Pages

Search

Prob w/ virtual terminals - Forums Linux

Prob w/ virtual terminals - Forums Linux

Prob w/ virtual terminals

Posted: 29 Feb 2008 10:42 AM PST

Two Ravens wrote:

For those that wish to check on the quality of posts made by Tom Newton
try reading this page, http://tinyurl.com/3y5vhe

--
Two Ravens
"Tom Newton, surely the William Topaz McGonagall of
alt.os.linux.slackware, and now, seemingly, comp.os.linux.setup and
comp.os.linux.misc.as well!"

Rebuilding my server

Posted: 27 Feb 2008 03:06 AM PST

Bill Baka wrote: 
 

I doubt a gamer would want that motherboard, but it is perfectly good for a
server or serious workstation. I bought it off-the-shelf; i.e., it was not a
special order.

http://www.supermicro.com/products/motherboard/Xeon/E7501/X5DP8-G2.cfm

Here are some highlights:

1. Dual Intel® Xeon® Support up to 3.2 GHz
2. Intel® E7501 Chipset
3. Up to 16GB DDR 266/200 SDRAM
4. Intel® 82546EB Dual Port Gigabit Ethernet Controller
5. Adaptec AIC-7902 Dual-Channel Ultra320 SCSI
6. 6x 64-bit PCI-X expansion slots
7. ATI RageXL 8MB PCI Graphic Controller
8. Zero-Channel RAID Support

PCI • Max 2x 64-bit 133MHz PCI-X (3.3V) slots
Default:
• 3x 64-bit 100/66MHz PCI-X (3.3V) slot
• 3x 64-bit 66MHz PCI-X (3.3V) slots
• 1x SXB (Supermicrol Extended Bus) slot
IDE • Dual EIDE channels support up to four UDMA IDE devices
• Supports UDMA Mode 5, PIO Mode 4, and ATA/100
USB Up to 5 USB ports
Serial Ports 2 Fast UART 16550 serial ports
Parallel Port 1 ECP/EEP parallel port
Floppy 1 Floppy controller; 1.44 MB, 2.88 MB, 3-mode support
Keyboard / Mouse PS/2 keyboard and mouse ports

There are multiple PCI busses -- actually PCI-X so they are 64-bit, not just
32-bit.
One has three 66 MHz slots.
One has one 100 MHz slot and the dual SCSI controller
One has one 100 MHz slot and the dual gigabit LAN controller
One has one 100 MHz slot and nothing else.

The speeds of these slots can be adjusted in the BIOS among 33MHz, 66 MHz,
100 MHz, and 133 MHz

--
.~. Jean-David Beyer Registered Linux User 85642.
/V\ PGP-Key: 9A2FC99A Registered Machine 241939.
/( )\ Shrewsbury, New Jersey http://counter.li.org
^^-^^ 08:00:01 up 17 days, 14:11, 1 user, load average: 4.16, 4.20, 4.16

Bulletproofing a Linux server

Posted: 25 Feb 2008 09:13 AM PST

On Fri, 29 Feb 2008 01:27:02 +0100, unknown rearranged some electrons to
say:
 

google "sarcasm"

Is there a good console-based POP3/SMTP compatible mail reader?

Posted: 24 Feb 2008 09:03 AM PST

The Natural Philosopher wrote: 
 

I was apparently unclear. Deleting all your POP3 mail accessible mail from the
server the first time you run any POP3 client It should be a *manually
selected option*, not the default that strips it all and s up all your
mailboxes on other clients the first time you turn on the client and have the
network cable connected.

Been there, done that, have the T-shirt of restoring several Gig of important
corporate person's email in their client folders despite their unwillingness
to switch to IMAP or to allow proper backups of their laptop. I shudder at the
memories.

linux-2.6.24 makes /dev/hda inaccessible

Posted: 24 Feb 2008 08:07 AM PST

HamRadio wrote: 


--
Leon
A computer without Microsoft is like a chocolate cake without mustard.
< running Linux >
You may find that if you change the hda whatever to sda whatever things will
start to work.

KDE 4.1 snapshot screenshots [eye kandy]

Posted: 24 Feb 2008 02:54 AM PST

Tom Newton wrote:
 

a) Please quantify the amount of resources you save.

b) what are the better purposes upon which you expend these 'saved'
resources?

--
Two Ravens
Tom Newton, surely the William Topaz McGonagall of
alt.os.linux.slackware!

Bizarre Problem with GRUB

Posted: 21 Feb 2008 02:35 PM PST

On Wed, 27 Feb 2008 08:38:27 -0800, DDave65 wrote:
 
I haven't used CloneZilla, but another tool to consider using is
ntfsclone. I have used it to backup/restore partitions which are
formatted using NTFS. This does not attempt to get information about the
entire disk- just individual partitions.

Here is a command sequence which saves a partition in "special format"
# ntfsclone -s -o ~/sda1.sf.img /dev/sda1

Or use a compression stage to save space:
# ntfsclone -s -o - /dev/sda1 | gzip >~/sda1.sf.img.gz

Here is a command sequence which restores a "special format" image:

# ntfsclone -r -O /dev/sda1 ~/sda1.sf.img


Similarly, for an image which uses compression:

# cat ~/sda1.sf.img.gz | gzip -cd | ntfsclone -r -O /dev/sda1 -

Then this fixup may be required:

# ntfsresize /dev/sda1

The last command is necessary if the "volume size" of the saved image
is smaller than the target partition. It enlarges to final volume to
match the underlying partition size. 
I wouldn't be surprised if CloneZilla is part of the problem you are
having, but I could be wrong. IMO, working with individual partition
images is the way to go. Once you have restored each partition image
separately, then the last step is to fixup the grub loader. This
approach will automatically fixup various mismatches, which I alluded
to in my initial post. IMO, the hard-disk-upgrade mini howto is a good
starting point to begin learning about disk images.

