Pages

Search

Setting up raw prinit queue on RHEL 5, how? - Forums Linux

Setting up raw prinit queue on RHEL 5, how? - Forums Linux


Setting up raw prinit queue on RHEL 5, how?

Posted: 02 Apr 2008 08:03 AM PDT

On 2 Apr, 18:01, Allen Kistler <moc> wrote: 

You, umm, have never read "The Luxury of Ignorance" by Eric Raymond,
have you? It's about the CUPS interface.

And notice the guidelines at the bottom, which CUPS still violates
every single one of.

error in partition table leaves some space inaccessible

Posted: 31 Mar 2008 04:32 AM PDT


<com> wrote in message
news:googlegroups.com...
On Mar 31, 3:34 pm, "philo" <net> wrote: 
But how do you edit the partition table to correct the end address of
the extended partition? I don't remember anything in fdisk like that.


I'd not use fdisk at all.

Also, before you use any disk editing utilities you need to really double
check to see
if there is an error at all


A Unix / Linux / BSD / Minix / OSX fix I would like to see in the next 6 months: support for installing to USB drives (Live CDs / DVDs)...

Posted: 29 Mar 2008 03:25 AM PDT

Max Power wrote: 

It is really more of a rescue disk, not like to linux live disks.
Just use cd no 1 for installation
 

--
Martin

LILO map-file damaged ?

Posted: 26 Mar 2008 12:46 PM PDT

Mikhail Kuzminsky wrote:
 

Have a look at :http://tldp.org/HOWTO/Hard-Disk-Upgrade/prepare.html
If you've done your lilo configuration right... it'll work.



--

Jerry McBride (us)

ipv6 route

Posted: 25 Mar 2008 12:10 AM PDT

Kernel IPv6 routing table
Destination Next
Hop Flags Metric Ref Use Iface
::1/128
* U 0 9 0 lo
2001::1/128
* U 0 3 0 lo
2001::/64
* U 256 0 0 eth0
fe80::208:a1ff:fe8a:544d/128
* U 0 0 0 lo
fe80::212:3fff:fe2c:38bf/128
* U 0 0 0 lo
fe80::/64
* U 256 0 0 eth0
fe80::/64
* U 256 0 0 eth1
ff00::/8
* U 256 0 0 eth0
ff00::/8
* U 256 0 0 eth1
*/0
* U 256 0 0 eth1
*/0
* UD 256 0 0 eth0
*/0
* UD 256 0 0 eth1


I want to redirect the ipv6 packets destined to 2001::3/64 through my
loopback address.

Bill Mar wrote: 

Overriding "Wake-on-LAN" BIOS settings in the running Linux?

Posted: 20 Mar 2008 09:29 AM PDT

Nico Kadel-Garcia <com> wrote: 

Solaris for SPARC has a command "eeprom" to set PROM
variables. Since the BIOS is in EEPROM I just logged into
a Solairs x86 host to compare. It does have an "eeprom"
binary but it writes to a file not to the BIOS. Sigh. It also
points to the grub man pages.

LinuxBIOS equals goodness ...

External disk doesn't boot. Install GRUB on USB key?

Posted: 18 Mar 2008 01:46 PM PDT

On Mar 20, 9:33 pm, Bill Mar <net> wrote: 

Thanks. As soon as I posted the last post I realized that a powered
USB hub had to
exist, so I went out and bought one. Duh. Now everything works.

mandriva 2006 install

Posted: 16 Mar 2008 03:37 PM PDT

Unruh wrote: 
Yes, I know. It is very important to keep things up-to-date. Thanks for
the reminder though.
JM

US Robotics modem on fedora 5

Posted: 16 Mar 2008 01:50 PM PDT

Jean-David Beyer wrote: 
Thanks. I'll look into getting one.
JM

Switching to left-handed mouse

Posted: 15 Mar 2008 06:39 PM PDT

On 2008-03-16, sadf wrote: 

Adjust the numbers as required (3 2 1 is the operative part):

xmodmap -e "pointer = 3 2 1 6 7 4 5"

--
Chris F.A. Johnson, author | <http://cfaj.freeshell.org>
Shell Scripting Recipes: | My code in this post, if any,
A Problem-Solution Approach | is released under the
2005, Apress | GNU General Public Licence

Ubuntu or PCLinuxOS

Posted: 15 Mar 2008 06:27 AM PDT

Maurice Batey <removethis.org.uk> wrote in
news:removethis.org.uk:
 

Thank you all for your suggestions.

I will try PcLinuxOS.

Regards.

Server Setup to boot your PXE client

Posted: 13 Mar 2008 08:45 AM PDT

On Thu, 13 Mar 2008 08:45:57 -0700, Chris wrote:
 

Just minor points:

We've been doing this for a while, and it's helpful to keep the TFTP area
highly organized. So Fedora 8 kernel and initrd might be stored in /var/
tftp/fedora/8/i386 or some such thing. The kernel entries can be
modified to reflect this.

It's also convenient to have a separate configuration file for each
"major image" (ie. Fedora-8-i386-workstation, CentOS-5-x86_64-server,
etc.) in the pxelinux.cfg area, and then create the necessary symbolic
links from the ARP-named file for a given server to the configuration you
want to see booted. This makes completely hands-off installs quite
convenient.

