folder database - Microsoft Exchange

Exchange 2007 store.exe crashes due to bad Public folder database

Posted: 29 Nov 2007 10:47 AM PST

I create the database object after deleting AD object. I tried creating
thorougn EMC as well as PS cmdlet. I event rebooted the server after
creeating PF DB and before mounting it for the first time.

"John Fullbright" wrote:
 

Exchange Server 2007 SP1

Posted: 28 Nov 2007 01:00 PM PST

That's great. Just had a mail from them as well. This will be a fun pakced
weekend in the lab!


"msocsman" <net> wrote in message
news:com... 

ambiguous SMTP proxy SystemMailbox Event ID 9549

Posted: 28 Nov 2007 09:07 AM PST

Hello Lan,

Thank you for reply.

I hope everything is going well.

If there's anything else I can do for you, please do not hesitate to let me
know.

Thank you and have a nice day,

Best regards,

Terence Liu(MSFT)

Microsoft CSS Online Newsgroup Support

Get Secure! - www.microsoft.com/security

================================================== ===
This newsgroup only focuses on SBS technical issues. If you have issues
regarding other Microsoft products, you'd better post in the corresponding
newsgroups so that they can be resolved in an efficient and timely manner.
You can locate the newsgroup here:
http://www.microsoft.com/communities/newsgroups/en-us/default.aspx

When opening a new thread via the web interface, we recommend you check the
"Notify me of replies" box to receive e-mail notifications when there are
any updates in your thread. When responding to posts via your newsreader,
please "Reply to Group" so that others may learn and benefit from your
issue.

Microsoft engineers can only focus on one issue per thread. Although we
provide other information for your reference, we recommend you post
different incidents in different threads to keep the thread clean. In doing
so, it will ensure your issues are resolved in a timely manner.

For urgent issues, you may want to contact Microsoft CSS directly. Please
check http://support.microsoft.com for regional support phone numbers.

Any input or comments in this thread are highly appreciated.
================================================== ===

This posting is provided "AS IS" with no warranties, and confers no rights.

