Pages

Search

How can I track internal email by source IP or Hostname? - Microsoft Exchange

How can I track internal email by source IP or Hostname? - Microsoft Exchange


How can I track internal email by source IP or Hostname?

Posted: 04 Apr 2006 10:20 AM PDT

If that is the case make sure your AV software is up to date,
Set a network scanner or sniffer somewhere and sniff the network to see which
Work station is causing the problem,
Ethereal is free, Nmap is free, or get some nice graphical user sniffer to
Determine what kind of packets are traveling and which work station is the
naughty one.

Cheers
oz

--
Best regards, Good Luck
Oz Ozugurlu
____________________________
MCSE 2003 M+,S+, CCNA
Http://www.msexchange911.org
Http://www.consultusa.us (Blog)


"Ryan" wrote:
 

Unblock an email in IMF

Posted: 04 Apr 2006 10:09 AM PDT

I am sure they are there. Looks like they were there for couple of weeks.
Is there any manual way to deliver them?
Sn

"Mark Arnold [MVP]" <org> wrote in message
news:com... 


Relay

Posted: 04 Apr 2006 09:26 AM PDT

thanks that pointed me in the right direction.

"Paul Ford" wrote:
 

Can I Recover Old Mail from Log Files and Information Stores?

Posted: 04 Apr 2006 07:40 AM PDT

Thanks, Paul. That's what I figured, and what I'll probably start doing
today, but I'm still hoping for a magic answer. :-)

"Paul Ford" wrote:
 

How to remove OWA Server from Organization

Posted: 03 Apr 2006 07:21 AM PDT

Thanks for the tip!
--
Thanks


"Bharat Suneja" wrote:
 

disable an application try to use your client.

Posted: 03 Apr 2006 06:36 AM PDT

On a side note, how come I can post a reply in the technet newsgroupsd but
after signing in, I can't start a new message/thread

Cannot backup exchange

Posted: 01 Apr 2006 07:22 AM PST


I have just tried running isinteg.exe

isinteg -s <servername> -fix -test alltests


It completed but the DOS window close after it ran so i don't know if it
tried to fix anything.
It STILL has the same error when trying to backup!!

Mal
"Mal the evil IT manager" wrote:
 

Webdav Put 200

Posted: 31 Mar 2006 07:00 AM PST

"Yahya" <x@x.x> wrote in message
news:phx.gbl... 
Folder to 
Put 
sucessfully 

You may be getting the 200 status if the server has FBA enabled, and
is just returning the FBA logon page to your application.

Lee.

--
_______________________________________

Outlook Web Access For PDA , OWA For WAP
www.owapda.com
email a@t leederbyshire d.0.t c.0.m
_______________________________________


How do you keep from being black listed?

Posted: 31 Mar 2006 05:44 AM PST

I would guess that you are being reported by the recipients of your e-mail.
Make sure that there are removal instructions that are VERY clear in the
text of your messages (preferably at the top of the message). Having your
own email server will not help because someone will just blacklist your
domain.


--
Jim McBee
Blog: http://mostlyexchange.blogspot.com
Free eBook: http://nexus.realtimepublishers.com/ttgsm.htm



"Just Guessing" <microsoft.com> wrote in message
news:com... 


Unable to remove Exchange 5.5 server from 2003 domain

Posted: 30 Mar 2006 08:56 AM PST

We have tried that and we still cannot remove it. Did some more research and
we have decised that we are going to use ADSI edit to remove the entries.


"Mark Arnold [MVP]" wrote:
 

Journaling Public Folders

Posted: 30 Mar 2006 06:00 AM PST

Hi,
Thanks for your suggestion. EMC's EX is only archiving mail from mailboxes
I specify. All journaling is being handled by the exchange servers as
defined in the Mailbox Store's General tab. Unfortunately the option to
"Archive all messages sent or received by mailboxes on this store" is not
available for public folder store containers. Checking smtp protocol options
hasn't yielded anything encouraging either. As Exchange is responsible for
all mail traffic, I am hopeful that there is some facility for journaling
pf's within the standard framework of exchange. I'd rather not have to code
this. Thanks again.