We actually linked the ARP-named file to a file named with each machine's
inventory ID, and then link that file to the necessary startup
configuration. That makes it a little easier as we don't need to know a
machine's ARP address (except for when its first put into our system);
just the inventory ID (which is printed right on the machine).

I didn't see anything about the actual OS install. You'll want the
installation tree to be available (ie. via HTTP or NFS). You can specify
this URL in the Kickstart file. You can specify the location of the
Kickstart file in the kernel line with an option like:

ks=http://pxeboot.internal.yourdomain/fedora-8-i386-server.cfg

That Kickstart file defines the installation. Again, this facilitates a
completely hands-off install.

I'm not sure which distributions do/don't use Kickstart though, but
everything in the "Redhat" world does.

With respect to setting the NIC to support PXE, this is not really
standardized; one just needs to learn how a particular BIOS does it I'm
afraid. Fortunately, it's usually pretty easy to find.

The other item you might want to consider, for servers, is to also set
the serial port as a console and to do the installation headless. As
long as the BIOS supports this (and many do, nowadays), this further adds
convenience as you can watch the installation remotely.

- Andrew

Start and Finish Date Column Format Microsoft Project

Start and Finish Date Column Format Microsoft Project


Start and Finish Date Column Format

Posted: 09 Dec 2005 05:04 AM PST

dwolf,

That worked - Thanks much.

Pete

"dwolf" wrote:
 

Differences when MSProject calculates durations.

Posted: 09 Dec 2005 12:07 AM PST

Thank you Gerard... The dates I posted are examples only. What I mentioned
before happens throughout the calendar. In one project March 7 to March 7 can
be an indicative of 1 day, on another, one day duration means, with
obligation, March 7 to March 8... Or , June 5 to June 10 is six days in one
and five in another. I hope I´m making my self clear. Thanks.

"Gérard Ducouret" wrote:
 

Consolidated Project - Calendar View

Posted: 08 Dec 2005 01:45 PM PST

Haris, thanks but all of the linked schedules are fully expanded in the Gant
View untill I switch to Calendar?

"Haris Rashid" wrote:
 

Project/Resource Manager as Resource?

Posted: 08 Dec 2005 01:34 PM PST

Dale,

Sorry for the misplaced question, I could have sworn I was in the Project
Server area when I posted.

Thanks for the clarification, I'll have to sit with my co-admin and figure
out whether the RBS will be useful at all in our organization.

"Dale Howard [MVP]" wrote:
 

Can I Track Changes in Subprojects/Master?

Posted: 08 Dec 2005 11:56 AM PST

Hi Jack, thaks for the reply, I'll have a look, i failed to mention i have
project 2000, but there is a similiar update.

"JackD" wrote:
 

Change colour of Gantt bars

Posted: 08 Dec 2005 07:04 AM PST

thanks!

"Jan De Messemaeker" wrote:
 

Can Project task ID #'s be displayed on task bars?

Posted: 08 Dec 2005 06:01 AM PST

Hi,

Yes.
Read all about formatting Gantt Bars in
http://www.mvps.org/project/faqs.htm

Faq 31. Customizing Task Bars
HTH
--
Jan De Messemaeker
Microsoft Project Most Valuable Professional
http://users.online.be/prom-ade/
+32-495-300 620
"B. Fleming" <microsoft.com> schreef in bericht
news:com... 


How to select only a few taskcolumns (no gantt chart) for a print

Posted: 08 Dec 2005 04:57 AM PST

Dag Ton,

I'm afraid I'm not very sure what you mean by "select" and "form".
To create a table (a table being the set of columns visible in a view) that
only contains the desired columns, simply select the column, edit, Hide
Column

(To get it back afterwards use Insert, Column)

What is "saved as forms"?
Try Edit, Copy Picture. Is that what you mean?

Hope this helps

(FYI there is also microsoft.public.nl.office.project)

--
Jan De Messemaeker
Microsoft Project Most Valuable Professional
http://users.online.be/prom-ade/
+32-495-300 620
"Ton den Brok" <Ton den microsoft.com> schreef in bericht
news:com... 
selected 
forms. 


how do i set up a task that is never ending and done at 10%?

Posted: 07 Dec 2005 11:50 PM PST

Or you can set up a hammock task that ends when the project ends. You could
assign it to a task calandar that is only 10% of a day (as Jan suggested) or
you can just allocate the task at 10%.

"shahar" wrote:
 

levelling question

Posted: 07 Dec 2005 08:57 PM PST

Greg,

If you don't want that task to be leveled. Set the Priority to 1000. This
will not level this task (or any task where priority is set to 1000).

"greg tatchell" wrote:
 

base calendar

Posted: 07 Dec 2005 08:51 PM PST

gerard, even though i have multiple calendars added to global, i can still
only see the base calendar in the reports/base calendar. none others show up.

"Gérard Ducouret" wrote:
 

Specifying date range and columns when printing a Gantt Chart

Posted: 07 Dec 2005 03:14 PM PST

Thanks!

