Pages

Search

Microsoft Word - Office Problem

Microsoft Word - Office Problem

Office Problem

Posted: 12 Jun 2014 05:17 PM PDT

something went wrong with my office, the program cannot start. How can I repaire the problem?

MS Word - How do I highlight trailing spaces

Posted: 12 Jun 2014 04:18 PM PDT

Recently, I've had to start using Word and there's something I need to do, but can't figure out how.  I need to highlight a phrase and any trailing space(s).  The problem is, Word will not highlight the trailing spaces(s).

I've tried highlighting.
I've tried shading.
I've tried changing the trailing space to an Em Dash
I've tried changing the trailing space to an En Dash
I've tried changing the trailing space to a nonbreaking space

Let me give a better example (ignore the quote marks, only used for reference)

"ABCD  WXYZ    "

I want to highlight the spaces after the Z, but I can't get Word to do it.

I had someone suggest putting a character at the end of the spaces and then changing the font color of that character to white, but for technical reasons, I can't use that suggestion.  Anyone know how to do this?

Directory issue

Posted: 12 Jun 2014 04:10 PM PDT

Changed the name of a folder, now cannot open previous files....... says directory error.

Probably a simple fix, how?

Win 8.1

thanks

Can't Access Onedrive Documents from Word 13 - Security Error

Posted: 12 Jun 2014 02:52 PM PDT

I am trying to load a document from OneDrive in MS Word 13.

The document is owned by a different MS account to the one I use to log into Windows 8 with.

When I try to open the document I get a popup box that asks for my credentials. I enter my OneDrive logins, and the box reapears asking the same question.


How can I open my OneDrive documents? I've already successfully signed into my OneDrive account in Word, I don't understand why I should need to do this again.

Create a Table of Contents with paginations on both header and footer

Posted: 12 Jun 2014 02:13 PM PDT

I have a dissertation paper (60+ pages) with Heading 1, Heading 2 and Heading 3 styles for Chapters, sub chapters,etc. 

I have paginated the document in the following form:

Header has title of dissertation paper and to the right side page number which begins at number 2 on Chapter 1 (but actual page is 6 since I have abstract and other material prior to that and of course the blank page I have left for the TOC)

Footer has page number (roman) on left side. 

I need my TOC to read the headings and also the roman numbers up to and not including Chapter 1 page (which is where header pages begin) and then continue to read the headings but labeling by using the headers page. Also, because I have a lot of subheadings that may or may not be on the same page as Heading one, the TOC is giving me the following table and I do not want this:

Heading 1---------------------- 1

   Heading 2 -------------------1

      Heading 3------------------1

What could I do for my TOC to look like the following, including abstract (roman numbers that will be found on footer):

Abstract----------------------v

Heading 1--------------------1

  Heading 2

      Heading 3

Heading 1a-------------------5

  Heading 2a

     Heading 3a

All the headings are set, the table of contents is not giving me what I need and I'm not sure if there's any way out of manually deleting the extra stuff and changing stuff around.

Thank you

Can't type in blank document with Word 2013

Posted: 12 Jun 2014 01:35 PM PDT

In Word 2013, when I open a blank document, it won't let me type in it!  I start banging on my keyboard and randomly click around and eventually I can type.   The last time I decided to save the blank document, then I was able to type.  I've never had this issue in 2010 or 2003.  What is the problem? 

Quickstart with Word'13

Posted: 12 Jun 2014 01:08 PM PDT

I just installed Word Home 2013, the standalone version, on my Win 8.1 ASUS notebook. I used to have a trial of Office 365. But now my quickstart icon in my start menu for Word is gone. I cant find anything relating to Word anywhere. Help?

Word is changing my hyperlink.

Posted: 12 Jun 2014 12:52 PM PDT

My organization recently changed our homepage from

www.oldaddress.com

to

www.newaddress.com.

I am doing a Word merge.  In the template document I put to

www.newaddress.com.  When I run the merge, the result document has www.oldaddress.com.  It is changing it!!

What causes this?  What can anyone tell me?  Thx.

Lower case vs upper case

Posted: 12 Jun 2014 11:50 AM PDT

I reinstalled Office 2007 and in my Word docs I now find that the first-person pronoun 'I' keeps showing up in lower case, though it does show up as a capital letter at the beginning of a sentence. 

Where are my docx files?

Posted: 12 Jun 2014 09:34 AM PDT

I am running an up-to-date version of Windows 7 pro.

Same comment on MS Office.

I have a script that cleans up my desktop.  Its run fine for a long time. Now it doesn't.

The only noted change, other than the automated updates, is that I recently installed the latest MS Office.

As snip of the script is:

c:
cd \Users\Mike\Desktop
move *.zip C:\users\Mike\Documents\zip
move *.doc* C:\Users\Mike\Documents\doc
move *.xls* C:\Users\Mike\Documents\xls

It does not find the *.xls* or *.doc* files on the desktop.

A Dir of the desktop directory

C:\Users\Mike\Desktop>dir *.doc*
 Volume in drive C is Windows7_OS
 Volume Serial Number is 34AE-8535

 Directory of C:\Users\Mike\Desktop

File Not Found

Yet they show on the desktop.

And a snip of the Properties on the desktop shows I have the path correct.

Is a puzzlement.

They show on the desktop, the "Properties" say they are, but a command line doesn't show them.

Any suggestions?

Why my MS Word97 documents open in Word 2010?

Posted: 12 Jun 2014 08:53 AM PDT

I have MS Word97 and Word 2010 installed on my computer running Win7 Pro (32 bit). They coexisted peacefully until the last week update of Word 2010 through Windows Update.

Now, when I click on any Word 97 document located on Desktop or in the My Documents folder, then it opens in Word 2010 instead of Word 97.

(In fact this happened also in the past, after certain Office 2010 updates through Windows Update. To regain control, it was enough to issue the unregserver command followed by regserver from the command line for winword.exe of Word97. This time the above approach doesn't help.

I checked the file paths, 'Opens with' details, etc. and I was unable to find any error. At the same time, if I choose from the Start Menu:

1. 'Open Office97 document' and double click on any of the Word97 documents from the My Documents folder or Desktop, then they open in Word97

or

2. Programs| MS Office and double click on Word97 icon (link), then a blank Word97 document opens.

I'm completely stuck with this issue. How can one fix it?

Why has Office 365 Home premium failed again?

Posted: 12 Jun 2014 08:03 AM PDT

On 2nd June I had to uninstall then reinstall my Microsoft office because  none of it was working. I had to go through the help desk to do this as I am a technophobe. Now it has all stopped working again. What is wrong with this operating system? Will we get a refund for all the days when it's not working? I paid for Home premium, thinking it would be a good reliable user-friendly system. It certainly doesn't seem to be!

To say I'm disappointed is so far short of the mark.

Help! Is there an alternative system I could use? I'm not looking forward to doing this every 10 days.

I want to export a document that has hyperlinks to files on my computer. Can I export it and keep the hyperlinks to other files?

Posted: 12 Jun 2014 07:34 AM PDT

I want to export a document that has hyperlinks to files on my computer. Can I export it and keep the hyperlinks to other files?  Right now the hyperlinks go to PDF's in a file on my computer.  I would like to be able to share the file with my coworkers and keep the hyperlinks.  Will I have to change the file type and group them together? and if so, how do I do that?

Any direction on this would be appreciated! Thank you!

Row height issue in Word 2007

Posted: 12 Jun 2014 07:31 AM PDT

I'm modifying a document originally created by someone else within the company. It contains a table with text at 12pt Arial in each cell, but the row height is quite small i.e. the rows are quite close together.

I need to add a couple of rows on to the end of the table. I do this in the usual way and they appear OK, but the height is larger then the rest of the table and I can't see which setting is different. I could get them to match by setting the height for the new rows to 'exactly' rather than 'at least' but this is cheating! The existing rows are set to 'at least' so what is different?