--------------------
| From: "Ian Bird" <noemail>
| References: <phx.gbl>
<phx.gbl>
| Subject: Re: ambiguous SMTP proxy SystemMailbox Event ID 9549
| Date: Fri, 30 Nov 2007 12:31:57 -0000
| Lines: 173
| X-Priority: 3
| X-MSMail-Priority: Normal
| X-Newsreader: Microsoft Outlook Express 6.00.2900.3138
| X-MimeOLE: Produced By Microsoft MimeOLE V6.00.2900.3198
| X-RFC2646: Format=Flowed; Original
| Message-ID: <#phx.gbl>
| Newsgroups: microsoft.public.exchange.misc
| NNTP-Posting-Host: 206.163.skyline-networks.net 212.13.206.163
| Path: TK2MSFTNGHUB02.phx.gbl!TK2MSFTNGP01.phx.gbl!TK2MSF TNGP04.phx.gbl
| Xref: TK2MSFTNGHUB02.phx.gbl microsoft.public.exchange.misc:5310
| X-Tomcat-NG: microsoft.public.exchange.misc
|
| Hi Terence
|
| Thanks for your help on this I will let you know if it fixes it.
|
| Regards
| Ian
|
|
| "Terence Liu [MSFT]" <microsoft.com> wrote in message
| news:phx.gbl...
| > Hello Ian,
| >
| > Thank you for posting here.
| >
| > According to your description, I understand that you get event error
9549
| > on Exchange 2003. If I have misunderstood the problem, please don't
| > hesitate to let me know.
| >
| > Based on my research, this problem occurs because the Active Directory
| > Users and Computers MMC snap-in does not generate a notification when
you
| > specify the e-mail address for an object in Active Directory that you
| > select in the Find dialog box. Therefore, Exchange Extension
| > (Maildsmx.dll)
| > does not check for uniqueness even though the new e-mail address is a
| > duplicate.
| >
| > To work around this problem, use the Active Directory Find feature to
make
| > sure that the e-mail address that you specify is not used by any other
| > object. Do this when you want to change the e-mail address for an
object.
| >
| > If the issue persists, it may caused by the Duplicate system mailboxes.
| > Please try the following step:
| >
| > 1. Go to Microsoft Exchange System Objects OU in the Active directory
| > users
| > and computers, please remove the system mailbox {GUID} with CNF:###
| >
| > Note: The GUID is {2C9371BF-68C2-4F6F-8158-1C8A211737AD}
| >
| > 2. Force the domain controller tion in the local site and run
| > cleanup agent on the exchange system manager. If you see the second
system
| > mailbox disconnected. Right click it and purged it.
| >
| > I hope these steps will give you some help.
| >
| > Thanks and have a nice day!
| >
| > Best regards,
| >
| > Terence Liu(MSFT)
| >
| > Microsoft CSS Online Newsgroup Support
| >
| > Get Secure! - www.microsoft.com/security
| >
| > ================================================== ===
| > This newsgroup only focuses on SBS technical issues. If you have issues
| > regarding other Microsoft products, you'd better post in the
corresponding
| > newsgroups so that they can be resolved in an efficient and timely
manner.
| > You can locate the newsgroup here:
| > http://www.microsoft.com/communities/newsgroups/en-us/default.aspx
| >
| > When opening a new thread via the web interface, we recommend you check
| > the
| > "Notify me of replies" box to receive e-mail notifications when there
are
| > any updates in your thread. When responding to posts via your
newsreader,
| > please "Reply to Group" so that others may learn and benefit from your
| > issue.
| >
| > Microsoft engineers can only focus on one issue per thread. Although we
| > provide other information for your reference, we recommend you post
| > different incidents in different threads to keep the thread clean. In
| > doing
| > so, it will ensure your issues are resolved in a timely manner.
| >
| > For urgent issues, you may want to contact Microsoft CSS directly.
Please
| > check http://support.microsoft.com for regional support phone numbers.
| >
| > Any input or comments in this thread are highly appreciated.
| > ================================================== ===
| >
| > This posting is provided "AS IS" with no warranties, and confers no
| > rights.
| >
| > --------------------
| > | From: "Ian Bird" <noemail>
| > | Subject: ambiguous SMTP proxy SystemMailbox Event ID 9549
| > | Date: Wed, 28 Nov 2007 17:07:55 -0000
| > | Lines: 65
| > | X-Priority: 3
| > | X-MSMail-Priority: Normal
| > | X-Newsreader: Microsoft Outlook Express 6.00.2900.3138
| > | X-MimeOLE: Produced By Microsoft MimeOLE V6.00.2900.3198
| > | X-RFC2646: Format=Flowed; Original
| > | Message-ID: <phx.gbl>
| > | Newsgroups: microsoft.public.exchange.misc
| > | NNTP-Posting-Host: 206.163.skyline-networks.net 212.13.206.163
| > | Path: TK2MSFTNGHUB02.phx.gbl!TK2MSFTNGP01.phx.gbl!TK2MSF TNGP02.phx.gbl
| > | Xref: TK2MSFTNGHUB02.phx.gbl microsoft.public.exchange.misc:5278
| > | X-Tomcat-NG: microsoft.public.exchange.misc
| > |
| > | Hi All,
| > |
| > |
| > |
| > | I have had this show up on the server it doesn't appear to be cause
any
| > | issues with email between the 2 sites or outbound.
| > |
| > |
| > |
| > | Severs
| > |
| > |
| > |
| > | -Server 2003 Standard SP2
| > |
| > | -Exchange 2003 standard.
| > |
| > | -Both are DC's and GC
| > |
| > |
| > |
| > | Event Type: Error
| > | Event Source: MchangeIS
| > | Event Category: General
| > | Event ID: 9549
| > | Date: 24/10/2007
| > | Time: 14:23:36
| > | User: N/A
| > | Computer: SERVER1-LDN
| > | Description:
| > | An ambiguous SMTP proxy
| > SystemMailbox{2C9371BF-68C2-4F6F-8158-1C8A211737AD}
| > | was found on 0x2 mailboxes in the DS. The store cannot map this SMTP
| > proxy
| > | to a unique Mailbox GUID.
| > |
| > | For more information, click
| > http://www.microsoft.com/contentredirect.asp.
| > |
| > |
| > |
| > | I did a quick Google search and found the following Kb article
| > |
| > |
| > |
| > | http://support.microsoft.com/kb/316622/en-us
| > |
| > |
| > |
| > | Am not sure, That post talks about the problem being linked to the
| > | systemmailbox being absent, the problem here seems to be more along
the
| > | lines of there being an ambiguous or multiple systemmailboxes.
| > | The Error message isn't the same either, nor the error code.
| > |
| > | However it might well fix the problem anyway, just a little unsure
and I
| > | would hate for it to up potentially both Exchange Servers!
| > |
| > |
| > |
| > | Please let me know if you need anymore information
| > |
| > |
| > |
| > | Ian Bird
| > | Network Engineer
| > | Alliance Solutions
| > |
| > |
| > |
| >
|
|
|

