Pages

Search

Open Office - [discuss] CPanel extract tool

Open Office - [discuss] CPanel extract tool

[discuss] CPanel extract tool

Posted: 27 Mar 2008 08:06 PM PDT


Barbara, you have subscribed to a mailing list. To unsubscribe send an
email to the address at the bottom of this email. You must send the
email from the address you subscribed with. When you send it the server
will send an email requesting confirmation that you wish to unsubscribe.
Follow the instructions in the confirmation email (i believe all you
need to do is reply to it). Then no more emails from this mailing list.


On Sat, 29 Mar 2008 11:48:14 +1100
Barbara E Pye wrote:
 


--
Michael

All shall be well, and all shall be well, and all manner of things shall
be well

- Julian of Norwich 1342 - 1416

---------------------------------------------------------------------
To unsubscribe, e-mail: org
For additional commands, e-mail: org

[discuss] Our New Look

Posted: 27 Mar 2008 05:00 AM PDT

Hi;

On Wed, 2008-03-26 at 23:42 -0400, Louis Suarez-Potts wrote: 
May I suggest you send the above message to the org
mailing list as well. They were unaware that the new site was ready.
All of the comments so far have been complimentary. They were also
unaware that the new home page was tied to the release of 2.4. 
--
Regards Bill


---------------------------------------------------------------------
To unsubscribe, e-mail: org
For additional commands, e-mail: org

[discuss] [moderated] Impress can not play WindowMedia Player

Posted: 26 Mar 2008 09:50 AM PDT


On Thu, 2008-03-27 at 09:33 +0700, Lam Bui Bao wrote: 

Use a hyperlink to the file eg on my system I go to insert in the
impress menu then hyperlink and put /home/ian/videos/<filename> in the
URL box (could link like this eg to YouTube or a web based video
source). This will call up the file called <filename> in my video folder
on my computer and as long as it is associate with an application it
will automatically launch that application to run the video. So you can
run any video in any format not just the ones supported by MS.

When I click the link on the slide it calls up Totem video player and
plays the video. On a windows system it should call up Windows media
player for a WMV file so you have the full functions of your player.
Close it at the end and move to the next slide. I can't really see the
point in going through a load of coding effort to try and guess
Microsoft's video formats which they can and do change at a whim when
you can just use the player that comes with Windows and indeed other
players for other formats - eg mplayer for flash video etc.

Ian
--
New QCA Accredited IT Qualifications
www.theINGOTs.org

You have received this email from the following company: The Learning
Machine Limited, Reg Office, 36 Ashby Road, Tamworth, Staffordshire, B79
8AQ. Reg No: 05560797, Registered in England and Wales.



---------------------------------------------------------------------
To unsubscribe, e-mail: org
For additional commands, e-mail: org

[discuss] data importing features on calc

Posted: 26 Mar 2008 09:49 AM PDT

e-mail from Frank Stecher from Hamburg 20097 DE:

Hi,

what's about Insert Sheet from File ? Give it a try.

Frank

That solved my problems, it automatically imported the .txt file into
the spreadsheet without having to first select .csv format.

Thanks Frank!

-----Original Message-----
From: Michael Adams [mailto:net.nz]=20
Sent: Thursday, March 27, 2008 6:04 AM
To: org
Cc: Koid, Jian
Subject: Re: [discuss] data importing features on calc

But if you are importing it as a .csv you can rename it from .txt to
..csv without drama?

Aren't .txt files containing .csv data non standard? (I know .csv is a
type of text data, but calling a car a Ford narrows things down a bit).
This rattles the poor programs paramaters a tad.

On Wed, 26 Mar 2008 15:44:35 -0400
Koid, Jian wrote:
 


--=20
Michael

All shall be well, and all shall be well, and all manner of things shall
be well

- Julian of Norwich 1342 - 1416

---------------------------------------------------------------------
To unsubscribe, e-mail: org
For additional commands, e-mail: org

[discuss] New Website

Posted: 25 Mar 2008 01:11 AM PDT

this continues to make me worry about the policy of allowing
unsubscribed addresses to post.

A gentleman posted offering the free services of his professional web
development shop, asking who to contact.

Two subscribers hit Reply and answered, but he won't see it.

Hate to revive a dead horse just to beat it one more time, but WHY allow
unsubscribed posts (IMO, should not be allowed, persons who do not wish
to receive list emails can use the forums!) if the headers are not set
up to reply to the author of the post-being-replied-to as well as to the
list?

Should it really be up to Discuss listmates to reveal full headers on
all incoming posts to which they wish to reply, scan through dozens of
header lines looking to see if there is a "Delivered-To: moderator for
org" line, and manually copy the OP's email address
into a cc field?

Even if list admins don't think that is too much to ask, folks just
don't know or don't always remember to do this. It leaves the OP feeling
like there is no community support. Very bad for PR and for expansion of
the user and developer communities.

kazar

---------------------------------------------------------------------
To unsubscribe, e-mail: org
For additional commands, e-mail: org

[discuss] e-mail

Posted: 23 Mar 2008 09:34 PM PDT

On Mon, 24 Mar 2008 12:22:12 net wrote:
 

As you've emailed this to a user mailing list, no-one here is going to be able
to help you.

Downloading OpenOffice from www.openoffice.org, does not require an ID and/or
password - I would recommend that you get in touch with the people running
the site you downloaded from.

--
Klaas Visser
Sydney, Australia

Always and never, are two words you
should always remember never to use

---------------------------------------------------------------------
To unsubscribe, e-mail: org
For additional commands, e-mail: org

[discuss] Advertising Strategy

Posted: 23 Mar 2008 09:34 PM PDT

-----BEGIN PGP SIGNED MESSAGE-----
Hash: SHA1

Hi, Kim.

Kim Gerback. If you did not send the original email, then
please disregard this message. Your email address was
apparently used to spoof this email to a email list run by
a free alternative to Microsoft Office (Open Office) which
does more that Microsoft Office, and is completely FREE.
On the other hand, If you did actually send this misguided,
uneducated message, please read this email as well as any
other emails that are replies to this email. Hopefully,
you'll learn of the errors contained in your statements.

