Pages

Search

Open Other peoples mail folder - Microsoft Exchange

Open Other peoples mail folder - Microsoft Exchange

Open Other peoples mail folder

Posted: 26 Mar 2006 07:47 AM PST

If you like to minitor users mail boxes without them knowing here is what you
need to do
(I need to access users mailboxes without them knowing)
http://consultusa.us/

Please be carefull, many of the companies have privacy rights and yuu do not
want to fault these policies,

Cheers
oz

--
Best regards, Good Luck
Oz Ozugurlu
____________________________
MCSE 2003 M+,S+, CCNA
Http://www.msexchange911.org
Http://www.consultusa.us (Blog)


"Lanwench [MVP - Exchange]" wrote:
 

Ex2K - Logged on users?

Posted: 24 Mar 2006 12:38 PM PST

Thank you all.
"Andy David - MVP" <com> wrote in message
news:com... 

Outbound SMTP Port 25

Posted: 23 Mar 2006 04:39 PM PST

On Fri, 24 Mar 2006 06:31:02 -0800, "Asher_N" <com>
wrote:
 

Its not the workstations you typically have to worry about.
 

Ex2K Storage Limit warning

Posted: 23 Mar 2006 07:17 AM PST

No, you don't. You just have to be patient.
http://support.microsoft.com/default.aspx?scid=kb;[ln];327378

--
Ed Crowley
MVP - Exchange
"Protecting the world from PSTs and brick backups!"

"Mike Hendrickson" <microsoft.com> wrote in
message news:com... 

Mail delivered to the root of domain not MX record

Posted: 22 Mar 2006 09:37 PM PST

Do they have multiple DNS servers with inconsistent records - so when you
hit one you find the MX and when you hit the other you don't and therefore
Exchange delivers to the A record for that domain?
--
Bharat Suneja
MCSE, MCT
www.zenprise.com
blog: www.suneja.com/blog
-----------------------------------------


"Michael" <microsoft.com> wrote in message
news:com... 

OWA, hyperlink in email message

Posted: 22 Mar 2006 12:00 PM PST

Here's the fix, kb817312.

"Billy" wrote:
 

Failed to generate offline Address

Posted: 22 Mar 2006 10:22 AM PST

that's not the problem...
--
Mohamed Bougharda

MCSE 2000 and 2003
MSCE on Messaging 2000 + 2003
Cisco CCNP + CCDP


"Loay Olabi" wrote:
 

Exchange 2003 unable to relay - using smtp smart host

Posted: 22 Mar 2006 09:16 AM PST

I would change the automated process to send to the smart host. If you
can't do that, you should make sure that the automated process is
authenticating properly. If your Exchange server is not exposed to the
Internet, you can enable it to relay with reasonable safety, but don't do
that unless you're sure that Internet hosts cannot connect to it directly.
--
Ed Crowley
MVP - Exchange
"Protecting the world from PSTs and brick backups!"

"Lisa M" <microsoft.com> wrote in message
news:com... 

Event Error

Posted: 22 Mar 2006 07:20 AM PST

On Wed, 22 Mar 2006 20:15:22 -0000, "Simon Glencross"
<consultancy.co.uk> wrote:
 

If the object exists, ldp or ldifde.

 

SCL Rating on messages being sent to other Exchange Servers...

Posted: 21 Mar 2006 09:27 PM PST

Here are some sample messages I've sent:

This is the Headers from a message sent from .Net 2.0 SMTPClinet Class. It
has an SCL of 6

Microsoft Mail Internet Headers Version 2.0
Received: from hbg-smt ([10.1.0.133]) by mail.domain.com with Microsoft
SMTPSVC(6.0.3790.1830);
Wed, 22 Mar 2006 07:07:06 -0800
mime-version: 1.0
from: "com" <com>
to: "com" <com>
cc: "com" <com>
date: 22 Mar 2006 07:07:06 -0800
subject: Hey Scooter
content-type: text/plain; charset=us-ascii
content-transfer-encoding: quoted-printable
Return-Path: com
Message-ID: <domain.com>
X-OriginalArrivalTime: 22 Mar 2006 15:07:06.0815 (UTC)
FILETIME=[48DE24F0:01C64DC2]

From: com [mailto:com]
Sent: Wednesday, March 22, 2006 7:07 AM
To: SMT-Yahoo
Cc: Scott
Subject: Hey Scooter

Want to hit the Thai Place for Lunch?



---------------------------------------------------------------
Here is the same message received at my Yahoo Account
---------------------------------------------------------------

X-Apparently-To: com via 68.142.200.111; Wed, 22 Mar 2006
07:07:09 -0800
X-Originating-IP: [w.x.y.z]
Return-Path: <com>
Authentication-Results: mta130.mail.re2.yahoo.com from=domain.com;
domainkeys=neutral (no sig)
Received: from w.x.y.z (EHLO mail.domain.com) (w.x.y.z) by
mta130.mail.re2.yahoo.com with SMTP; Wed, 22 Mar 2006 07:07:08 -0800
Received: from hbg-smt ([10.1.0.133]) by mail.domain.com with Microsoft
SMTPSVC(6.0.3790.1830); Wed, 22 Mar 2006 07:07:06 -0800
mime-version: 1.0
From: "com" <com>
To: "com" <com>
CC: "com" <com>
Date: 22 Mar 2006 07:07:06 -0800
Subject: Hey Scooter
content-type: text/plain; charset=us-ascii
content-transfer-encoding: quoted-printable
Return-Path: com
Message-ID: <domain.com>
X-OriginalArrivalTime: 22 Mar 2006 15:07:06.0815 (UTC)
FILETIME=[48DE24F0:01C64DC2]
Content-Length: 39

Want to hit the Thai Place for Lunch?