I've checked the row settings, table settings, paragraph settings and font settings and they're all the same.

Why do they look different?

Alan

Trouble with list of figure in Word 2010

Posted: 12 Jun 2014 07:23 AM PDT

In an existing word document, I have a list of figures that is hyperlinked to numbered figures throughout the document. I had to had a new figure in the middle of the document (ex: Figure 10) and now I have two "Figure 10"s and the numbers for the figure beyond 10 are now one off. The hyperlinks are all still working, but is there a way for Word to easily fix the numbering issues in the list of figures as well as throughout the document?

I have tried clicking on "update table" under the references tab, but that just completely deletes my new "Figure 10" from the list of figures.

word startet nicht

Posted: 12 Jun 2014 07:15 AM PDT

word startet nicht mehr, was kann ich tun?

Word 365 - Scroll Bar Becomes Unresponsive After About 5 Seconds Even If Mouse Is Still Hovering Over

Posted: 12 Jun 2014 06:43 AM PDT

I'm on Win 8.1 fully updated, with Office 365.

I was reading through the pages of one of my books, and I hovered my mouse over the vertical scroll bar near the bottom in order to be able to scroll one page (the window is just the right size so that the pages scroll perfectly).

One page took me a little longer than the others and I noticed the scroll bar stopped working.  At first I thought that maybe I'd accidentally pushed the mouse off the edge of the scroll bar, and sure enough when I moved it a little to the left it worked again.

But what's really happening is that the scroll bar is timing out, and even though I've got the mouse properly positioned it's not scrolling.

I can tell when it happens... 

When I first move the mouse onto the scroll bar both the horizontal and vertical scroll bars light up.  At that point I can click and scroll by page.  But if I leave the mouse on the scroll bar for a while I notice the other one (in this case the horizontal scroll bar) grays out again.

Graphically, in this case, as the mouse has recently arrived over the vertical scroll bar, clicking the mouse will cause scrolling to work.  Once the mouse has been there without moving for about 5 seconds, the horizontal scroll bar fades out and I can no longer click the vertical scroll bar to scroll the document vertically, even though the vertical scroll bar still shows as active.

-Noel

Detailed how-to in my eBooks:  

Configure The Windows 7 "To Work" Options
Configure The Windows 8 "To Work" Options

How to permanently turn on Read receipt checkbox (while sending a mail from Word 2010)

Posted: 12 Jun 2014 04:42 AM PDT

I'm sending email directly from Word via command: File -> Save & Send -> Send as Attachment. The problem is each time I have to check the Read receipt checkbox on the 'Options' tab. I'm not able to turn it permanently on. I tried the Settings in Outlook but it seems to me it has nothing to do with it.

how to get rid of a broken border

Posted: 12 Jun 2014 02:19 AM PDT

Hi all

I have this broken line as seen in the attached photo. I looked all over but I have no clue how to remove it. I'm sure it's an easy click but I cannot find that remove option.


thank you in advanced

Eyal

p.s. - it's not in paragraph - borders

MS Office issue

Posted: 12 Jun 2014 12:11 AM PDT

I own a Samsung Notebook 9 Lite Windows 8 and installed MS Office on it a few months ago. It was working fine until a couple of days ago. Now none of the Office applications open and not even a message pops up to tell me what the problem is. Any thoughts on how to fix this would be greatly appreciated.

Template Automation

Posted: 11 Jun 2014 11:52 PM PDT

Hi,

I am currently creating a letter template for my office to use. I want to create one template that has information defined by the author of the document (not the template). Currently I have managed to insert the document author's full name using 'Quick Parts > Document Property > Author' however, I would like to be able to insert other fields such as the first name only, initials and mobile number of the document author.

Is this possible?

I have managed to replicate this with the 'User' initals but we need the information to be defined by the author, not the user.

We are all on the same Office 365 network and have our own individual Office 365 accounts if that helps at all.

Kind regards,

Matt

Numbered and Non-Numbered Heading Styles in Same Template

Posted: 11 Jun 2014 09:53 PM PDT

I am using MS Word 2010 on Win 7. I am trying to make headings number sequentially, using the method in Shauna Kelley's Outline Numbering in Word which seems to be the definitive source for how to link outline numbers to styles.

But I want to refine it by presenting users with a choice of either non-numbered or numbered headings so that users can choose to have either Standard:

Heading 1

 Heading 2

   Heading 3

or Numbered Headings:

1. Heading 1

  1.1 Heading 2

    1.1.1 Heading 3

To do this, I would like to set up two sets of headings: Heading 1, 2, and 3, and Numbered Heading 1,2 and 3.  (I only need three levels.)

The thing is, MS Word gets very confused when I try and do it using Shauna Kelley's method.  It invariably adds numbers to the Heading 1 style, which i am trying to keep plain. Then if I redefine that style to have 'no number', the Numbered Headings go out of sequence.

(The reason is, the same template is used for small documents of 3-4 pages where numbered headings are unnecessary, and also large documents of 100 pages or more, where you need numbered headings.)

If anyone has any experience with this, would very much like to hear about it.

I want to transform(xslt) MS word XML into customized XML with retain paragraph/character style properties in it.

Posted: 11 Jun 2014 09:59 AM PDT

I want to retain the formatting like bold, italic etc from style definition and its paragraph properties like left indent, hanging and etc. Can anybody help on this xsl tranformation from ms word 2003 to customized xml or html.

Duplicate Email - Microsoft Exchange

Duplicate Email - Microsoft Exchange

Duplicate Email

Posted: 12 Dec 2006 12:16 PM PST

Verify the user has no Outlook Rules that me casuing this.

--
John Oliver, Jr
MCSE, MCT, CCNA
Exchange MVP 2007
Microsoft Certified Partner

"u45106" <microsoft.com> wrote in message
news:com... 

Immediate NDR bounces back

Posted: 09 Dec 2006 03:03 AM PST

this problem is occuring once in a blue moon.....may be it is working
fine when selecting the recipients from the TO tab....i was only
curious to know where the problem was...or why is it hapenning..

Lanwench [MVP - Exchange] wrote: 

Bizarre Problem mails are delivered over and over again

Posted: 08 Dec 2006 01:03 PM PST

Cheerio Lanwench,

no POP-connector in use here. Just plain SMTP traffic to our ISP`s mail
server. My firewall`s a MS ISA 2004 Server, redirecting port 25 to the
internal SBS/Exchange 2003. How does the NIC`s speed and duplex setting
affect (random multiple) delivery of emails?? I never heard this before but
I`m giving it a try. As I said, I´m out of ideas beside stopping Trend-Micro
services on this machine. Thanks for your help anyway, it`s greatly
appreciated!

Cheers,
Michael

"Lanwench [MVP - Exchange]"
<donotsendme.unsolicitedmail.atyahoo.com> schrieb im
Newsbeitrag news:%23nc$phx.gbl... 

Frontend Server for OWA

Posted: 07 Dec 2006 09:09 PM PST

Ooops, my bad. Didn't pay enough attention to that.
So yes, the OP will need to prevent access to the FE from users on the
Internet. This would be best achieved with ISA and an access list
allowing group member in and denying access to other group members.

[OT] Recomendations/experiences

Posted: 07 Dec 2006 08:51 AM PST

On Sat, 9 Dec 2006 10:42:01 +0100, "filip" <hr> wrote:
 

If you have Exchange Standard Edition then you can only have 75GB for
the mailbox store which is the same number as the ssame thing as "all
mailboxes"
 

Enterprise Edition, which gives you 20 stores, each of which are
unlimited in size. 
Having PST files open on the network is the bad thing.
 

continuously memory increase on front end server

Posted: 06 Dec 2006 08:43 AM PST

Well that answer has the same effect of leading one towards Exchange
itself rather than merely IIS.
Good idea to check all the build states for SP level and pathes.
Post the numbers back here if you need and someone might be able to
look through them and point you to an out of date something or other,
be it Exchange or IIS.