"Mark Arnold [MVP]" wrote:
 

[fake from] behind email subject

Posted: 30 Mar 2006 05:28 AM PST

Yes this is from my internal users, and yes I do have an incoming smtp relay
in my perimiter.
And I started to use spamcop because I had a spam attack last week.
Can you help me to get these [fake from] subject out of my exchange
enviroment.

thank you for all the comments



"Jim McBee [MVP Exchange]" wrote:
 

IIS General Question

Posted: 30 Mar 2006 01:56 AM PST

The reason for posting in this group, was that this is where I found the
solution to my owa IIS problem. I was hoping that the people with the
expertise to solve the initial problem might also be able to shed some light
on the others.
I was asked to install PHP and Mysql on the server by a developer. After
doing research it appeared that it was possible to run these two parallel
with IIS.
With hindsight, I will now use Apache to run php and Mysql, but all I would
like to do is get the server back to the way it was before the blunder.

thanks

"Mark Arnold [MVP]" wrote:
 

"Send As" Outllok Config & Exchange

Posted: 29 Mar 2006 09:56 PM PST

Thanks Mark, I'm all set!!!

"Mark Arnold [MVP]" wrote:
 

Message size limits / exceptions for users

Posted: 29 Mar 2006 12:39 PM PST



"Mark Arnold [MVP]" wrote:
 

So I have to set a high global limit then go in and edit all of the other
users for the lower limit? That seems backwards to me. Wouldn't it be easier
the opposite way? I have a greater number of users who need a lower limit not
a higher limit. Thank you for the response. Is there another way to achieve
my desired results?

Sharing a calendar with someone outside the company

Posted: 29 Mar 2006 06:00 AM PST

Hopefully, this will help you:

Outlook tutorial: publish your calendar online
http://www.bcentral.co.uk/technology/software/tutorial-publish-outlook-calendar-to-web-online-diary.mspx

--
James Whelan

Rapid Response Engineer - Messaging
Premier Field Engineering
Microsoft United Kingdom

Please do not send e-mail directly to this alias. This alias is for
newsgroup purposes only.

This posting is provided "AS IS" with no warranties, and confers no rights.

--


"Transam388" <microsoft.com> wrote in message
news:com... 


Exchange 2003 SP2 event 7518 Sender ID must be configured

Posted: 28 Mar 2006 01:05 PM PST

7518 means that the IMF updates are not working. Check to see if the
IMF updates are being updated every time Windows Update finds a new
one. IMF would still work in such a scenario. But the future updates
wouldn't get detected.

http://support.microsoft.com/kb/907747/en-us

you can use the above mentioned KB as a guideline as to how to deal
with this.

Regards
Randy

Deploying SENDER ID with SP2

Posted: 28 Mar 2006 12:29 PM PST

OK. It's working do I need to add ip perimenter for each Canon printer
email-printing-scanning (this is a feature with canon printer to scan the
pages and then send it automatically by email in an attachment of pdf). And
also do I need to add virtual smtp for the ip of each canon printer we have.

Thanks,
Ricky

"Bharat Suneja" wrote:
 

License / Product Key Missing

Posted: 28 Mar 2006 05:00 AM PST

Thanks Lanwench!! I'll give it a shot.

"Lanwench [MVP - Exchange]" wrote:
 

Word as a Text Processor in Outlook w/ Exchange

Posted: 27 Mar 2006 01:36 PM PST

Yes, you're right (once again). the versions are different : Word 2002 and
Office 2003.

OK, I'll fix that...
Regards
NIcolas


"Lanwench [MVP - Exchange]"
<donotsendme.unsolicitedmail.atyahoo.com> wrote in message
news:phx.gbl... 


Change Name in AD Users & Computers issue

Posted: 27 Mar 2006 01:32 PM PST

You may also want to change the Exchange Alias value in ADUC. The alias
will still work as the old name if you don't. Meaning, in Outlook, your
users can still type:

jane.jones to get her old name/address
when you've changed the EMAIL address to com

JMR
<org> wrote in message
news:com... 


Sending on behalf of a distribution group??

