Pages

Search

Office 2007 Laptop and desktop - Microsoft Office forums

Office 2007 Laptop and desktop - Microsoft Office forums

Office 2007 Laptop and desktop

Posted: 21 Mar 2007 11:44 PM PDT

It is possible to buy an OEM version that is not installed on a computer. I
know this because I used to sell computers for a major manufacturer.

--
JoAnn Paules
MVP Microsoft [Publisher]

~~~~~
How to ask a question
http://support.microsoft.com/KB/555375


"Peter Foldes" <com> wrote in message
news:phx.gbl...
Jo Ann

The OP wrote the following
 

--
Peter

Please Reply to Newsgroup for the benefit of others
Requests for assistance by email can not and will not be acknowledged.

"JoAnn Paules" <com> wrote in message
news:phx.gbl... 

Borders in Red

Posted: 21 Mar 2007 05:41 PM PDT

Hi Jim,

Is this a 'print' page on a single worksheet or are you referring to separate worksheets (tabs) as being pages in this case?

Was this workbook created new in Excel 2007 or a document created in an earlier version of Excel

[You may want to use the link below to also post this to the MS Office Excel discussion group.

==============
<<"Jim S" <net> wrote in message news:phx.gbl...
No, office 2007 is quite different and when I go to format, cells, it
displays borders in red also even though the setting is automatic and it
wont change to black.

Jim >>
--
Please let us know if this has helped,

Bob Buckland ?:-)
MS Office System Products MVP
 

LINKS
A. Specific newsgroup/discussion group mentioned in this message:
news://msnews.microsoft.com/microsoft.public.excel
or via browser:
http://microsoft.com/communities/newsgroups/en-us/?dg=microsoft.public.excel

B. MS Office Community discussion/newsgroups via Web Browser
http://microsoft.com/office/community/en-us/default.mspx
or
Microsoft hosted newsgroups via Outlook Express/newsreader
news://msnews.microsoft.com

I'm told I can't Upgrade?

Posted: 21 Mar 2007 09:50 AM PDT

Hi Dale,

What version of Windows, what steps are you following and what is the exact error message you're receiving on screen and in the
Setuplog you'll find if you use
Start=>Run
%temp%

Can you run a repair/reinstall of Office 2000 successfully from Add/Remove Programs in the Windows control panel? (you'll need the
Office 2000 CDs for that).

============
<<"Dale" <microsoft.com> wrote in message news:com...
I purchased Office Professional 2007 and in trying to load, it can't read my
installed version of Office 2000 nor the original disk in DVD Drive? Any
suggestions would be helpful!
--
dale >>
--

Bob Buckland ?:-)
MS Office System Products MVP

*Courtesy is not expensive and can pay big dividends*

Office 2007 Professional Plus Deployemtn testing problems

Posted: 21 Mar 2007 05:47 AM PDT

Hello Garth

Thanks for the response.

Hmmm, Thats very strange as I originally tried to use the admin switch and
it didn't like it ("Files necessary to run the Office Customization Tool were
not found. Run Setup from the installation point of a qualifying product.")
Looking at my Prof Plus install (on the network and on the original CD image)
and neither seem to have the Admin folder which holds the OCT Tools.
It seems that the image of Prof Plus on Technet Downloads doesn't have all
the necessary file to do full deployment testing, which is, frankly, a bit
pants.

I'm also having problems with the config.xml file. If I put in anything with
a OptionsStateID of "Default" or "Local" it doesn't like it (with or without
the children="force" option) and halts with an error (looking at the logs
generated it seems that Default or Local are "invalid data".

Seems that Setup on the Technet images might be a bit buggy fullstop!

As for the OCT being buggy..It looks like I still have all THAT fun to come!
:o)

Best Regards

R.


"Garth" wrote:
 

Error when installing from a IMG file

Posted: 21 Mar 2007 03:10 AM PDT

Hi

I'm using Nero 7 Premium Nero Burning ROM. I just open the file in Nero and
burn it. The problem has appears with other version of Office some mounth
ago. I'm greatful for any tips to solve this

Fredrik

"Bob Buckland ?:-)" wrote:
 

I'm new and lost!

Posted: 20 Mar 2007 05:16 PM PDT

So you purchased a new laptop and you dont know what you purchased?

"Billie" <com> wrote in message
news:com... 
with 
presentation 
try 

Installing Office via GPO

Posted: 20 Mar 2007 04:25 AM PDT

here is a log launching the file

MSI (s) (00:54) [13:14:26:634]: MainEngineThread is returning 1603
MSI (s) (00:B0) [13:14:26:634]: Destroying RemoteAPI object.
MSI (s) (00:C4) [13:14:26:634]: Custom Action Manager thread ending.
MSI (s) (00:B0) [13:14:26:634]: RESTART MANAGER: Session closed.
MSI (s) (00:B0) [13:14:26:634]: Calling SRSetRestorePoint API.
dwRestorePtType: 13, dwEventType: 103, llSequenceNumber: 19, szDescription:
"".
MSI (s) (00:B0) [13:14:26:644]: The call to SRSetRestorePoint API succeeded.
Returned status: 0.
MSI (c) (C4:6C) [13:14:26:644]: Back from server. Return value: 1603
MSI (c) (C4:6C) [13:14:26:644]: Decrementing counter to disable shutdown. If
counter >= 0, shutdown will be denied. Counter after decrement: -1
Action ended 13.14.26: INSTALL. Return value 3.


"Peter Foldes" wrote:
 

How many times can I install office 2007 ultimate (retail)

Posted: 19 Mar 2007 06:02 PM PDT

Milly has answered your question properly but since you paid
so much for your software, why don't you pay a little more
and purchase a hard drive cloning program like Ghost or True
Image? This will save you at least 4 hours of reinstall
every time you need to change something and go back to your
original XP base and Office base setup.

Once you have everything installed properly clone the hard
drive to another then when you want to rebuild the system,
simply reclone the drive from your backup.

Makes changing almost painless.

<com> wrote in message
news:googlegroups.com... 

Invalid product ID while instaling Office Home and student 2007

Posted: 18 Mar 2007 04:59 PM PDT

You will need the key that is located on the CD case or folder that the Home
& Student cd came in.

Generally this is a bright orange sticker (haven't seen the 2007 version of
the sticker yet) on either the bottom of the CD case or on the folder that
the software came in that says not to lose this number.


"Nagesh Ganji" <Nagesh microsoft.com> wrote in message
news:com... 

Error 1311 missing source file

Posted: 18 Mar 2007 02:45 PM PDT

Have you completely uninstalled and then reinstalled?

--

JoAnn Paules
Microsoft MVP - Publisher

How to ask a question
http://support.microsoft.com/kb/555375



"MeetingMountainMan" <microsoft.com> wrote in
message news:com... 

Office 2007 B2TR "will not go away"

Posted: 18 Mar 2007 01:31 AM PDT

Why are you calling her a bigot? That's completely out of line! If you don't
agree with her comment, fine. But to turn around call her an ugly name shows
ignorance on your part.

--
JoAnn Paules
MVP Microsoft [Publisher]