Disclaimer: I'm just a user of ooo (OpenOffice), and thus
cannot be held legally responsible as a representative for
the ooo team or the product. I am merely a happy user of
ooo for almost six years. I will never re-install MS Office,
nor pay Bill Gates for another application, if there is
any way around it.

~ (Hey, ooo guys. Doesn't "Kim" sound like a MS plant, or
~ an MS plant sending email from an SBCGlobal (Yahoo) home
~ email address, or an SBCGlobal account paid for by MS?
~ Anyway...)

I'm sure that you've heard the answer over and over from
many different ooo-discuss readers, both on-list and
off-list.

| make it compatible with Microsoft Word.
If you've actually tried ooo, then you know that ooo *IS*
compatible with MS Word in multiple ways. I supports three
versions of MS Word, as well as compatible file formats.

| I found out that I can't use Open Office documents to
| send them to friends and teachers who have Microsoft
| Word because the file ends up as "corrupted" and cannot
| be opened with Microsoft Word.
If you save your ooo document as RTF (Rich Text File), then
any of your WinDoze Werd email recipients can read your
document perfectly in many different word-processors,
including WordPad... which has been distributed with
WinDoze for almost 10 years or more. Yes, even M$ Werd
can read an RTF perfectly.

| Doesn't do me any good, so I bought Microsoft Office.
Fine. You have made your choice to give Bill Gates and
M$ more money before you even posted to the list.
You may become another non-thinking "clone" willing to
pay big $$$ for substandard piece of software.

(Group: That was the statement that clinched it for me.
~ This post is just hate mail from an M$ employee, who
~ has been tasked with posting a message on the ooo lists,
~ trying to dissuade ooo users from using ooo, incidentally
~ the ooo project is now approved by IBM. I wonder if that
~ means that ooo is going to be under the IBM-Lotus budget.
~ ;) Hmmm, yet another reason for M$ to start fraudulently
~ attacking ooo in any way they can. :) )

Kim Gerback, or whoever you are -
Why didn't you just post this using your microsoft.com or
your msn.com or your hotmail.com email account?
Were you afraid that we wouldn't see through your fraudulent
ruse?

Group: I will forward any "postmaster" responses from
~ SBCGlobal.net, for all on-list to see.

Peace, All.

Barry Smith
- - sent from Thunderbird, a FREE email program that supports
email better than M$ OE or M$ Outlook ever could.

PS: Yes, I use email encryption (see my key ID mentioned below).
~ I prefer that direct communication between email users
~ be protected through non-government-regulated tools.
~ I'm not anti-government, nor anti-establishment.
~ I'm just "Open" and honest.

Kim Garback wrote:
| Hi, wonderful minds of Open Office.
|
| Here's an idea about how to market for Open Office: make it compatible
with
| Microsoft Word. I wasn't happy to begin with because Open Office doesn't
| have all of the options Microsoft Word offers for its documents. Then I
| found out that I can't use Open Office documents to send them to
friends and
| teachers who have Microsoft Word because the file ends up as
"corrupted" and
| cannot be opened with Microsoft Word. Doesn't do me any good, so I bought
| Microsoft Office.
|
| Just thought I'd let ya know: your product sucks.
|
| Kim
|


- --

Barry Smith (2008-01-21 2048 no expire)
<bnsmith001 [at] gmail [dot] com>
Public Key ID : 0xBA649960
Key fingerprint : BAF9 A3F3 DF31 5038 1D72 442C 80E9 FF84 BA64 9960
If you can't find my key, tell me what keyserver to upload it to.

Outgoing mail is certified Virus Free.
Checked by Symantec Antivirus Corporate edition
(http://www.symantec.com).
Version: 10.0.0.359 / Scan Engine 103.0.2.7
Virus Database: 100321d Release Date: 2008/03/21 rev. 4


Peace and Love!
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.8 (MingW32)
Comment: Using GnuPG with Mozilla - http://enigmail.mozdev.org

iEYEARECAAYFAkfpRxkACgkQgOn/hLpkmWDx/gCfQbjHvbsJ2PKxKMOYHnfYg+iw
jp0Anj09Cfomut0TqUOkW++n6xYawI4f
=U0LR
-----END PGP SIGNATURE-----

---------------------------------------------------------------------
To unsubscribe, e-mail: org
For additional commands, e-mail: org

[discuss] Suggestion for WordPerfect Compatible option

Posted: 22 Mar 2008 10:31 PM PDT

On Wed, Mar 26, 2008 at 3:18 AM, David wrote:
 

Creating a template would be trivial, if one either:
* has the specifications;
* has a working version of the program;

I have no idea if the version of WordPerfect I have, will run on my
current system. (It came with either Mandrake 1.0, or Corel's Linux
Desktop. I use Ubuntu Christian Edition.)
 

OOo menus can be customized to reflect the layout of WordPerfect.
Some, but not all of the keystroke combinations can also be remapped
to that which was used by WordPerfect.

[Personally, I'd rather remap to the WordStar Command set. But that
requires rewriting the OOo code.]

The major feature that WordPerfect users want, that OOo does not
direclty offer is Reveal Codes;

In OOo Reveal codes add zero functionality. None the less, there is
a macro that will provide something similar to Reveal codes in Write,
and a second macro does that for Calc.

xan

jonathon

---------------------------------------------------------------------
To unsubscribe, e-mail: org
For additional commands, e-mail: org

[discuss] OpenOffice Verson of Outlook?

Posted: 13 Mar 2008 05:57 PM PDT

Bob Foxworth wrote: 

There are two alternatives that I would suggest: Thunderbird and
Evolution (http://shellter.sourceforge.net/evolution/). Both are free
quality mail clients. If you're a little more fond of Outlook Evolution
might be a better fit.