Just for comparison, here are the steps I would follow to do something
similar..

Sequence:
0. Connect target USB device.
1. Use fdisk to setup the target partition layout. BartPE on partition 1,
I think.

2. Preformat linux partitions with the file system of your choice. IIRC,
avoid using ReiserFS. Primarily, I use XFS. It has some neat resize
features, etc.

3. Restore images.
3.a. For NTFS partitions, use ntfsclone. Example shown above.
3.b. For Linux partitions, use tar (tgz archives). Perhaps, using this
sequence:

cat sda2.tgz | gzip -cd | (cd /mnt/sda2 && tar -xvf - --numeric-owner)

4. Fix grub loader.

# grub --no-floppy
grub> geometry (hd1)
grub> root (hd1,1)
grub> setup (hd1)
grub> quit

Note: use geometry (or some other method) to verify how grub has "counted"
your usb disk. "Hit" the proper target.

5. Shutdown and test reboot with usb.

Disclaimers:
1. I hope I didn't make any blatant mistakes. Check my commands carefully
before using them.
2. There are also many assumptions built in to this explanation. Be sure
of any commands you use are appropriate for your system.
3. Understand what you are doing and the underlying principles (hardware,
software, nomenclature, etc.)
4.Practice using the tools which you have selected until you are
comfortable using them.

--
Douglas Mayne

Start up VMware Workstation automatically?

Posted: 20 Feb 2008 10:22 AM PST

On Thu, 2008-02-21 at 01:28 -0800, Nico Kadel-Garcia wrote: 
.... 

Oh. Well... still, FreeNX is something to look at. I think you
should be able to establish something similar where VMware Server
is started up graphically under a FreeNX session and then attach
to that whenever. Of course kick starting all of this (as you
mentioned) is probably the biggest problem. But I would think
it would be possible (???).

Debian kernel compile question.

Posted: 18 Feb 2008 09:40 AM PST

> 

That did it.

Thanks muchly.

Overt

Fedora Core 6 Memory Stick problem

Posted: 06 Feb 2008 04:04 AM PST


Marc Schwartz <net> writes:
 

Well, I upgraded to f8 as Marc Schwartz suggested and that did fix the
Memory Stick problem; but then with f8 I had several other glitches more
critical than the Memory Stick, so I had to revert back to fc6.

But I recently noticed with fc6 that if I suspend and then resume then both
/dev/sda and /dev/sda1 are automatically created and it recognized the
Memory Stick device on /dev/sda1 and all works fine.

So that is a huge clue: What does the suspend/resume do that the boot does
not do? If I can determine this then I can stick a quick hack into
/etc/rc.d/rc.local (until f9 or so) to mimic at boot time what is done on
suspend/resume. If anyone has any clues for me as what suspend/resume does
in terms of rescanning for such devices it would be greatly appreciated.

Thanks

--
William P. Vrotney - net

 

What does "eday" stand for in MS Project 2003 Microsoft Project

What does "eday" stand for in MS Project 2003 Microsoft Project

What does "eday" stand for in MS Project 2003

Posted: 18 Nov 2005 06:16 PM PST

Note that you can enter your task durations in edays as well. This is useful
when you have tasks which do not obey working hours (things like waiting for
concrete to cure are typical examples)

--
-Jack ... For Microsoft Project information and macro examples visit
http://masamiki.com/project
or http://zo-d.com/blog/index.html
..
"Gilgamesh" <me.not> wrote in message
news:phx.gbl... 
a 

Linking Tasks in Project 98

Posted: 18 Nov 2005 12:31 PM PST

It should with the exception of using a formula to set the flags. You will
have to set them by hand or use some VBA.

--
-Jack ... For Microsoft Project information and macro examples visit
http://masamiki.com/project
or http://zo-d.com/blog/index.html
..
"Brian Connolly" <microsoft.com> wrote in message
news:com... 
http://zo-d.com/blog/archives/ms-project-tips/formatting-task-links-in-ms-project.html 
message 
of. 
visit 
dependency 
a 
link 
links). 
know 
all 

adding formula

Posted: 18 Nov 2005 11:57 AM PST

Hi

Square brackets are only required if there are spaces in the field name but
usually I do use them as standard with or without spaces ....


--
Regards


Chris Marriott - PMP MCSE MCDBA
UK - EPM Consultant & Trainer


"JackD" wrote:
 

Symbol for illustrating indented tasks was a + with a box around i

Posted: 18 Nov 2005 09:55 AM PST

Hi Robert,

We need to discover whether it is Project at fault, or whether it's your PC.
Does it occur with this project on other PCs? If you have no other PC, as
it sounds like corruption within Project, try re-installing Project.