"John" wrote:
 

Enterprise project and Enterprise resource

Posted: 07 Dec 2005 03:03 PM PST

Dale,
sorry for posting the request here. I will move my question to the MS Server
group. BTW, i did publish the project plan and assignments to Web. And users
have received notification emails about the tasks assigned to them. The funny
thing is when they click to the link in the email, no task is shown up. That
happened to everybody, including myself.

"Dale Howard [MVP]" wrote:
 

Microsoft Project Professional 2003

Posted: 07 Dec 2005 11:57 AM PST



"Rod Gill" wrote:
 

subtasks

Posted: 07 Dec 2005 05:42 AM PST

Thank you, is their no way to diplay the days that i work and not the total
duration.

"Gérard Ducouret" wrote:
 

Mail header - Microsoft Exchange

Mail header - Microsoft Exchange


Mail header

Posted: 10 Mar 2008 01:23 AM PDT

look at the display names in active directory.

--
Diane Poremsky [MVP - Outlook]
Author, Teach Yourself Outlook 2003 in 24 Hours
Need Help with Common Tasks? http://www.outlook-tips.net/beginner/
Outlook 2007: http://www.slipstick.com/outlook/ol2007/

Outlook Tips by email:
outlooktips.net

Outlook Tips: http://www.outlook-tips.net/
Outlook & Exchange Solutions Center: http://www.slipstick.com
Subscribe to Exchange Messaging Outlook newsletter:
EASE.LSOFT.COM


"filip" <fmatosic@@inet.hr> wrote in message
news:phx.gbl... 

No complete IMF install with SP2

Posted: 09 Mar 2008 09:58 AM PDT

I think I got it fixed. I still need to do some testing. I re-ran the SP2
install using /forestprep and /domainprep. The schema extensions are there
now. I see the UCE Archive folder, which I changed via the registry. I'll
watch to make sure spam gets filtered.

Thanks for your help.

Steve Gould

"Bharat Suneja [MVP]" <org> wrote in message
news:%phx.gbl... 


Exchange mbx, hub and cas combinig issue

Posted: 09 Mar 2008 12:06 AM PST

 

I'm sure that I put in Enterprise key, and also when right click on that
server's in Console it stands that it is Enterprise.
When I created 6th database on that server, Information Store service
stopped working and in Application events showed up event saying that
Information store cannot run because there is more that maximum number of
databases.

Btw, OS is windows 2008 Enterprise and Exchange 2007 SP1 enteprise.
Really strange.

any ideas?

A farce - the Microsoft Action Pack Subscription licence agreement

Posted: 07 Mar 2008 08:58 PM PST

So pay and quit whining!
--
Ed Crowley
MVP - Exchange
"Protecting the world from PSTs and brick backups!"

"HotmailUser" <microsoft.com> wrote in message
news:com... 


Exchange unable to relay

Posted: 07 Mar 2008 03:22 PM PST

In the SMTP Virtual Server properties, enable relaying for authenticated
users only. Configure your non-MAPI clients to authenticate using the same
credentials as they do for POP or IMAP.
--
Ed Crowley
MVP - Exchange
"Protecting the world from PSTs and brick backups!"

"James" <microsoft.com> wrote in message
news:com... 


2 mailbox servers need OWA to both

Posted: 07 Mar 2008 02:45 PM PST

If the hostnames and domains are the same and your firewall is open for that
server then redirection should work. A front-end server cannot host
mailboxes.
--
Ed Crowley
MVP - Exchange
"Protecting the world from PSTs and brick backups!"

"tke402" <microsoft.com> wrote in message
news:com... 


Viewing Free Busy with Outlook 2007

Posted: 07 Mar 2008 12:12 PM PST

To have free-busy data for the Exchange 2003 users, I believe you should
have a public store on your Exchange 2007 server and you should create
s on it for the free-busy system public folders. When you're native
Exchange 2007 and Outlook 2007 in your organization, I believe that you will
no longer have to have the public folders.
--
Ed Crowley
MVP - Exchange
"Protecting the world from PSTs and brick backups!"

"osiexchange" <microsoft.com> wrote in message
news:com... 


Exchange 2007 POP3 clients double read receipts

Posted: 07 Mar 2008 04:40 AM PST

I'm not saying you're wrong, but are you sure that the first isn't a
delivery receipt?
--
Ed Crowley
MVP - Exchange
"Protecting the world from PSTs and brick backups!"

"Manuel" <microsoft.com> wrote in message
news:com... 


Address Literals

Posted: 06 Mar 2008 01:53 PM PST

. Unfortunately.
--
Ed Crowley
MVP - Exchange
"Protecting the world from PSTs and brick backups!"

"Mark Arnold [MVP]" <org> wrote in message
news:com... 


Single server to multiple servers

Posted: 02 Mar 2008 09:35 PM PST

OK, good, thanks.

Here goes the $64M question..... if I have more than one HT and more than
one edge, should I have an instance of EdgeSync for each possible pairing, or
one instance for each pair?
I thought I had read on a blog it is better to set up Edgesync between each
pair of HT/Edge.

For example, I have 2 Edge, 2 HT - should I create 2 instances of EdgeSync,
or 4?