---------------------------------------------------------------------
To unsubscribe, e-mail: org
For additional commands, e-mail: org

[discuss] ternary diagrams

Posted: 13 Mar 2008 02:37 PM PDT

Hi Tomas,

OOo chart does not offer ternary diagrams so far, but feel invited to
submit a feature request for that:
http://qa.openoffice.org/issue_handling/pre_submission.html

Then maybe this issue get some votes if other users are also interested
in this feature.

Kind regards,
Ingrid

Tomas Lanczos wrote: 


---------------------------------------------------------------------
To unsubscribe, e-mail: org
For additional commands, e-mail: org

[discuss] OpenOffice Software

Posted: 13 Mar 2008 01:32 PM PDT

jonathon wrote: 

I just went half mad with frustration, unable for several days to update
a website that I manage, because, as I eventually discovered, the
damfool Microsoft firewall, which I had turned off, had turned itself on
again, without even notifying me, let alone asking my permission.

Sometimes I wish IBM still made mini-mainframes, so I could just cut
over everything to z/OS.

--
John W. Kennedy
"Sweet, was Christ crucified to create this chat?"
-- Charles Williams. "Judgement at Chelmsford"

---------------------------------------------------------------------
To unsubscribe, e-mail: org
For additional commands, e-mail: org

[discuss] OpenOffice for Mobile phones ?

Posted: 13 Mar 2008 01:25 PM PDT

On Thu, 13 Mar 2008 19:05:08 -0600, jonathon <com>
wrote:
 

well my EEEPC has 512 of RAM and runs OOo 2.3 really excellent no slowdown.
 

Actually the problem is not that, but the UNO API and refactoring. The
problem is that is monolitic and that usually double the resource
(Symbian/WinMobile AND UNO).

However it is possible to have a ODF editor done with the Symbian toolkit
and just have one framework to edit the ODF. As a matter of fact there is
a viewer of ODF in mobile phones which was shown in Barcelona called
SEPT-Mobile Office.
http://www.symbianone.com/content/view/3736/
 



--
Alexandro Colorado
CoLeader of OpenOffice.org ES
http://es.openoffice.org

---------------------------------------------------------------------
To unsubscribe, e-mail: org
For additional commands, e-mail: org

[discuss] Simple Typo

Posted: 13 Mar 2008 01:24 PM PDT

Hi;

This is a grammar trap I have had to look up several times in my life to
get the correct usage of Latin origin words. My main reference is
"Fowler's Modern English Usage". He has several entries under "plurals",
"latin plurals", etc.

It seems to boil down to this:

The English language uses words of Latin origin in three ways.

* Words that have been taken/borrowed from Latin; either directly
or through french; but have become fully integrated into the
English language as English words.
* Words that have a technical meaning; defined by scientists,
mathematicians and other technical writers or speakers. This is
a holdover from the days when Latin was the 'lingua franca' of
early science. Because of this early international scientific
usage and fixed definition they are still considered Latin
words, not absorbed English words.
* And of course, Latin words that are used in Latin phrases and
quotations by Lawyers and Philosophers. They are Latin words
because their original Latin meaning is intended within the
quotation.

Examples of pluralization:

English words, even if the origin was Latin but are now used in common
English, are made plural by adding an 's' -- as would be expected. E.g.
"I have several different formulas I use to pick up girls". Or,"The
formulas used are just basic rules of thumb".

Technical words (math, physics, chemistry etc) are not English, they are
a "lingua franca" of science and don't change in their very specific
meaning.
"This is a formula: A=Pi r ^2"
"These are formulae: A=Pi r ^2, and, a^2=b^2+c^2"

Of course, If you are using Latin phrases or quotations, they should be
pluralized using proper Latin grammar.


On Thu, 2008-03-13 at 01:31 -0400, SBernheart wrote: 

In the case mentioned above, OOo should use formulae because it is
making reference to using precise mathematical symbols.

--
Regards Bill


---------------------------------------------------------------------
To unsubscribe, e-mail: org
For additional commands, e-mail: org

[discuss] Theme support for OpenOffice.

Posted: 11 Mar 2008 01:16 AM PDT

Well actually there is a mild theme support which is that most of the
icons are png and stored under zip files. This files are also stored under
[OpenOffice.org]/share/config/

This has all the iconset stored in zip packages. It wont be that hard to
get a new theme load up (or maybe it does) but would be better to have a
zip with the new theme.

Now I know this might not be all that you wanted and you are looking for
toolkit support. However the toolkit wasn't built for theme in mind and
the actual color scheme would need to be either engineer or activate. This
is easier to ask once we get an actual iconset to work with.


On Mon, 10 Mar 2008 13:22:54 -0600, Marseille Hunter
<com> wrote:
 



--
Alexandro Colorado
CoLeader of OpenOffice.org ES
http://es.openoffice.org

---------------------------------------------------------------------
To unsubscribe, e-mail: org
For additional commands, e-mail: org

[discuss] Why not LGPL _and_ LGPL 3.0 ?

Posted: 07 Mar 2008 11:33 AM PST

The only difference is to avoid the introduction of DRM technology into
OOo under chapter 3? Are you doing such a thing?

On Fri, 07 Mar 2008 13:31:30 -0600, theUser BL <com>
wrote:
 



--
Alexandro Colorado
CoLeader of OpenOffice.org ES
http://es.openoffice.org

---------------------------------------------------------------------
To unsubscribe, e-mail: org
For additional commands, e-mail: org

[discuss] New License and Contributor Agreement

Posted: 07 Mar 2008 12:56 AM PST

To Louis Saurez-Potts: Have they even given consideration to people who
have many documents in the older format? Will there be consideration for
some kind of conversion of those documents? :-(

Louis Suarez-Potts wrote: 

---------------------------------------------------------------------
To unsubscribe, e-mail: org
For additional commands, e-mail: org

Identification of software key for Office 2004 install Microsoft Office for Mac

Identification of software key for Office 2004 install Microsoft Office for Mac

Identification of software key for Office 2004 install

Posted: 03 Feb 2008 05:43 PM PST

Hi Bob:

Yes, sort-of. If you look in the Application menu for the About item and
display that, it will display the Product ID to you.

If you find two machines on which all but the last five digits match, the
same key was used on those two machines.