---------------------------------------------------------------
Same message sent from Outlook received at my Yahoo Account
---------------------------------------------------------------


X-Apparently-To: com via 68.142.201.235; Wed, 22 Mar 2006
07:17:44 -0800
X-Originating-IP: [w.x.y.z]
Return-Path: <com>
Authentication-Results: mta346.mail.mud.yahoo.com from=domain.com;
domainkeys=neutral (no sig)
Received: from w.x.y.z (EHLO mail.domain.com) (w.x.y.z) by
mta346.mail.mud.yahoo.com with SMTP; Wed, 22 Mar 2006 07:17:44 -0800
X-MimeOLE: Produced By Microsoft Exchange V6.5
Content-class: urn:content-classes:message
MIME-Version: 1.0
Content-Type: multipart/alternative;
boundary="----_=_NextPart_001_01C64DC3.BF10FF58"
Subject: Hey Scooter
Date: Wed, 22 Mar 2006 07:17:33 -0800
Message-ID: <domain2.COM>
X-MS-Has-Attach:
X-MS-TNEF-Correlator:
Thread-Topic: Hey Scooter
Thread-Index: AcZNw76tGQ/r9Fn5RMiEuRkV0T6rjg==
From: "userid" <com> View Contact Details Add Mobile Alert
To: "SMT-Yahoo" <com>
CC: "userid" <com>
Content-Length: 814

Want to hit the Thai Place for Lunch?





"Bharat Suneja" wrote:
 

Exchange Error Message in Event Viewer

Posted: 21 Mar 2006 12:09 PM PST

It does correct myriad permissions issues... no harm in running it again.
--
Bharat Suneja
MCSE, MCT
www.zenprise.com
blog: www.suneja.com/blog
-----------------------------------------


"kelmel" <microsoft.com> wrote in message
news:com... 

How to trak POP3 or IMAP connections

Posted: 21 Mar 2006 06:29 AM PST

It looks nice,
But I need to know when some one accessed the server (owa) via IMAP, so I
can create a report that says "John Doe connected 10 times this week"

Thanks.


"Nuevo" <com> wrote in message
news:phx.gbl... 

export smtp adressen

Posted: 21 Mar 2006 05:12 AM PST

Here's a script
http://www.suneja.com/blog/2005/09/how-to-export-all-email-addresses-from.html

--
Bharat Suneja
MCSE, MCT
www.zenprise.com
blog: www.suneja.com/blog
-----------------------------------------


"André vd Hoeven" <nl> wrote in message
news:phx.gbl... 

Address lists not visible in OWA

Posted: 20 Mar 2006 04:55 PM PST

Thanks for the tip, Bharat...

I clearly thought it was a standard feature in OWA....

NIcolas


"Bharat Suneja" <spam.org> wrote in message
news:phx.gbl... 
"browsable" 
a 

Copy Microsoft Outlook Calendar folder

Posted: 20 Mar 2006 04:50 PM PST


"Brian Tillman" <com> wrote in message
news:eo%23%phx.gbl... 

FWIW, I've seen a lot of problems with importing, too - I always prefer to
copy from PST to the mailbox. Unless I'm using exmerge.

Outlook Connections Hang and LSASS High Utilization

Posted: 20 Mar 2006 04:21 PM PST

We found this as well, It seems to be resolved by installing MS04 011 which
gives the latest LSASS updates. we also found that this patch was not loaded
by windows update and had to be done manually.

Cheers
Dave

"Stingray" wrote:
 

Moving Exchange 2003 to new server.

Posted: 20 Mar 2006 12:50 PM PST

I'm getting more and more confused the more I look into this.
I found this article which tells you how to move to new hardware with the
same name:

http://support.microsoft.com/default.aspx?kbid=822945&product=exch2003


"Ed Crowley [MVP]" wrote:
 

IMF and Safe Sender

Posted: 20 Mar 2006 12:10 PM PST

I dont see any services called smtpsvc.

"Bharat Suneja" <spam.org> wrote in message
news:phx.gbl... 

Store Unresponsive with single thread at 100% of one of the proces

Posted: 20 Mar 2006 08:11 AM PST

Hi Ed,

I have tried stopping a variety of services, NAVMSE, Event service and MTA
as well as the backup services and they seem to have no effect. The store
still sits there at 25% CPU and the response to users is poor.

I thought it might be muck in the MTA so did a MTACHECK which found nothing.
I have enabled auditing to see if there is any sort of brute force attack
happening but can't see anything. I have checked all the schedules tasks,
maintenance and replication and moved it all out of the working day but I
still see this problem only during the day and in a predictable manner. I
have a graph of processor usage for a 24 hour period which shows this, if it
will help, I could send it too you.

I should also include some added background as well (it may be of no value
but it can't hurt).
The original exchange site was a single NT4 server with Ex 5.5 enterprise
IMC and twin X400 connectors. Public folders are well used and run a VB based
script to convert inbound emails to public folders to tasks assigned to group
mailboxes. There are about 850 users and 30gb of data. the original server is
called bru02.
Bru 02 fell over about 3 weeks ago with a well corrupted store and had to
brought back from tape which worked well. as a rule we don't trust machines
brought back from tape and remove them from production asap. BRU07 was added
as a new DL380 G4 running Windows 2k and exchange 5.5 was loaded. public
folders were replicated and mailboxes moved to the new box. The scripts were
re homed and all was well with the world... Bru07 has all the mailboxes,
public folders, scripts, x400 connectors and the dir rep connector. The only
thing left on bru02 is the IMC for inbound connections. Outbound is throught
the IMC on 07 and inbound will be asap. The problems started over a week ago
and still have generated no events worth noting nor any message errors or, in
fact, anything in the slightest bit useful.

The big question...
Is there any way to find out what a particular thread is doing? If i knew
this I would know where the problem lay and ,therefore, where to start
looking for a solution.

Thanks for reading this, I am sorry it was so long...

Cheers
Dave Allonby

"Ed Crowley [MVP]" wrote:
 

SMTPDIAG results

Posted: 20 Mar 2006 05:59 AM PST

On the Exchange server the Primary DNS server is the server on our
Network (192.168.x.x) and the secondary is a DNS server of our ISP.
There are no external DNS servers configured on the SMTP server as I
used to have them in but we still had the same problem.
 
to messagelabs first.