Mailbox Logoff time

Posted: 06 Dec 2006 08:39 AM PST

I'm with Peter on this one. Either the customer wants to listen to
reason or they don't.
Exactly what on earth is their problem? You can start the mailbox move
with them logged on or you can force them to log off. Once the mailbox
has been moved they can have a standing instruction for people to log
off their PCs and back on again.
You've wasted so much of your own time (not mine because I'm in here
anyway) on trying to find a solution for the customer because the two
(I'm sure you'd already thought of) methods are unacceptable is daft.

Sync OWA and Outlook 2003 After restore

Posted: 05 Dec 2006 07:03 PM PST

I tested as you suggested and it worked out OK using a new .OST file on the
client. I think my troubles were caused by the cached messages in the OST.
That file had to be recreated by using your method, a new profile with a new
name. Thanks a million for your help - Aidan

"SolveIT" wrote:
 

Is there an easy way to get a list of all e-mail addresses serviced by an exchange server?

Posted: 05 Dec 2006 10:09 AM PST

Thank you!

"Bharat Suneja [MVP]" <spam.org> wrote in message
news:phx.gbl... 

Cannot Reconnect mailbox

Posted: 04 Dec 2006 09:46 AM PST

I was thinking you could recover from the Offsite server System State since
it probably has not been replicated yet. In any event, I find it odd you
cannot reconnect the mailbox to any account. Sounds like the mailbox might
still have an account or guid associated with it.

--
John Oliver, Jr
MCSE, MCT, CCNA
Exchange MVP 2007
Microsoft Certified Partner

<com> wrote in message
news:googlegroups.com... 

Help, I moved mailboxes and now can open boxes using "Service account admin" rights

Posted: 04 Dec 2006 08:56 AM PST

Okay,

It looks like I have it working for now. It seems that the "group" that I
gave "Service accout" admin rights to is not working on the "moved" DBs for
some reason. Even though the group is on the security tab with "full"
rights.

I went ahead and just added my AD account the the security tab and gave it
"full" rights and everything started working. If anyone has any ideas on
how to get the group working again that would be great. I will try (at a
later time) to delete the group from those DBs and re-add the group and is
if that fixes that problem.

Thanks for everyone's help.


Clayton



"Clayton Sutton" <com> wrote in message
news:JKYch.372452$news.easynews.com... 

5.7.1 error on only 1 user

Posted: 04 Dec 2006 08:10 AM PST

Thanks for info, problem was MailSweeper not relaying .co.uk mails. Added
and all fine now.

Cheers

"Pablo Pecanto" <org> wrote in message
news:phx.gbl... 

OWA to POP, IMAP: OWA access, need pop3, IMAP, or Forwarding

Posted: 04 Dec 2006 07:16 AM PST

If you had access to the Administrators I might suggest that they
delete your mailbox and instead create a mail enabled contact that
pointed to your Exchange account.

IE 7 with Exchange 2003 SP2

Posted: 04 Dec 2006 01:03 AM PST

In news:phx.gbl,
news.microsoft.com <com> typed: 

Not specifically, but why on earth are they putting IE7 on this server to
begin with? Nobody should be doing any web surfing on this box anyway. If
removing IE7 fixes the problem, I'd say that's good enough to go with for
now. I don't put IE7 on my clients' desktops yet, let alone a server. I
wouldn't mind if I could take IE off my servers entirely, to be honest.

PS: No need to crosspost to quite so many groups. Most people subscribe to
multiple groups and you will get plenty of 'eyes' seeing your message if you
pick a small handful of relevant groups to post your message in. 

Inbound SMTP Problem

Posted: 01 Dec 2006 02:53 AM PST

"Mark Arnold [MVP]" <org> wrote in message
 

It's not that the service stops... everything appears fine but the mail
doesn't flow. Stopping the service is a problem as it doesn't stop in a
timely fashion.


Tim

NAS header in message body

Posted: 28 Nov 2006 10:02 AM PST

Fredly <com> wrote:
 

Someone sent them an ill-formed message.
--
Brian Tillman

EMAILS WITH UNDISCLOSED RECEPIENTS

Posted: 28 Nov 2006 06:49 AM PST

On Thu, 30 Nov 2006 11:03:00 -0800, "Ed Crowley [MVP]"
<org> wrote:
 

Agreed. But it's still troublesome enough to have it's own KB article
that's about the same length as War & Peace. It's troublesome enough
for it to appear in here ever single damn day.
For the sake of fifty Euro's (what's that these days, about six
dollars?) a new POP3 connector for people that don't have the option
of going SMTP is a price worth paying.

where are wombats?

Posted: 27 Nov 2006 05:02 PM PST

net wrote: 
know anyone who eats roots shoots and leaves?

rb

How do I determine what is in hda1 (/)? - Forums Linux

How do I determine what is in hda1 (/)? - Forums Linux

How do I determine what is in hda1 (/)?

Posted: 14 Jun 2006 03:55 PM PDT

In comp.os.linux.setup Robert Hull <do-not-spam.me.uk> wrote: 
 
 
 

Thanks. It is interesting that /etc, /lib, /sbin, etc. are in this hda1 partition. It appears that /lib/modules is
my biggest hog (2.6.14-2-k7 Kernel modules) according to my cleaned up list result:

9489 /etc
3057 /bin
169 /boot/grub
3158 /boot
90 /dev
50568 /lib/modules (2.6.14-2-k7 Kernel)
60977 /lib
3 /mnt
0 /proc
8127 /root
4024 /sbin
0 /sys
1 /srv
1 /opt
1 /initrd
4 /others
4 /stuff
4 /storage
88968 /
--
"... Our world is not an ant farm!" --Duncan MacLeod (Highlander Season 3 Finale Part II)
/\___/\
/ /\ /\ \ Phillip (Ant) @ http://antfarm.ma.cx (Personal Web Site)
| |o o| | Ant's Quality Foraged Links (AQFL): http://aqfl.net
\ _ / Please remove ANT if replying by e-mail.
( )

Changing Variables Via Webmin

Posted: 14 Jun 2006 02:37 PM PDT


"Bit Twister" <com> wrote in message
news:home.invalid... 

Changing your domain name while running an X session can create....
adventures. Look at your /setc/sysconfig files and look for the domain name,
and look in /etc/resolv.conf for your DNS settings. There are sometimes
other tools for this, such as system-config-network under RedHat and Fedora
Core.
 

Cron question

Posted: 14 Jun 2006 11:51 AM PDT

On 14 Jun 2006 14:04:03 -0700, com wrote: 


Since it appears that you are using Google to post to Usenet, you
realy need to take time to read

http://cfaj.freeshell.org/google/

Do read the links at the bottom the the above webpage.

I suggest checking if your ISP has a Usenet News server. If so,
you need to use it with a usenet complient reader instead of using
google to post usenet questions.

----------- standard New to Linux included text follows -------------

Other people's Free advice:
http://www.catb.org/~esr/faqs/smart-questions.html
http://livinginternet.com/u/ua.htm <--- Advanced Usenet Usage
http://tgos.org/newbie/rules.html <--- Good Usenet etiquette

and do bookmark this very large, Frequently Asked Questions (faq) search engine
http://groups.google.com/advanced_group_search
key words(s) in the first box
*linux* in Newsgroup box. You need to use the two
asterisks around linux, pick English

----------- end of New to Linux included text ------------------------


You create the kill script, launch the script to kill and verify the
kill script can find the other script and can kill it.
It is good practice to set the shell and PATH at the top of the
scripts which run in cron.
Lots of script examples can be found in /etc/init.d


Once both scripts run, then you put them in cron, set a small time and
test. If works then change the runtimes to production values.

