Pages

Search

Windows 7 - Sorry

Windows 7 - Sorry

Sorry

Posted: 15 Feb 2010 11:11 AM PST

relic wrote: 

and forgotten

Who is Frank the Wank?

Posted: 15 Feb 2010 10:22 AM PST

Alias wrote: 
Who exactly are you trying to fool, fool? You're like a little boy who
when he closes his eyes thinks no one can see him.

You are a known and admitted liar, cheat, and a thief and a bigoted
atheist asshole POS loser who is afraid of me and unable to defend the
honor of his supposed family.
Oops!

Microsoft's new 'phone home' anti-piracy practice unacceptable, sayscritic

Posted: 15 Feb 2010 10:14 AM PST

On 15/02/2010 11:26 AM, Alias wrote: 

If people truly valued security and confidentiality, they would not be
using MS-Windows anything.

who is this lying sack of useless shit cody, aka alias?

Posted: 15 Feb 2010 09:56 AM PST

Frank <cum> wrote in news:4b7995f7$x-privat.org:
 

No. I was just describing the outcome of you 'OOPSing' all over the
place.
 

No. I just saw an opportunity to make fun of you, so I took it.
 

Failed 2nd grade math I see.......OOPS!! LOL!!......Moron.

And I see you *still* have c*m in your e-mail address....OOPS!!!! LOL!!!

(And still in your hair, your bowels, etc.....)

WinXP Pro to Student version Win 7 Ultimate

Posted: 15 Feb 2010 09:11 AM PST

relic wrote: 

Thanks everyone, I'll tell him he can get it ordered :o)

Laptop antitheft software

Posted: 15 Feb 2010 07:04 AM PST


"LSMFT" <com> wrote in message
news:com... 

If I was to steal your notebook, the first thing I would do would see if
there is a factory-installed recovery partition and use it to wipe your hard
drive and bring it back to factory condition. So much for the software.
I believe there are some that have anti-theft devices built into an on-board
chip that would prevent anyone from doing that, but if you ever forget your
password, you have to buy a new motherboard. IBM, maybe?
--
SC Tom

Windows 7 restore point disabled by administrator

Posted: 14 Feb 2010 06:06 PM PST


"Indrek Aavisto" <com> wrote in message
news:com... 

If you're on a Domain, check with your IT department. They have the Power.

look at how cody, aka alias lies...!

Posted: 14 Feb 2010 03:50 PM PST

Alias wrote: 
Who exactly are you trying to fool, fool? You're like a little boy who
when he closes his eyes thinks no one can see him.

You are a known and admitted liar, cheat, and a thief and a bigoted
atheist asshole POS loser who is afraid of me and unable to defend the
honor of his supposed family.
Oops!

Excel IT Pro Discussions Forum: In a formula is there a command to send text to the next line?

Feed2Mail notification - new post on Excel IT Pro Discussions Forum
Business owner? Manage your customer calls the smart way! 30 day trial for $1 with coupon code F2M65OFF
In a formula is there a command to send text to the next line?

I know how to do this when typing in excel however is there a formula to do this in the formula line?

So if the formula I currently have is:

=IF(ISBLANK('Copy from PLM'!D1),"",IF('Copy from PLM'!D1="1st","123 Easy St         San Diego, CA 99999       888.888.8888   877.888.8888 fax",IF('Copy from PLM'!D1="2nd","789 Easy St          San Diego, CA 99999            888.888.8888   877.888.8888 fax")))

If "1st" is entered in 'Copy from PLM'!D1 then result would be:

123 Easy St
San Diego, CA 99999
888.888.8888   877.888.8888 fax

instead of: 

123 Easy St         San Diego, CA 99999       888.888.8888   877.888.8888 fax

Dustin Shepard

Excel Help Forum - Excel General: Showing the increase in the value of a cell

Feed2Mail notification - new post on Excel Help Forum - Excel General
Business owner? Manage your customer calls the smart way! 30 day trial for $1 with coupon code F2M65OFF
Showing the increase in the value of a cell
I have data in cell A1 which is linked to an external source and is constantly updating with a new value, is there a formula or macro I can use to show me the increase in value within another cell, here's an example Cell A1 current value 100 auto updates to 180 after 15 seconds the result I want...

Excel Help Forum - Excel General: How to create a drop down menu/box

Feed2Mail notification - new post on Excel Help Forum - Excel General
Business owner? Manage your customer calls the smart way! 30 day trial for $1 with coupon code F2M65OFF
How to create a drop down menu/box
Hi Please help me in learning how to create a drop down menu/box in a spreadsheet. Thanks

Upgrading Std to Ent Edition - Microsoft Exchange

Upgrading Std to Ent Edition - Microsoft Exchange

Upgrading Std to Ent Edition

Posted: 08 Apr 2004 12:26 PM PDT

Are you talking about the technical installation, or the licensing? I'm
wondering the same thing, with the licensing.. I haven't even installed my
standard yet.. but looks like you have to toss it!

"Matt" <microsoft.com> wrote in message
news:1758501c41d9f$5d5b5a10$gbl... 