It won't tell you "which" key was used, just that the "same" key was used.

Cheers


On 4/02/08 11:13 AM, in article caR9absDaxw,
"com" <com> wrote:
 

--
Don't wait for your answer, click here: http://www.word.mvps.org/

Please reply in the group. Please do NOT email me unless I ask you to.

John McGhie, Consultant Technical Writer
McGhie Information Engineering Pty Ltd
http://jgmcghie.fastmail.com.au/
Nhulunbuy, Northern Territory, Australia
+61 4 1209 1410, mailto:name

VB Editor - Command key stuck?

Posted: 03 Feb 2008 04:25 PM PST

Sorry, I should've said - yep, I've checked both of those. Thanks for the suggestion - I'll try it tonight.

Illegal handling of Greek Characters in Speller (Office 2008)

Posted: 03 Feb 2008 10:45 AM PST


Thanks for the try.

I am sure that this is a bug in these two apps. It is correct that the
language is applied to the whole doc but this is not the problem.
Try the following. Write a few greek words in an excel sheet (i hope
you can) like the ones in the list (ðÜëé, ððð Ýíáò). Calling the
speller, the words containing greek letter pi (ð) presented with only
the pi letter in the spell dialog. All other characters are missing.
The word with three pi (ððð) appears correctly. This means that excel
passes only pi from greek chars to the speller. If the greek word
contains two nonconsecutive pi then the speller presents the first as
unknown word and then the second as a different unknown word
considering the characters between the two pi as space chars. If
instead of greek chars you put english chars between two
nonconsecutive pi then the whole word is correctly passed to speller
and handled normally.
In Entourage not even the pi is passed to speller. Greek chars
considered as empty space.


On 4 Öåâ, 13:05, John McGhie <name> wrote: 

Appleworks conversion

Posted: 03 Feb 2008 09:00 AM PST

PS to my own (which I actually tried to cancel):

While there are free scripts out there, this question has a lot of
different variations and issues that you could run into that would take
a lot of time to work around, so it's probably worth just biting the
bullet and paying for MacLinkPlus (that Michel linked), which is a more
extensive program that should already have taken all these issues into
account.

Daiya Mitchell wrote: 

Good web version of these forums

Posted: 02 Feb 2008 04:27 PM PST

Problems? What problems? I am not seeing any problems in Entourage?? :-)


On 4/02/08 8:14 AM, in article
C3CB83B1.12195%entourage.mvps.org, "Diane Ross"
<entourage.mvps.org> wrote:
 

--
Don't wait for your answer, click here: http://www.word.mvps.org/

Please reply in the group. Please do NOT email me unless I ask you to.

John McGhie, Consultant Technical Writer
McGhie Information Engineering Pty Ltd
http://jgmcghie.fastmail.com.au/
Nhulunbuy, Northern Territory, Australia
+61 4 1209 1410, mailto:name

office 2004 on leopard

Posted: 02 Feb 2008 01:59 PM PST

I think the serial number should actually be on the back of the original
DVD case, not the booklet, if that helps. Labeled CD Key, an orange or
yellow sticker.

com wrote: 

Anyone else missing Microsoft Expression Media?

Posted: 02 Feb 2008 01:09 PM PST

In article <caR9absDaxw>, com
wrote:
 

You're right - I was misremembering.

I don't know how the fulfillment will work, but I would call the
too-free number on the form.

Missing letters

Posted: 02 Feb 2008 01:06 PM PST

On 2/2/08 1:06 PM, in article caR9absDaxw,
"com" <com> wrote:
 

Have you restarted your computer and run Repair Permissions?

Using Repair Permissions after installing MS Office or any application that
uses an installer is often advised. To use Repair Permissions:
1. Open Disk Utility in your Applications/Utility folder.
2. Click on the First Aid tab and select Repair Permissions
3. Click on the icon for your boot volume.
4. Click the repair permissions button.

Don't run from CD. Updates contain a newer versions of the application's
permissions.
--
Diane, Microsoft Mac MVP (MVPs are not Microsoft Employees)
Entourage Help Page <http://www.entourage.mvps.org/>
Entourage Help Blog <http://blog.entourage.mvps.org/>

Upgrading Office version from 10.1.4

Posted: 01 Feb 2008 08:30 PM PST

On 2/2/08 5:04 AM, in article C3C9D471.31A45%cast.net,
"CyberTaz" <cast.net> wrote:
 

Save yourself some time and use this page

I¹ve started a page with links that are either hard to find or missing.

<http://www.entourage.mvps.org/downloads/mactopia_dl.html>

--
Diane, Microsoft Mac MVP (MVPs are not Microsoft Employees)
Entourage Help Page <http://www.entourage.mvps.org/>
Entourage Help Blog <http://blog.entourage.mvps.org/>

Making Word recognise a font as a symbol font

Posted: 01 Feb 2008 05:29 PM PST

Did you test the Character Palette approach? Because in my quick tests,
symbols inserted that way did not change when I changed fonts in Word.

com wrote: 

Open Docs in Office Hangs System

Posted: 01 Feb 2008 12:36 PM PST

Thanks so much, Matt!

Alas, to the best of my knowledge we haven't added any funky utilities that I'm aware of; I'll have to check when I'm back in the office. And I know we aren't running any virus-check utilities—though we probably should start thinking about it again at this point.

Ah, well! Perhaps someone has added something without my knowing! I'll have to check the processes and see if there's anything odd running.

Again, thanks for your help!

Word shuts down

Posted: 01 Feb 2008 11:28 AM PST

You should be able to just go to Word's Help menu & select Check for
Updates. What you need will be determined, downloaded & applied.

Regards |:>)
Bob Jones
[MVP] Office:Mac



On 2/2/08 3:10 PM, in article caR9absDaxw,
"com" <com> wrote:
 

Microsoft CRM - Crystal Reports 10

Microsoft CRM - Crystal Reports 10

Crystal Reports 10

Posted: 23 Apr 2004 08:13 AM PDT

We were able to get Crystal 9 as a freebie when we
upgraded from Crystal 8.5 to 10. This was just a couple of
weeks ago. The version we received was 9.2.2. 
is not available 
CRM v 1.2 

connectint to crm through a modem

Posted: 23 Apr 2004 01:07 AM PDT

If you expose the server through your firewall, you can do this. You need to
open the port for the website (80 by default). When connecting, the users will
be prompted for a login though.