Mike Glen
MS Project MVP

com wrote: 

Tracking Tasks that can be Completed Out of Order

Posted: 18 Nov 2005 08:15 AM PST

You might remove the links and use the task priority setting in conjunction
with resource leveling to set the order they will likely be worked on.
Links should not be used to describe the order you *want* to work on tasks,
they should describe the order you MUST work on the tasks because of
something inherent in the process itself. When building a structure we link
"erect walls" as a predecessor to "install roof" not because we usually do
it that way but rather because the law of gravity says we cannot build the
roof in midair and later stuff the walls in underneath it <grin>. Linking
A->B says that A produces as its output something that is needed as an input
for B and as a result B cannot start until A is done. If that's not true,
remove the link and use something else to model the sequencing.
--
Steve House [MVP]
MS Project Trainer & Consultant
Visit http://www.mvps.org/project/faqs.htm for the FAQs


"tgr" <microsoft.com> wrote in message
news:com... 

I thought the smallest units were Minutes?

Posted: 17 Nov 2005 01:32 PM PST

Duration would be deciminute, work milliminute :)

"Jan De Messemaeker" <jandemes at prom hyphen ade dot be> wrote in message
news:phx.gbl... 

How to make a backup of a master project

Posted: 17 Nov 2005 01:07 PM PST

Hi Tina,

Thanks for your reply. I do not quite understand what you mean when
saying you change the "high level label inside the master project"

Thanks

ODBC in VBA

Posted: 17 Nov 2005 12:59 PM PST

I didn't know there was a microsoft.public.project.developer's group.
I'll look there. Thanks for your help!

Loading a Project from Excel

Posted: 17 Nov 2005 12:37 PM PST

Thanks Jack. I checked the doentation and it seems relatively
straightforward. One question I can't find: Can we load multiple projects in
one pass (one project per line)? or is it just open an excel file that has
one line of data, create the project, close that projects, then open the next
line, create the project, close the project, etc.). With a thousand projects
to create, that would be a time consuming job.

Thanks.

"JackD" wrote:
 

Filtering for only cross-project links

Posted: 17 Nov 2005 12:15 PM PST

Hi Andrew,

Glad to know the formula worked and thanks for the feedback.

Without seeing your project file, it is only a guess, but I assume the
reason why you only need the first part of the formula in a master project
is that if a task is an external successor to one task, it is also an
external predecessor to another task in the project. Tasks actually entered
into the master are internal -- all others (from the subproject files) are
external.

Hope this helps.

Julie

"Andrew K" <microsoft.com> wrote in message
news:com... 

Viewer for documents created in Project

Posted: 17 Nov 2005 08:17 AM PST

Yes, There is some views. Some are free. See our doent :
http://www.ixila.com/Telecharger/Quel%20lecteur%20Microsoft%20Project%20choisir.pdf
Regards,
Xavier
Ixila

Set a start AND end date for a project?

Posted: 16 Nov 2005 08:39 PM PST

A project mathematically simply cannot have a fixed beginning date AND a
fixed ending date. It may, indeed usually DOES, have a date by which it
needs to end but that's not the same thing as the end date. That's the
TARGET for the end date. The project end date itself is that date on which
the last bit of work is done and the project deliverable is completed. That
event may occur before, on, or after the target end date but it occurs
whenever it occurs - Mother Nature and the laws of physics don't care
whether you're on time or late, only the bossand the client cares about that
<grin>. Project's job is to look at the physical work to be done and the
way you deploy your assets to do it and predict when the physical end is
likely to occur so you can create a workable plan that meets the boss's
objectives. When you schedule from the start date forward, you input the
date you will start work and the structure of the work itself, including
your best estimate of the duration of each component task. Project then
computes when the project would end IF you structured the work and assigned
the resources the way you have proposed. If it meets or is better than your
required target, great. If it's not, you don't just designate the date you
want, you must actually revise the organization of the work and/or the
assignment of the resources in order to materially change the computed
schedule so that it finishes where it should.

All of your 1200 tasks should lead up to a finish milestone. Every task in
the project should be linked to a successor except for that one milestone -
if there's no actual activity that is the successor to a given task, the
finish milestone is its successor. You set a deadline on the finish that is
the client's required date. After building your task list, linking them,
and assigning resources to them, you compare the computed scheduled finish
with the deadline for the finish and if necessary iteratively revise the
plan until it's computed to finish on or before the deadline.
--
Steve House [MVP]
MS Project Trainer & Consultant
Visit http://www.mvps.org/project/faqs.htm for the FAQs



<com> wrote in message
news:googlegroups.com... 

To do list Report doesn't show Work per resource

Posted: 16 Nov 2005 05:04 PM PST

In article <com>,
Pete C <microsoft.com> wrote:
 

Pete,
Well the Resource Usage view DOES have a single value of work by task
assignment for each resource. What is a little more difficult to obtain
in that view is the assignment (i.e. task) duration and % complete. That
information CAN be added to the view using spare assignment fields. You
might want to take a look at our MVP website:
http://www.mvps.org/project/faqs.htm
FAQ 37 - Custom fields in tables

John
Project MVP

Outlook is retrieving data from old server message - Microsoft Exchange

Outlook is retrieving data from old server message - Microsoft Exchange

Outlook is retrieving data from old server message

Posted: 17 Jan 2008 09:57 AM PST

All users Exchange properties show the new server. A few things I noticed.
I started the old server back up. Started the Information Store and System
Attendant. They no longer get the message.

Looking at the Public Folders Instances on the old server, I can see 3 of
the Public Folders. What is the difference between the Public Folder
instances and the Public Folder? Looking at the tion status on the old
server, it shows they have been Both Modified. I thought that I had moved
them. Could this have something to do with users having their Outlook start
slow? How do I get rid of the old server?


"RAM" wrote:
 

Enterprise Standard & Enterprise editions together?