"Henry" wrote:
 

Microsoft Word - Toolbars & Menu Has Disappeared on Word 2000

Microsoft Word - Toolbars & Menu Has Disappeared on Word 2000


Toolbars & Menu Has Disappeared on Word 2000

Posted: 14 Dec 2014 02:44 PM PST

I am using Word 2000 Pro on a Vista.  I have used Word 2000 for years and today when I opened Word, the toolbars and Menu did not show.

   Note:  EXCEL and PowerPoint's menu appear correctly.


I have tried the following with no success:

 - Holding down ALT with V did NOT show the View menu (Word was opened w/a new document page).

 - I tried repairing WORD with no success.

 - I uninstalled Office 2000.

 - I used Norton's Utilities to clean the Registry of Office remnants.

 - I reinstalled Office and Word still does not show the toolbars or menu.

Can anyone help with a solution?

Thanks,   Ed

MS Word Dictionary Backup - Unknown File in Backup Folder

Posted: 14 Dec 2014 02:06 PM PST

Unknown File in Word Dict Backup Folder ,  2014 December 14

I am using Windows 7 Pro 64 bit and MS Word 2010 (as part of Office Pro 2010).

Whenever I add words to my MS Word 2010 Custom dictionary or Exclude dictionary, I back up those dictionary files to another folder. I noticed that in my backup folder is also the following file, and I don't know what it is.

CMAdj.9.bin

I can look at the properties, but I still don't understand. It is a BIN file that opens with "Windows Shell Commor" (not "command"), is 1 KB in size, but I don't know what it does. The file modification date is different from the file modification dates of when I first backed up my MS Word dictionaries to the backup folder.

I don't have an "open with" command available when I right-click this file name. So I cannot view it in Notepad. (Btw, is there a simple way to add an "open with" command to always show on the right-click, context/command, menu -- without editing the registry?)

And since I don't know what it commands, I don't want to click on it to run it. I could simply delete it, since it's in my backup folder and therefore cannot be integral to operating any program. If I copied it there, I don't know from where I got it.

Does anyone know or have a guess as to what this file might be or does? Could it have copied along with my MS Word dictionaries when I backed them up?

When you reply, please use simple English because I don't understand a lot of techy words.

Thanks.

Heading Styles

Posted: 14 Dec 2014 12:41 PM PST

In my word document I have heading styles 1 1.1  1.1.1 1.1.1.1 2 2.1 2.1.1 2.1.1.1, etc.  for heading style 5, the style is 1.1.1.11.1. How do I modify Heading Style 5 so it matches / follows the others?

Space removed in Microsoft Office Word Document

Posted: 14 Dec 2014 06:41 AM PST

Dear all,

I have a problem with some of my Word files. Whenever I reopen the file, I always find spaces removed between words as shown in the attached screen shot.

 

Each time it appears in different places.

This is really serious as it is very difficult for long documents to read the whole document in order to scan such errors especially that most of them are not picked up by the auto-correct option.

I do not think it is a corrupted file because it happens in several documents.

Please advise and help solving this problem noting that this is a computer connected to a network and I had the Office 2007 and Word 2010 installed recently and this problem appeared afterwards.

Thanks.

[Original Title: Problem with WinWord]

show subscripts in Word outline view

Posted: 14 Dec 2014 06:33 AM PST

Admittedly this is a pretty obscure question, but how can you show subscripts in Outline view? I choose "Show Text Formatting" and can see, for example, superscripts. But, for some reason, it doesn't show subscripts. Is there any way for subscripts to be shown?

Thanks

Word error

Posted: 14 Dec 2014 06:03 AM PST

I created a word document without any problems and closed the program.

While I was attaching the document in a facebook message i got 2 errors.

One said that i cant close word since there was an open dialogue box.

The other one said that there was a problem saving the document and that it can be caused by low ram,low memory,outdated antivirus or my antivirus is incompatible with word. (As far as I know my antivirus is fine and i have enough memory)

Nevertheless, the file was attached&sent, it was saved just the way i made it and it opens normaly.

How can i fix these problems?

Input mask in Word 2010

Posted: 14 Dec 2014 05:42 AM PST

Does anyone know if it is possible to create input masks in word 2010 using legacy form fields and VBA?

Hello, can microsoft create 256 bit ms office document encrytions? At present, they are only 128 bit.

Posted: 14 Dec 2014 05:06 AM PST

Hello, can microsoft create 256 bit ms office document encrytions? At present, they are only 128 bit.

word could not create the work file. check the temp environment

Posted: 14 Dec 2014 03:36 AM PST

I am getting this error when I attach a word file to my outlook email. I tried the recommended fixes but none of them worked. Last week I removed a program called Citrix because I didn't recognize it and I am wondering if this caused the problem. This problem just started recently. I am using home and student office 2010. I am using internet explorer 11 on windows 7.

Find and replace to remove unwanted Paragraph mark

Posted: 14 Dec 2014 03:20 AM PST

Hi everybody,

I  have a problem paragraph marks of this document

Here is my sample

[Sample]

...

more practice and still more practice, until it is assured that your[WRONG PARAGRAPH]
learning has been driven deep into the lower levels of consciousness[WRONG PARAGRAPH]
and has caused an actual and measurable change in your patterns[WRONG PARAGRAPH]
of thinking and response.[RIGHT PARAGRAPH]
Such learning requires time as well as calculated frequency of[WRONG PARAGRAPH]
repetition. How much time? You can, of course, read through the[WRONG PARAGRAPH]

...