Second 2003 server - receive but no send

Posted: 28 Nov 2007 08:31 AM PST

Hi
Well tried a reboot and tried messing with the SMTP virtual server over the
weekend, but still no joy. I am considering a reinstall. I ahve been over
every setting I can find and it all looks pretty reasonable.
Thanks for your input
Lewej

"Ed Crowley [MVP]" wrote:
 

Repairing a user's account

Posted: 28 Nov 2007 07:00 AM PST

No, but I did put her Exchange account in cached mode and it corrected the
issue. I was going to wait a day or so and then run the scanpst.exe on the
ost.



I was just looking to see if there's a tool that I can use to verify the
integrity of a user's account without having to play the 'cache' game.



Tom


"Mark Arnold [MVP]" <org> wrote in message
news:com... 

Changed Email Domain - Auto Reply on old addresses Options

Posted: 28 Nov 2007 02:32 AM PST

On Wed, 28 Nov 2007 07:23:04 -0800, Mark Hardcastle
<microsoft.com> wrote:
 


You can't set up an auto-reply in Exchange/Outlook that's just for the
old domain. When you swap to the new domain it becomes primary and any
auto-reply gets set up for the whole account.

OWA 2007 mailbox access denied

Posted: 28 Nov 2007 01:49 AM PST

Dear Ed, here's the event log message

Event Type: Error
Event Source: Mchange OWA
Event Category: Proxy
Event ID: 57
Date: 11/28/2007
Time: 12:51:05 PM
User: N/A
Computer: 64R2E30-2
Description:
Outlook Web Access is not available for this mailbox. If the problem
continues, contact technical support for your organization and tell them the
following: The Client Access server https://64r2e30-2.star.edu/owa, running
Microsoft Exchange version 8.0.685.24, attempted to find a Client Access
server to proxy Outlook Web Access traffic for mailbox /o=Star Messaging
System/ou=Exchange Administrative Group
(FYDIBOHF23SPDLT)/cn=Recipients/cn=aaa. The service discovery failed in
looking up the Client Access server in the target Active Directory site.

Additional information: Service discovery threw an exception.

Exception: Microsoft.Exchange.Data.Storage.ServerNotInSiteExc eption
The server MAILBOX1.star.edu does not belong to a site.)

Callstack:
at Microsoft.Exchange.Data.Storage.ServiceTopology.Ge tSite(String
serverFullyQualifiedDomainName)
at
Microsoft.Exchange.Clients.Owa.Core.ProxyUtilities .IsBestCasLocal(ExchangePrincipal exchangePrincipal)
at
Microsoft.Exchange.Clients.Owa.Core.ProxyUtilities .GetRequestExecution(OwaContext owaContext, ProxyUriQueue& proxyUriQueue)
at
Microsoft.Exchange.Clients.Owa.Core.RequestDispatc her.GetRequestExecution(OwaContext
owaContext, RequestExecution& requestExecution, ProxyUriQueue& proxyUriQueue).

For more information, see Help and Support Center at
http://go.microsoft.com/fwlink/events.asp.