Posted: 16 Jan 2008 01:51 PM PST

Thank you very much :)



"Bharat Suneja [MVP]" wrote:
 

Storage Group Size

Posted: 15 Jan 2008 02:00 PM PST

I just created a new storage group with one database that I only moved one
user to so far. Their mailbox size is only 7 MB. It has only been a few
weeks and I was going to start moving other users to it but noticed the
storage group folder has grown to 278 GB. It wasn't being backed up prior to
last night but has now been successfully backed up. The users mailbox seems
to be fine but I'm not able to even browse to that storage group's folder.
It causes explorer to "not respond."

--
T. Richards

Install Exchange 2003 Standard on Server 2003 R2

Posted: 15 Jan 2008 08:26 AM PST

Also this,
Exchange Server 2003 has a known compatibility issue with this version of
Windows. For more information, refer to
http://go.microsoft.com/fwlink/?LinkId=37488.

"Andrew" wrote:
 

Exch2k3 service pack

Posted: 14 Jan 2008 01:24 PM PST

Thanks very much John,

So bl**dy simple isn't it? Silly me.

"John Oliver, Jr. [MVP]" <com> wrote in message
news:phx.gbl... 

Question about performance

Posted: 14 Jan 2008 11:36 AM PST



"Filipe Matias" wrote:
 

I'll have 6 branch offices which represent around 70 users overall. I've
been testing with one branch and it's working like a charm. I need to be
assure that adding 60 more users won't affect the performance.

Thanks for your reply

Questions about migrating from Ex2003 to Ex2007 and coexistance.

Posted: 13 Jan 2008 01:40 PM PST

Now I have a couple of related questions.

I know for Exchange 2007 user mailbox settings you have to use the Exchange
07 tools, you don't use the A/D users and computers snap in, but during the
"coexistence" phase, I assume I still use the A/D snap in for the Exchange
2003 users, correct? If we need to create a new user, or mailbox enable
someone on the Exchange 2003 system, do we just use the regular tools?

Also, regarding OWA. I realize that the Exchange 2007 CAS provides for the
backward compatibility 2003 "/exchange" OWA site, but due to our licensing
issues I don't want to run the 2003 users through the 2007 web system. Is
there any problem with leaving our 2003 Outlook Web server active and as we
migrate users at that time have them go to the 2007 CAS server (and use the
"/OWA")? What would happen if a user with a mailbox on the 2007 server
would try to access the 2003 OWA server?

Mike O.


"John Oliver, Jr. [MVP]" <com> wrote in message
news:%phx.gbl... 

Messages stuck in "Messages Pending Submission" queue

Posted: 12 Jan 2008 11:32 PM PST

Hi,

Yes, we do have Trend Micro Office Scan client and Scan Mail products
running on the server. But I do not think this is causing the problem, as I
have seen this problem being discussed in a lot of forums and people say that
even disabling/removing Trend does not help.

Regards,


"Krep" wrote:
 

Greylisting in Microsoft Exchange Server 2003

Posted: 11 Jan 2008 03:10 PM PST

"spm" <dot.co.dot.uk> wrote in news:xn0fl3l2o1o7m9000
@news.microsoft.com:
 


Thank you very much for the info. I am going to try it.

--
Carlos Jiménez
CCNA, CEH
Microsoft Certified Professional

Smartphone Emulator to test Outlook Mobile Connection

Posted: 11 Jan 2008 12:10 PM PST

holy ****, i had no idea about this emulator. i just migrated from
OWA2003 to 2007 over the weekend, i got a call saying activesync was
broken, my PDA has a broken screen so I couldn't test, but with this
emulator, I got it all working again in 30 minutes. BRILLIANT!!!!

BTW, I did not need to install activesync or outlook to perform an
"over the air" sync.

On Jan 11, 10:49 pm, "Lee Derbyshire [MVP]" <email a@t leederbyshire d.
0.t c.0.m> wrote: 

holy ****, i had no idea about this emulator. i just migrated from
OWA2003 to 2007 over the weekend, i got a call saying activesync was
broken, my PDA has a broken screen so I couldn't test, but with this
emulator, I got it all working again in 30 minutes. BRILLIANT!!!!

Exchange 2007 Tranisition - Public Folder replication issues

Posted: 10 Jan 2008 09:37 PM PST

Hi Neil,

Thanks for your reply.
Can you let me know how this is done - I have spent some time looking at
various settings but cant find where one adds E2K7 server as a to all
public folder instances...?
There are 2 options in EMS for PF instances (on E2k server):
1. To Select PF
2. to 'change server' i.e. move to the public folder on a different server.

I suspect neither of these options is what is required.
Many thanks...

"Neil Hobson [MVP]" wrote:
 

Exchange Distribution List Limitation - Exchange 2007

Posted: 10 Jan 2008 08:57 AM PST

Mmm (deep thought) ... I appreciate the feedback Mark, but can you help me
understand this some more and perhaps suggest an alternative? My users
have a shared mailbox and in that mailbox they have populated Contacts with
many contacts plus they've also created distribution lists within Contacts
(see attached screen-shot). They used the full OL2003 client to create the
contacts not OWA. The problem occurs when they use Contacts to do their
mailings. The exact process as follows:

- Open Contacts from the shared mailbox
- View by Catagory
- Select the Category
- Expand the Category
- Click Action in Menu Bar and select New Message to Contacts which puts
them in the To: field in the new message
- Cut 'n' Paste the Contacts from the To: field into the Bcc: field
- Type the message as usual and click Send

After what seems like an Outlook hang, the result is the error message
described in my oringla posting ... the web article states "Exchange Server
2003 has a limit on the number of contacts that can be added to a
distribution list." which made me think it was an Exchange issue. Either
way, they'd like to
continue using this method, so any information on how to fix or work-around
this problem would be appreciated. Thanks.