Now, if you were to do a
man man
to learn about the manual subsystem you would find you can do a
man -k cron
to get some manual pages for reading

Examples:
man 1 crontab
man 5 crontab
man cron

I'll suggest you might want to read
man pkill
man kill
man pgrep
man grep

and for extra points, there is
! bash script advanced documentation
http://tldp.org/LDP/abs/html/index.html

! bash script introduction to Linux documentation
http://tldp.org/LDP/intro-linux/html/index.html

Using mailx to send email - differences to solaris

Posted: 14 Jun 2006 06:45 AM PDT

In article <home.invalid>, Bit Twister
says... 

Thanks, worked around it with a direct call to

sendmail -t -f com < inputfile


--

jeremy

maybe of help in redhat issues

Posted: 14 Jun 2006 03:08 AM PDT

On Wed, 14 Jun 2006 10:08:22 +0000, Matt Giwer wrote:
 

Look at your ${PATH} variable, like this:

$ echo ${PATH}

It will probably show that "/usr/local/bin" is listed BEFORE the
"/usr/bin" system files. This is a terrible security hole and just
wrong, wrong, wrong. Looks like your sysadmin screwed up. Shoot
him. Better yet, send him to a sysadmin class.

Then look to your shell start-up scripts ( "~/.bashrc" and the like)
as well as the system-wide settings in "/etc/profile.d". Find and
fix the file that puts local, customized directories (such as
"/usr/local/bin" and "~/bin") BEFORE the distribution's system
directories like "/usr/bin".

--
I'm already an anomaly, I shall soon be an anachronism, and I have
every intention of dying an abuse!

Something wreaked havoc with my file permissions...

Posted: 12 Jun 2006 08:40 PM PDT

After reading a bit on the topic on usenet, I opted for reinstalling
the system. Luckily, I found an old image of this system from
last year, so I didn't have to do the whole process from scratch.

Nico Kadel-Garcia wrote: 

My mistake. A while ago, late at night, I was playing with permissions
in
my /mnt directory under the assumption that the system was mounted and
that I was operating from an alternative installation... It was not...
So the new permissions automatically extended to the subsystem in
question,
which at the time was mounted in the /mnt directory...
Big, big mistake, and a lesson that will stay with me for good.

getting firefox to display chinese fonts on fedora core 5

Posted: 11 Jun 2006 07:16 AM PDT

Spamless wrote: 

You can get it: use a "wget -c" operation on your local FTP mirror.

Extracting and tarballing and compressing them somewhere else won't help you
much: they're compressed in the RPM, and the RPM is almost entirely made of
the fonts, so you'll have nearly 20 MB to transfer some other way.

How to escape the { braces } in the tcsh??

Posted: 10 Jun 2006 11:26 PM PDT

Mark wrote: 

Hi Mark:

The mailbox is in a host and my shell account in another. The braces
tell mutt to go in "IMAP mode" and open a network connection to the
remote host where the mailbox resides.

-Ramon

how to deinstall linux

Posted: 09 Jun 2006 02:30 PM PDT


Nico Kadel-Garcia wrote:
 

Ok Nico, I can follow this through. We're moving house at the moment so
it might take a little while to get it done; I'll post if I need more
help.
Thanks so far

Chris

Heavy packet Loss & then recovery

Posted: 06 Jun 2006 05:54 PM PDT


Moe Trin wrote: 

Been running these for 2 days now. The machine seems to be bahaving
itself. I
disabled the firewall. network mask is 255.255.255.0.

How to install if you can't boot CD?

Posted: 06 Jun 2006 04:06 PM PDT

Unruh wrote:
 

Is your particular Mandriva using a 2.6 kernel? That apparently makes a big
difference.

But that stripping process to get it on a floppy or two takes serious work
these days: it's gotten much easier to simply include the kitchen sink kand
not worry about floppy boots, especially as cheap new desktops don't even
bother to include a floppy these days.

hard drive partitioning software

Posted: 05 Jun 2006 09:28 PM PDT


<com> wrote in message
news:googlegroups.com... 

It's built into the installation CD's. Which Linux distribution are you
working with?

C-shell login script

Posted: 05 Jun 2006 01:24 PM PDT

On 12 Jun 2006 18:42:42 -0700, com
<com> wrote: 

~/ is short for your home directory. If you cd out of your home, you
should see the full path. If you want to change the prompt, RTFM and
look at what is in your .cshrc or /etc/csh.cshrc.


--
You will be misunderstood by everyone.

Problems with java pluin in Firefox

Posted: 04 Jun 2006 02:49 PM PDT

Please find below an error report, that might help solve this yet unsolved problem:

/Flemming Hansen

#
# An unexpected error has been detected by HotSpot Virtual Machine:
#
# SIGSEGV (0xb) at pc=0x008698ac, pid=6387, tid=32766896
#
# Java VM: Java HotSpot(TM) Client VM (1.5.0_06-b05 mixed mode, sharing)
# Problematic frame:
# C [libc.so.6+0x6b8ac] memcpy+0x1c
#

--------------- T H R E A D ---------------

Current thread (0x09d3ca20): JavaThread "Thread-5" [_thread_in_native, id=6409]

siginfo:si_signo=11, si_errno=0, si_code=2, si_addr=0x01ebf000

Registers:
EAX=0x0048a068, EBX=0x00922ff4, ECX=0x00000188, EDX=0x00000f98
ESP=0x01ebe4fc, EBP=0x01ebe524, ESI=0x0048a9e0, EDI=0x01ebf000
EIP=0x008698ac, CR2=0x01ebf000, EFLAGS=0x00210212

Top of Stack: (sp=0x01ebe4fc)
0x01ebe4fc: 00854287 01ebe688 0048a068 00000f98
0x01ebe50c: 01ebe688 00000000 00000000 00922ff4
0x01ebe51c: 01ebe688 09d466c8 01ebe548 008541f1
0x01ebe52c: 09d466c8 01ebe688 0003ffe7 0000000a
0x01ebe53c: 00000001 00000000 00922ff4 01ebe574
0x01ebe54c: 0085b9d8 09d466c8 01ebe688 0003ffe7
0x01ebe55c: 0000000a 00000001 00000000 00654ff4
0x01ebe56c: 01ebe688 01f3e67c 01ebe5d8 0064e347

Instructions: (pc=0x008698ac)
0x0086989c: 8b 74 24 08 fc d1 e9 73 01 a4 d1 e9 73 02 66 a5
0x008698ac: f3 a5 89 c7 89 d6 8b 44 24 04 c3 90 55 89 e5 57

Stack: [0x01ebf000,0x01f40000), sp=0x01ebe4fc, free space=-3k
Native frames: (J=compiled Java code, j=interpreted, Vv=VM code, C=native code)
C [libc.so.6+0x6b8ac] memcpy+0x1c
C [libc.so.6+0x561f1] _IO_getline+0x41
C [libc.so.6+0x5d9d8] fgets_unlocked+0x58
C [libnss_files.so.2+0x3347]
C [libnss_files.so.2+0x3f9f] _nss_files_gethostbyname2_r+0xac