~~~~~
How to ask a question
http://support.microsoft.com/KB/555375


"roy-w" <microsoft.com> wrote in message
news:com... 

Office 2007 color schemes

Posted: 16 Mar 2007 07:26 AM PDT

Hi JoAnn,

Sorry for any inconvenience this by design issue has caused. I have already
passed the concerns to our related team and they are working on it.

Adam, have you any additional questions regarding this issue? If you do,
please do not hesitate to let me know.


Regards,

Leon Hao

Microsoft Online Partner Support
Get Secure! - www.microsoft.com/security
================================================== ==
When responding to posts, please "Reply to Group" via your newsreader so
that others may learn and benefit from your issue.
================================================== ==
This posting is provided "AS IS" with no warranties, and confers no rights.

Microsoft CRM - outlook contacts and mail merge subject

Microsoft CRM - outlook contacts and mail merge subject

outlook contacts and mail merge subject

Posted: 25 Mar 2005 12:18 AM PST

If you are searching for a Add-On which allows you to
make mailmerges and write a letteractivity with
your own defined subjects you can look at
www.mscrm-addons.com and download the
WordMailMerge Add-On.


--
--
Christian

com
www.mscrm-addons.com
Your company for MS-CRM ADD-ONS!
GroupCalendar for MSCRM
Related Documents for MSCRM
WordMailMerge for MSCRM
"mv" <com> schrieb im Newsbeitrag
news:phx.gbl... 

SQL replication after movin MS CRM 1.2 to another new server

Posted: 24 Mar 2005 06:11 AM PST

I believe those guys (local MBS specialist) would show up in this discussion
board with the same questions :)

Thanks for sharing your experience about this matter.

Nerijus


"Dodd" wrote:
 

Installing CRM 1.2 with Office 2003 and BCM

Posted: 24 Mar 2005 02:49 AM PST

The server service was on, and the MS BCM MSDE was completely uninstalled.

I know have it working:

On the advice of another tech, I did the following:
Deleted all the \Program Files\MS SQL Server files
Deleted that users profile.
Removed that user from the local group
Removed the laptop from the domain.
Joined the laptop back to the domain.
Downloaded and installed the MSDE2000A from the SQL Download page.
Added the user to the local group.
Logged on as the user.
Configured Outlook.
Installed CRM.

Installed correctly.

Not exactly which step fixed it but I did not have time to try one at a
time.

"Boolean1" <net> wrote in message
news:com... 

Reinstall of CRM error

Posted: 23 Mar 2005 03:31 PM PST

Michael,

I had to uninstall CRM twice before too. I had to clean up everything
(include deleting the database) and start all over again. Once everything is
clean up, it's easier to reinstall and it runs smoother.

If you already click using the existing database and it'll still trying to
install a new database, then it sounds like it's a bug...