PJ.


"Mark Arnold [MVP]" <org> wrote in message
news:com... 

Send-Connector

Posted: 10 Jan 2008 08:26 AM PST

Added HT IP addresss to the smtp gateway to accept mail - worked.



"IT" <com> wrote in message
news:phx.gbl... 

Problem Creating Mailboxes on Exchange 2003

Posted: 09 Jan 2008 11:34 AM PST

Hi David,

i read the article of the URL you sent me. I enabled RUS logging and tired
to check for errors. But i had only informational log events, and no critical
erros on RUS.

I was waitig more than 24 hours for RUS to stamp a user object. But it
didn't happen.
I was also checking if there are some inconsistencies between exchange and
domaincontrollers (eg. time difference to big). But nothing at all was
present.

After i triggered the RUS manually to do an update, then unstamped objects
were
stamped again. I also tested if the RUS stamps new objects wich also works
again.

I'm really a little bit confused why the RUS stops working immediately, but
some collegaues told me, that they had this problem also, and they resolved
it with reboots of DC and Exchange. But in my case this didn't help.

I'll read a little bit more about RUS. Probably i find out why it stops
working.

--
regards from Germany
Schoen, Roland
---------------------------
[Systemadministrator]



"David Ruth" wrote:
 

Restore Exchange 2003 database to different server

Posted: 09 Jan 2008 08:02 AM PST

On Jan 9, 5:46pm, net wrote: 

Let me know if you get stuck; I may be able to help.

DB

Opening Another Person's Calendar in Exchange 2007 OWA

Posted: 08 Jan 2008 10:09 AM PST


"Mark Arnold [MVP]" <org> wrote in message
news:com... 

I tried the drop-down box next to my name in the top right corner. I
selected the name of a person whose calendar I have the rights to view, and
I get a page that reads, "You do not have permission to open this Mailbox.
Contact your Exchange Administrator for access or for further information."
I can open the same person's calendar without problems if I am using Outlook
2003 installed locally.

I don't administer our Exchange server, so I'll have to pass along the
suggestion of publishing the format to our Exchange admins.

Thanks for your help!

--Tom

exchange 2007 - can't delete or move any mails from inbox

Posted: 08 Jan 2008 07:19 AM PST

On Jan 13, 12:26pm, gazza <com> wrote: 

Im having the same problems did you manage to sort it out???

Displaying titles in GAL

Posted: 07 Jan 2008 08:54 AM PST

It doesn't much matter about searches. There will be an AD search
across multiple fields and you can always follow the KB about
ambiguous recipients to widen the scope.

inetinfo.exe use 50% CPU

Posted: 05 Jan 2008 05:09 PM PST

Hello Leif,

on this machine we don´t install a antivirus program (we can on the
smarthost)...

Michael

"Leif Pedersen [ MVP]" wrote:
 

EX2K7 error sending a Mail to a Public Folder (Mail enabled)

Posted: 04 Jan 2008 08:15 AM PST



"Leif Pedersen [ MVP]" wrote:
 

How can I see that ?
Here are 2 entries using Get-PublicFolder

This is a new one, without error

AgeLimit :
EntryId :
000000001A447390AA6611CD9BC800AA002FC45A03006A

C6AB2764C5584FB55128E380D78752000009D2F0150000
HasSubFolders : False
HiddenFromAddressListsEnabled : False
LocalAgeLimit :
MailEnabled : True
MaxItemSize : unlimited
Name : _AAA
ParentPath : \
PerUserReadStateEnabled : True
PostStorageQuota : unlimited
s : {Public Folder Database}
tionSchedule : {}
RetainDeletedItemsFor :
StorageQuota : unlimited
UseDatabaseAgeDefaults : True
UseDatabaseQuotaDefaults : True
UseDatabasetionSchedule : True
UseDatabaseRetentionDefaults : True
Identity : \_AAA
IsValid : True
OriginatingServer : mail01.hbsoft.intra

and here another with the error

AgeLimit :
EntryId :
000000001A447390AA6611CD9BC800AA002FC45A03002E

066F1E7F1F1F4C856B1E7C6493764A0000002D623A0000
HasSubFolders : False
HiddenFromAddressListsEnabled : False
LocalAgeLimit :
MailEnabled : True
MaxItemSize : unlimited
Name : HB privat
ParentPath : \
PerUserReadStateEnabled : True
PostStorageQuota :
s : {Public Folder Database}
tionSchedule : {So.00:00-Sa.23:45, Sa.23:45-So.00:00}
RetainDeletedItemsFor :
StorageQuota :
UseDatabaseAgeDefaults : True
UseDatabaseQuotaDefaults : True
UseDatabasetionSchedule : False
UseDatabaseRetentionDefaults : True
Identity : \HB Privat
IsValid : True
OriginatingServer : mail01.hbsoft.intra

Hans


 

A way to always go to the OWA logon prompt?

Posted: 04 Jan 2008 05:45 AM PST

Thank all of you for your replies - this MS discussion group is a big help
when needed. We are finally able to access her personal mailbox.