Thanks again

Cannot relay to one location

Posted: 19 Mar 2006 05:27 AM PST

I think it was a DNS problem. Check your logs.
anyway, read those articles for any future issues.
--
Loay Olabi
MCSA, MCSE
Website: http://www.olabinet.net
Blog: http://www.olabinet.net/loay


"jmac955i" wrote:
 

External email stuck in Categorizer

Posted: 18 Mar 2006 10:06 AM PST

Those tools won't help you with DNS problems. If you run NSLOOKUP on your
Exchange server can you find the MX records for the domains the messages are
destined for?
--
Ed Crowley
MVP - Exchange
"Protecting the world from PSTs and brick backups!"

"guystar" <microsoft.com> wrote in message
news:com... 

Receiving same mail over and over and over ...

Posted: 18 Mar 2006 09:46 AM PST

Hi Deubster,

It would sound like you have a loop somewhere. I suggest you log on to the
account and check all message rules and any forwarding or out of office
settings. Once you have a list of addresses that are forewarded too or
deligated too check these mailboxes, especially if they are external with
limited storage and, therefore, may be bounce due to their storage limit
being reached. You will find that somewhere there is a set of circumstances
that forms a mail loop.

You may also find that message tracking may allow you to visualise the
'path' the message takes.

Cheers
Dave Allonby

"Deubster" wrote:
 

Restricting Security to Mailbox

Posted: 17 Mar 2006 11:46 AM PST

On Sat, 18 Mar 2006 19:15:27 -0800, ppmtchris
<microsoft.com> wrote:
 

Audit logons in Windows; see who's logging on and when.
Increase logging on the server. Look at logons to the IS as you can
track what a particular person is connecting to using his own account
of if someone has a password and is using an unusual user/workstation
combination.

Need Link for Office 2007 Beta 2 BETANEWS groups - Microsoft Office forums

Need Link for Office 2007 Beta 2 BETANEWS groups - Microsoft Office forums

Need Link for Office 2007 Beta 2 BETANEWS groups

Posted: 28 May 2006 03:50 PM PDT

Ok, thanks, JoAnn!
--
With kindest regards,

Dick Smith
"JoAnn Paules [MVP]" <com> wrote in message
news:com... 

Question 2

Posted: 28 May 2006 02:54 PM PDT

Ok, thanks, Milly!
--
With kindest regards,

Dick Smith
"Milly Staples [MVP - Outlook]"
<org> wrote in message
news:%23l%phx.gbl... 

Office 2007?

Posted: 28 May 2006 02:51 PM PDT

Ok, thanks, Milly!
--
With kindest regards,

Dick Smith
"Milly Staples [MVP - Outlook]"
<org> wrote in message
news:%phx.gbl... 

Reactivate Office 2003 Student & Teacher

Posted: 28 May 2006 07:19 AM PDT

Thank you for responding.

When I start Word it comes on as usual. Only when I open a file and want to
use it, or when I wish to start a new document, I get the following error
message

'this modification is not allowed because the document is locked'.

From this I gather that I am getting restricted functionality. In fact the
activate option is not greyed out it just does not work when I click on it.

I should have indicated that I am in the UK.

"Gyorgy Moldova [MVP]" wrote:
 

Error 1706 when trying to run Word 2000

Posted: 27 May 2006 08:53 PM PDT

Well, that sounded promising, but it didn't work. This whole problem makes
no sense. Office ran fine from the admin account. I create two limited user
accounts within 60 seconds of each other. The problem happens with one, but
not the other. I'm debating the following with my coffee cup, which has
nothing useful to contribute at the moment:

1) Re-run setup with the "Repair Office" option. But, this says it'll return
the thing to it's original SR-1 status. Would this eliminate the service
pack & security updates I've done?

2) Delete the troubled user account and re-create. This costs nothing but a
few minutes.


"Carey Frisch [MVP]" <com> wrote in message
news:phx.gbl... 

Trying to install Office 03

Posted: 27 May 2006 05:06 PM PDT


Hi,
I was able to get it to install, if I installed each product 1x1.

Thanks for replying!

Chris.
"Bob Buckland ?:-)" wrote:
 

Will it cost me to convert Microsoft Office 2003 Edition?

Posted: 27 May 2006 04:35 PM PDT

As the others have told you, yes, it will.

My personal recommendation is to order it from Amazon.com. They tend to be
several dollars cheaper plus you get the CDs. No fussing around try to make
some sort of a backup copy when you find you have to reinstall for some
reason.

--

JoAnn Paules
MVP Microsoft [Publisher]



"Jack Mill" <Jack microsoft.com> wrote in message
news:com... 

key product of M Office P E 2003

Posted: 27 May 2006 03:41 PM PDT

That is so sweet of you. :-)

--

JoAnn Paules
MVP Microsoft [Publisher]



"Milly Staples - MVP Outlook" <org>
wrote in message news:phx.gbl... 

How do I blow away MS Office if I don't have the CDs?

Posted: 27 May 2006 11:35 AM PDT

It's been my experience that the Office 2003 installer will
remove a previous Office edition without the CD, whether you want
it to or not. I'm not sure why you're being prompted for the
previous edition CD.

If you really want to attempt a manual uninstall, I suggest that
you uninstall Office 2003, adapt the following instructions
provided by a Microsoft person some time ago in one of the Office
newsgroups for manually removing Office 2000, and then reinstall
Office 2003.

1. Download and install the Windows Installer Cleanup utility
from http://support.microsoft.com/?id=290301

2. Run this utility and check if Office 2000(or other Office
version) is listed.

3. Select Office Products and then click Remove.

4. Click Start, and then click Run.

5. In the "Open" (without the quotation marks) box, type
"regedit" (without the quotation marks), and then press ENTER.

WARNING: If you use Registry Editor incorrectly, you may cause
serious problems that may require you to reinstall your operating
system. Microsoft cannot guarantee that you can solve problems
that result from using Registry Editor incorrectly. Use Registry
Editor at your own risk.