E-mail Delay Times

Posted: 08 Apr 2004 05:26 AM PDT

I am also wondering if we are still blacklisted out there
somewhere... Cause if a person replies to an e-mail sent
by someone onsite, we get that one right away. But if the
e-mail is a "new" e-mail sent to us from off site it
delays.




 
and 
the 
timestamps are 
problems 
block list 
listed for 
they could have 
it. They could 

Exch 5.5 - blocking mail with false address

Posted: 08 Apr 2004 04:31 AM PDT

"Robin C" <microsoft.com> wrote:
 

You cannot get exchange 5.5 to do a directory lookup and only accept
mails for matched addresses. For that little gem, you'll need the
current version of Exchange

Mark Arnold MCSA MCSE+M MVP, org
FAQ: http://www.swinc.com/resource/exchange.htm &
http:http://www.swinc.com/resource/e2kfaq.htm

Exchange 2003 8331 Error

Posted: 07 Apr 2004 11:59 PM PDT

As a work around you can reboot the box. This will allow the process to
begin again. It should stay up and running for a while and allow your users
to be stamped by the RUSS.

Definitely call into Microsoft Support to get the fix, however if it is
going to take a while before you can do that you can do the workaround.

--
Hope that helps.

-------------------------
Jaclynn Hiranaka
Enterprise Messaging Support

This posting is provided "AS IS" with no warranties, and confers no rights.
© 2003 Microsoft Corporation. All rights reserved.


"Chris" <com> wrote in message
news:phx.gbl... 
response. 
RUS 
being 
a 

Outlook 2003 Message-ID madness!

Posted: 07 Apr 2004 06:34 PM PDT

No, that's a fine answer. It pointed me in the right direction! Just seems
silly to remove something like that, even if it is technically optional..
how hard is a checkbox to enable/disable it? anyway, just ranting..

Since you posted that, I have been trying to make it work. I confirmed that
sending mail through myrealbox.com (my mail provider) with Outlook 2003
results in no message-id (already knew that!).

I setup the SMTP service on W2K. If I send the same message from outlook to
'localhost', it then relays it on, and in the process it DOES add the
message-id header. So, this could be a good temporary solution.

But, I would want the SMTP service to receive from my clients on port 25 as
usual, then forward the mail to my existing server which is on another port
on the LAN. It would continue to receive from the 'net on the WAN
interface. The 'smarthost' setting seems to work good for this and I can
set another port no problem. I just have to figure out how to make it send
on SSL.. this is because with my current server, I can set the port for SMTP
and SSL SMTP separately, and select which interface each is active on, but I
can't set different ports for one service on two interfaces. :(

Thanks for your help.

"neo [mvp outlook]" <mvps.org> wrote in message
news:phx.gbl... 
to 
anymore. 
MS.. 
an 
it's 
part 
is 
Only 
of 
service 
on 
s 
can't 
get 
message 
got 
are 
compliant - 
2003 
clients? 

Need help to stop relaying on exchange 5.5

Posted: 07 Apr 2004 01:31 PM PDT

Matt,

thanks for replying. I looked at IMS and 'always send notifications when
NDRs are generated' was not selected. We have selected 'multiple matches for
an email address has occurred' . I did google search and it seems your
right. It just so happens I downloaded trial of surfcontrol for web and
email filtering. Problems with spam has kept me from setting up surfcontrol.
Hopefully I'll have surfcontrol setup tmrw.

--will





"Matt" <com> wrote in message
news:1a60501c41d9c$34dfea90$gbl... 

Restore Public Folder

Posted: 07 Apr 2004 11:48 AM PDT

Hi willie:
I am having a simular problem like this. I have a tape back of the Public folder store, and I restored it to the originial place of the exchange server by the "Brightstore backup" from CA. For some reason, the exchange can not mount the public folder store any more. Is there anyway I can get the public folder back? Thanks a lot!

individual mailbox size

Posted: 07 Apr 2004 10:41 AM PDT

Interesting point about Outlook's performance.. a question in that regard..

when using Outlook with Exchange, aren't searches et al. processed on the
server, a-la client-server architecture? So, although it is 'relatively'
slower as the store grows, it should still be faster than an outlook client
with a PST file, right?

Thanks
Jason


"Alex Seigler [MSFT]" <microsoft.com> wrote in message
news:phx.gbl... 
mailbox 
rights. 

Exchange 2003 problem

Posted: 07 Apr 2004 01:25 AM PDT

Many thanks to you both. 
Contact Microsoft 
confers no rights. 
wrote in message 
attributes on new 
System Attendant 
other Exchange 
and confers no 
caught 
info on 
with no 

Upadate described in Microsoft Knowledge Base Article 817809 needed

Posted: 06 Apr 2004 11:10 PM PDT

I've tried to call support (in Russia) and the
conversation was the following:
Support: What is you product and what is the product
number
Me: I'm using trial version of Exchange and interesting
in buying ...
Support: Sorry, since support is not free, we do not
provide it for trial products
 
call in, and since 
calling support and 
know. 
confers no rights. 
specified at 
2003? 
our 
not 

Excel Help Forum - Excel General: How to change a template that is in many files

Feed2Mail notification - new post on Excel Help Forum - Excel General
Business owner? Manage your customer calls the smart way! 30 day trial for $1 with coupon code F2M65OFF
How to change a template that is in many files
Hi I have made a spreadsheet template that I "save as" many times with different names. ie:Sales - Jan , Sales - Feb , etc If I change a cell format in the template , is there a way I can do the same to all the other files without opening each file individually and changing it. Please...

Excel Help Forum - Excel General: Need to look up a name in one column and return a maximum value from the next...

Feed2Mail notification - new post on Excel Help Forum - Excel General
Business owner? Manage your customer calls the smart way! 30 day trial for $1 with coupon code F2M65OFF
Need to look up a name in one column and return a maximum value from the next column
I have a list of names of different people in one column. Their names occur more than once in the list. The list is not sorted alphabetically. In the next column are values for amounts they have spent on different occasions. I want a formula that helps me to identify the maximum value they...
Subscribe to: Posts (Atom)