"Lee Derbyshire [MVP]" wrote:
 

Exchange 2007 unable to see all DC/GCs in site

Posted: 03 Jan 2008 01:45 PM PST

Thanks for that, fixed it and it was so obvious I am embarrased. The SBS was
the Time Server being the PDC Emulator and the Time Service was not running
so I set the startup to automatic started the service and restarted w32time
on the Exchange 2007 box and now the issue does not exist.

I thought it was something I had missed in Exchange 2007 but like you said
it was AD and DCDIAG showed me this.

Thanks for giving me your suggestions.
--
Johan Strange
_______________________________




"John Oliver, Jr. [MVP]" wrote:
 

Mapi session "/O=bs/OU=hq/cn=Recipients/cn=user" exceeded the maximum of 32 objects of type "session".

Posted: 03 Jan 2008 09:43 AM PST

So I ran this on a client machine - bang, worked great. So I am guessing
that if the exchange server and the client machine uses the chimney command
then that causes the problem


"doh" <news@jacksondaley^removespam^.com> wrote in message
news:com... 

Add External Contact to Global Address List

Posted: 03 Jan 2008 08:56 AM PST

I created the contact in Active Directory Users and Computers. When I look in
the address books, it shows up in All Contacts. I guess I am not
understanding the outlook reference.

"Andy David {MVP}" wrote:
 

Microsoft Word - TABLES DRIVING ME MAD IN DISSERTATION!!!

Microsoft Word - TABLES DRIVING ME MAD IN DISSERTATION!!!

TABLES DRIVING ME MAD IN DISSERTATION!!!

Posted: 29 Nov 2014 01:58 PM PST

I like to think that I am good in Word, and I really understand how to use tables/format them etc.  HOWEVER,  I seem to be completely unable to lock a table in one place and get the text to flow round it.  HELP!  I am in the last week before hand in!!

How do I put everything on one page into one frame?

Posted: 29 Nov 2014 11:39 AM PST

<Moved from Windows 7 / Programs>

I have this form that I've created with both Word 2007 and Excel 2007. I would like to put the whole page into one frame, including an actual frame. Is it possible to do this? What it boils down to is I need to wrap an box around the whole page. I drew the square and tried to put it around my work but it wouldn't go to back. What am I missing? What do I need to do?  Thanks!!

Word 2010 ~ Formatting Zip+4 Code in a MERGE FIELD

Posted: 29 Nov 2014 10:42 AM PST

Hello:

I need help with the following code so the the last 4 #'s of the zip code do not show. Here's the code to use for zip+4 for those who want the zip=4 format. How would I treak this code so that the zip code is 5 digits, i.e. 90079:

{ IF { =ABS ( { MERGEFIELD PostalCode \# "####'-'#####" } ) } <> { MERGEFIELD PostalCode } { MERGEFIELD PostalCode \# "#####'-'####" } { MERGEFIELD PostalCode } } 

Word/excel converter

Posted: 29 Nov 2014 10:09 AM PST

Dear All,

I am using the default Windows converters [wordconv.exe, excelcnv.exe, ppcnv.exe] for converting old doc,xls,ppt format files to docx,xlsx,pptx [Xml formats]. This conversion tools works fine in my windows 7 PC. But when I execute the same command in a windows 2008 Server, the conversion is not happening. I'm not even getting any error messages or error logs. 

This is the command I'm using for doc--> docx conversion:

"C:\Program Files (x86)\Microsoft Office\Office12\wordconv.exe" -oice -nme "input.doc" "output.docx"

This is the command I'm using for xls--> xlsx conversion: 

"C:\Program Files (x86)\Microsoft Office\Office12\wordconv.exe" -oice "input.xls" "output.xlsx"

Both are running on 64bit Operating System only. Someone help. Any suggestion would be helpful. Is there any pre-requisite software needed which will be available in windows 7 by default but not in 2008 servers?

Please do let me know if you need more information.

Thanks,

Paul

Draft View has gone wonky

Posted: 29 Nov 2014 09:53 AM PST

OK... so I am a freelance publishing subeditor and to work on documents I use Office 365 with Dragon Naturally Speaking 12. So far I have found this to be a very good combination.

However... this morning I was dictating text into my computer using Word when Dragon misheard something I was dictating, believing it to be the command "Draft View".

I always work in draft view anyway, so I was already in draft view, so the command should have had no effect. However, what actually happened was that the various text styles used in the documents I edit no longer appear in Draft view. Instead, all of the text is in a font which looks like Courier. Doubleand triple carriage returns have all been replaced with single carriage returns; in short, the formatting on the document is FUBAR.

But when I view the documents in print view, outline view, read mode etc, they look fine. And when I open the documents in my laptop, which runs Word 2007, everything is fine in draft view.

I have 'repaired' Office 365 using the control panel and I have uninstalled the programme and then re-installed it and yet the problem persists.

Can anyone tell me: WTF has caused this and how can I remedy it?

Thanks in advance,

Matt

Afrikaans Proofing Tools for Office 2010

Posted: 29 Nov 2014 09:20 AM PST

Is an Afrikaans proofing tool available for Office 2010 (Version 14.0.4760.1000 (32 bit). No service packs are installed

PLEASE NOTE: I do not want to change the interface language; it must stay English. I only need an Afrikaans spell checker.

It seems that most links on sites dealing with this query lead to Office 2013 sites.

Problems when trying to open a Word document

Posted: 29 Nov 2014 04:59 AM PST

Hello,

Has anyone out there encountered the following problem: I cannot open an existing Word document by simply double-clicking on the icon of the document on e.g. the desktop or in the Explorer tree structure. Instead I have to first open the program Word and then open the document from the menu bar on top within Word.