"Ed Crowley [MVP]" wrote:
 

Public Folder replication exchange 2003

Posted: 28 Nov 2007 01:20 AM PST

tion depends on the amount of data, but if it isn't happening there
are a lot of things to check, starting with messaging connectivity between
the servers. First, the hierarchy must te, and then the content will
follow. You can monitor whether this is happening by watching the SMTP
queues, becuase public folder tion happens through messging.
--
Ed Crowley
MVP - Exchange
"Protecting the world from PSTs and brick backups!"

"roadrunner84" <at(donotspam)> wrote in message
news:com... 

Journalling on second Exchange server 20003 - Help please

Posted: 27 Nov 2007 07:43 AM PST

Hi Mark
Sorry - a badly worded question. I did not know how to ensure the mailbox I
was setting up was on the second storage group - but I gave it a bash ands
found it was a drop down box when setting up the email address.
Thanks
Lewej

"Mark Arnold [MVP]" wrote:
 

emails in sub folders

Posted: 27 Nov 2007 07:41 AM PST

other than this:
Product: Windows Operating System
ID: 1058
Source: Userenv
Version: 5.2
Symbolic Name: EVENT_GPT_NOTACCESSIBLE
Message: Windows cannot access the file gpt.ini for GPO %1. The file must be
present at the location <%2>. (%3). Group Policy processing aborted.

I now seem to be the only one to have not recovered data.


"Mark Arnold [MVP]" wrote:
 

Exchange 2003 Lifecycle Extended Support

Posted: 27 Nov 2007 06:58 AM PST

You try to help and whaddya get?

Many RPC calls

Posted: 27 Nov 2007 01:40 AM PST

Ramon Niese <nl> wrote: 

In Terminal Services, that isn't even an option, sadly. 

OK. That's going to cause problems.
 

All I can suggest is dealing with the mailbox sizes/# of items, to see if it
resolves (or even just alleviates) the problem.

 

Share Contacts when Using OWA

Posted: 23 Nov 2007 04:31 PM PST

GlobalTek <microsoft.com> wrote: 

No prob :) 

Missing pictures in OWA - Rich Text Messages

Posted: 23 Nov 2007 09:59 AM PST

Not in this case.
--
Mike


"Ed Crowley [MVP]" wrote:
 

Exchange 2007 rollup install question

Posted: 21 Nov 2007 08:03 AM PST

Then why does it never call??

"Andy David {MVP}" <com> wrote in message
news:com... 

Mail headers stripped in IMAP client

Posted: 21 Nov 2007 07:53 AM PST

The messages are not corrupted.

Corrupted term simply means those messages for which some header information
is not seen.

Those mesages are perfectly seen in Outlook with all the headers intact but
not in IMAP client. All the new mails delivered to this mailbox are seen
perfectly fine with all the headers.
--
Prashant


"Ed Crowley [MVP]" wrote:
 

Load Blanacing in Ex2007

Posted: 20 Nov 2007 10:58 PM PST

On Wed, 21 Nov 2007 04:30:01 -0800, Alan Tang
<microsoft.com> wrote:
 

No load balancing mailboxes.

good EX2007 administration book

Posted: 20 Nov 2007 08:15 AM PST

There are a lot of mid to advanced books out there. If you've done a
MOC course on Exchange it should be enough to get you started. Jim
McBee's, Scott Schnoll or even
http://www.amazon.com/Microsoft-Exchange-Server-Administrators-Consultant/dp/0735619786
will help.
www.microsoft.com/exchange is the first port of call for you though so
you know what on earth it is you're dealing with.

Start/Stop Scripts for Exchange Server 2007

Posted: 20 Nov 2007 01:38 AM PST

Thanks Rene,
Do you have any idea of the order these services are meant to start (and to
stop).
Regards
Nicolas


"Rene Frenger" <microsoft.com> a écrit dans le
message de news: com... 

Exchange Server 2003 Automatic Maintenance

Posted: 20 Nov 2007 01:32 AM PST

Nicolas Macarez <fr> wrote: 

OK - so nothing to worry about, then, right?
 

Someone must have - there isn't one in there by default. 

change themes

Posted: 19 Nov 2007 08:06 AM PST

Salve
i have delete folder create and re-create it new from copy base themes
i have reboot FE end HUB exchange , ISA server, and reset temporaney etc. on
my client

now on my client have the old themes but i use another client i have the new
themes

why??