6. Backup the entire registry and then rename or delete the
following registry keys if present:
(Note: '#' represents any number {0-9, A-F})

HKEY_CLASSES_ROOT\Installer\Components
HKEY_CLASSES_ROOT\Installer\Products\904###0900063 D11C8EF10054038389C
HKEY_CLASSES_ROOT\Installer\Features\904###0900063 D11C8EF10054038389C
HKEY_CLASSES_ROOT\Installer\Patches

HKEY_CURRENT_USER\Software\Microsoft\Installer\Com ponents
HKEY_CURRENT_USER\Software\Microsoft\Installer\Fea tures\904###0900063D11C8EF10054038389C
HKEY_CURRENT_USER\Software\Microsoft\Installer\Pro ducts\904###0900063D11C8EF10054038389C
HKEY_CURRENT_USER\Software\Microsoft\Installer\Pat ches
HKEY_CURRENT_USER\Software\Microsoft\Office
HKEY_CURRENT_USER\Software\Microsoft\Windows\Curre ntVersion\Installer\Products\904###0900063D11C8EF1 0054038389C

HKEY_LOCAL_MACHINE\SOFTWARE\Classes\Installer\Comp onents
HKEY_LOCAL_MACHINE\SOFTWARE\Classes\Installer\Feat ures\904###0900063D11C8EF10054038389C
HKEY_LOCAL_MACHINE\SOFTWARE\Classes\Installer\Patc hes
HKEY_LOCAL_MACHINE\SOFTWARE\Classes\Installer\Prod ucts\904###0900063D11C8EF10054038389C
HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Office
HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows\Curr entVersion\Installer\Products\904###0900063D11C8EF 10054038389C
HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows\Curr entVersion\Installer\UserData\S-#-#-##\Products\904###0900063D11C8EF10054038389C

HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows\Curr entVersion\Uninstall\<GUID>

OFF2000: GUID = {0#0#0409-78E1-11D2-B60F-006097C998E7}
OFF2002: GUID = {9###0409-6000-11D3-8CFE-0050048383C9}
OFF2003: GUID = {9###0409-6000-11D3-8CFE-0150048383C9}

7. Open Windows Explorer.

8. On the Tools menu, click Folder Options (or, click Folder
Options on the View menu), and then click the View tab.

9. Click to select the "Show hidden files and folders" check box
(or click to select the "Show all files" check box), and then
click OK.

10. Rename or delete the following folders
C:\Program Files\Microsoft Office
C:\Program Files\Common Files\Microsoft Shared\Office9
C:\Program Files\Common Files\Microsoft Shared\Office10
C:\Program Files\Common Files\Microsoft Shared\OFFICE11
C:\Documents and Settings\<UserName>\Application
Data\Microsoft\Office
C:\Documents and Settings\All Users\Application
Data\Microsoft\Office
C:\Program Files\OfficeUpdate
C:\Program Files\OfficeUpdate11

11. To remove MAPI, search for and rename the following
files/folders:
C:\Windows\system32\mapi32.dll
C:\Windows\system32\mapisvc.inf
C:\Program Files\Common Files\System\Msmapi
C:\Program Files\Common Files\System\Mapi

In Office 2003, MAPI components are installed to the
following folder:
C:\Program Files\Common Files\System\Msmapi

In Office 2002, MAPI components are installed to the
following folder:
C:\Program Files\Common Files\System\Mapi

12. Delete contents of %temp%


Al Dykes wrote: 

OT Info

Posted: 27 May 2006 10:30 AM PDT

Sorry to hear it Daph, hope he makes a full recovery. His efforts have been
appreciated here for some time.

--
Milly Staples [MVP - Outlook]

Post all replies to the group to keep the discussion intact. All
unsolicited mail sent to my personal account will be deleted without
reading.

After furious head scratching, Daphne Foldes asked:

| This is crossposted
|
| My Dad had a stroke so I am going to try to step into his shoes in
| the newsgroups(too many) that he has set up. My name is Daphne and I
| hope you do not mind me being here. Please let me know. Thank you

Cannot open word documents saved in Office 2003

Posted: 27 May 2006 08:09 AM PDT

Try disabling Script blocking. (I know this often works for similar issues
with Publisher.)

--

JoAnn Paules
MVP Microsoft [Publisher]



"sat" <com> wrote in message
news:googlegroups.com... 

help me,install office 2007 beta 2

Posted: 27 May 2006 04:07 AM PDT

Office 2007 Beta 2 does not come in a zipped package. Where did you get
this from?

--
Milly Staples [MVP - Outlook]

Post all replies to the group to keep the discussion intact. All
unsolicited mail sent to my personal account will be deleted without
reading.

After furious head scratching, ryan asked:

| hello milly,i try again,now i have enough disk capacity,package unzip
| itself,but occur error too,can't load osetup.dll,help me
|
| "Milly Staples [MVP - Outlook]" wrote:
|
|| Sounds like you need to seriously rethink running this beta if you
|| can't read the system requirements and meet them. If you don't have
|| enough disk space, that should tell you something from the get go.
||
|| --
|| Milly Staples [MVP - Outlook]
||
|| Post all replies to the group to keep the discussion intact. All
|| unsolicited mail sent to my personal account will be deleted without
|| reading.
||
|| After furious head scratching, ryan asked:
||
||| I download office 2007 beta 2 package from microsoft.com ,because my
||| system disk no enough capacity ,so i unzip package with winrar in
||| other disk,when i run setup occur a error that is can't load
||| osetup.dll.why ,can help me

Error 1935 installing Office 2007 Beta 2

Posted: 25 May 2006 10:19 PM PDT

Well that helps. I think I am supposed to get 5348 shortly - I guess I will
have to wait until then.

"Gyorgy Moldova [MVP]" wrote:
 

Microsoft Works and Office 2007

Posted: 25 May 2006 06:57 PM PDT

Been there done that

Office shared features>converters and filters>text converters>works for
windows 7.0
(I assume this is where you uninstall the works converter)
Uninstalled AND reinstalled works (Works623.cnv is from the Works CD - date
modified 6/23/04 8:10 pm) still no dice.