-Katrina

"Michael" wrote:
 

Problem with installing Office information bridge Framework for M

Posted: 23 Mar 2005 02:59 PM PST

Hello Richard,
In the Microsoft Office Information Bridge Framework for Microsoft CRM
Version 1.2 Readme, In the known issues section
Server Error Messages
Message: Error 28000
Solution: The installation was not completed successfully. Verify the
following:
1) You are logged on as the local administrator on the server.
2) The application crmtermgenerator was run.
3) Permissions were set through Microsoft management control.
4) Verify that rights for NETWORK SERVICE were set.
Regards,


Saed Assaf
Microsoft Corporation


"Richard" wrote:
 

bulk update of pick-list fields

Posted: 23 Mar 2005 02:33 PM PST

IHey:

A better (and supported) way to do this would be workflow. If you're an
admin and you can connect remotely to your production server, simply go into
the Workflow manager, set up the following workflow rule:

1.) Type in the Server Name (probably "crm..." something something)
2.) Choose the object you wish to update (Accounts, Contacts...) from the
"object" drop down. Leave ther "View" as "Rule". since this type of Workflow
is so simple, Creating a Rule Template reall won't save any time.
3.) Select "File" --> "New"
4.) Name your rule something like "Bulk Update for (fieldname)".
5.) Write a Description if you wanna.
6.) from the "Select the event" drop-down, choose "Manual" (meaning the User
doing the updating will trigger the event)
7.) Click the "Next" Button
8.) in the "Select Behavior" dialog, go to the "Common Tasks" frame and
click the "Insert Actions" item. A pop-up menu will be displayed. Select
"Update Object"
9.) The Update Object dialog lets you select any data field on the object
and it's Parent entities (sorta like the merg fields in e-mail templates. ie,
if you want to create workflow for an Opportunity, your update options will
also include the associated Account or Contact entities). Choose the field
you wish to update.
10.) Select "=" in the next drop-down
11.) Select the Value of your picklist from the third drop-down (this is the
value to which your picklist will be updated)
12.) Click "OK"
13.) Save the Workflow Rule.
14.) Your rule will now appear in the Workflow list. Highlight it and right
click on it. Select "Activate" which makes it available in CRM.

Finally, go to the view that exposes the records you wish to update (You can
even use "Advanced Find" to filter on these records. Select the records you
wish to update (you can only select records on the current page). From the
"Actions" menu (upper lefthand corner of the grid view) select "Apply Rule".
Your workflow rule will be there. Click "OK" and your records will be updated
accordingly.

If you set up an Advanced Find to look at your Picklist Field in question,
set the Condition to "Does Not Equal" the Updated Value. This way, if you
have mutiple pages of records that need updating, every page you update will
bring the remaining records to the first page. No need to flip through 10, 20
pages of records...

Let me know how it goes...

--Dodd


"Matt Parks" wrote:
 

Email ID

Posted: 23 Mar 2005 11:39 AM PST

You the man, Brett.

Thanks!
"Brett meyer" <microsoft.com> wrote in message news:com...
Here are the steps published from MBS on how to turn it off:

Important This article contains information about modifying the registry.
Before you modify the registry, make sure to back up the registry and make
sure that you understand how to restore the registry if a problem occurs. For
additional information about how to back up, restore, and edit the registry,
click the following link to view the article in the Microsoft Knowledge Base:

http://support.microsoft.com/default.aspx?scid=kb;EN-US;256986

To check the registry value on the Exchange Server:

1. Click Start, click Run.

2. Type regedt32 in the Open: box.

3. Navigate to HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\MSCRM.

4. You should find a registry key with a ValueName: MessageTagBehavior

5. If this key does not exist, create the key using the following values:

Value Type: DWORD key value
Value Name: MessageTagBehavior
Value data: 0

6. If the Value data is set to Null or 1, the tracking number will be
attached to the subject line of the e-mail messages. If the Value data is 0,
the tracking number is not attached to outgoing e-mails.

7. Stop and restart the Microsoft CRM Exchange Queue Service for the new
setting to take effect.

If the e-mail tracking is turned off (value data is set to 0), the Microsoft
CRM system will no longer generate the unique tracking number. In addition,
this results in the loss of the Microsoft CRM system's ability to
automatically track incoming e-mail.

Brett Meyer
CRM Team Leader/Microsoft Certified Instructor

"JGary Penner" wrote:
 

Mail Merging to more than 100 Contact/Leads

Posted: 23 Mar 2005 11:21 AM PST

You can make MailMerges for more then 100 if you
use the WordMailMerge Add-On.
This is only one of the features you have with WordMailMerge Add-On
some others are:
-) User custom fields for a mailmerge
-) search for contacts with account criterias
-) make mailmerges with opportunity-data
-) ...

You can download a trial - version at www.mscrm-addons.com


--
--
Christian

com
www.mscrm-addons.com
Your company for MS-CRM ADD-ONS!
GroupCalendar for MSCRM
Related Documents for MSCRM
WordMailMerge for MSCRM
"Brett meyer" <microsoft.com> schrieb im Newsbeitrag
news:com... 

page errors when using crm

Posted: 23 Mar 2005 11:19 AM PST

Do the macines have XP SP2 installed? If so, you need to install the hotfix for
SP2 on the CRM server.

Matt Parks
MVP - Microsoft CRM

----------------------------------------
----------------------------------------
On Wed, 23 Mar 2005 11:19:02 -0800, "Novapol"
<microsoft.com> wrote:

hi!

everytime i use crm in some computers i can't navigate, i open it, go to
sales, and when i try to get back to the principal page, the explorer says
the web page has errors:
Line:69
Car:4
Error:access denied
code: 0
url: http://server01/bar_bottom.aspx?startPage=home

any ideas? thanks

CRM + aspnet worker process = slow down after 1 or 2 days?