Matt Parks

----------------------------------------
----------------------------------------
On Fri, 23 Apr 2004 02:16:08 -0700, "Martin Gallagher"
<com.nospam> wrote:

Have you created a VPN connection?

Currently, CRM requires a VPN connection to connect to the CRM server over the
internet because it supports only integrated security and not basic
authentication. I don't know if this will help, but good luck.

Import as Lead or Contact?

Posted: 22 Apr 2004 08:23 PM PDT

Hi Bill:

If you are using an ASP.NET web application to allow the users to register,
you could add code right to the app to create the new CRM leads via the
SDK...

Look in the CRM SDK documentation under CRMLead...

John.

"Bill Bither" <com> wrote in message
news:google.com... 

Workflow Manager does not start

Posted: 22 Apr 2004 02:17 PM PDT

Are you able to use the web interface to CRM? Also, what type of license is
assigned to the user you are logged in as?

Matt Parks

----------------------------------------
----------------------------------------
On Thu, 22 Apr 2004 14:17:38 -0700, "Rakesh"
<microsoft.com> wrote:

I have new installation of CRM 1.2.
While starting Workflow Manager it's showing this message
"The specified Microsoft CRM Server is not reponding. This
might happen if it is currently unavaliable...."
or sometimes it gives
"You do not have sufficient permission to run workflow
manager. for more information , contact your system
administrator.

Please Help

Rakesh

HOWTO use CRM

Posted: 22 Apr 2004 12:53 PM PDT

Once you got CRM running:

If you want more detailed instructions, there are a couple
of books out there... check amazon or local bookstore for
them.

The Using MS CRM is the better of the two, but it skims
most of the functionality.

Good luck!
 

quite confused about Crystal report version

Posted: 22 Apr 2004 02:37 AM PDT

CRM comes with licenses for the users to view reports. If you want to modify
the reports or create your own, then you need to buy Crystal. Also, you need
v9.2.2 specifically for this.

Matt Parks

----------------------------------------
----------------------------------------
On Fri, 23 Apr 2004 09:01:31 +0800, "Hiway" <com> wrote:

Thank you for your reply, Martin.

That means standard CRM1.2 don't ship with Crystal Report licenses, and
users cannot use the Crystal Report unless we got the license? If we got the
special license, can we do customization ourselves or have to buy Crystal
Report v9 or v10 and the users license in order to design our customized
report?

Haiwei

"Martin Gallagher" <com.nospam> дÈëÏûÏ¢ÐÂÎÅ
:com... 
Reports v9.0 but you will need to purchase the licenses from your usual
sources to activate it. 
Crystal Reports v9.0 and use the enhancement patch that is available on your
CRM server CD to configure it for Microsoft CRM. I believe this option will
work for Crystal Reports v10 as well. 
responsible for customising reports as you would not want all users creating
ad-hoc reports.

CRM and SBS 2003 - Need Help!!!

Posted: 21 Apr 2004 09:27 PM PDT

I did previosly have Business Contact Manager installed. Would that cause a
problem?

"James Anderson" <rr.com> wrote in message
news:phx.gbl... 

Workaround for sorting activities by date!!

Posted: 21 Apr 2004 08:21 PM PDT

DOH!



"Bill Bither" <com> wrote in message
news:google.com... 

multiple instances of CRM

Posted: 20 Apr 2004 04:40 PM PDT

We are running a Windows 2003 Active Directory consisting
of a single Forest, single Domain. with Exchange 2003 as
the messaging system.
 
etc 
message 

SQL Server SP3a necessary for 1.2 upgrade?

Posted: 20 Apr 2004 02:31 PM PDT

"John O'Donnell" <com-nospam> wrote in message news:<#$yV#phx.gbl>... 

I found that one upgrade done with SP3a went fine. The other one done
with SP3 had View display problems:

Line: 35
Char: 1
Error: Object Expected
Code: 0
URL: http://server/_grid/grid_data.aspx?---------------

Is this a coincidence or does the way SP3a handle certain data such as
the views make a difference in the reason for this issue?

Microsoft Word - hyperlinks fail to connect

Microsoft Word - hyperlinks fail to connect

hyperlinks fail to connect

Posted: 12 Jul 2013 11:03 AM PDT

I am using Word 2013 in a virtual machine running Windows 7 and I use IE10 in that machine.

If I create a blank document and enter one line http://www.microsoft.com (without parentheses it will not link to the website but results in an error message:

<quote>

Microsoft Word

Your organisation's policies are preventing us from completing this acrtion for you. For more info, please contact your help desk

</quote>

I am the only one here and I need help.

 

I raised this in another thread about Excel failing to do the same and was advised that this may be due to the default web browser I am using.

I am unfamiliar with IE10 and cannot find out how modify the "policies" it mentions.

Help please or I may have to abandon Office 2013 and IE10.

 

I am trying to change the voice in Word 2010 for windows 8

Posted: 12 Jul 2013 07:54 AM PDT

This is driving me crazy. I need it to be a slower, softer female voice but I cannot seem to find the option to change it. I got it added to both my quick access bar and my ribbon. Where are the tools to change the voice settings?

For windows 8, microsoft office 2010.

Thank you to anyone who can help me today.

Word 2007

Posted: 12 Jul 2013 06:31 AM PDT

When I Try to open Word 2007 I get a screen "Configuration Progress" and then "Configuring Microsoft Office"  Word will only open after this screen is completed.  This happens evertime I try to open Word it doesnt apply to Excell or Publisher. I have tried to repair it using the Disc but it's still the same.  Can you please advise. Thank you.