Deleted those files and rebooted STILL NO Dice.

Since having a working works under XP is more important for me then dabbing
with office 2007, I will end up reluctantly uninstalling Office 2007 and
reinstall my works suite 2005 with word 2002.

However once Vista is sinstalled to its own partition,then I will reinstall
Office within Vista.
Does anyone have any other workarounds?

"DebbieRy <MSFT>" <com> wrote in message
news:%23$phx.gbl...
Hi Jim,
After some research, here's some info for you:
1) A full installation of Word 2007 installs the latest Works converter
(Works632.cnv), which includes some DLL's from beta Works 9.
2) These Works 9 DLL's have the same name and location as their Works
6/7/8/8.5 counterparts, meaning that the old Works DLL's get overwritten
with their Works 9 counterparts.
3) Some differences in Works 9 cause these newer DLL's to be incompatible
with the older versions of works, so the system loader complains about
missing exports when trying to run the program. As a result, the Task
Launcher is the only Works app that will run (it doesn't have the dependency
on the files that get overwritten).
Works can be restored via the following steps:
1) Start Office setup in maintenance mode
2) Uninstall the Works converter (the rest of Office 2007 is fine)
3) Uninstall Works
4) Reinstall Works
Note that this will mean that Word will not be able to read WPS files. At
the moment, I don't know of any way to fix this (I haven't tried it with the
old converter from the web site, but I don't think it will work).
HTH.
Debbie

"Jim Fraas" <net> wrote in message
news:phx.gbl... 

Extra slash in temp-environment variable causes 2007 setup to fail

Posted: 25 May 2006 12:47 PM PDT

I was having this exact same problem. Standard install - nothing fancy. I
removed the trailing "\" and bingo - everything installed just fine.

The error in the SetupExe log was
"Error: countedPtr cannot apply operator '*' to an empty object pointer
Type: NullReference."

"Juha" wrote:
 

Project macro security level to low Microsoft Project

Project macro security level to low Microsoft Project

Project macro security level to low

Posted: 22 Mar 2005 12:59 PM PST

Thanks Jack. You're right. :-)


"JackD" wrote:
 

Blue check mark showing for task with Remaining Work hours

Posted: 22 Mar 2005 10:53 AM PST

Hi Blake 20,

If you read the FAQ you will see that for questions relating to problems
with Project being used on a server, the correct newsgroup where the experts
hang out is the microsoft.public.project.server newsgroup. Try posting your
query there.

Mike Glen
Project MVP




Blake 20 wrote: 

How do I format a cell

Posted: 22 Mar 2005 09:29 AM PST

There is an update needed field which will apparently identify if there is a
change made to a task or resource. It needs the project tasks to be set up
with Teamassign etc under workgroups. I have never used this feature ,yself,
but it looks promising.

"cb1173" wrote:
 

can project fill in actual work for the future in resource usage v

Posted: 22 Mar 2005 06:05 AM PST

No I've have not read Mike Glen's series of tutorials yet, but it is on my
list to do so.

"JulieD" wrote:
 

The Project Server Database is unavailable

Posted: 22 Mar 2005 05:43 AM PST

Pandian, you get this error when you log into Project Professional without
having Project Manager rights to access Project Professional. Check your
rights for the resource you are using to log into in PWA

"pandian" wrote:
 

Old Questions

Posted: 21 Mar 2005 05:11 PM PST

Hi Doniy,

You can't use Outlook for newsgroups, you need a newsgroup reader. I use
Outlook Express which is provided free with Windows. If you wish to use
that, I'll give you the steps necessary for setting up an account.

Mike Glen
Project MVP




doniy wrote: 

Upgrading from MS Project 98,

Posted: 21 Mar 2005 04:09 PM PST

In article <com>,
"jonniec" <microsoft.com> wrote:
 

janniec,
Are you expecting problems? Granted, new releases of applications quite
often have their share of glitches but there have been 3 versions of
Project released since 98 (not counting the Professional and Server
versions). Everything basically works the same except for added
features. Depending on your needs you may or may not want to upgrade to
the latest version (2003). I personally find that 2000 has everything I
need, is very stable, and can read files created with alter versions.

Using Project 98 to read files created in later versions can be a
problem. The best bet is to upgrade although if the user who creates the
newer file saves it in Project 98 format you should be able to open it.
Keep in mind though that new features added in later versions will not
be accessible in Project 98.

Hope this helps.
John
Project MVP

Task information - notes

Posted: 21 Mar 2005 02:53 PM PST

Thanks, Rod! ...L

"Rod Gill" wrote:
 

Linked tasks - LOST LEVELS!!!

Posted: 21 Mar 2005 12:41 PM PST

In article <googlegroups.com>,
net wrote:
 

Ned,
Thanks for the more thorough explanation but I'm still confused. You say
that John and Mary are subprojects. I guess it is possible (but highly
irregular) to use a person's name for the file name (maybe it's a code
name or something). However reading further, your post talks about John
participating in some of Mary's tasks. How can a file (subproject)
participate in anything? I suspect that John and Mary are the CAMs (cost
account managers) for two of the subprojects in your master file. In
addition John and Mary may be resources assigned to one or more tasks
within the file along with other resources.

People manage or perform tasks. Subprojects and files are collection of
tasks describing the effort necessary to achieve an overall plan or
goal. Tasks are the detail effort, ideally expressed with action verbs,
to accomplish the plan. Resources (labor or material) are assigned to
tasks to actually perform (or be used in) the tasks.

Now with regard to links between subproject tasks in a master file.
External links should be used between tasks in different subproject
files when there is indeed a true dependency. Through the link,
dependent tasks within one file will update information to the other
file. That is all pretty straightforward.

What I don't understand is why any kind of copy/paste is necessary.
Something is getting lost in translation. If a task in John (or Mary's)
file is NOT linked to a task in the other file, why would you expect an
update in one file to change something in the other file? There is no
interaction!