Posted: 23 Mar 2005 09:35 AM PST


ignore that last post (by me) , found the answer

"Matt Parks" <com> wrote in message
news:com... 

Customizing exampleview

Posted: 23 Mar 2005 07:41 AM PST

Make sure you not only change the label but also the field name if you want
to display the label name in views. You will have to publish after making
those changes. Changing the field name, changes the column name on views.

Brett Meyer
CRM Team Leader/Microsoft Certified Instructor

"Mattijs" wrote:
 

Removal of unused left panel menu items

Posted: 23 Mar 2005 07:15 AM PST

Scott:

Dave's right, but the best way to do it is to remove the User's (or the
User's Team) "Read", "Create" and "Delete" priviledge in their User Role.
I've done this with several CRM entities for all types of users, but it's
important not to take away "Append" and "Append To" priviledges since users
may run into various errors when assigning records associated to these
entities...

"Dave Carr" wrote:
 

error when send e-mail

Posted: 23 Mar 2005 06:47 AM PST

Check the Virtual Directory that was created on the Exchange box. It should be
set to allow anonymous access.

Matt Parks
MVP - Microsoft CRM

----------------------------------------
----------------------------------------
On Fri, 25 Mar 2005 00:31:03 -0800, Fanda Koudel
<microsoft.com> wrote:

Hello Matt, I look at my crm server at saw this message:

MSCRM Platform Error Report:
--------------------------------------------------------------------------------------------------------
Error: <description>An unexpected error occurred.</description><details>An
error occurred attempting to dispatch the email : HTTP status: 401 Access
Denied.</details><file>D:\crm\Build\3297\src\platform\inclu de\proxy\proxyutil.h</file><line>47</line>

Error Message: An unexpected error occurred.

Error Details: An error occurred attempting to dispatch the email : HTTP
status: 401 Access Denied.

Source File: D:\crm\Build\3297\src\platform\include\proxy\proxy util.h

Line Number: 47

Stack Trace Info: at System.Web.UI.Page.HandleError(Exception e)
at System.Web.UI.Page.ProcessRequestMain()
at System.Web.UI.Page.ProcessRequest()
at System.Web.UI.Page.ProcessRequest(HttpContext context)
at
System.Web.CallHandlerExecutionStep.System.Web.Htt pApplication+IExecutionStep.Execute()
at System.Web.HttpApplication.ExecuteStep(IExecutionS tep step, Boolean&
completedSynchronously)


Matt Parks píše:
 

How to setup Email notifications ....

Posted: 21 Mar 2005 02:07 PM PST

You need the semicolon at the end. Try
&incident.incidentid;

Matt Wittemann
http://icu-mscrm.blogspot.com

"Dav" wrote:
 

Microsoft Word - Office 2010 Component failure

Microsoft Word - Office 2010 Component failure

Office 2010 Component failure

Posted: 11 Aug 2014 12:45 PM PDT

Office 2010 components have started to fail on opening.  Started around 3 weeks ago.  It was after a number of updates were uploaded and installed.  Any ideas on source of problem.

Word 2013 - Start-up page changes

Posted: 11 Aug 2014 12:22 PM PDT

I don't understand what I'm doing differently now from this morning.

This morning when I opened Word, the first screen I saw was the one showing the templates.

When I restarted Word this afternoon, it did not start with the templates screen, but in a blank document, in the HOME tab (like it did in 2010 version). It only returns to the template screen by clicking File/New.

What am I doing differently? I don't really care which screen it opens up to but I would like to know what to expect because I am writing instructions that teach less experienced people to do certain things in Word.

Continue Automatic numbering in INCLUDETEXT docs

Posted: 11 Aug 2014 11:51 AM PDT

I have a conditional IF field in a word doc: {IF LOC = 1 "{includetext "c:\\docs\\subparagraphs.docx}"}

subparagraphs.docx has autonumbered paragraphs that should continue numbering from the previous paragraphs in the primary document. How can I get them to continue numbering?

Thanks.

Numbered list interspersed with other text in MS Word 2013

Posted: 11 Aug 2014 11:13 AM PDT

I am writing a textbook using MS Word 2013 and I want each chapter to have problems throughout.  I want the problems to be numbered consecutively within each chapter, with the chapter number, a dash, and the problem number.  So the book should look like this:

----------------------

Chapter 1:

INSTRUCTIONAL TEXT . . . .TEXT. . . . TEXT

Problem 1-1:  (text of problem)

Problem 1-2:  (text of problem)

Problem 1-3:  (text of problem)

MORE INSTRUCTIONAL TEXT . . . . MORE TEXT. . . . TEXT

Problem 1-4:  (text of problem)

Problem 1-5:  (text of problem)

YET MORE INSTRUCTIONAL TEXT . . . . MORE TEXT. . . . TEXT

Problem 1-6: (text of problem)

----------------------

And so on.  I will probably be adding, deleting, and moving problems in the course of writing the book and I would like the problem numbers to adjust themselves automatically.  Is there a way to do this?