Java frames: (J=compiled Java code, j=interpreted, Vv=VM code)
j java.net.Inet6AddressImpl.lookupAllHostAddr(Ljava/lang/String;)[[B+0
j java.net.InetAddress$1.lookupAllHostAddr(Ljava/lang/String;)[[B+4
j java.net.InetAddress.getAddressFromNameService(Lja va/lang/String;)Ljava/lang/Object;+17
j java.net.InetAddress.getAllByName0(Ljava/lang/String;Z)[Ljava/net/InetAddress;+35
j java.net.InetAddress.getAllByName0(Ljava/lang/String;)[Ljava/net/InetAddress;+2
j java.net.InetAddress.getAllByName(Ljava/lang/String;)[Ljava/net/InetAddress;+319
j java.net.InetAddress.getByName(Ljava/lang/String;)Ljava/net/InetAddress;+1
j java.net.URLStreamHandler.getHostAddress(Ljava/net/URL;)Ljava/net/InetAddress;+34
j java.net.URLStreamHandler.hashCode(Ljava/net/URL;)I+20
j java.net.URL.hashCode()I+19
J java.util.HashMap.hash(Ljava/lang/Object;)I
j java.util.HashMap.containsKey(Ljava/lang/Object;)Z+6
j sun.misc.URLClassPath.getLoader(I)Lsun/misc/URLClassPath$Loader;+62
j sun.misc.URLClassPath.getResource(Ljava/lang/String;Z)Lsun/misc/Resource;+6
j java.net.URLClassLoader$1.run()Ljava/lang/Object;+26
v ~StubRoutines::call_stub
j
java.security.AccessController.doPrivileged(Ljava/security/PrivilegedExceptionAction;Ljava/security/AccessControlContext;)Ljava/lang/Object;+0
j java.net.URLClassLoader.findClass(Ljava/lang/String;)Ljava/lang/Class;+13
j sun.applet.AppletClassLoader.findClass(Ljava/lang/String;)Ljava/lang/Class;+34
j java.lang.ClassLoader.loadClass(Ljava/lang/String;Z)Ljava/lang/Class;+43
j sun.applet.AppletClassLoader.loadClass(Ljava/lang/String;Z)Ljava/lang/Class;+36
j java.lang.ClassLoader.loadClass(Ljava/lang/String;)Ljava/lang/Class;+3
j sun.applet.AppletClassLoader.loadCode(Ljava/lang/String;)Ljava/lang/Class;+105
j sun.applet.AppletPanel.createApplet(Lsun/applet/AppletClassLoader;)Ljava/applet/Applet;+83
j sun.plugin.AppletViewer.createApplet(Lsun/applet/AppletClassLoader;)Ljava/applet/Applet;+9
j sun.applet.AppletPanel.runLoader()V+65
j sun.applet.AppletPanel.run()V+13
j java.lang.Thread.run()V+11
v ~StubRoutines::call_stub

--------------- P R O C E S S ---------------

Java Threads: ( => current thread )
=>0x09d3ca20 JavaThread "Thread-5" [_thread_in_native, id=6409]
0x09d3e600 JavaThread "Thread-4" [_thread_blocked, id=6408]
0x09d3d7e8 JavaThread "thread applet-dk.sdc.securityapplet.applets.logon.LogonApplet.cl ass"
[_thread_blocked, id=6407]
0x09d38090 JavaThread "AWT-EventQueue-0" [_thread_blocked, id=6404]
0x09d37af0 JavaThread "AWT-Shutdown" [_thread_blocked, id=6403]
0x09d1bc68 JavaThread "Thread-2" [_thread_in_native, id=6402]
0x09cfef08 JavaThread "Thread-1" [_thread_blocked, id=6399]
0x09cf7158 JavaThread "traceMsgQueueThread" daemon [_thread_blocked, id=6397]
0x09c6d058 JavaThread "AWT-XAWT" daemon [_thread_in_native, id=6396]
0x09c28bb0 JavaThread "Java2D Disposer" daemon [_thread_blocked, id=6395]
0x09a0dcd0 JavaThread "Low Memory Detector" daemon [_thread_blocked, id=6393]
0x09a0c728 JavaThread "CompilerThread0" daemon [_thread_blocked, id=6392]
0x09a0b7b8 JavaThread "Signal Dispatcher" daemon [_thread_blocked, id=6391]
0x09a04c30 JavaThread "Finalizer" daemon [_thread_blocked, id=6390]
0x09a03ec0 JavaThread "Reference Handler" daemon [_thread_blocked, id=6389]
0x099c0448 JavaThread "main" [_thread_in_native, id=6387]

Other Threads:
0x09a01330 VMThread [id=6388]
0x09a0f1b8 WatcherThread [id=6394]

VM state:not at safepoint (normal execution)

VM Mutex/Monitor currently owned by a thread: None

Heap
def new generation total 576K, used 321K [0x89080000, 0x89120000, 0x89560000)
eden space 512K, 50% used [0x89080000, 0x890c0680, 0x89100000)
from space 64K, 100% used [0x89110000, 0x89120000, 0x89120000)
to space 64K, 0% used [0x89100000, 0x89100000, 0x89110000)
tenured generation total 1408K, used 870K [0x89560000, 0x896c0000, 0x8d080000)
the space 1408K, 61% used [0x89560000, 0x89639838, 0x89639a00, 0x896c0000)
compacting perm gen total 8192K, used 1678K [0x8d080000, 0x8d880000, 0x91080000)
the space 8192K, 20% used [0x8d080000, 0x8d223bc0, 0x8d223c00, 0x8d880000)
ro space 8192K, 64% used [0x91080000, 0x915aa490, 0x915aa600, 0x91880000)
rw space 12288K, 47% used [0x91880000, 0x91e3b708, 0x91e3b800, 0x92480000)