"saba" wrote:
 

Message in Categorizer

Posted: 19 Nov 2007 05:07 AM PST

Yes, you'll need to turn up diagnostic logging to see them. You could start
with:

http://support.microsoft.com/kb/251746/en-us


"Salim-SESO" <microsoft.com> wrote in message
news:com... 

Microsoft Word - Emailing word documents connected by hyperlinks...

Microsoft Word - Emailing word documents connected by hyperlinks...

Emailing word documents connected by hyperlinks...

Posted: 17 Nov 2014 02:08 PM PST

Hi everyone,

Thanks in advance for any assistance anyone can give me. I have created a pretty complex set of instructions, starting with an 'Overview' document that hyperlinks to about 8-9 other documents. I can put all these doc's in a file (compressed) and send it to whomever, but when it get's there, the hyperlinks are dead.

How can I email this entire file with all the hyperlinks intact?

Thank you!

Winrland

Text box that will repeat in the same position on each page of a multipage document

Posted: 17 Nov 2014 01:37 PM PST

I am trying to create a text box that will repeat in the same position on each page of a multipage document. Basically I want to place my name and address on the lower left hand side of each page. The text box will be located outside of the margins of the page but in the printable area. I can not figure how to do it. If there is another way to do this other than a text box i would appreciate the help.

Rightclick Autocorrect in Word 2013

Posted: 17 Nov 2014 12:50 PM PST

OK, reality check.

If Microsoft is claiming that those of us who prefer previous versions of Office are dinosaurs, then how come their development team is going backwards to pre-historic errors and functionality with their latest (and by far the worst) version of Word - Word 2013?

One of the most beneficial and frequently used features of their previous Word versions was the right-click Autocorrect function, which many of us (if not all of us, if we think of the executive ranks), used multiple times per day.

now, we have two options - keep a running handwritten list of needed auto correct entries and hand to our secretary to enter at the end of the day - about a page or so per day - or, interrupt any valuable work to go through multiple irrational layers of menus to reach the box where entries can be made and retye all of them one by one...  as in the stone age.

What a perplexingly stupid thing to remove - is there anything we can do to bring this valuable feature back on our laptops?

Updated to WORD 2013 and lost half of tracked changes

Posted: 17 Nov 2014 12:30 PM PST

I was editing an 82-page document and tracking changes successfully.  While I was away with the document still up, the computer guys came in and updated my system and I'm now working with 2013.  Now the document only shows half of my changes!?  I spent over 10 hours on it! 

I'm going to assume I saved the document before I left, and that the computer guys would've done the same before shutting down.  Could there be any other explanation for not being able to see the changes?  Are there any tricks I can try?  A way to recover the document from it's last state?  Anything?!  I've got "All Markups" selected and don't even see those changes in the left "Revisions" pane.

Thanks,

 

Word 2013 replaced Word 2010 on my computer

Posted: 17 Nov 2014 11:27 AM PST

Split from this thread.

This morning, Microsoft installed WORD 2013 into my computer. In doing so, they also uninstalled

WORD 2010 which was in the computer. Now I cannot access either my documents or e-mail attachments. When I try, a box appears saying:"Click-2-Run Virtualization Handler". How can I correct this so that I can again access my documents and e-mail attachments? Thanks for your help.

D. Gorman

*** Email address is removed for privacy ***

Microsoft Directory Merge issues

Posted: 17 Nov 2014 11:17 AM PST

Doing a directory merge using a table I created in Word.   Three columns across (landscape)  several sections down.  I am bringing this in from a existing document in Excel. (columns are the different program passwords and rows are each student.

When I enter the criteria the first one comes out perfect, but it post the same information in the next two columns instead of moving to row 2 for column 2 and so on.   I am enclosing a copy of the document I am working with as a sample.  I am hoping there is a solution that I am just not seeing or able to locate .  Thanks, Jodi

This is what I am entering and this is what I am getting after the merge:

Same student all across, when I would like it to pull from the next row(2,3,4 etc... in excel)?  Can anyone help Please!