Thanks for any help.

Office 2007 - Word 2013

Posted: 11 Aug 2014 11:05 AM PDT

I would like to print a list of files in a folder.  Does anyone know how to do that?  I used to have something called File Pro but I can't find it.  Lois  Power

Envelope printing problem in Word 2013

Posted: 11 Aug 2014 11:02 AM PDT

Just installed Office 2013 update at business network.  I am now unable to print envelopes from a new document.  They print fine from a document before the new software download.  I have tried changing all envelope settings, fonts, etc.  I have tried printing to a full size paper to see if it was printing in an obscure location on the envelope, but there is nothing printed at all.  Any ideas?

Locked out of Word

Posted: 11 Aug 2014 10:24 AM PDT

how to up date my micro soft word resume is locked ? it says my account is out of date.

***Moved to *Office Topic: Microsoft Office Word* from *Microsoft Office Access* the database software and adjusted the *Title*

Unable to open Word

Posted: 11 Aug 2014 10:17 AM PDT

I am still within my trail period of Office365 and when I attempt to open Word I receive this error message, "Sorry, we ran into a problem while trying to install the product key.  If this keeps happening, you should try repairing your office product. (System error: 0xc004e01c)".  Whenever I attempt to repair it does not work...when I go to help it does not fix the issue.

I have restarted the system and still continue to receive the same error. 

How can I test a product to consider purchasing when I can not test the product?

Please fix this error!!!

Is there a common keyboard shortcut available to close toolbox windows in Word 2013?

Posted: 11 Aug 2014 10:09 AM PDT

I'd like to close toolbox windows in Word 2013 using a keyboard shortcut. Is there a common shortcut available in Office 2013 to close toolbox windows?

Your helpful response is appreciated.

Office Word

Posted: 11 Aug 2014 10:09 AM PDT

My Office Word won't open.

It says go to control panel. programmes and features - repair office.

where is the control panel?

how can I fix this?

I bought office this year so suppose it is 2013 office.

think it is 8.1. don't think i have the office key with me. can you help on this urgently?

Rgds,

Julian Hale

Office 365 and Printing Booklets on Android

Posted: 11 Aug 2014 10:03 AM PDT

Does Office 365 (either Home, Personal, University), offer 'Book fold' in the Page Setup dialog (Margins) on Android on a Galaxy Tab S 10.5, so that a 4pp and 8pp leaflet can be printed?

Thank you for any help.

Don

Word 2010 Legacy Field Problem

Posted: 11 Aug 2014 10:02 AM PDT

Here's a recent issue that I've never seen until about three weeks ago. What's more, it happens on my work computer (running Windows 7 and Office Professional 2010) and my home computer (Windows 8.1 and Office Professional 2010).

I have some forms I've created for work, in which I've inserted legacy form fields in the past with no issues.

Now, with no difference in computer or Word versions, when I edit the document and insert new fields, the new fields contain what looks like an ASCII character (from the old DOS days) that won't go away. It's on the screen and it prints on the document!

You can see in the screen shot below I've added fields for the employee name and start date. These have the character. Other fields in the document do not.

I've tried inserting them fresh from scratch, and I've tried copying and pasting an existing field instead. Same result either way. What you see in this shot is a copy/paste version, copies from the first field under the "date completed" column.

When the fields are deleted, the character goes away. When I re-insert, they come back.

Any ideas????

microsoft word

Posted: 11 Aug 2014 10:01 AM PDT

I am unable to open Microsoft word. it say We'er sorry, but Word has run into an error that preventing it from working correctly. but it will not repair it. I can open everything else such as PowerPoint fine

Problem with MS Office word 2013 (Equations)

Posted: 11 Aug 2014 09:24 AM PDT

Hello!

I created 300 Equations using word 2010. However, when I open the document in word 2013, the signs -, +, =, and * are missing in the Equations, But when I print the document the equations are printed correctly. This is really giving me a headache because my Adviser is not able to read these equations in his word 2013 version. Please help.

Multiple Text Fields in Form

Posted: 11 Aug 2014 08:48 AM PDT

I'm attempting to create a form. I have multiple fields for this form on one line. This is the case for the majority of the lines and fields on the form. We need to keep this doc to 1 page and there's a ton of info to squeeze onto it. I say this to avoid being told to give each field its own line.

I need to keep the second field on each line from moving when text is getting entered into the first field on the same line. See below for an example for you to see and hopefully help make it clear what I'm looking for.

In the example when I start typing in a company name the Date of RFP field goes backwards and does not stay where it was originally setup. In essence I'm trying to anchor these fields to their original position regardless of the length of the text entered. I know I've done this before, but I can't get it. The user also needs to be able tab through to each new field.

If a macro is needed or VBA please be clear in directions, I'm very much the novice in those areas so something I can follow and then copy and paste would be great.

Thanks!
Rob

Company Name:                                                                     __________________________________              Date of RFQ:        _________________________ 

Address:                     ________________________________________________________________                Date to Estimating:     _____________________

   ________________________________________________________________                Date to Purchasing:     _____________________ 

City, State, Zip:          ________________________________________________________________                Due Date to Customer:  _  _________________  

Unable to change line spacing in Word 2013

Posted: 11 Aug 2014 08:15 AM PDT

The answers to problems with line spacing in Word 2010 did not solve the problem.  I have tried the paragraph spacing, setting the default, etc, but it doesn't work. 