MS Update on 7/10 has left all Word Docs are in Read Only mode

Posted: 11 Jul 2013 07:08 AM PDT

Team

One correction to my issue noted below, I'm using Windows 7, not 8.  Also, all my documents have become "read only", including Excel and PowerPoint documents.  It all happened after the update on 7/10 was automatically downloaded.

 

It appears that some sort of update took place from Microsoft on the 10th/11th of July, and now all my Word 2013 documents are in "read only" mode.  Is there some easy way to correct this?  It says the only way to edit the documents is to resave them as save as ...   But I have a ga-billion and 5 documents   ...well OK, I have a LOT of documents.  Please advise.

Export to a pdf file

Posted: 08 Jul 2013 11:07 AM PDT

I would like to merge to Vba codes I found on the net to obtain a single output in Pdf format.
As for the below code, only the first and last page is output as Pdf.
I would to obtain a single Pdf file that consists of "IEnd" pages, with the same name of the Word document.
Can you please help?  I am using Word 2007.

Thanks and Regards
JohnBi





Sub CertificatePrint()
Dim iStart As Integer, iEnd As Integer, i As Integer
On Error GoTo ErrHandler
With ActiveDocument.Shapes(1).TextFrame.TextRange.Field s(1)
iStart = CInt(InputBox("What is the first Certificate to print?", _
"Print Certificates From", Split(Split(.Code.Text, " ")(0), "=")(1)))
iEnd = CInt(InputBox("What is the last Certificate to print?", _
"Print Certificates To", iStart))
If iStart = 0 Or iStart > iEnd Then Exit Sub
For i = iStart To iEnd
If i = iStart Then
With Application.Dialogs(wdDialogFilePrint)
If .Show = 0 Then Exit Sub
End With
End If
.Code.Text = "=" & i & " \# 000"
.Update
'ActiveDocument.PrintOut
' Next

'---------- export pdf
ActiveDocument.ExportAsFixedFormat OutputFileName:= _
ActiveDocument.Path & "\" & ActiveDocument.Name & ".pdf", ExportFormat:= _
wdExportFormatPDF, OpenAfterExport:=False, OptimizeFor:= _
wdExportOptimizeForPrint, Range:=wdExportAllDocument, _
Item:=wdExportDocumentContent, IncludeDocProps:=True, KeepIRM:=True, _
CreateBookmarks:=wdExportCreateNoBookmarks, DocStructureTags:=True, _
BitmapMissingFonts:=True, UseISO19005_1:=False


On Error GoTo ErrHandler
Next

End With
ErrHandler:
End Sub

Office 365 won't open Office 2010 doc

Posted: 08 Jul 2013 10:04 AM PDT

I am collaborating with various people that are now on Office 365. 

I am on Office 2010 32 bit on windoze 7.

I email them a doc with outlook. They are receiving in in gmail, saving to hard drive. 

It will not open on Office365.

It says it is opening in protected mode, but never opens it.

They are on windoze 8.

One of them is on a brand new box.

Is there some setting thats gotta be changed on their end?

Upgrading Windows Office

Posted: 08 Jul 2013 07:56 AM PDT

My Microsoft Word program is "non-commercial use." My Windows operating system is Vista. I need a corresponding Microsoft Office pack to upgrade my Microsoft Word. What version is that?

E5.5 Migration Into AD Domain - Microsoft Exchange

E5.5 Migration Into AD Domain - Microsoft Exchange

E5.5 Migration Into AD Domain

Posted: 05 Jan 2005 09:33 AM PST

Thanks Mark, you made a good point. The only wrinkle there is that we have
several other legacy systems that are using a few NT 4.0 accounts. The
upgrade may screw them up so my upgrade may have to wait until I can wean
the legacy apps off of the old NT 4.0 domain.


Thanks,
Fred



"Mark Arnold [MVP]" <org> wrote in message
news:com... 
of 
NT 
over 
let 
and 
the 
I 
Does 

Imcdata logs

Posted: 05 Jan 2005 08:43 AM PST

Thank you............I tried your suggestion and it works

"Mark Arnold [MVP]" wrote:
 

Adding Legal Disclaimer to All Out-going Mail on E2K & E2K3

Posted: 05 Jan 2005 05:23 AM PST

Thankyou for the information, I really appreciate your very prompt reply!

I know what you mean about the name...


"Neil Hobson [MVP]" <silversands.co.uk> wrote in message
news:phx.gbl... 

need to save attachments sent to a dl

Posted: 04 Jan 2005 01:03 PM PST

What about script sinks?
If you need help just send me an email.
Stefan

"meg" <com> wrote in message
news:microsoft.com... 

Ms Exchange 5.5 decomissioning

Posted: 04 Jan 2005 11:38 AM PST

There is more to do/verify (http://support.microsoft.com/kb/152959)

1) Offline Address Book
2) Schedule+/FreeBusy data
3) Routing Calculation Server
4) Site connectors (if you have any)

"Ovidiu Tanjala" <com> wrote in message
news:phx.gbl... 

I need help with OMA

Posted: 04 Jan 2005 10:55 AM PST

Hi,
Are you saying that even if I change OWA to use 8080 OMA will still listen
at 80?

"Tim Hackbart [MSFT]" wrote:
 

New Message Indicator

Posted: 04 Jan 2005 05:55 AM PST

Hi Mike, our email comes in through pop account from another building in the
state, i believe they are doing spam filtering there, and they are having
problems today, i would assume this is why we are having this issue...

Thanks , Steve

"Mike Talon .Yahoo.com. >" wrote:
 

front-end OWA server

Posted: 03 Jan 2005 09:01 AM PST

I see your point and I concur....manager doesn't. Now just got to run it by
him again and again so he can understand that the firewall is becoming
"swiss cheese" with all these ports open. By the way, the ports are being
opened at the Firewall not the router. The ISA server is my next
recommedation.