Word can't open template

Posted: 17 Nov 2014 11:09 AM PST

Split from this thread.

Hello,

I have been working on a Word document generated from a template (ftp://ftp.springer.de/pub/tex/latex/llncs/word/splnproc1110.zip) for a few months, and I keep both the document and its template on OneDrive. For about a week now, when I try to open the document, Word gets stuck at the splash screen trying to open the template, and I have to force-close it. Opening the file in the Safe Mode works, but I don't get the toolbars that the template provides. I appreciate any help with this.

Thank you!

Why is Word ignoring Read-Only file attribute?

Posted: 17 Nov 2014 11:07 AM PST

I can use Windows File Explorer to enable "Read Only" on a Word document stored on my OneDrive, then open the document in Word, change it and save it.  The original read-only file has now been modified.  What I'm I missing here?

Editing is in English United States - not UK

Posted: 17 Nov 2014 11:07 AM PST

Editing is currently in United States English rather than English UK.

Going to Languages tab in Control Panel English UK is not given as an option.

Any suggestions?

PLEASE HELP!!!!! Word 2010, "paste destination" button/option missing, undable to apply style gallery and have it work

Posted: 17 Nov 2014 10:08 AM PST

Hello, can someone PLEASE tell  me how to "paste with "DESTINATION" formatting" in word 2010.  The only options are "keep source, merge formatting, and "keep text only."  I have searched all over the internet and this site and I cannot find any help.  I send documents from person to person and they come back to me all goobed up!!  With office 2007, I never had a problem as I was able to apply my own style gallery to fix the formatting, however... with 2010, this is "gone," and I am at a TOTAL loss of how to copy/paste with "destination" formatting.  
I have seen instructions for "macros," but I am not familiar with macros at all, so those directions have been "totally useless!"  I AM SOOOO FRUSTRATED THAT MS OFFICE WOULD 'REMOVE' THE DESTINATION FORMATTING OPTION,' for what reason I have nooo idea.  
I hope someone can help me and if possible (provide screen shots).  I am NOT a programmer, so I do not understand macros, and/or changing something like my "add in.com settings"
I simply want to "copy/paste" with "destination formatting" AND.... be able to set a particular style gallery and then "apply it to a document."  Again... this is NOT working properly in word 2010.  
PLEASE... CAN SOMEONE HELP ME!!!!
Thank You in advance.

Word Macro Opens Multiple Instances

Posted: 17 Nov 2014 09:30 AM PST

I was expecting worse given that I've been dragging some of these macros around since 95 :)

My macro opens a different instance of Word whenever it hits this:

WordBasic.FileOpen Name:="c:\windows\winword\merge\" + FilName$, ReadOnly:=0, PasswordDoc:="", PasswordDot:=""

FirstWin$ = WordBasic.[WindowName$]()      'get the title of the current window

I want to stay within a single instance of Word. How is that done?

TIA for any help.

Office professional 2000, word

Posted: 17 Nov 2014 09:07 AM PST

Related to: Community Moderator List - Windows

I am using Windows xp, Office 2000 professional.  I recently copied the body of an email into Word, and now every time I open Office, that document appears instead of a blank page.

How do I delete that page?

Thanks

Word document not printing

Posted: 17 Nov 2014 07:21 AM PST

Posted twice in error.

Word has run into an error that is preventing it from working correctly

Posted: 17 Nov 2014 07:09 AM PST

I'm trying to open Microsoft Word and I'm getting the following error message:

We're sorry, but Word has run into an error that is preventing it from working correctly. Word will need to be closed as a result.

Would you like us to repair now?

I tried to repair multiple times. I ran the trouble shooter and tried all options. I'm still getting the same message. Any ideas to get Word to work?

Word document not printing

Posted: 17 Nov 2014 07:04 AM PST

A word 2010 document will not print, other documents print with no issue. What makes the document different is it has an email address in the footer.

I open up the document go to File > Print - a small window opens displaying Microsoft Word in the title bar, Sender's email with the email address in the window. You have the option to select OK or Cancel, but the cursors is displaying the busy orb.

If necessary I can post the document.