[Sample]

As you see in the sample above, there are several Wrong paragraph that I want to delete

I found out a way to detect wrong paragraph marks: use wildcards with the following key word: ^13<[a-z][A-z0-9]{1,}>

but the thing is: I don't know what to put in the replace box so it will keep the word after paragraph mark

==>Like this: Find [Paragraph][Random word] and Replace with [Random word(original word)]

Thanks for reading :)

Distraction free/Dark mode for Microsoft Word

Posted: 14 Dec 2014 02:38 AM PST

Hi,

as a university professor who spends hours in front of Microsoft Word grading paper, I feel the need for what I would calla "Dark" mode that displays text in white or green or amber on black background. This would greatly improve useability and be quite restful on the eyes. The current modalities with black text on large white areas are very tiring.

This could be introduced as a feature in full screen mode (which, unfortunatley, does not allow editing). One click, and the background goes black while the text is displayed in one of three or four options: white, gray, green, amber.

This would also keep Word abreast of the competition. Software like Scrivener, Dark Room and others already have this option.

Edit: I have found a workaround. From the Page Layout tab you can change Page Color. Since it wold be too much trouble to also change font color, using a darkish gray background also works with black fonts. This is much easier on the eyes. Only one has to remember to change the background back to white before printing.

Word 2013: How do I get hyperlinks to function within Smart Art graphics?

Posted: 14 Dec 2014 01:42 AM PST

Hyperlinks don't seem to work when they're created on text within Smart Art graphics. Also, when I save as a PDF, the hyperlinks function if they're just normal text but create them within Smart Art, and they disappear in the PDF version of the document.

Word 2010 Macro Script not Functioning on Windows 10 Operating System

Posted: 14 Dec 2014 01:15 AM PST

Hello from Steved

In Windows 7 Office Word 2010 this "{1,}" functions as it should

However in Windows 10 Office Word 2010 "{1,}" does not function any ideas please as to why.

"[A-Z]" this part of the macro functions as it should, Windows 10 Office Word 2010.

[A-Z]{1,}

Thank you

Word 2013 in window 7. the message " We're sorry. We can't open the file.docx because we found a problem with the contents.

Posted: 14 Dec 2014 12:05 AM PST

I am editing my student manuscript last night. It was saved properly. This afternoon, I try to open it but failed.  It had happened many time in the last few months.. The n, the message appears " We're sorry. We can't open the file.docx because we found a problem with the contents.  The file is in external drive and I am using track changes in word.  Plls help.

Best regards

Moved from Windows 7 Repair and Recovery Forum.

Help with auto Line

Posted: 13 Dec 2014 05:41 PM PST

For a while I had some default or something that was of great help to me.

It worked like this:

1. I would hit enter to a fresh line,

2. Then type 3 or 4 hyphens

3. Then hit enter again.

Result:

1.  I would instantly get a continuous, unbroken line that went across the page from border to border. 

2.  The cursor would go to a fresh line.

3.  Everything would continue normally.

 Now I can't get it to do this. I assume I changed SOMETHING! I just do not know what or how. I am at *** Email address is removed for privacy ***  Please let me know if you can figure this out! Please. It was very handy for me. No box to click on, no window to open, no nothing! Just the 3 or 4 hyphens, hit enter, and boom! A perfectly straight line was inserted!

Please help!

Font terms of use in Microsoft Word Starter 2010?

Posted: 13 Dec 2014 03:41 PM PST

 Hello. I am looking for fonts and was searching for terms of use on the fonts in microsoft, but was a little confused on finding exact licensing agreements. More specifically, I was interested in using AR BONNIE, but could not find any information on the creator or if I could use it for my logo for a small online art business. Thank you.

~Best regards,

Lisa Corbo

Office 2007 Standard and 2003 Professional - Microsoft Office forums

Office 2007 Standard and 2003 Professional - Microsoft Office forums


Office 2007 Standard and 2003 Professional

Posted: 27 Jan 2008 08:19 AM PST

Not quite. If the OP is not the sole user, then he/she needs two licenses
regardless of OEM or retail.