Dynamic libraries:
00111000-00112000 rwxp 00111000 00:00 0
00112000-00135000 r-xp 00000000 fd:00 752460 /lib/libm-2.3.6.so
00135000-00136000 r-xp 00022000 fd:00 752460 /lib/libm-2.3.6.so
00136000-00137000 rwxp 00023000 fd:00 752460 /lib/libm-2.3.6.so
00137000-001a5000 rwxp 00137000 00:00 0
001a5000-00221000 rwxp 001a5000 00:00 0
00221000-00226000 rwxp 00221000 00:00 0
00226000-00242000 rwxp 00226000 00:00 0
00242000-00247000 rwxp 00242000 00:00 0
00247000-00248000 --xp 00247000 00:00 0
00248000-002c8000 rwxp 00248000 00:00 0
002c8000-002ca000 r-xs 00000000 fd:00 1700597 /opt/jre1.5.0_06/lib/ext/dnsns.jar
002ca000-002d8000 r-xp 00000000 fd:00 549420 /usr/X11R6/lib/libXext.so.6.4
002d8000-002d9000 rwxp 0000d000 fd:00 549420 /usr/X11R6/lib/libXext.so.6.4
002d9000-003bb000 r-xs 00000000 fd:00 1700598 /opt/jre1.5.0_06/lib/plugin.jar
003bb000-003c2000 r-xs 00000000 fd:00 550677 /usr/lib/gconv/gconv-modules.cache
003c2000-003c3000 r-xp 00000000 fd:00 686732 /usr/X11R6/lib/X11/locale/lib/common/xlcUTF8Load.so.2
003c3000-003c4000 rwxp 00000000 fd:00 686732 /usr/X11R6/lib/X11/locale/lib/common/xlcUTF8Load.so.2
003c4000-003cf000 r-xp 00000000 fd:00 1700558 /opt/jre1.5.0_06/lib/i386/libverify.so
003cf000-003d0000 rwxp 0000b000 fd:00 1700558 /opt/jre1.5.0_06/lib/i386/libverify.so
003d0000-003d3000 --xp 003d0000 00:00 0
003d3000-00451000 rwxp 003d3000 00:00 0
00451000-0047c000 r-xs 00000000 fd:00 1700596 /opt/jre1.5.0_06/lib/ext/sunpkcs11.jar
0047c000-00485000 r-xp 00000000 fd:00 549430 /usr/X11R6/lib/libXcursor.so.1.0.2
00485000-00486000 rwxp 00008000 fd:00 549430 /usr/X11R6/lib/libXcursor.so.1.0.2
00486000-00489000 r-xp 00000000 fd:00 1700549 /opt/jre1.5.0_06/lib/i386/libdeploy.so
00489000-0048a000 rwxp 00002000 fd:00 1700549 /opt/jre1.5.0_06/lib/i386/libdeploy.so
0048a000-0048b000 rwxp 0048a000 00:00 0
0048d000-0048e000 r-xp 0048d000 00:00 0
0048e000-004b4000 r-xs 00000000 fd:00 1700595 /opt/jre1.5.0_06/lib/ext/sunjce_provider.jar
004b4000-004ea000 r-xp 00000000 fd:00 1700578 /opt/jre1.5.0_06/lib/i386/xawt/libmawt.so
004ea000-004ed000 rwxp 00035000 fd:00 1700578 /opt/jre1.5.0_06/lib/i386/xawt/libmawt.so
004ed000-004ee000 rwxp 004ed000 00:00 0
004ee000-00565000 r-xs 00000000 fd:00 1701152 /opt/jre1.5.0_06/lib/jsse.jar
00565000-00568000 --xp 00565000 00:00 0
00568000-005e6000 rwxp 00568000 00:00 0
005e6000-005fa000 r-xp 00000000 fd:00 1700565 /opt/jre1.5.0_06/lib/i386/libnet.so
005fa000-005fb000 rwxp 00013000 fd:00 1700565 /opt/jre1.5.0_06/lib/i386/libnet.so
00607000-0061a000 r-xp 00000000 fd:00 1700562 /opt/jre1.5.0_06/lib/i386/libzip.so
0061a000-0061c000 rwxp 00012000 fd:00 1700562 /opt/jre1.5.0_06/lib/i386/libzip.so
0061e000-00626000 rwxs 00000000 fd:00 359557 /tmp/hsperfdata_root/6387
00626000-0062d000 r-xp 00000000 fd:00 549421 /usr/X11R6/lib/libXrender.so.1.2.2
0062d000-0062e000 rwxp 00007000 fd:00 549421 /usr/X11R6/lib/libXrender.so.1.2.2
0064b000-00654000 r-xp 00000000 fd:00 947539 /lib/libnss_files-2.3.6.so
00654000-00655000 r-xp 00008000 fd:00 947539 /lib/libnss_files-2.3.6.so
00655000-00656000 rwxp 00009000 fd:00 947539 /lib/libnss_files-2.3.6.so
0066d000-00673000 r-xp 00000000 fd:00 1700544 /opt/jre1.5.0_06/lib/i386/native_threads/libhpi.so
00673000-00674000 rwxp 00006000 fd:00 1700544 /opt/jre1.5.0_06/lib/i386/native_threads/libhpi.so
00674000-00677000 --xp 00674000 00:00 0
00677000-006f5000 rwxp 00677000 00:00 0
006f5000-00708000 r-xp 00000000 fd:00 1700555 /opt/jre1.5.0_06/lib/i386/libjavaplugin_jni.so
00708000-00709000 rwxp 00012000 fd:00 1700555 /opt/jre1.5.0_06/lib/i386/libjavaplugin_jni.so
00709000-0071d000 rwxp 00709000 00:00 0
0071e000-00725000 rwxp 0071e000 00:00 0
00725000-00728000 --xp 00725000 00:00 0
00728000-007a6000 rwxp 00728000 00:00 0
007df000-007e0000 r-xp 007df000 00:00 0 [vdso]
007e0000-007fa000 r-xp 00000000 fd:00 947594 /lib/ld-2.3.6.so
007fa000-007fb000 r-xp 00019000 fd:00 947594 /lib/ld-2.3.6.so
007fb000-007fc000 rwxp 0001a000 fd:00 947594 /lib/ld-2.3.6.so
007fe000-00921000 r-xp 00000000 fd:00 947601 /lib/libc-2.3.6.so
00921000-00923000 r-xp 00122000 fd:00 947601 /lib/libc-2.3.6.so
00923000-00925000 rwxp 00124000 fd:00 947601 /lib/libc-2.3.6.so
00925000-00927000 rwxp 00925000 00:00 0
00950000-00952000 r-xp 00000000 fd:00 947627 /lib/libdl-2.3.6.so
00952000-00953000 r-xp 00001000 fd:00 947627 /lib/libdl-2.3.6.so
00953000-00954000 rwxp 00002000 fd:00 947627 /lib/libdl-2.3.6.so
00962000-00963000 rwxp 00962000 00:00 0
00963000-00964000 rwxp 00963000 00:00 0
00964000-00966000 rwxp 00964000 00:00 0
00966000-00982000 rwxp 00966000 00:00 0
00982000-00986000 rwxp 00982000 00:00 0
00986000-009a2000 rwxp 00986000 00:00 0
009a2000-009ad000 rwxp 009a2000 00:00 0
009f3000-00a14000 r-xp 00000000 fd:00 1700560 /opt/jre1.5.0_06/lib/i386/libjava.so
00a14000-00a16000 rwxp 00020000 fd:00 1700560 /opt/jre1.5.0_06/lib/i386/libjava.so
00a40000-00a4e000 r-xp 00000000 fd:00 1212461 /lib/libpthread-2.3.6.so
00a4e000-00a4f000 r-xp 0000d000 fd:00 1212461 /lib/libpthread-2.3.6.so
00a4f000-00a50000 rwxp 0000e000 fd:00 1212461 /lib/libpthread-2.3.6.so
00a50000-00a52000 rwxp 00a50000 00:00 0
00a52000-00a55000 --xp 00a52000 00:00 0
00a55000-00ad3000 rwxp 00a55000 00:00 0
00ada000-00aee000 r-xs 00000000 fd:00 1700599 /opt/jre1.5.0_06/lib/jce.jar
00aee000-00cd3000 r-xs 00000000 fd:00 1701142 /opt/jre1.5.0_06/lib/deploy.jar
00ce0000-00ce1000 rwxp 00ce0000 00:00 0
00ce1000-00cfe000 rwxp 00ce1000 00:00 0
00cfe000-00cff000 --xp 00cfe000 00:00 0
00cff000-00d7f000 rwxp 00cff000 00:00 0
00d91000-00da2000 r-xp 00000000 fd:00 947625 /lib/libnsl-2.3.6.so
00da2000-00da3000 r-xp 00010000 fd:00 947625 /lib/libnsl-2.3.6.so
00da3000-00da4000 rwxp 00011000 fd:00 947625 /lib/libnsl-2.3.6.so
00da4000-00da6000 rwxp 00da4000 00:00 0
00e26000-00e27000 rwxp 00e26000 00:00 0
00e27000-01187000 r-xp 00000000 fd:00 1700551 /opt/jre1.5.0_06/lib/i386/client/libjvm.so
01187000-011a5000 rwxp 0035f000 fd:00 1700551 /opt/jre1.5.0_06/lib/i386/client/libjvm.so
011a5000-015bb000 rwxp 011a5000 00:00 0
015bb000-017bb000 r-xp 00000000 fd:00 527453 /usr/lib/locale/locale-archive
017bb000-0187e000 r-xs 00000000 fd:00 1701168 /opt/jre1.5.0_06/lib/ext/localedata.jar
0187e000-018f3000 r-xp 00000000 fd:00 1700574 /opt/jre1.5.0_06/lib/i386/libawt.so
018f3000-018f9000 rwxp 00074000 fd:00 1700574 /opt/jre1.5.0_06/lib/i386/libawt.so
018f9000-0191d000 rwxp 018f9000 00:00 0
0191d000-019e3000 r-xp 00000000 fd:00 1700573 /opt/jre1.5.0_06/lib/i386/libmlib_image.so
019e3000-019e4000 rwxp 000c5000 fd:00 1700573 /opt/jre1.5.0_06/lib/i386/libmlib_image.so
019e4000-01ab3000 r-xp 00000000 fd:00 549419 /usr/X11R6/lib/libX11.so.6.2
01ab3000-01ab7000 rwxp 000cf000 fd:00 549419 /usr/X11R6/lib/libX11.so.6.2
01ab7000-01b2a000 r-xp 00000000 fd:00 1700583 /opt/jre1.5.0_06/lib/i386/libfontmanager.so
01b2a000-01b34000 rwxp 00073000 fd:00 1700583 /opt/jre1.5.0_06/lib/i386/libfontmanager.so
01b34000-01b38000 rwxp 01b34000 00:00 0
01b38000-01b3b000 --xp 01b38000 00:00 0
01b3b000-01bb9000 rwxp 01b3b000 00:00 0
01bb9000-01bbc000 --xp 01bb9000 00:00 0
01bbc000-01c3a000 rwxp 01bbc000 00:00 0
01c3a000-01c3d000 --xp 01c3a000 00:00 0
01c3d000-01cbb000 rwxp 01c3d000 00:00 0
01cbb000-01cbe000 --xp 01cbb000 00:00 0
01cbe000-01d3c000 rwxp 01cbe000 00:00 0
01d3c000-01d3f000 --xp 01d3c000 00:00 0
01d3f000-01dbd000 rwxp 01d3f000 00:00 0
01dbd000-01dc0000 --xp 01dbd000 00:00 0
01dc0000-01e3e000 rwxp 01dc0000 00:00 0
01e3e000-01e41000 --xp 01e3e000 00:00 0
01e41000-01ec0000 rwxp 01e41000 00:00 0
01ec0000-01ec2000 --xp 01ec0000 00:00 0
01ec2000-01f40000 rwxp 01ec2000 00:00 0
01f40000-01f43000 rwxp 01f40000 00:00 0
01f43000-01fc1000 rwxp 01f43000 00:00 0
01fc1000-01fc4000 --xp 01fc1000 00:00 0
01fc4000-02042000 rwxp 01fc4000 00:00 0
02042000-02045000 --xp 02042000 00:00 0
02045000-020c3000 rwxp 02045000 00:00 0
022ce000-044b8000 r-xs 00000000 fd:00 1701219 /opt/jre1.5.0_06/lib/rt.jar
04d49000-05567000 r-xs 00000000 fd:00 1701167 /opt/jre1.5.0_06/lib/charsets.jar
05567000-0562f000 rwxp 05567000 00:00 0
0562f000-07567000 rwxp 0562f000 00:00 0
08048000-0804c000 r-xp 00000000 fd:00 1700526 /opt/jre1.5.0_06/bin/java_vm
0804c000-0804d000 rwxp 00003000 fd:00 1700526 /opt/jre1.5.0_06/bin/java_vm
099bc000-09d4e000 rwxp 099bc000 00:00 0 [heap]
89080000-89120000 rwxp 89080000 00:00 0
89120000-89560000 rwxp 89120000 00:00 0
89560000-896c0000 rwxp 89560000 00:00 0
896c0000-8d080000 rwxp 896c0000 00:00 0
8d080000-8d880000 rwxp 8d080000 00:00 0
8d880000-91080000 rwxp 8d880000 00:00 0
91080000-915ab000 r-xs 00001000 fd:00 1701148 /opt/jre1.5.0_06/lib/i386/client/classes.jsa
915ab000-91880000 rwxp 915ab000 00:00 0
91880000-91e3c000 rwxp 0052c000 fd:00 1701148 /opt/jre1.5.0_06/lib/i386/client/classes.jsa
91e3c000-92480000 rwxp 91e3c000 00:00 0
92480000-9254b000 rwxp 00ae8000 fd:00 1701148 /opt/jre1.5.0_06/lib/i386/client/classes.jsa
9254b000-92880000 rwxp 9254b000 00:00 0
92880000-92884000 r-xs 00bb3000 fd:00 1701148 /opt/jre1.5.0_06/lib/i386/client/classes.jsa
92884000-92c80000 rwxp 92884000 00:00 0
bfc91000-bfc94000 --xp bfc91000 00:00 0
bfc94000-bfe91000 rwxp bfc94000 00:00 0 [stack]