Word TOC column

Posted: 17 Nov 2014 06:59 AM PST

When I convert a TOC from 1 column to 2 columns, the page numbers are now shown.  How do I fix it?

Convert document properties to text?

Posted: 17 Nov 2014 05:50 AM PST

Is it possible to convert document property values to plain text?  I need to create a macro to select all doc properties in the document & convert them to plain text and can't figure out a way to do that (it doesn't convert when I treat it like a field & use Alt-A (to select all) followed by Ctrl-Shift-F9 (to convert field to text). 

Thank you for you help!

MS Office items pinned to taskbar icons don't work?

Posted: 17 Nov 2014 03:44 AM PST

I can pin files to the Word and Excel icons on the taskbar, but when I right-click on either of the icons and then click on a pinned file, the spinning circle appears for a few seconds, and then nothing else happens.  It is the same for "Recent" files that appear when the icons are right-clicked.  Other taskbar icons, like File Explorer and IE seem to work ok. 

Unable to Insert a Chart into Word/Powerpoint

Posted: 17 Nov 2014 03:30 AM PST

I was trying to insert a chart in Word and when I select the chart type and click OK it just asks me to select the chart type over an over.  I also tested it in Power Point with the same result.  I get no error messages of any kind, it just places me in a loop unless I cancel out.

I tried to repair the installation, and when that didn't work, I uninstalled and re-installed Office.  I'm at a loss of what else I might be able to try and fix this or work around it.

Exit custom bullet list style problem

Posted: 17 Nov 2014 02:30 AM PST

Hello everyone,

I have created a custom bullet list style for a company wide used normal.dotm which uses different indentions and colors than the standard in word.
Basically I designed a style like described here: http://shaunakelly.com/word/bullets/controlbullets20072010.html
(actually I changed the "List Bullet Styles" and added the first level to the Quick Style Gallery)

Everything works fine so far beside for one problem:

The standard bullet list of word can be easily exited with pressing return twice or deleting the last bullet point. If doing so Word automatically changes the style of the next line to "Normal" style and begins a new paragraph.

With our own bullet style this does not happen. When pressing return twice, while being in the list, Word at first look seems to behave the same: it removes the bullet list and set the cursor to the beginning of the new line. BUT it does not change the style of the new line to Standard but instead keeps the List Bullet Style active. This happens for every new line and paragraph. The custom style stays active but is just not painting the bullet points any more.

Of course its possible to change the style in the new line manually to "Normal" again. Our fear is though that most users will just not do this and not even be aware of the problem.

So the question is: Is there any way (VBA included) to make Word behave like with its own bullet points, even we use our custom designed style?

Thank you very much in advance already!
Thomas

PS: just for completeness: I have also used VBA to handle the FormatBulletDefault event when the bullet point button is pressed, but this seems not to affect the previous described problem.

Line Randomize in MS Word

Posted: 16 Nov 2014 10:48 PM PST

Dear Expert,

Suppose,

here 4 lines written in ms word that represent a set of question.

1. AAAAAAAAAAAAAAAAAAAAA

(a) Love (b) Hate (c) mutual (d) live

2.BBBBBBBBBBBBBBBBBBBBBBBB

(a) play (b) sky (c) milk (d)world

3.CCCCCCCCCCCCCCCCCCCCCCCC

(a) Mars (b) Apple (c) Game (d)Hot

4. EEEEEEEEEEEEEEEEEEEEEEEEEEEE

(a)Cat (b) Cow (c) Tiger (d) Home

(please tell me the short cut way or any logical treatment)

I want make more set of question within the same data/information. I mean the number of questions  will be randomized in a single click with data they held.

like:

 

2.BBBBBBBBBBBBBBBBBBBBBBBB

(a) play (b) sky (c) milk (d)world

3.CCCCCCCCCCCCCCCCCCCCCCCC

(a) Mars (b) Apple (c) Game (d)Hot

1. AAAAAAAAAAAAAAAAAAAAA

(a) Love (b) Hate (c) mutual (d) live

4. EEEEEEEEEEEEEEEEEEEEEEEEEEEE

(a)Cat (b) Cow (c) Tiger (d) Home

thanks in advance

corrupted new document template

Posted: 16 Nov 2014 10:19 PM PST

I'm using Word 2010.  When I open a blank document, there are no top or bottom margins.  I am unable to click and drag the margins on the ruler and when I open the page layout dialogue box it shows that the margins are the normal default.  How do I fix this?