--

JoAnn Paules
MVP Microsoft [Publisher]

~~~~~
How to ask a question
http://support.microsoft.com/KB/555375


"Arun" <microsoft.com> wrote in message
news:com... 

office 2003 on vista

Posted: 24 Jan 2008 05:10 PM PST

Its not two installations, but available to be installed on two other PC's
ie you can install as often as you like but only on the number of PC's
specified in the EULA

"JuanitaC" <microsoft.com> wrote in message
news:com... 


Office Enterprise 2007+XP SP2+Office Setup launches all the time

Posted: 24 Jan 2008 03:00 AM PST

Hi Kikas,

Dont waste time in uninstalling and re-installing .

Copy and paste each line once in run box and click ok ,
this may resolve the problem in limited windows user account .

reg add HKCU\Software\Microsoft\Office\12.0\Word\Options /v NoReReg /t
REG_DWORD /d 1
reg add HKCU\Software\Microsoft\Office\12.0\Excel\Options /v NoReReg /t
REG_DWORD /d 1
reg add HKCU\Software\Microsoft\Office\12.0\Outlook\Option s /v NoReReg /t
REG_DWORD /d 1
reg add HKCU\Software\Microsoft\Office\12.0\PowerPoint\Opt ions /v NoReReg /t
REG_DWORD /d 1



"kikas" <com> wrote in message
news:com... 

Problems installing Office 2007 Ultimate

Posted: 23 Jan 2008 09:26 PM PST

I may have spoken too soon. Perhaps the list tool cleaned enough of it up
that made the 2007 install believe that it wasn't on the system, even though
many of the files were still there. I was able to successfully install
Office 2007 with Spysweeper and Norton turned off. I think the bottom line
problem was with 2003 being there without the list for uninstalling and also
not turning off spyware and anti-virus programs.

Thanks for your help!!!!
Phil

""Sloan Crayton [MSFT]"" wrote:
 

Adding programs via Office Customization tool

Posted: 23 Jan 2008 12:15 PM PST

On Jan 24, 7:27pm, microsoft.com ("Sloan Crayton
[MSFT]") wrote: 
Hi Sloan,

that's what I need. thank you very much.

Regards,

Jimmy

How to get rid off ctfmon.exe service?

Posted: 23 Jan 2008 11:18 AM PST

Office 2007 no longer installs this component as it is provided by Windows.
Earlier versions of Office did install it as Office installation was
supported on versions of Windows that did not provide that file. Since
Office 2007 requires Windows XP SP2, Windows 2003 SP1 or Windows Vista (all
of these provide ctfmon.exe), it no longer installs that file. Depending
on which features are installed, CTFMON.EXE may be used by Office 2007, but
it does not install the file.

Since it is provided by Windows, I do not believe there is a way to remove
it.

Sloan Crayton
Microsoft

--------------------
| From: "Jack" <replyto@it>
| References: <phx.gbl>
<phx.gbl>
| Subject: Re: How to get rid off ctfmon.exe service?
| Date: Wed, 23 Jan 2008 15:53:52 -0500
| Lines: 30
| X-Priority: 3
| X-MSMail-Priority: Normal
| X-Newsreader: Microsoft Outlook Express 6.00.2900.3138
| X-MimeOLE: Produced By Microsoft MimeOLE V6.00.2900.3198
| X-RFC2646: Format=Flowed; Response
| Message-ID: <u4$phx.gbl>
| Newsgroups: microsoft.public.office.setup
| NNTP-Posting-Host: ip-142.56.99.216.dsl-cust.ca.inter.net 216.99.56.142
| Path: TK2MSFTNGHUB02.phx.gbl!TK2MSFTNGP01.phx.gbl!TK2MSF TNGP03.phx.gbl
| Xref: TK2MSFTNGHUB02.phx.gbl microsoft.public.office.setup:9877
| X-Tomcat-NG: microsoft.public.office.setup
|
| Thank you, but I do not have Office XP
| I use Office 2007
| Why MS insists of using that file, which causes so many problems on user
| computers???
| The most common problem is drastic slow down of any operation performed
in
| Windows (outside the Office).
| In fact Office is not even running! Why that service is on?
| That KB articles do not explain much, and nothing about Office 2007.
| BTW, I have brand new Windows XP and Office 2007 just installed yesterday!
| Jack
|
| "garfield-n-odie [MVP]" <microsoft.com> wrote
in
| message news:phx.gbl...
| > See http://support.microsoft.com/?kbid=282599 "Frequently asked
questions
| > about Ctfmon.exe" and http://support.microsoft.com/?kbid=326526 "How to
| > turn off the speech recognition and handwriting recognition features in
| > Office XP".
| >
| > ctfmon.exe serves the same function in Office 2003. See
| > http://support.microsoft.com/?kbid=823586 "How to turn off the speech
| > recognition and the handwriting recognition features in Office 2003".
| >
| > Jack wrote:
| >
| >> Which part of the office is that file?
| >> It runs as a service and it s up my computer!
| >> Jack
| >
|
|
|

adding 2003 Access Upgrade to 2007

Posted: 23 Jan 2008 10:02 AM PST

Also, if you have a qualifying product, it will not be necessary to install
it first. When prompted, you can insert the CD for the qualifying product,
and point to it in the Setup UI.

Sloan Crayton
Microsoft

--------------------
| From: "DL" <address@invalid>
| References: <com>
| Subject: Re: adding 2003 Access Upgrade to 2007
| Date: Wed, 23 Jan 2008 18:33:21 -0000
| Lines: 16
| X-Priority: 3
| X-MSMail-Priority: Normal
| X-Newsreader: Microsoft Outlook Express 6.00.2900.3138