Table Formula Not Updating In Restricted Document

Posted: 11 Aug 2014 07:46 AM PDT

I have a Word document that has several form fields many of which are restricted.  I added a small table to list projected payment amounts from various loans.  The table also has form fields.  However the bottom line of the table, which has a formula to add the monthly payments into one large payment, will not update unless I unlock the document.  Is there a way to have the formula update without unlocking the document every time?

Thank you.

 

Can I change footers to reflect chapter titles?

Posted: 11 Aug 2014 07:27 AM PDT

Hi,

I am creating a document that has multiple chapters in it and I want the footer to reflect this. I have searched online and found a couple of solutions, most seem revolved around page breaks, inserting fields or macros. But none of them have worked for me so far.

This is what I want;

With the chapter title changing for each chapter - some chapters are only a page others are 10 pages or longer.

How do I achieve this? I have tried and tried but so every time I think it will work and I start to type the chapter name every footer changes.

Thanks

Save as pdf breaks endnote links

Posted: 11 Aug 2014 07:22 AM PDT

Hi,

When I save my .doc or .docx as pdf, the endnote links doesn't work in the pdf document. 

I've seen a lot of people having problem with TOC or other cross references. All of these seems to work fine for me. The only thing not working is the endnotes.

Any suggestions on how to solve this?

Best regards

David

includepicture field problem

Posted: 11 Aug 2014 06:07 AM PDT

Hi

I´m using the includetext field and includepicture field in my documents so that I can be sure that I´m using the latest data. It's a lot of files and in the end of the process we put them all together to one document. And that is when I get problems, when I copy a includetext fieldd from one document to another it all works great. But when I copy the includepicture field the field disapears and only the picture is there, the field with the link disapears. Is this a bug?

/Lina

O365 Word Error

Posted: 11 Aug 2014 04:56 AM PDT

Hi All,

I start getting VBE7INTL.DLL error on 3 of my user machine (all using windows 7). When they try to open word the are getting following error.

The Language DLL 'VBE7INTL.DLL' could not be found.

Till yesterday all the machines was working fine.

Regards,

Fawad.

Office 13. VBE7INTL.DLL missing

Posted: 11 Aug 2014 03:21 AM PDT

After running fine for some time, I got the Message: normal.dotm not found when I start Word: After fixing this I still get VBE7INTL.DLL missing.

System is: Windows 8.1 and Office 13 home and student. it is preinstalled from Dell and I have no CD's.

Organogram Word 2013

Posted: 11 Aug 2014 12:23 AM PDT

Hi

I'm struggling with an organogram in Word 2013.  I've used this function in previous versions and not sure what I'm doing wrong in 2013.

I've created the basic structure with SmartArt and need to do some manual changes (extending lines etc.).  Usually I would turn off the Auto Layout function, but now there is no option to use it.  I found the function on the toolbar, but it is greyed out and can't be used.

Also, if I select the line I want to increase in height, the Smart Tools/ Format/ Size buttons are also grey-out.

Please please please help!!

Office Products Freezing Upon Opening

Posted: 10 Aug 2014 11:59 PM PDT

Hi,

For the last two weeks or so I have had users using both Office 2007 and Office 2010 reporting their products (Outlook, Excel and Word) freezing upon opening. After a few tests, I found that deleting their user profiles and re-loading them, then editing their profile in the registry (renaming the .bak file) - seemed to fix the issue. Now the problem is happening again. Is there a connection between creating their new profile then editing the registry and the Office programs freezing or was this just a fluke?? It is also peculiar that not everyone on the network is experiencing this issue. I need to have a permanent solution for this issue as I cannot keep deleting profiles and reloading every time this happens. Anyone's assistance with this would be greatly appreciated.

Thanks in advance.

Retaining reverse autonumbering in pdfs

Posted: 10 Aug 2014 10:35 PM PDT

I created a macro to autonumber different lists in reverse. I then copied and pasted these lists into a single document. When I attempt to export or print as a pdf, the first numbered list retains the correct numbering from n to 1 but all subsequent numbers are negative both in the Word 2013 file and pdfs. I can recover the correct numbering in Word 2013 with undo but cannot get the right format in my pdfs. Any suggestions?

MS Word Templating

Posted: 10 Aug 2014 09:03 PM PDT

Hi MS Community,

I would like to know if it's possible to create a template in MS Word from something designed in Illustrator or Photoshop and how to go about doing it if possible. In my case I am designing diagrams and wish to make it a template like that of graphs.

Thanks in advance.

Microsoft 2013 stopped working message after installing 8.1

Posted: 10 Aug 2014 06:57 PM PDT

Microsoft Word has stopped working - A problem caused the program to stop working correctly. Windows will close the program and notify you if a solution is available.

This is the message I receive every time I try to access Word. I have reinstalled Office 2013 5 times. I have run the Fix it application. I have tried most of the fixes on the site and cannot get this to work. Any suggestions? I use this for work and it is impairing my ability to do my job.