Posted: 27 Mar 2006 11:50 AM PST

Have a look at SetFrom utility:

http://www.ivasoft.biz/setfrom.shtml

Regards,

Victor Ivanidze
software developer



"Ron" <microsoft.com> ÓÏÏÂÝÉÌ/ÓÏÏÂÝÉÌÁ × ÎÏ×ÏÓÔÑÈ ÓÌÅÄÕÀÝÅÅ:
news:com... 


Exchange 2003 event id

Posted: 27 Mar 2006 07:36 AM PST

Hi,

Nothingn changed, all groups still in the same container.

Forward Email from domain to a distribution list.

Posted: 26 Mar 2006 08:54 PM PST



In news:com,
jay7717 <microsoft.com> typed: 

If you want com to go to a specific person or group, check
out the link I provided. Or have I misunderstood what you're trying to do?
 


Microsoft Word - Page Formatting

Microsoft Word - Page Formatting


Page Formatting

Posted: 27 Feb 2014 03:13 PM PST

I have  Office 2010 and recently I have had trouble formatting page numbers to word documents.  When I attempt to insert page numbers, this is what I get: Page {PAGE} of {NUMPAGES} and I am unable to change it.  I don't remember hanging anything in the "format" section. 

Additionally, when I attempt to copy/paste from a website into a word document I get this: {HYPERLINK...}  and then I have to physically right click to remove the hyperlink.

 

Please help.

when trying to save in word 2013 do not get a box for file name -can anyone help getting the normal place to enter a file name

Posted: 27 Feb 2014 02:53 PM PST

when trying to save in word 2013 or excel 2013 with office 2013 pro plus & windows 7 64 bit I do not get a box to place a file name. This would be the normal box that you usually place the name  -can anyone help getting the normal place to enter a file name I have deleted office and re-installed and still no place for file name.

I started Word in safe mode and did a test and tried to save but got the following error:

Word cannot start the converter SSPDFCG_x64

Any help would be greatly appreciated. Thanks 

Why aren't tabs imposed in text then reflected in the "column" of status bar?

Posted: 27 Feb 2014 02:44 PM PST

The cursor position as per the column indicator of the status bar does not take into account the use of tabs imposed in the text.  For years I have designed my probate estate inventories with the figures lined up correctly, but there is absolutely nothing I can find in my new word software that gives me an accurate and consistent indication of exactly where the end position is of my figures.  I put the cursor at one position in the text, and it says one thing.  Then I go to another line of text and place my cursor at where it looks like the same position, and the crazy column position is vastly different.  It makes no sense ... ???  The only rationale I can give to the distinction is that I have used the tab function to advance over in certain lines, and not in others.  But the column position indicator on the status bar does not take the tab advancements into effect.  Perhaps my formatting design is not what the Word designers prefer?

show line and column in bottom ribbon

Posted: 27 Feb 2014 02:07 PM PST

Good day, all -

I would like to see column and line information in the bottom ribbon.

How do I go about having this information automatically shown?

Word 2013 won't open any files, even ones it creates.

Posted: 27 Feb 2014 01:55 PM PST

I have Office 2013 on my computer which runs windows 7, and whenever I try open any file on my computer in any office program it says "File is not avaliable" or a similar statement. I have uninstalled and reinstalled. I've checked my anti-virus, I've Gone through all the trust center settings and even added a registry file. Nothing has worked, please help me...

The files I've tried to open are just regular files created with office 2010 software, from the Documents folder on my laptop.

¿por que al instalar office 2013 plus me dice que esta sin licencia y al meter la clave no la acepta y tampoco mi correo?

Posted: 27 Feb 2014 01:27 PM PST

no me deja meter clave y me pide correo pero no lo acepta que puedo hacer ya lo desinstale y lo volví a instalar y me dice lo mismo 

MS Word macro: How to select specified menu ribbon

Posted: 27 Feb 2014 01:08 PM PST

Is it possible for a word macro to select a specified menu ribbon?

Scenario:

I open an embedded document and want the opened embedded document to automatically navigate to the REVIEW menu ribbon.