| X-MimeOLE: Produced By Microsoft MimeOLE V6.00.2900.3198
| X-RFC2646: Format=Flowed; Original
| Message-ID: <#phx.gbl>
| Newsgroups: microsoft.public.office.setup
| NNTP-Posting-Host: cpc2-bexl5-0-0-cust516.bmly.cable.ntl.com 80.1.118.5
| Path: TK2MSFTNGHUB02.phx.gbl!TK2MSFTNGP01.phx.gbl!TK2MSF TNGP05.phx.gbl
| Xref: TK2MSFTNGHUB02.phx.gbl microsoft.public.office.setup:9872
| X-Tomcat-NG: microsoft.public.office.setup
|
| Your post is a bit ambiguous, you can install the access2003 upgrade if
you
| have an earlier qualifying version cd to point to during the installation
| process.
| Though the MS advice is to install the earliest version before installing
a
| later version
| You also dont mention whether access2003 is a stand alone cd or part of
| Office 2003, and whether your 2007 version features Access.
|
| "jird15" <microsoft.com> wrote in message
| news:com...
| >I would like to add my 2003 Access program to my computer but it
requires
| >an
| > older version to run. It there any way I can get it to run with my 2007
| > office version? Thanks Jird15
|
|
|

mixed-up product keys

Posted: 23 Jan 2008 08:32 AM PST

I think you have posted some incorrect information here. MJB does not go
onto the internet to post anything. Been used for many years by very
reliable individuals with many different types of firewalls (mine won't
allow any outgoing communication by any program unless I specifically give
it permission since I have security very tight) and there has never been
anyone other than you say that the program is sending the Product keys to
some internet site.

Now, if you have McAfee, that may be your problem. One of the two
AV/Firewall program suites I immediately uninstall from any computer that I
purchase with it installed. Many known issues with both of the programs
(Symantec's Norton is the other) and I have always had problems with McAfee
products either giving false hits or not finding known problem malware.


"Srikanth" <com> wrote in message
news:com... 


Activation questions

Posted: 23 Jan 2008 05:31 AM PST

Grey Area wrote: 

I had a friend send me Office 2003 Professional by US post and no
problems. He sent it by Global Priority and I had to sign for it. It
cost me 115 euros, including shipping. He also sent me four pairs of
Wranglers jeans via another shipment which cost me 85 euros, including
shipping, and I had to sign for that too and no problems. Next week,
he'll be sending me the new Devil May Cry game and some more jeans :-)

Alias 

Were can I download office xp pro

Posted: 22 Jan 2008 07:08 PM PST

There is no official download
If you know someone with the same version of Office as yours you can used
their cd with your key

"Dave" <microsoft.com> wrote in message
news:com... 


product key has been activated the maximum number

Posted: 22 Jan 2008 05:58 PM PST

Once you have been provided with a new Product Key, you can avoid the need
to reinstall by following the steps in this KB article (if you're
comfortable with some minor editing of the registry) -
http://support.microsoft.com/kb/895456/en-us.

Sloan Crayton
Microsoft

--------------------
| From: "JoAnn Paules" <com>
| References: <com>
| Subject: Re: product key has been activated the maximum number
| Date: Wed, 23 Jan 2008 08:14:20 -0500
| Lines: 23
| X-Priority: 3
| X-MSMail-Priority: Normal
| X-Newsreader: Microsoft Outlook Express 6.00.2900.3138
| X-MimeOLE: Produced By Microsoft MimeOLE V6.00.2900.3198
| X-RFC2646: Format=Flowed; Original
| Message-ID: <phx.gbl>
| Newsgroups: microsoft.public.office.setup
| NNTP-Posting-Host: 149.32.192.1
| Path: TK2MSFTNGHUB02.phx.gbl!TK2MSFTNGP01.phx.gbl!TK2MSF TNGP05.phx.gbl
| Xref: TK2MSFTNGHUB02.phx.gbl microsoft.public.office.setup:9863
| X-Tomcat-NG: microsoft.public.office.setup
|
| You don't have a choice but call the school and talk to the IT staff.
|
| --
| JoAnn Paules
| MVP Microsoft [Publisher]
|
| ~~~~~
| How to ask a question
| http://support.microsoft.com/KB/555375
|
|
| "UAstudent" <microsoft.com> wrote in message
| news:com...
| > im using office home and student 2007 and i got the product key from
| > school
| > and when trying to activate i got the message that the product key has
| > been
| > activated the maximum number of times. how can i try another product
key
| > that
| > was given to me from school withought having to reinstall everything, or
| > calling tech support?
|
|
|

Office programmes inaccessible after XP Home repair

Posted: 22 Jan 2008 05:23 PM PST

Hi DL. Yes, I never managed to repair the old installation. The new parallel
XP Home is running fine, and I intend to remove the corrupted installation
shortly.

I'm just about to try a detect/repair/einstall of Office Pro, and I will
report back after that.

"DL" wrote:
 

Office 2003 Won't Open

Posted: 21 Jan 2008 09:02 AM PST

I am guessing that there is something corrupted in your Office 2003
installation. I would suggest uninstallilng (including deleting the
'\Program Files\Microsoft Office\OFFICE11' folder), and then install again.