Thank you!

Can I install Office Home and Business on my two laptops? (same user)

Posted: 10 Aug 2014 06:09 PM PDT

I have two laptops and no desktop.  Can I install my one license for Office Home and Business 2010 on both laptops?

Brackets showing up in header and footer for MS word2003

Posted: 10 Aug 2014 05:49 PM PDT

Just today, I seem to have accidentally toggled some feature in my settings that has caused these gray, L-shaped brackets to show up in my header and footer. Here's a screen shot. I've got word 2003, and my operating system is 64 bit windows 7. These don't print up, but I find them rather distracting, and would like to know how to turn them off.

Thanks

H

Microsoft Word - Proofing tools problems

Microsoft Word - Proofing tools problems

Proofing tools problems

Posted: 10 Aug 2014 01:16 PM PDT

I've got a problem with my spell check and proofing tools on Office 365's latest build (1004). My version is installed in Dutch on my computer but I regularly use English UK spell check as I live and work in the UK. That had been working fine until I tried to spell check something today: I got an error message saying that this language (English UK) was not installed.

I thought this was very odd as it patently had been installed but to be sure, I clicked on the link provided and installed the English proofing tools again. But the error message still comes up, and in the Options > Language screen it says that English proofing tools are not installed. 

How can I fix this?

Kerning in WordArt?

Posted: 10 Aug 2014 11:29 AM PDT

I'm trying to create an alphanumeric logo in Word and want to use an outlined font.  Simply entering the text is fine, I can change the spacing between characters to get the effect I want, but Word's default font outline is too lightweight.  I can also enter the text in the chosen font in WordArt, using the outlined font utility, and can then go in and change the weight of the outline.  But I can't hand-kern the letters in WordArt, and whatever kerning utility is automatic in WordArt (if indeed there is one) does a pretty lame job.  Is there a workaround for this beside using WordArt to create each letter individually and then lining up the frames by eyeball?  Also, does the same apparent shortcoming apply in MS Publisher as well?  Thanks.

I can't get rid of these random boxes

Posted: 10 Aug 2014 11:05 AM PDT

There are random boxes at the top and bottom of the document that I can't get rid of, nor click. They appeared after I used the Microsoft Fix It program for Word 2007. Does anyone know how to fix this?

Error

Posted: 10 Aug 2014 07:39 AM PDT

When I open my microsoft word it displays "there is insufficient memory or disk space. Word cannot display the requested font". All the fonts on my graphs have disappeared in word and excel on the other hand seem to be in a total mess. Could use some advice. Thanks.... I am running microsoft 365

When trying to use Chapter heading for inserting table caption, while in Chapter 1, it gives me a caption of 0.1 instead of 1.1.

Posted: 10 Aug 2014 06:41 AM PDT

I setup the multi level captioning style to have Heading 1, and I used that to setup Chapter 1 headings. Then in the first table that I have, when going to Insert Caption, I used "use numbering|, and although in the pop up dialog box it shows 1.1, when I close it, the caption in the Table label shows 0.1 instead of 1.1.

Figure caption and Table caption get mixed up

Posted: 10 Aug 2014 06:15 AM PDT

I have some figures and tables which I want to insert captions. So, I start with the fist table, and inset Table 1 of type Table. Then I go to the first Figure and insert Figure 1 of Figure type. I use Alt F9 and see that it's correct. Then I go to the 3rd figure, and I try to put Figure 2, but it puts Figure 3 automatically. And, Table 1 is now changed to Figure 1!!!

Help.

Office 365 Word Text Box

Posted: 10 Aug 2014 04:59 AM PDT

Hi,

I've only been using this version of word for a day or 2 so still finding my way around. I've inserted a text box over a picture and want the box itself to be 'clear' so just the text is visible over the picture. Is this possible?

thank you,

Kate

Turning off footnotes and endnotes in wordcount by default

Posted: 10 Aug 2014 04:41 AM PDT

I have Office 365. I have looked around and a lot of answers seem to be that footnotes and endnotes are not included in the word count by default, but in my Word they are. It's really annoying. Is there a way to turn this off so it doesn't include footnotes and endnotes unless I tell it to? I use Word on Windows 7 and Windows 8.1.

I'd like a refund for my Microsoft Windows 2013 as it doesnt work!

Posted: 10 Aug 2014 03:48 AM PDT

I purchased this product in February and in July it stopped working.  I cannot access my documents without an orange window appearing.  this is extremely frustrating and I do not know what to do to get my money back because there is no Microsoft helpline.  The one online just connects to some other company.  I feel that as I cant use the package I purchased that I am entitled to a refund.  I tried doing a system restore but it didn't work and I have to read my documents in Open office in order to access them.  Most unsatisfactory service from Microsoft and it needs sorting!

MS Word 2010 importing a font

Posted: 10 Aug 2014 12:45 AM PDT

I wish to locate a downloaded font - Cloister Black - into MS word 2010 to be available in the fonts list displayed and to be included in themes.

Can you tell me where to find the appropriate fonts folder to import it to?

Many thanks

Keiths112

Word 2002 Crashes with Google Input Marathi

Posted: 09 Aug 2014 10:27 PM PDT

Hi,

Word suddenly stops working when I type 'Marathi' with 'Google Input' tool.  I can type 1-2 words, then it crashes.

