Unexpected restart on dmesg | less scrolling - Forums Linux |
- Unexpected restart on dmesg | less scrolling
- Getting signal 15 after boot
- How to delete files/folders owned by nobody user on a web server
- Setting up a software RAID-5 file-serverbox: to ECC or not to ECC?
- SUSE 9.3 display problems after install
- two gigabit interfaces with Samba?
- Suse, nforce4 and sata drive.
- lvm: how to check the status
- Dial on demand
Unexpected restart on dmesg | less scrolling Posted: 27 Sep 2005 08:37 AM PDT Jody <rr.com> wrote: The question must be asked "wy do you ask that"? It has to read the code of less from SOMEWHERE, no? And it has to search SOMEWHERE to find that somewhere no? And the somewhere that it is searching is a file system on your faulty disk, no? Hence corrupt. Hence not in an expected state. And it has to place other stuff in SWAP, no? And that swap is where? Somewhere? Fix that. Peter |
Posted: 27 Sep 2005 03:32 AM PDT com wrote: Well, fix rpc.statd. Do you care? It's not going to be much use to you, I daresay! So what? Are you saying that your startup script is sensitive to errors? Well, then you either have to make the error go away, or don't bother starting rpc.statd, or make the startup script not care about any errors. Why are you running rpc.statd? Peter |
How to delete files/folders owned by nobody user on a web server Posted: 26 Sep 2005 11:42 AM PDT In comp.os.linux.setup DB2 Knowledge Base <com>: That's simple but needs root permissions to setup once, just make those users member of an additional group, set SGID (chmod) bit on the top directory and make it owned root.<additional_group> with write permission for the group. -- Michael Heiming (X-PGP-Sig > GPG-Key ID: EDD27B94) mail: echo qr | perl -pe 'y/a-z/n-za-m/' #bofh excuse 389: /dev/clue was linked to /dev/null |
Setting up a software RAID-5 file-serverbox: to ECC or not to ECC? Posted: 26 Sep 2005 05:30 AM PDT Thanks! It's not so much a desktop but a dedicated file server for a combined household of a couple of people. And yes, I am talking about SATA. I'm currently thinking of housing the entire array in a separate tower and just bundling the wires back into the actual server. That'll allow for much better airflow throughout both the server and the HD-tower. Anyway, thanks for your advice! |
SUSE 9.3 display problems after install Posted: 25 Sep 2005 07:26 PM PDT "Enrique Perez-Terron" <no> wrote in message news:home.lan... I'm afraid not. Uninstalling the OpenGL libraries breaks *LOTS* of dependencies, such as OpenOffice. I count 642 dependencies rooted in xorg-x11-Mesa-libGL alone on a FC4 box. And if you've deleted them, the NVidia installer detects the missing files and silently fails to install its own libraries. It's an *AMAZINGLY* complex, and fundamentally stupid, installer, forced to do odd things by NVidia's decision to keep its libraries and driver secrets very secret indeed. |
two gigabit interfaces with Samba? Posted: 25 Sep 2005 05:09 PM PDT "Lars Müller" <com> wrote in message news:com... Ahh. Dual hosting. You were having problems with "ping", though. Solve that problem first. So you want to plug eth1 in, and have it be another IP address on the same subnet, right? Were you intending to make the Samba server show up as two distinct servers, and each serve different content? If not, don't bother. Since the IP addresses are on the same subnet, the Samba server will try to report both of them as the same server name unless you get very cute in your setups, and cause all *SORTS* of interenting interlocks between IP addresses each pretending to be the same server and sharing the same file locking and file accesses. However, it should be possible to add the second IP address and run *OTHER* high bandwidth services from the other addresses. If you run heavily used NFS or HTTP or FTP or DNS services, putting them on another IP address and separate 100BaseT network seems reasonable. If eth1 is physically working, it should be possibly to duplicatge /etc/sysconfig/network-scripts/ifcfg-eth0 to ifcfg-eth1, edit it appropriately, and restart your network with the init script to see if the other port works correctly. |
Posted: 24 Sep 2005 10:33 AM PDT Well, the Grub bootsplash looks nicer :) Seriously, I rather like 10 - I'm currently running RC1 on a Dell laptop and on a three desktops. Just installed it to a friend's machine yesterday, which was about a 6-click install. It automagically detected everything: sound, video, mouse, network ... on one of these $197 Fry's no-name AMD boxes (came pre-installed with Linspire, which we promptly tossed). They also installed eXPensive and had a heck of a time getting the sound and network up and running. Anyway, RC1 is my primary boot-to version, preferring it to the 9.2 and 9.3 installs I have available. Even considering it's an RC1 release, I think it's "ready". |
Posted: 23 Sep 2005 01:20 PM PDT com wrote: It's not "dead info"! Will you cease blaming other people? Other people (like myself, and the others who are explaining the obvious to you) have no trouble in understanding that /proc/lvm provides info WHEN IT IS THERE, something which depends on a multitude of (obvious) things. Peter |
Posted: 22 Sep 2005 10:33 PM PDT Moe Trin wrote: [snip] Thanks for the really useful reply, Moe. Sorry about the delay in responding, but it took me a while to carry out the test you proposed. /etc/resolv.conf just has two nameserver lines for the IP addresses of the DNS servers that my isp gave me. This is what tcpdump showed - '11:45:15 IP 155.239.110.127 > 224.0.0.22: igmp v3 report, 1 group record(s)' The first address is the one that my ISP dynamically assigned to me. According to what I have read, the second address is a multicast address. Here is a quote that I found - 'IGMP (configured on a router) periodically sends out IGMP general queries. A host responds to these queries with IGMP membership reports for groups that it is interested in.' I am not using a router. It is a plain FC4 box, not connected to a lan, with a modem for dialup to the ISP. It is running IP-Masquerading, which I have set up according to the latest HOWTO, as I want to use the machine as an internet server for a small lan. The HOWTO gives details of two firewall setups - one very simple one for testing, and one much stronger one for the real world. At this stage I am using the simple one. Let me know if there is any other information I can provide. Any assistance will be much appreciated. Frank Millman |
You are subscribed to email updates from TextNData Forums - Linux To stop receiving these emails, you may unsubscribe now. | Email delivery powered by Google |
Google Inc., 20 West Kinzie, Chicago IL USA 60610 |