When installing, Office Setup will not replace a file that is already
there even if it has been damaged.

Sloan Crayton
Microsoft
--------------------
| Thread-Topic: Office 2003 Won't Open
| thread-index: AchcT1fIHKEci8N1Tn2Siz7TIoklJQ==
| X-WBNR-Posting-Host: 207.46.193.207
| From: =?Utf-8?B?Q0I=?= <microsoft.com>
| Subject: Office 2003 Won't Open
| Date: Mon, 21 Jan 2008 09:02:02 -0800
| Lines: 9
| Message-ID: <com>
| MIME-Version: 1.0
| Content-Type: text/plain;
| cht="Utf-8"
| Content-Transfer-Encoding: 7bit
| X-Newsreader: Microsoft CDO for Windows 2000
| Content-Class: urn:content-classes:message
| Importance: normal
| Priority: normal
| X-MimeOLE: Produced By Microsoft MimeOLE V6.00.3790.2992
| Newsgroups: microsoft.public.office.setup
| Path: TK2MSFTNGHUB02.phx.gbl
| Xref: TK2MSFTNGHUB02.phx.gbl microsoft.public.office.setup:9824
| NNTP-Posting-Host: tk2msftibfm01.phx.gbl 10.40.244.149
| X-Tomcat-NG: microsoft.public.office.setup
|
| I had to run System Recovery on my computer and it completely deleted
Office
| from the hardrive. All my saved work is there but not the programs. I
tried
| to reinstall it but now it won't open. I get a message saying -The
| application failed to initialize properly (0xc0150002). Click on Ok to
| terminate the application.
| I know Office 2003 is older by my computer doesn't have room for 2007,
it's
| too big or something.
| Anyone know how to get this working or what's going on? I have to write
a
| school paper on Word and homework on Excel and now I can't.
|

Office won't work after install

Posted: 19 Jan 2008 10:23 PM PST

Ok, my version is a real version. I have this same copy installed on my
laptop no problem. As for some further experimentation I created a new user
on my computer as an administrator and it works fine. Only it won't work on
my user that i've had since I bought this computer. I'd really like to avoid
having to completely remake a user and deal with custom settings. Obviously,
the problem here is not with word, but somehow with my user accounts and
something there in. Please remember I'm not running Vista, I have XP.

"Carey Frisch [MVP]" wrote:
 

Cannot install Microsoft Office Enterprise 2007

Posted: 16 Jan 2008 02:56 PM PST

Also, which 2007 Office system product do you have? Some are distributed
on DVD disks not CDROM disks. If your drive is not a DVD drive, and the
disk is a DVD, then you won't be able to use it.

Sloan Crayton
Microsoft

--------------------
| From: "DL" <address@invalid>
| References: <com>
| Subject: Re: Cannot install Microsoft Office Enterprise 2007
| Date: Wed, 16 Jan 2008 23:22:54 -0000
| Lines: 10
| X-Priority: 3
| X-MSMail-Priority: Normal
| X-Newsreader: Microsoft Outlook Express 6.00.2900.3138
| X-MimeOLE: Produced By Microsoft MimeOLE V6.00.2900.3198
| X-RFC2646: Format=Flowed; Original
| Message-ID: <phx.gbl>
| Newsgroups: microsoft.public.office.setup
| NNTP-Posting-Host: cpc2-bexl5-0-0-cust516.bmly.cable.ntl.com 80.1.118.5
| Path: TK2MSFTNGHUB02.phx.gbl!TK2MSFTNGP01.phx.gbl!TK2MSF TNGP02.phx.gbl
| Xref: TK2MSFTNGHUB02.phx.gbl microsoft.public.office.setup:9768
| X-Tomcat-NG: microsoft.public.office.setup
|
| Where did you obtain this version from?
|
| "AAAdams" <microsoft.com> wrote in message
| news:com...
| > Please help I am not able to install the program on my computer. My
| > computer
| > is unable to pick it up at all. It doesn't show up under the CD-Rom
| > folder.
|
|
|

I can't get my 60 day trial version of MS office to work- it says

Posted: 15 Jan 2008 05:46 PM PST

The 60 days begins when License Activation for the product has been
completed. You can uninstall it, and download a Trial product from
http://us20.trymicrosoftoffice.com/default.aspx?re_ms=oo&culture=en-US. A
new Product Key will be provided.

Sloan Crayton
Microsoft

--------------------
| Thread-Topic: I can't get my 60 day trial version of MS office to work-
it says
| thread-index: AchX4YvbAk4YnRyaZlOtAqtXoEw==
| X-WBNR-Posting-Host: 207.46.19.197
| From: =?Utf-8?B?V2FycmVuIEU=?= <Warren microsoft.com>
| Subject: I can't get my 60 day trial version of MS office to work- it says
| Date: Tue, 15 Jan 2008 17:46:00 -0800
| Lines: 3
| Message-ID: <com>
| MIME-Version: 1.0
| Content-Type: text/plain;
| cht="Utf-8"
| Content-Transfer-Encoding: 7bit
| X-Newsreader: Microsoft CDO for Windows 2000
| Content-Class: urn:content-classes:message
| Importance: normal
| Priority: normal
| X-MimeOLE: Produced By Microsoft MimeOLE V6.00.3790.2992
| Newsgroups: microsoft.public.office.setup
| Path: TK2MSFTNGHUB02.phx.gbl
| Xref: TK2MSFTNGHUB02.phx.gbl microsoft.public.office.setup:9750
| NNTP-Posting-Host: tk2msftsbfm01.phx.gbl 10.40.244.148
| X-Tomcat-NG: microsoft.public.office.setup
|
| It says the trial is expired- but I've never got it to work. Plus I
haven't
| had the computer sixty days yet. I want to install & try the trial
version
| before I buy it. If it doesn't work now, I doubt it will work after I buy
it.
|