VM Arguments:
jvm_args: -DtrustProxy=true -Xverify:remote -Djava.protocol.handler.pkgs=sun.plugin.net.protoco l
-Xbootclasspath/a:/opt/jre1.5.0_06/lib/plugin.jar:/opt/jre1.5.0_06/lib/deploy.jar:/opt/jre1.5.0_06/lib/javaplugin_l10n.jar
-Djavaplugin.lib=/opt/jre1.5.0_06/lib/i386/libjavaplugin_jni.so -Dmozilla.workaround=true
-Djavaplugin.nodotversion=150_06 -Djavaplugin.version=1.5.0_06
-Djavaplugin.vm.options=-DtrustProxy=true -Xverify:remote -Djava.class.path=/opt/jre1.5.0_06/classes
-Djava.class.path=/opt/jre1.5.0_06/classes -Djava.protocol.handler.pkgs=sun.plugin.net.protoco l
-Xbootclasspath/a:/opt/jre1.5.0_06/lib/plugin.jar:/opt/jre1.5.0_06/lib/deploy.jar:/opt/jre1.5.0_06/lib/javaplugin_l10n.jar
-Djavaplugin.lib=/opt/jre1.5.0_06/lib/i386/libjavaplugin_jni.so -Dmozilla.workaround=true
-Djavaplugin.nodotversion=150_06 -Djavaplugin.version=1.5.0_06
java_command: <unknown>
Launcher Type: generic

Environment Variables:
JAVA_HOME=/opt/jre1.5.0_06
PATH=/usr/kerberos/sbin:/usr/kerberos/bin:/opt/jre1.5.0_06/bin:/usr/local/sbin:/usr/local/bin:/sbin:/bin:/usr/sbin:/usr/bin:/opt/jdk1.5.0_04/bin:/usr/X11R6/bin:/root/bin:/sbin
LD_LIBRARY_PATH=/opt/jre1.5.0_06/lib/i386/client:/opt/jre1.5.0_06/lib/i386:/opt/firefox:/opt/firefox/plugins:/usr/local/lib/mre/mre-1.5.0.4
SHELL=/bin/bash
DISPLAY=:0.0

Signal Handlers:
SIGSEGV: [libjvm.so+0x31b990], sa_mask[0]=0x7ffbfeff, sa_flags=0x10000004
SIGBUS: [libjvm.so+0x31b990], sa_mask[0]=0x7ffbfeff, sa_flags=0x10000004
SIGFPE: [libjvm.so+0x281230], sa_mask[0]=0x7ffbfeff, sa_flags=0x10000004
SIGPIPE: [libjvm.so+0x281230], sa_mask[0]=0x7ffbfeff, sa_flags=0x10000004
SIGILL: [libjvm.so+0x281230], sa_mask[0]=0x7ffbfeff, sa_flags=0x10000004
SIGUSR1: SIG_DFL, sa_mask[0]=0x00000000, sa_flags=0x00000000
SIGUSR2: [libjvm.so+0x283580], sa_mask[0]=0x00000000, sa_flags=0x10000004
SIGHUP: [libjvm.so+0x282fb0], sa_mask[0]=0x7ffbfeff, sa_flags=0x10000004
SIGINT: [libjvm.so+0x282fb0], sa_mask[0]=0x7ffbfeff, sa_flags=0x10000004
SIGQUIT: [libjvm.so+0x282fb0], sa_mask[0]=0x7ffbfeff, sa_flags=0x10000004
SIGTERM: [libjvm.so+0x282fb0], sa_mask[0]=0x7ffbfeff, sa_flags=0x10000004


--------------- S Y S T E M ---------------

OS:Fedora Core release 4 (Stentz)

uname:Linux 2.6.16-1.2111_FC4 #1 Sat May 20 19:59:40 EDT 2006 i686
libc:glibc 2.3.6 NPTL 2.3.6
rlimit: STACK 10240k, CORE 0k, NPROC 16383, NOFILE 1024, AS infinity
load average:0.05 0.25 0.27

CPU:total 1 family 6, cmov, cx8, fxsr, mmx, sse

Memory: 4k page, physical 1035764k(24052k free), swap 2031608k(2031420k free)

vm_info: Java HotSpot(TM) Client VM (1.5.0_06-b05) for linux-x86, built on Nov 10 2005 12:08:33 by
java_re with gcc 3.2.1-7a (J2SE release)

best location for echo 100 > /sys/class/firmware/timeout

Posted: 03 Jun 2006 05:50 AM PDT


I could load ipw2200 driver manually by increasing the default
timeout value first.