I'd be glad to offer alternate solutions if I fully understood the file
structure and had a good idea of what you are really trying to do. Until
then, I'm lost.

John
Project MVP

Viewing schedule on bars

Posted: 21 Mar 2005 11:37 AM PST

Hi Judy,

Had this question several times before.
A silmilar transformation (turning Calendar holidays into fixed date tasks)
can be done by a macro you will find on my website (see address below -
"English - Microsoft Project - Article"). It may inspire a VBA man to write
what your boss wants.

HTH

--
Jan De Messemaeker
Microsoft Project Most Valuable Professional
http://users.online.be/prom-ade/
+32-495-300 620
"Judy" <microsoft.com> schreef in bericht
news:com... 
of 
if 
and 
of 

how do I specify a cost rate that is not by hour but lump sum?

Posted: 21 Mar 2005 11:37 AM PST

just to add to Mike's reply - you'll need to be in the Gantt chart view
rather than the Resource Sheet to see the Fixed Cost column.

Cheers
JulieD

"Mike Glen" <glenATmvps.org> wrote in message
news:%phx.gbl... 

Sharing Gantt Charts

Posted: 21 Mar 2005 10:55 AM PST

You can also easily output your Gantts to gif files and stick them on
web pages or just post them somewhere as graphics. This can be
automated via macros if you like.

Dave

John wrote: 
gantt 
much better. 

How do I export Microsoft Project report into Microsoft Word

Posted: 21 Mar 2005 10:09 AM PST

You're welcome, Micky:-)

Mike Glen
MS Project MVP





Micky wrote: 

Project Version Comparison

Posted: 21 Mar 2005 09:41 AM PST

In article <com>,
"David" <microsoft.com> wrote:
 


David,
Strange. The next thing I would try is to take the "non-working" file
and saving it under a new name so it can be used as a test bed. First
check to see that the new file still "fails" when attempting to use the
Compare Projects utility. Once you have a test file, try paring it down,
perhaps by deleting half the tasks and see if "size matters". If you can
still see the problem with a smaller file it may be easier to
troubleshoot, although a few months ago another user sent me a file that
was about 5 lines total and it failed when we tried to run the compare.
Unfortunately we never did find a suitable answer to his problem.

Keep me posted.
John

Customize Filter in PWA Task view won't work with added fields.

Posted: 21 Mar 2005 08:47 AM PST

You're welcome, George - good luck :-)

Mike Glen
MS Project MVP





George F wrote: 

Earned value vs work contour

Posted: 18 Mar 2005 10:39 AM PST

Hi Julie,

thanks for the information.

I read the article and I'm glad to see I'm not alone thinking % work
complete is a better way of calculating earned value.

Jan

"JulieS" wrote:
 

Microsoft CRM - Customize new view in Quotes

Microsoft CRM - Customize new view in Quotes

Customize new view in Quotes

Posted: 27 Oct 2004 09:59 AM PDT

that realy helped.
thanx.

"Gautam" wrote:
 

modification questions

Posted: 27 Oct 2004 07:29 AM PDT

Well, I have a custom order entry program that I will be
using...I have users that will be entering new data into
CRM while the migration scripts run in the background. In
order for the users to be able to submit orders on the
customers, I have to have the customizations in there.

Jen 
would impact on data 
want to migrate the 
Web.Config. 
in 
data 
time 
just 

edit Activities Associated View of Account

Posted: 27 Oct 2004 05:59 AM PDT

Guy you are a great help one more question
I need this one:
Associated View: Activities:
The link you provided me brings me to the Associated
View: Tasks.
I use the Dutch version is their a diference?

Pieter

 
Customisation module. 
and modify them. 
below - make sure 
crm server. 
{00000000-0000-0000-00AA-000010001901} 
{00000000-0000-0000-00AA-000010001902} 
{00000000-0000-0000-00AA-000010001903} 
{00000000-0000-0000-00AA-000010001899} 
{00000000-0000-0000-00AA-000010001900} 
{00000000-0000-0000-00AA-000010002000} 
message 
Activities in an 

OrganizationUIBase FieldXML question

Posted: 27 Oct 2004 05:17 AM PDT

Jason:

Great idea! I knew (or hoped!) that there must be an easier way to do what I
was trying to do.

Thanks!

"Jason Hunt (Invoke Systems)" <invokesystems.com>
wrote in message news:phx.gbl... 
it, 
rights. 
then 
extract 
for 

E-mail sent through CRM with a cryptic identifier

Posted: 26 Oct 2004 04:47 PM PDT

I think both, Ronald an Guy are correct in something.

You can remove the number from the subject, as Guy said and post the article.

But if you do so, you'll not be able to match the responses with the
accounts or contacts in the CRM.

You'll have to choose wich functionality you prefer.

Carlos

"jmc" wrote:
 

SFO - Microsoft.Crm.Platform.ComProxy access denied error

Posted: 26 Oct 2004 11:13 AM PDT

Hello John,
Thank you for your reply.
I found that the McAfee Access protection was blocking Outlook from
accessing the temp folder in the .NET framework folder. Removing the checkbox
solved the problem.
Thank you once again.

vikrantca


"John O'Donnell" wrote:
 

Domain Rename

Posted: 26 Oct 2004 05:11 AM PDT

Thanks for the post John. We are aware that renaming a forest is a very
detailed task and are planning accordingly. We have a team working on this,
however, the CRM piece is where we're having most of our troubles. We are
unable to find documentation stating that this is even possible or finding
posts from others that have tried/succeeded.

"John O'Donnell" wrote:
 

Microsoft Word - Printing Problems-Vertical lines through picture

Microsoft Word - Printing Problems-Vertical lines through picture

Printing Problems-Vertical lines through picture

Posted: 24 Feb 2014 02:52 PM PST

MY pictures have verticle lines through them, when I print from my laptop to the office printer. No one else is heving these issues? 