Calibri has Serifs

Posted: 16 Nov 2014 10:07 PM PST

Hello,

I recently installed Office 365 on my computer, and it has come to my attention that the Calibri font is not showing up as it should. The Calibri that shows up on my computer has serifs, and is most likely using a different font in place of the actual Calibri font. 

Does this mean that Calibri somehow didn't install properly? The proper font shows up on other Office products on my computer, as well as Word 2013 on my laptop.

Running Office 2013 under application verifier

Posted: 16 Nov 2014 08:54 PM PST

As a security measure, I run many programs under Application Verifier. As exploits, by definition, rely on bugs, my intention is that Application Verifier will force the program to crash long before successful RCE begins.

However, if I try to run any part of Office 2013 ( e.g. Word ), Word will crash long before the UI even initializes. 

Is/was Office tested under Application Verifier?

How might I use it as such?

Yes, I expect crashes. I happily file bug reports whenever I can.

Puzzling development

Posted: 16 Nov 2014 07:30 PM PST

I had to remove several programs to make room on my hard drive, which was maxed out.  (The only one I remember is Scribus.)  After I did this, I found that about half of my Word documents were gone, and the other half now have a Wordpad icon next to the file titles instead of the Word icon.  Also, the Word desktop icon disappeared.  I didn't realize there was any connection between Word and Scribus.  If I had known, I wouldn't have deleted it.  Or was one of the other programs I deleted responsible for what happened?  Most important, is there any way I can recover my missing files?

Thank you.

Word 2013 splits words when wrapping text

Posted: 16 Nov 2014 06:03 PM PST

Words in bulleted text are being split (e.g., the word "stones" in the following sentence):





I haven't noticed this problem in ordinary paragraphs.


(Windows 7 32 bit system)


This doesn't quite fit any other issues I've seen posted.


Thanks for the help!

Word Starter

Posted: 16 Nov 2014 05:42 PM PST

My files have recently stated that there are problems with the content.  This has continued to impact files but not all.  When opening the help it state the file is corrupt and cannot open.  When I check the yes button to recover the response is there are problems with the contents.  I have tried to go back about four days and reset the computer but that has no impact.

Any help you can provide would be greatly appreciated.  There are a number of files that wouldn't open.  I had also saved everything on a portable hard drive but that information is also not working.

Thank you for any and all help. 

Multilevel list in Outline view

Posted: 16 Nov 2014 05:12 PM PST

Split from this thread.

Hello dear Suzanne and others!

I'd like to ask a slightly different question. I am on word 2013. I made a bullet list using the bullet list icon. 

In my bullet list, I sometimes wanted to make subentries, so I simply pressed the TAB key to indent one further.

Now I have a magnificient 5 pages list (yesyes) and can't sort it alphabetically as I intended to, because the pseudo "2nd level" indents are also sorted independently of the pseudo "1st level" bullets I had made. When I go into "Outline view" and click 1st level, 2nd level or whatever level, my page just becomes blank. I guess that no levels have been defined at all. 

You understand right, that I haven't created no numbered list style before working on this. 

I only used the bullets icon (once) and the TAB key to move between my (at least visual) levels.

Any help would be really welcome as to how to solve this problem without having to redefine everything manually (which I also didn't really understand how to do, as the fake "2nd level" bullets already are recognized as smth different when I test the option "Change list level"...)

Really really thanks for help!

Lionel

How can I delete offline printers?

Posted: 16 Nov 2014 04:15 PM PST

When printing a Word 2010 document using File>Print, the default printer's name is shown with a drop-down list of other printers recognized by the computer.  Many of these no longer exist, having been replaced by newer printers, but their names remain, labeled Offline.  I've accumulated 7 such phantom printers and can find no way to remove mention of them.  Any ideas on how to remove them from the list?
Subscribe to: Posts (Atom)