Here are the problem details.

Problem signature:
  Problem Event Name: APPCRASH
  Application Name: WINWORD.EXE
  Application Version: 10.0.2627.0
  Application Timestamp: 3a9cdbe7
  Fault Module Name: WINWORD.EXE
  Fault Module Version: 10.0.2627.0
  Fault Module Timestamp: 3a9cdbe7
  Exception Code: c0000005
  Exception Offset: 00446a6a
  OS Version: 6.0.6002.2.2.0.768.3
  Locale ID: 1033

Additional information about the problem:
  LCID: 1033

Read our privacy statement:
  http://go.microsoft.com/fwlink/?linkid=50163&clcid=0x0409

Can someone help me on this.

Creating sheets in Microsoft Word

Posted: 09 Aug 2014 09:52 PM PDT

Hi there

Is there any option to create multiple word sheets in Word similar to how you can have multiple excel spreadsheets in Excel?

Cheers

Emily

"Problems with the contents" error opening Word 2007, line 2 column some crazy number

Posted: 09 Aug 2014 06:57 PM PDT

I do not have the savvy to do this manually on my own. This is a policy I worked very hard on and was told when I emailed the document to my boss that he couldnt open it-no problem I will re attached and send again. But first let me make sure there isn't a problem, and of course there is;it wont open due to a problem with the contents...

I did not modify the original file as I was afraid of messing it up since I was going to attempt to  fix myself with the making it into a zip file and going over the document.XML file opened on wordpad. OMG, what a mess of words. I have verified in that state that all of the contents are indeed there, but all the extra gobble gook is attached. That is as far as I can get-can someone please help me????

https://www.dropbox.com/s/168gc8dumvcoqhs/Food%20Allergy%20Policy%20Draft.docx

Macro to number not working

Posted: 09 Aug 2014 06:34 PM PDT

this macro is supposed to change every @ into a number but it's not doing it.  I can't figure out what's wrong.

 Selection.Find.ClearFormatting
    Selection.Find.Replacement.ClearFormatting
    Selection.Find.Replacement.Style = ActiveDocument.Styles("List Number")
    With Selection.Find
        .Text = "@"
        .Replacement.Text = ""
        .Forward = True
        .Wrap = wdFindContinue
        .Format = True
        .MatchCase = False
        .MatchWholeWord = False
        .MatchWildcards = True
        .MatchSoundsLike = False
        .MatchAllWordForms = False
    End With

Fixing the "problem sending command to the program" problem

Posted: 09 Aug 2014 04:21 PM PDT

When I try to open a DOTX file by double-clicking on it in Windows Explorer I get this dialog:

Looking at back-postings on this problem I find Doug recommending:

"Go to http://support.microsoft.com/kb/921541 and follow the instructions under "Delete the Word Data registry key". "

When I do that I get to:

Do I delete the folder "Data" and all its contents?

Forgive me being a bit wary but I do not like mucking around with things I do not understand, and I do not understand Regedit.

Lots of questions. Thanks for your patience.

Posted: 09 Aug 2014 03:42 PM PDT

a. Is there a way to prevent automatic unwanted format changes to  complex tables? Every time I open the document, a few tables are changed. They are too complex to be assigned one style. Is it possible that if a table has no Style, Word feels free to change its format?

b. Why does displaying the XE fields completely change the page numbering and page layout? Can this be prevented? If not, it was a horrible design decision. They should have handled it like the Review notices off to the right.

c. Why doesn't Advanced Find have a backwards search or a count of instances found?

d. I think I've noticed that Find does not work 100% of the time. True?

e. The lines of text differ in length between Draft and Print views. This is very inconvenient because Print view shows the final layout but repaginating is very slow.

f. Why does repaginating have to happen all the time in Print view even when I make a change that can't affect it? Very annoying.

g. My book has three levels of organization: Parts, Chapters, and Sections. When I go to update the page numbers for cross references or TOCs, doing it at the Part level does not work. It keeps asking whether I want to update everything or just the page numbers. Doing a Chapter or Section is OK.

h. I thought that the entries in a TOC were hyperlinked, so that if you click on one it goes there. Mine don't do that.

i. At seemingly random times, when I click Home > Paragraph > Numbering, Word hangs up for as much as ten minutes! Any ideas?

j. Why are the Quick Styles not in a sensible order?

k. Is there a way to find out what styles are actually used in my document? It would be nice to delete all those that are not used, in one quick step.

l. Is there an easy way to remove lots of the styles I never use? Deleting one at a time  is  very  slow.

m. Are any of these things improved in Office 2013? If not, why buy it?

Steve

Dialog Box colours in Microsoft Office 2013 programs

Posted: 09 Aug 2014 03:13 PM PDT

Hi

We are using the Dark Grey and Clouds theme in Word 2013.  A colleague who works for us from Canada has changed to these options but the outside of his dialog boxes are blue, ie the title bar and surrounding border.  Could you please let us know how he can change his to the same as ours, ie white interior and grey border and title bar.

Many thanks.

Cheryl
Subscribe to: Posts (Atom)