Hoping for help

Dennis_14

List format question

Posted: 29 Nov 2014 12:38 AM PST

Here is my question:

In one of cases I need to type, the draft looks like:

1.    Answer the following questions and

       you need to ...

       (a)   What is the name of ...

       (b)   What is the value of ...

2.    (a)   Compare X and Y ...

       (b)   State your ...

I have no problem for the first part for 1, and 1-(a), 1-(b) etc. But I cannot make the second part since I cannot find a way to have 2 and 2-(a) appear on the same line. Is there is a quick solution. 

Thank you!

Jun 

Mail merge Word Excel, Could not find installable ISAM

Posted: 28 Nov 2014 10:28 PM PST

Hi there,

I am trying to do a Mail Merge using a Word document and an Excel database. When I try to open the Excel file I get the error message 'Could not find installable ISAM'.

There ar some threads about this error message. Some about a connection string, some about file locations. Since I don't use a connection string, that seems not to be the answer but I do have some worries about the file locations or the registry entry.

On my system the Msexcl40.dll is located in C:\Windows\SysWOW64 and in C:\Windows\WinSxS\x86_microsoft-windows-m..components-jetexcel_31bf3856ad364e35_6.3.9600.16384_none_b2ae6f155dd6aa86.

The register key to JET is HKEY_LOCAL_MACHINE\SOFTWARE\Wow6432Node\Microsoft\Jet\4.0\Engines\Excel

So everything seems to be there, but it does not work.

Using Word/Excel from Office 2013 Professional Plus 2013 32-bit

Running Windows 8.1 Enterprise 64-bit.

Any ideas??

VBA to detect rotation of inline shape

Posted: 28 Nov 2014 06:09 PM PST

It's only been recently (since 2007?) that Word has allowed us rotate inline shapes. I'm looking for a way for a macro to detect whether such a shape has been rotated; but apparently there's no .Rotation property for the InlineShape object. Any ideas for a way around that (in Word 2010)?

If it helps, the rotation is always either 0 or 90 degrees, so a Boolean function would suffice (that is, there's no need to detect the amount). Unfortunately the shapes are not all of the same aspect ratio or this would obviously be simple.

Thanks for any clues.

Mark

How to find a file you saved over.

Posted: 28 Nov 2014 04:33 PM PST

I finished typing a document in Microsoft word 2013. I then decided to transfer it to my usb drive. I thought that I was moving the new version (from my computer)) to save over the the old version (on the flash drive) but I did the opposite. So then I had an old file (from my usb) on my computer. I tried to reverse it by right clicking the undo copy button, but it just deleted the file. Now I cant find the file that I accidentally saved over either. I have windows 8 by the way. 

Replace Pirated Office with Valid office - Microsoft Office forums

Replace Pirated Office with Valid office - Microsoft Office forums

Replace Pirated Office with Valid office

Posted: 31 Dec 2007 10:17 AM PST

I have to be honest with you, up until I got my new computer this year I was
using Outlook Express so I never had to worry about backing up files. I
don't do a lot of customizing so I was content to install and run with
Office out of the box. I'm sure others can help you with what you'd need to
back up to maintain your email stuff. :-)

--

JoAnn Paules
MVP Microsoft [Publisher]

~~~~~
How to ask a question
http://support.microsoft.com/KB/555375


"Satch" <microsoft.com> wrote in message
news:com... 

XP-Professional Office install over Vista Office trial version

Posted: 30 Dec 2007 04:09 PM PST

I'd wait. It's one thing if you *need* Office 2007 for some reason but if
you don't, hang in there for a while. You need to be a bit conservative with
software upgrades sometimes. My employer isn't going to upgrade but but I've
volunteered to be a guinea pig if they want to roll it out slowly. They said
it could be a while so I'll continue "practicing" at home so that I can be
ready to hit the ground running when they finally decide to make the change.

--

JoAnn Paules
MVP Microsoft [Publisher]

~~~~~
How to ask a question
http://support.microsoft.com/KB/555375


"Joseph Meehan" <com> wrote in message
news:phx.gbl... 

Office Home and Student 2007 Installation Problem

Posted: 30 Dec 2007 12:33 AM PST

Call Microsoft , they may charge you $10 for a new PK if you have a disc.

"Park" <microsoft.com> wrote in message
news:com... 

Copying to Multiple Computers

Posted: 28 Dec 2007 12:41 PM PST

Dar <microsoft.com> wrote:
 

You're welcome, thanks for letting us know the outcome.

--
XS11E, Killing all posts from Google Groups
The Usenet Improvement Project:
http://improve-usenet.org

Loading Office 2003 and 2000

Posted: 28 Dec 2007 06:43 AM PST

At this date, I suspect not. Any trial version would be 2007.

--
Milly Staples [MVP - Outlook]

Post all replies to the group to keep the discussion intact. All
unsolicited mail sent to my personal account will be deleted without
reading.