"Skipster" <microsoft.com> wrote in message
news:com... 
the 
or 
the 
server 
the 
and 
DMZ 
mean 
it 
the 
the 
accessible 
subnet 
server 
the 
subnets, 
accessible 
and 
you 
able 
able to 
no 
your 
interface. 
local 
that 
the 
<com> 
read 
the 
to 
208.xxx.xxx.xxx 
allowed 
internal 
Firewall: 

Problem in exchange 2003 and ntbackup (shadow copy)

Posted: 02 Jan 2005 06:00 AM PST

You do not pay for hotfixes -- call up Microsoft PSS and tell them you want
the hotfix for KB # xxxxx, they'll ask for your email address, and minutes
later you willhave an email with a link to the hotfix along with a password.

--
Kevin Weilbacher [SBS-MVP]
"The days pass by so quickly now, the nights are seldom long"


<com> wrote in message
news:google.com... 

I think I'm being used as a SPAM relay -- can anyone help me?

Posted: 29 Dec 2004 06:59 AM PST

Outlook can use POP3, IMAP4 and MAPI, and if you are in corporate/workgroup
mode, you are using MAPI.

What about configuring your other systems to send through one of your
Exchange 2003 systems?

Also, do you have all of the latest security updates for Exchange 5.5
installed?
--
Scott Schnoll
This posting is provided "AS IS" with no warranties, and confers no
rights. Please do not send email directly to this alias. This alias is for
newsgroup
purposes only.


"Blake" <microsoft.com> wrote in message
news:com... 

outlook 2000 on behalf of

Posted: 28 Dec 2004 10:43 PM PST

If you want it to go as the other user you have give Send As rights in AD or
Exchange 5.5.

If you want to stop someone send on behalf of another user go to Tools,
Options, Delegates.

Glen


"jurie" <microsoft.com> wrote in message
news:com... 

wrong (.local) "reply to" address

Posted: 28 Dec 2004 03:49 PM PST

Yes, it will update itself periodically.
--
Scott Schnoll
This posting is provided "AS IS" with no warranties, and confers no
rights. Please do not send email directly to this alias. This alias is for
newsgroup
purposes only.


"Robert" <microsoft.com> wrote in message
news:com... 

Change Display Names in Exch '03 to Last,First

Posted: 28 Dec 2004 01:03 PM PST

It's built in. You access it via a command prompt. On your AD server, go
to a command prompt, type ldifde /? and you will get the variables.
http://www.computerperformance.co.uk/Logon/CSVDE_LDIFDE.htm is a website
that should help you out as well. Here is another one.
http://support.microsoft.com/kb/q237677/

--
Ben Winzenz
Exchange MVP


"Precision" <microsoft.com> wrote in message
news:com... 

Using Kill.exe on Store.exe??

Posted: 28 Dec 2004 12:17 PM PST

Hello,

If the information store that is experiencing the 217 error is not
dismounted, couldn't this cause corruption? or does the 217 error imply that
this particular store is already dismounted?

This wasn't exactly clear to me:

"Dismount all information stores that are not experiencing the problem that
is described in the "Symptoms" section. For more information about how to
dismount a store, see the "Dismount a Store" topic in Exchange Server 2003
Help.

Important Do not dismount the information stores that are mentioned in event
ID 217."

Thanks,
Exchange2003

"Teo Gomez" wrote:
 

No New Data Appearing in Web Outlook for One User

Posted: 27 Dec 2004 04:53 PM PST

Hi Mort:

Thanks, for the reply!!!

I'm not sure. Can you tell me where to go into Outlook and look?

childofthe1980s

"Mort Billups" wrote:
 

Outlook loses connection to Exchange 2003

Posted: 27 Dec 2004 02:46 AM PST

Check all the obvious infrastructure issues carefully.... DNS WINS ETC....
maybe check ure switch for network errors ( if u have a managed switch)

Is the server under hi IO load?? What speed hard disks r u running?



"Johann J Hanekom" <co.uk> wrote in message
news:.. 

Exchange 5.5 / OWA / errors

Posted: 26 Dec 2004 04:56 PM PST

Thanks. I will try today.
"neo [mvp outlook]" <mvps.org> wrote in message
news:phx.gbl... 
those 
started 

Should I install Oulook on my Exchange Server?

Posted: 26 Dec 2004 01:09 PM PST

Thanks guys, that was it! I knew I have read it, I just couldn't find it
again. I even used google <G>. Thanks again for your help!


Clayton



"Clayton Sutton" <com> wrote in message
news:phx.gbl... 
Outlook 

Restrict users from sending outside email

Posted: 23 Dec 2004 03:13 PM PST



"Lanwench [MVP - Exchange]" wrote:
 
I'll trt it and see what will happen.

POP3 Mailbox problems

Posted: 23 Dec 2004 10:38 AM PST

Boris the Spider wrote: 

Set up an SMTP connector, keep the address space as *, and set it to deliver
to your ISP's SMTP server as a smarthost. Don't select "allow relay to these
domains" whatever you do!

email treated as junk/spam mail

Posted: 22 Dec 2004 10:47 PM PST

desperate employee wrote: 

You need to find out from the recipients mail server why they are
kicking it. Are you on a RBL/SBL or are you missing a ptr record for
your IP address?

--
-------------------------
Paul Stewart
Lexnet Inc.
Email address is in ROT13

Recovering Deleted Email

Posted: 22 Dec 2004 09:09 PM PST

MDB wrote: 

Create an ad user account with an exchange mailbox. Right click the
message store. Place a check in the box that says "Archive all messages
sent or received on this server". And select the mailbox. You can then
open the mailbox with outlook and see anything that comes or goes from
that point forward. Outlook 2003 has some pretty good sort, view and
find features. If these options are greyed out look through esm until
you find a system policy that may be applied and make the changes on the
system policy instead of the message store. Hope this helps.

--
-------------------------
Paul Stewart
Lexnet Inc.
Email address is in ROT13

Custom NDR's

Posted: 22 Dec 2004 12:57 PM PST

In article <phx.gbl>,
com says... 

yep, they will re-write the .dll file that the code is contained in if I
remember correctly ...

....but isnt this such a pathetic limitation. they could even sell it as
an add on option pack to be able to re-write ndr's, close/over limit
mailbox messages, etc, etc as the standard text is useless - i dont want
my users to start thinking about .pst files when they're near their
limits.