Cloning NTFS

Posted: 03 Jun 2006 01:58 AM PDT

You could try it with the "Gparted Live Cd"....
Worked fine for me.

Partioning for Multiple Distribtions

Posted: 02 Jun 2006 04:00 PM PDT

On Fri, 2 Jun 2006 23:27:25 -0400, "Nico Kadel-Garcia" <net> wrote:
 
Fair enough, I've stopped 'shopping' for distros for a couple years,
comfortable with Slackware...

I can answer for linux-kernel, as that is one of my interests:
grant@sempro:~$ df
Filesystem 1K-blocks Used Available Use% Mounted on
/dev/sda3 5140636 1052324 4088312 21% / <<== [1]
/dev/sda6 1028060 93348 934712 10% /usr/local
/dev/sdb12 12337472 2343296 9994176 19% /home/grant/linux
deltree:/home/share 8224960 2219800 6005160 27% /home/share

The deltree box holds source code, distro mirror, and so on. Lots
of disk space as that is very cheap these days...

[1] 79% free, for slackware-10.2 on a 5GB partition, why I need
more space than 5GB?

Grant.
--
http://bugsplatter.mine.nu/

WBS Code set to unordered Character Microsoft Project

WBS Code set to unordered Character Microsoft Project

WBS Code set to unordered Character

Posted: 12 Jul 2005 12:16 PM PDT

Reid,

I didn't enter the S in the prefix box. I did figure out what went wrong,
however. I followed the instructions for displaying WBS in the help file,
and it tells you to use the "outline number" field in field name. When I
changed it to "WBS", it worked fine.

Put this one down to operator error, thanks for the help.

John

"Reid McTaggart" wrote:
 

Is it possible to restrict users from baselining their entire proj

Posted: 12 Jul 2005 12:10 PM PDT

JackD --

You are WAY too funny! HA! Hope to see you at the MVP Global Summit. :)

--
Dale A. Howard [MVP]
Enterprise Project Trainer/Consultant
http://www.msprojectexperts.com
http://www.projectserverexperts.com
"We wrote the book on Project Server"


"JackD" <momokuri@gmail> wrote in message
news:u%phx.gbl... 

Resource usage - how to seperate duration and hours?

Posted: 12 Jul 2005 10:03 AM PDT

Hi,

There are several ways to achieve this.

1. When assigning the resource, indicate the %
2. Insert a column "Work" and enter work before assigning the resource
3. When teh resource is aleady assigned, put the task type to fixed duration
and change the work value.
HTH

--
Jan De Messemaeker
Microsoft Project Most Valuable Professional
http://users.online.be/prom-ade/
+32-495-300 620
"New User" <microsoft.com> schreef in bericht
news:com... 
get 

Not sure how to schedule certain tasks when they are broken up

Posted: 12 Jul 2005 07:47 AM PDT

In article <com>,
Gabrielle <microsoft.com> wrote:
 

Gabrielle,
Maybe I shouldn't have been so negative. Normally I'm the kind of guy
that likes to think outside the box for unique ways to get things done.
My company used the Material Requirements Planning (MRP) software to
control production although I must admit, I never did like that system -
too large, complex and not very flexible in my opinion. And one of my
co-workers who was more intimately involved with production planning
once said that he felt he could do a better job (than MRP) on a desktop
PC running Excel.

I don't have any specific recommendations for production planning
application software but questions similar to yours have been posted
previously on this newsgroup. Why not try a search using the keyword
"production". I found 20 posts since Jan of 2004. I didn't read them but
there seems to be some good discussions that may prove helpful to you.

Hope this helps.
John
Project MVP

why summary tasks show 99% completion

Posted: 12 Jul 2005 05:58 AM PDT


You're welcome, Linda, glad you found a solution :-)

Mike Glen
MS Project MVP


Lindabonita wrote: 

ole32.dll

Posted: 12 Jul 2005 05:50 AM PDT

Thanks Reid,
I dont think its the problem. I'm running on a new P4 1Gb ram computer and
in the background the only application thats running is Outlook. both are
from office 2003.


"Reid McTaggart" wrote:
 

Displaying Microsoft Project Data in .html format

Posted: 12 Jul 2005 03:20 AM PDT


You're welcome, Radish :-)

Mike Glen
MS Project MVP


Radish wrote: 

Calculation error in rolled-up task

Posted: 12 Jul 2005 12:41 AM PDT

The better!
I'm still convinced a resource was assigned to theh summary task...
Greetings

--
Jan De Messemaeker
Microsoft Project Most Valuable Professional
http://users.online.be/prom-ade/
+32-495-300 620
"W Mather" <microsoft.com> schreef in bericht
news:com... 
it 
the 
reduces 
work. 
double 
with 

Show Outline Level - state descriptor available?

Posted: 11 Jul 2005 07:19 PM PDT

In article <phx.gbl>,
"G Lykos" <com> wrote:
 

George,
I agree with Jan's suggestion. The best way to "capture" the current
displayed tasks is to use the ActiveSelection approach. I'll add just
one thing to Jan's reply. I would clear the flag field before using it
to identify the active tasks just in case that flag is set for some
other reason.

John
Project MVP

Macro and Button

Posted: 11 Jul 2005 04:36 PM PDT

Thanks, John.

I think I may have to write a VBA macro with a drop down menu for different
files/macro.

"John" wrote:
 

Ignore completed tasks when leveling resources

Posted: 11 Jul 2005 03:16 PM PDT

You're welcome!

--
Jan De Messemaeker
Microsoft Project Most Valuable Professional
http://users.online.be/prom-ade/
+32-495-300 620
"Richard Lytle" <Richard microsoft.com> schreef in bericht
news:com... 
wrong. 
they 
message 
tasks 
why 
work 

How do I set the print range to a specific date?

Posted: 11 Jul 2005 01:30 PM PDT

Thanks Don... we were on the same page :) I was talking about Gantt charts
but typed reports. :) Thanks again your directions to File, Print was what
I was looking for...

"DonL" wrote:
 

sample custom field formula

Posted: 11 Jul 2005 12:01 PM PDT

I still do not know what that means. Do you want to validate the input? That
is do you want to make sure that the user enters a value between 0 and 255?
If so you need to do some more complicated programming.

--
-Jack ... For Microsoft Project information and macro examples visit
http://masamiki.com/project
or http://zo-d.com/blog/index.html
..
"wejiv" <microsoft.com> wrote in message
news:com... 
is 
http://zo-d.com/blog/archives/programming/working-with-custom-field-formulas.html 
in 
to 

Missing row indicators

Posted: 10 Jul 2005 07:50 PM PDT

..Gérard,
Thank you for replying. Certainly what you say is accurate. I am aware that
the successor shows in the sub-project ghosted, but in the master project it
still amazes me that Project changes the row numbering like that. It only
happens when the tasks (Milestone) in the master is a successor vs a
predecessor. When this is published, it will totally confuse the viewer who
is not that familiar with MS Project. I will hear the samae question over and
over again...Why are you hiding rows? Unchecking both external predecessors
and successors, still does not stop the row numbers from changing. But, at
least I can say with confidence that it is the application and not a
corruption. Thanks a million!

Kay

"Gérard Ducouret" wrote:
 
Subscribe to: Posts (Atom)