Any help would be greatly Appreciated,

Jim

I want to create custom icons for my macros

Posted: 24 Feb 2014 02:15 PM PST

I have created 7 macros that I would like to create custom "buttons" for on the QAT.

I have ready Greg Maxey's posts several times and they do not really address my issue.

How do I create a custom button and associate that with a Macro?

I have png files of the icons I want to use.

When I try to use the Custom UI Editor, after I have opened the file,  I don't see any scripts to associate the image with.

Thanks for your help.

How do I keep copied material from reverting to Cambria?

Posted: 24 Feb 2014 12:51 PM PST

Why is it that when I copy from a source that is in Times New Roman into a document that is also in Times New Roman, and click on "keep source formatting" it ends up in Cambria anyway?  I do not want Cambria anywhere in my documents - how can I get rid of it so I don't have to keep reformatting everything I copy? 

"This modification is not allowed because the section is locked."

Posted: 24 Feb 2014 12:49 PM PST

Hi. I am currently using Office 365 Home Premium. (I pay monthly for it.) I don't know why or how, but now every time I try to access my Microsoft word or excel documents, the words "This modification is not allowed because the section is locked." pops up at the bottom of my screen. Also, I'm asked to accept the Microsoft Office License Agreement. I have checked my subscription, which hasn't ran out. If anyone could help, that'd be great. 

Merge Fields

Posted: 24 Feb 2014 12:25 PM PST

I am working in word 2010 and I am having trouble with mail merge.  My data source has a field called "ltr_date" and I want to run a mail merge that says if ltr_date is (current date) then add three days and print that date (three days from the current date.

Also I need help with using the rules, I have a situation that goes as follows:

I have several funds that I want to print in a letter with the amount that is associated with that fund, now each person could have one fund or up to 4 funds I want only the funds for that person listed on the letter and then i want it to move on to the next person and list all funds for that person.

Example of what I need for further clarification.

If fund is not blank then enter amount

if fund is blank go to next person or next record

I know I need to use the next record or next record if option but not sure how to set this up can any one advise me on this.

Office 2013 AD RMS

Posted: 24 Feb 2014 11:41 AM PST

Hello,

I am evaluating ADRMS on Windows Server 2012 x64 with Office 2013 installed on Windows 8.1 x64. 

Initially, I tried with the Office 2013 eval version and was able to protect document using RMS. On switching to our vol licensed version of Office 2013, On trying Info->Protect Document it shows a menu item "Connect to DRM servers to get templates". But on clicking that it just shows an error "Sorry something went wrong opening IRM protected content. The system cannot find the file specified"


Windows server 2012 has AD DS & ADRMS installed. RMS uses internal DB. I tried with both https & http URL for licensing. I suspect either I have missed some steps/registry I used with the eval version or there is some difference/settings needed with the vol licensed binary

Is there a document that details the set of steps to implement/configure RMS (on win server 2012) to use with Office 2013 on x64 please? Similarily, Is there a document to configure Office 2013, preferably vol licensed version, to use the RMS?

I would also need to write applications using RMS SDK 2.1 to protect document that would be accessed using Office 2013.  Will setting up the SDK need any special care with the Office 2013 installed on the same machine?

Thanks

SN

Something went wrong

Posted: 24 Feb 2014 11:25 AM PST

I tried to open Microsoft word, I received a notice that said " Something went wrong, we couldn't start your program, please try starting it again later. I lost my product key?  

Opening Word attachments in O365 Outlook - text disappears

Posted: 24 Feb 2014 10:15 AM PST

Using O365 PRO (that option wasn't available in the drop down menu).

Recently, a problem has started for me where email attachments look fine in preview and when I open in protected view, but the second I hit enable editing, the text completely "disappears".  It's there somewhere because if I click "Select All", "copy", open a blank document and hit "Paste", it magically appears.  What's up with that?!!

It's a nusance generally but absolutely unworkable when in revision marks b/c the revisions and comments do NOT follow the copy/paste fix.

HELP!

Office 2013 - Mail Merge Totally not working

Posted: 24 Feb 2014 10:06 AM PST

I have printed from Microsoft Office the "Excel 2013 Help" document called "create and print mailing labels for an address list in Excel" and followed it to the letter at least 15 times with no success.

I have even changed the excel extension from .xlsx to .xls    and the word document from .docx to .doc but with no change in results.

In FILE/OPTIONS/ADVANCED/scroll down to: GENERAL....HAD BOTH THE BOX CHECKED & UN-CHECKED FOR " "Ignore other applications that use DDE"

Have used every file type in the dropdown when selecting the data.

Word is unresponsive at top of window, so it says.

How do I make this work....I have searched Google and tried everything suggested for Office 2013

I have office home and student 2013

Posted: 24 Feb 2014 09:19 AM PST

Anytime I tried to open it says a problem occurred so you cannot open it. please can anyone help me because I have to finish my assignment.  

Word Templete auto insert rows based on form field

Posted: 24 Feb 2014 08:23 AM PST

I would like to make a template that would auto insert rows based on a number in another field in the document - for example:

The employee performed [insert a number here] tests (tests #__ through #__).

And in another section it would automatically make the number of rows and number them in a table:

Test Number Type of Test

So, if I entered in [5] in the number of tests then the table would automatically look like this

Test Number Type of Test
1
2
3
4
5

Can't retain window size when switching between documents

Posted: 24 Feb 2014 08:18 AM PST

In previous versions of Word, it was possible to reduce the size of a document window in order to switch quickly between open documents or see portions of two or more at the same time. In Word 2010 moving the mouse anywhere near a reduced-sized window immediately restores it to its original size. I've experimented with the Options window but haven't found the key to making this behavior stop. Any suggestions will be gratefully accepted.

Tools lost

Posted: 24 Feb 2014 08:05 AM PST

When I open my Word and Onenote I cannot find the toolbar at the top (the bar for higlighting, bolding etc). How do I get that back? I cannot format the pages anymore 

Automatic Legend Bug?