Program Manager Approval Question Microsoft Project

Program Manager Approval Question Microsoft Project

Program Manager Approval Question

Posted: 07 Sep 2004 02:21 PM PDT

Thanks for your help. Will past this on and get back
with you if there are questions.

2Fast... 
2003. In order to 
members, you must 
task. On the View My 
to the correct 
while delegating the 
respective PM's View My 
simply click the 
to you for final 
however, there is no 
he/she will need to 
state that the update 
Hope this helps. 
message 
would 

Getting Critical Path to show.

Posted: 07 Sep 2004 08:48 AM PDT

When you say that you "actually have the finish date set", do you mean
that you entered a date by which you want your project to end? If this
is so, then that's what's causing your problems. The point of
scheduling software like MS Project is to tell you, given the amount
of work and number of resources you say you have, when you WILL
finish. If you tell it when you MUST finish, then you essentially
hamstring the software. It becomes basically a spreadsheet.

Sarah

Adjust the height and font of the MS Project Gantt timescale?

Posted: 07 Sep 2004 08:39 AM PDT

my memory's not that good these days :)

"Jan De Messemaeker" <jandemes at prom hyphen ade dot be> wrote in message
news:phx.gbl... 

Help for beginners

Posted: 07 Sep 2004 06:40 AM PDT

Brian,

You are a world class act, I appologise for being so
defensive. I wish you the best, and I am glad you are
doing well, keep up the good work and good luck.

Jeff 
newsgroup post is a 
well as to discover 
and the solutions to 
message 
Glen, Steve House, 
gaps between the 
group I read every 
other begginners. 
problems that I can 
I know you don't 
life easier!! 

Bar Labels

Posted: 07 Sep 2004 06:36 AM PDT

Hi sw

- i actually did the same thing when i was testing it :)

glad to assist

Cheers
JulieD

"sw" <microsoft.com> wrote in message
news:09e901c494ee$70a782d0$gbl... 

Project 4.0 files

Posted: 07 Sep 2004 04:37 AM PDT

Hi Laurent,

Welcome to this Microsoft Project newsgroup :-)

Please see FAQ Item: 27. Project 4 to Project 2000

FAQs, companion products and other useful Project information can be seen at
this web address: http://www.mvps.org/project/

Hope this helps - please let us know how you get on :-)

Mike Glen
Project MVP

Laurent A wrote: 

Leave Reports

Posted: 06 Sep 2004 09:05 PM PDT

Hi,

On my Website I have a macro transforming "Calendar" absences into "Non
Working Time" Taks
HTH

--
Jan De Messemaeker
Microsoft Project Most Valuable Professional
http://users.online.be/prom-ade/index.htm
32-495-300 620
"Rob Schneider" <net.net> schreef in bericht
news:phx.gbl... 

finding an unlinked object

Posted: 06 Sep 2004 08:39 PM PDT

Hi Ken,

I've no idea! Try resetting the Gantt Chart view EXACTLY the same as when
you created the arrows - same timescale, same date, same tasks.


Mike Glen
Project MVP

microsoft.com wrote: 

OneNote: Add capability to IE to capture a web page in OneNote

Posted: 06 Sep 2004 04:19 PM PDT

Download the latest upgrades to OneNote. This will give you the capacity to
do Screen Clippings.
With OneNote open, all you have to do is press the Windows Logo button and
S. Drag what you want, and it will dump it into OneNote.

"Bill J" <Bill microsoft.com> wrote in message
news:com... 
some 
OneNote. 

How do I create a project without actual dates? (where every mont.

Posted: 06 Sep 2004 02:37 AM PDT

Using elapsed time will allow you to specify your task durations themselves
in terms of equal length 30 day months. The Gantt chart time scale though
is a real civil or fiscal calendar so its months are their actual lengths
even when you display the labels as months from start. If month 1 begins 1
Sep, month 2 starts 1 Oct and month 3 starts 1 Nov and the labels read Month
1, Month 2, Month 3. Since this is a proposal and the durations you list
are going to be very very rough order-of-magnitude approximations until you
develop the actual WBS anyway, does it really matter if the timescale months
are slightly unequal? Would using weeks instead of months in the timescale
solve the problem if it is?
--
Steve House [MVP]
MS Project Trainer/Consultant
Visit http://www.mvps.org/project/faqs.htm for the FAQs


"chrisnik" <microsoft.com> wrote in message
news:com... 
very 
of 

Week1, Week2...(from end)

Posted: 03 Sep 2004 01:09 PM PDT

Rod:
Thanks a lot! this worked fine. I had not considered that the week start day
would make a dofference.

In regards to you suggestions, I really appreciate it.
In reality, what I am doing is to lay-out a standard process where different
Departments are involved, so in fact I initiated the plan from start (as you
suggest) to find out what the standard timing would be every time the same
process is repeated. After I had all the tasks and lead-times figured out,
that's when I was switching the format so it doesn't go by dates but by weeks
before the main event, which is Pilot run (this is when I got the problem).
This way, every time someone follows this process, they know how many weeks
in advance they need to start and also when they need to do what. Until
today, this process was inconsistent and events happend as people
"remembered". You can imagine how bad the results were. Things are getting
better!
Thanks again,


"Rod Gill" wrote:
 

Enterprise Tasks Codes

Posted: 02 Sep 2004 04:12 PM PDT

Mark E --

I misunderstood what you meant by "Project Portfolio" in your original
question. I thought you were referring to the Project Center views. Sorry.

To answer your questions, only custom Project outline codes and custom
Resource outline codes appear as dimensions in the Portfolio Analyzer. If
you are using custom Project or Resource fields such as Text, Cost, etc.,
they will not appear. You must use custom Project and Resource outline
codes instead. Hope this helps.

--
Dale A. Howard [MVP]
Enterprise Project Trainer/Consultant
http://www.msprojectexperts.com
"We wrote the book on Project Server"


"Mark E" <com> wrote in message
news:Twn%c.123736$nbnet.nb.ca... 
Subscribe to: Posts (Atom)