After furious head scratching, DL asked:

| I hope not a trial version? :(
|
| "Lori''s Little Secret" <microsoft.com>
| wrote in message
| news:com...
|| Thanks y'all. Turns out upon further inspection that my new
|| computer came loaded with Office 2003 professional. I don't need to
|| load anything off of
|| any disks! Whoo hoo!
||
|| "JoAnn Paules" wrote:
||
||| Hey! I was right. ;-)
|||
||| --
|||
||| JoAnn Paules
||| MVP Microsoft [Publisher]
|||
||| ~~~~~
||| How to ask a question
||| http://support.microsoft.com/KB/555375
|||
|||
||| "DL" <address@invalid> wrote in message
||| news:phx.gbl...
|||| Select Custom Install, select Access to run from PC, nothing else,
|||| select/create a specific folder eg \Program Files\Microsoft
|||| Office\Office2k\
|||| Once installed, visit Office update & update
|||| Then install Office 2003 - by default 2003 installs to a version
|||| specific
|||| folder
||||
|||| "JoAnn Paules" <com> wrote in message
|||| news:phx.gbl...
||||| First - Install Access 2000 first. Do a custom install. (I think
||||| that's
||||| what it's called - just read the options before clicking merrily
||||| away.)
|||||
||||| Second - Install Office 2003 next.
|||||
||||| --
||||| JoAnn Paules
||||| MVP Microsoft [Publisher]
|||||
||||| ~~~~~
||||| How to ask a question
||||| http://support.microsoft.com/KB/555375
|||||
|||||
||||| "Lori's Little Secret" <Lori's Little
||||| microsoft.com>
||||| wrote in message
||||| news:com...
|||||| Here's my deal. I have an office 2003 disk and want to load all
|||||| the components on to my computer, but I need Access to run my
|||||| business but
|||||| only
|||||| have an office 2000 disk for that. I don't want any of the other
|||||| office
|||||| 2000
|||||| components on my computer. I know that in the advanced options
|||||| of the
|||||| 2000
|||||| disk there is a way to tell it to not load it, or that it is
|||||| unavailable
|||||| or
|||||| something to that effect. So I guess my question is, what is the
|||||| best
|||||| way to
|||||| do this so my computer doesn't crash?

Office Professional 2007 registration failure

Posted: 27 Dec 2007 10:18 PM PST

Actually, the way they are using the software - three people, they would be
violating the EULA if it was installed on the second machine as the second
install is "to be used by the primary person on both devices" (my quotes.)
They would need to purchase 2 more licenses to be "legal."

From MS EULA for Office 2007 Pro -

2.INSTALLATION AND USE RIGHTS. Before you use the software under a license,
you must assign that license to one device. That device is the "licensed
device." A hardware partition or blade is considered to be a separate
device.

a.Licensed Device. You may install and use one copy of the software on the
licensed device.
b.Portable Device. You may install another copy on a portable device for use
by the single primary user of the licensed device.


"garfield-n-odie [MVP]" <microsoft.com> wrote in
message news:phx.gbl... 

Office Enterprise 2007 setup problem

Posted: 27 Dec 2007 11:25 AM PST

From where did you procure this Office 2007 Enterprise Edition. When disk is in the drive and you right click on it what do you see and what file extensions are shown

--
Peter

Please Reply to Newsgroup for the benefit of others
Requests for assistance by email can not and will not be acknowledged.

"Amber" <microsoft.com> wrote in message news:com... 

Removing Microsfot Office XP Professional w/ FrontPage

Posted: 27 Dec 2007 08:41 AM PST

Deborah M. <microsoft.com> wrote:
 

You can do a manual uninstall. You delete all Office files manually
and remove all registry entries.

If you don't feel competent to do this, don't try it!

One other suggestion would be to find a copy of Office XP Pro w/ Front
Page and install it and then uninstall it, that should work.


--
XS11E, Killing all posts from Google Groups
The Usenet Improvement Project:
http://improve-usenet.org

From Word2007, no print to OneNote2007

Posted: 27 Dec 2007 07:01 AM PST

Hi David,

You may want to also post in the MS Office OneNote discussion group using the link below.

===========
<<"David F" <com> wrote in message news:com...
I've been doing some reading and apparently this feature does not yet work
in Vista 64 bit which is what I am using....when is MS going to support its
own products?
Can someone from MS please provide the proper printer driver for "Send to
OneNote 2007"? TIA >>
--
Please let us know if this has helped,

Bob Buckland ?:-)
MS Office System Products MVP
 

LINKS
A. Specific newsgroup/discussion group mentioned in this message:
news://msnews.microsoft.com/microsoft.public.onenote
or via browser:
http://microsoft.com/communities/newsgroups/en-us/?dg=microsoft.public.onenote

B. MS Office Community discussion/newsgroups via Web Browser
http://microsoft.com/office/community/en-us/default.mspx
or
Microsoft hosted newsgroups via Outlook Express/newsreader
news://msnews.microsoft.com

Can't get rid of a program

Posted: 25 Dec 2007 10:43 PM PST

You have a digital locker if you have ever d/l'd anything from Microsoft's
website(s). You can go there and re-d/l whatever software you purchased or
d/l'd from MS. After you SAVE a copy of the software, you can create an image
file of the install package and burn it, effectively giving you a CD to use
for a repair or whatever else you may need to do.
--
If U always do what you always did...
you';; always get what you always got!


"PA Bear" wrote:
 

Office 2007 SP1 not recognized by Windows Update

Posted: 25 Dec 2007 06:10 AM PST

Hi Bob,

Nice to hear that the update works fine now. :)

If you have any other questions or concerns, please do not hesitate to contact me. It is always my pleasure to be of assistance.

Have a nice day!

Emily Lin,
Microsoft Online Partner Support

Get Secure! - www.microsoft.com/security
================================================== ====
When responding to posts, please "Reply to Group" via your newsreader so that others may learn and benefit from this issue.
================================================== ====
This posting is provided "AS IS" with no warranties, and confers no rights.


-------------------- 
Subscribe to: Posts (Atom)