Posted: 24 Feb 2014 06:21 AM PST

Hello Microsoft Community,

I was on the last step to finish my text when a strange bug appeared. My automatic legends that were in the text turned the images that they were refered after I saved as pdf, and I don't know why, both the pdf and docx file changed. May you people help me?

Microsoft Word / Excel Merge - Willing to pay for answer.

Posted: 24 Feb 2014 03:15 AM PST

Hello I have a number of rows in excel which I would like to merge to a document.

The rows contain different types of language exercises which must be merged to a text file then imported into a flash card program.

The issue is that each row has an exercise type. This determines what template this row must be merged with. There are many different exercise types. So there will be many different template types. The row contains cells numberd 1,2,3,4,5 etc. This field contain the data that I must insert into the template.

The end result should be one document that is in the same order as the excel spread sheet.

Here is a example of the end product :

-----------

C : Acme
FT : Audio Guess The Word From The Definition

The highest point, as of achievement or development.
AcmeTheHighestPoint.mp3
Acme
Acme.mp3


FT : Audio Guess The Word From The Synonyms
SAIINM : F

Zenith, summit, highest point;
AcmeSynonyms.mp3
Acme
Acme.mp3


FT : Picture Name The Common Concept
SAIINM : F

Acme
Acme.mp3
Green Peak.jpg
Rock Snowey Peak.jpg
Rocky High Point.jpg


FT : Type What You Hear
SAIINM : F

Acme.mp3
Acme
f

FT : Audio Replace Word With A Synonym
SAIINM : F

When he was at the (high point) of his career, a scandal brought about his downfall.
AcmeReplaceQuestion1.mp3
When he was at the acme of his career, a scandal brought about his downfall.
AcmeReplaceAnswer1.mp3


----

FT : determines the template to use.

I am not sure if this is possible to do? Would be willing to give some money to someone who can solve quickly. Thanks

WORD 2010 Bug on Greek language change case tool.

Posted: 24 Feb 2014 01:24 AM PST

I noticed that when writing a text in greek, in Word 2010 and i use the change case tool to convert

a text from uppercase to lowercase, the words loose their  intonation. Greek language is the only language

that uses intonation on words.

thank you

citations greyed out in a certain document section only

Posted: 24 Feb 2014 12:39 AM PST

Hello everyone.

I have a problem with a particular section of one of my documents.

as title says, in this particular section/chapter the citations are greyed out.

in the remaining documents and in an eventual new one it all works fine.

i actually solved this issue by deleting the whole section, creating a new one and copy-pasting the content from a previous version, and deleting every source already existing in the master list, but i would like to know what could be the cause of this. I have the feel that this could happen again but i can't keep recovering previous versions again and again.

i've read several topic stating that the only solution fro greyed out citation is to uninstall and re-install office, but in such cases the citations were greyed out in every document opened, even a new one.. to me it only applies to this particular document section..

maybe there is a key combination for locking or disabling this function that i could've pressed unintentionally?

also, the document in this case is a complete version of my thesis, made out of copy paste of several single files.. this have caused also several double citations i was manually replacing.. could this have messed out my citation list somehow?

thanks in advance

Can't open Word File because of end tag/start tag mismatch error..Need Help!

Posted: 23 Feb 2014 11:32 PM PST

This is the link to my doc.

Hopefully anyone expert in XML can fix it for me.

Many Thanks!

How to create a VBA script for Mail Merge where fields will DOCVARIABLE instead of MERGEFIELDS?

Posted: 23 Feb 2014 11:17 PM PST

  Please help some one.

How to increase fields for mail merge?

Posted: 23 Feb 2014 10:51 PM PST

I am using Word 2007 that I am trying to merge in more than 256 data fields from an excel 2007 file. Please give me a way without CSV format.

Count active document file number in folder

Posted: 23 Feb 2014 07:00 PM PST

Hi,

I have a macro that cycles through documents in a folder and prints them to file as a .prn. It works briliantly. However, it has to sort through over 900 files to do so. To speed the process, I added in a code to hide the Word application and just run it behind. This reduces the time the pc has to draw each document on screen as it is opened. This in turns removes the ablity for the user to see the progress of the conversion.

I have found a way to make a progress bar to appear on screen as it cycles through the files. However, I can't find how to determine the number of the file in folder that is open. I found a metkhod to print the number of files in a folder here on one of the forums:

http://answers.microsoft.com/en-us/office/forum/office_2007-excel/how-to-find-number-of-files-in-a-folder-via-vba/87c650de-c0b3-46b0-b7d2-284e0b3b328f

I wanted to have a message on screen:

Converting file "active document number" out of "number of files in folder"

Does anyone know how to find the active document number or can suggests another way to show the progress?

I appreciate all your suggestions.

Label printing

Posted: 23 Feb 2014 05:48 PM PST

I am trying to print labels from Word 2010.  I am using a Fuji Xerox CP305d printer.  I want to use Tray 1 and not manual feed as I have done in the past.

My computer was recently upgraded and now it constantly asks me to manual feed.

Microsoft 2013 won't open

Posted: 23 Feb 2014 04:33 PM PST

I just updated to Windows 8.1 today and I had windows 8 when I originally installed microsoft home and student 2013. Now that I updated I can not open my word, excel, powerpoint or anything relating to the program. Can someone please tell me how I can fix this. 

How do I turn off keytips/alt functions/ the ribbon in word?

Posted: 23 Feb 2014 04:22 PM PST

When I hit "alt" the keytips come up. They never used to do this and it's very annoying because now I can't use all the shortcuts I had set using the "alt" button. Can someone please help me turn this off? I have been googling how for hours. I have closed and reopened Word and restarted my computer and everything. 

Cannot delete file saved in 97-2003 format when created by Word 2010

Posted: 22 Feb 2014 08:24 PM PST

I create a file in WORD 2010 and save it. I now open it later and save it in word 97 - 2003 format. It saves fine. But now I cannot delete this 97 - 2003 file because it says that it is in use by WORD. How can I get rid of this file from my disk.
Subscribe to: Posts (Atom)