Thank you,

MissPeri

Linked Excel Charts Slows Down Word Opening/Closing

Posted: 27 Feb 2014 12:57 PM PST

I created a series of linked excel charts/cell ranges to place into a single word document. There are typically anywhere between 50 and 100 links in the file and the issue that has come up is: the document takes a long time to open (over 2 minutes) because Excel opens every Excel file referenced in the Word doc.

The links were placed into the word document via: Paste Special -> Paste Link -> Microsoft Office Excel Chart Object (or Microsoft Office Excel Worksheet Object)

I had found a solution online that essentially was adding two registry keys: DelayOleSrvParseDisplayName and NoActivateOleLinkObjAtOpen. This solved the issue of speed (opened instantly) without opening every instance of Excel.

The issue that this brought up however was for some charts/objects, the link was broken/not found for reasons I can't figure out (the source file was not moved/renamed or anything of the sort). And for the links that were not broken, updating certain charts resulted in distortion of the horizontal and vertical axes to point where they were unreadable.

I was wondering if anyone knew of a fix either using these two new registry keys or a fix without them to increase speed of opening the documents and ease of updating.

Thanks in advance.


Random de-spacing throughout documents when transitioning between Word 2010 and Word 2007

Posted: 27 Feb 2014 12:24 PM PST

I'm editing a book.  The files are shared/passed via DropBox, with which we've never had issues.

The difference between the two computers is one machine uses Microsoft Word 2007 while the other uses Microsoft Word 2010.  A chapter will appear edited to perfection on one computer then appear on the other computer filled with new errors.

The errors made in transition are these:

--Spaces between periods and beginning of the next sentence disappear.  Example:

Do you like green eggs and ham? Would you eat them in a box?  becomes Do you like green eggs and ham?Would you eat them in a box?

--Spaces around most proper names.  Example:

Jack Sprat could eat no fat  becomes  JackSpratcould eat no fat.

--Seemingly random space removal between words in the middle of a sentence.

Solutions?  Or are Microsoft Word 2007 and Microsoft Word 2010 simply incompatible?

Blank lines in outlines? (MS Word 2013)

Posted: 27 Feb 2014 10:17 AM PST

I'm making an multilevel outline.

I want to have a blank space between each First Level Group.  I know I can use a "soft return," but I'd like to build it into the outline style.

How?

Example of what I'm trying to accomplish:

1.  Blah blah blah

     a. etc. etc.

     b. etc. etc.

BLANK LINE HERE AND ONLY HERE BY DEFAULT PLEASE!!!

2. Blah blah blah

     a. etc. etc.

     b. etc. etc.

Thank you.

For Word 2010, can you advise on how to use field codes within a formula.

Posted: 27 Feb 2014 09:50 AM PST

For Word 2010, can you advise on how to use field codes within a formula.

I put a section break and restarted numbering after the main section of the report, and am trying to get a cumulative page number for the main report and a subreport following the main report. 

I  am trying the formula:

{= {PAGE} + {PAGEREF MainEnd} }

where MainEnd is a bookmark on the last page of the main report.

I want to have two page numberings - one for the entire report, and another for a subreport following the main report.

Can anyone help me?

Moved from Community Participation

Original title: *** Email address is removed for privacy ***

Timer

Posted: 27 Feb 2014 09:49 AM PST

I want to show a timer on a Word page during my speech.  Is this possible?

Office 2013 Home and Business

Posted: 27 Feb 2014 08:41 AM PST

Through a 4 tech support person arduous process, it was found, last October 2013, Office 2013 did not offer, in the print dialog the option: Print what? "Document showing markup."

Printing a final document showing vertical change lines - denoting the changes - was impossible. The document displayed would be correct with only the desired information - with the change lines on the side margin. The printed version would print everything that had been in the document and everything that was added.

As a result, the document was longer with each page displaying everything. Individual pages would flow onto the next page resulting in an unusable document.

Has this been corrected and updated for users of Office 2013?

if this works, I will post a screen shot of Office 2007 showing the print dialog box with the option (which was/is missing from Office:

The following is the current setup for showing where any content was changed:

Currently, I have a very small $240 paper weight consisting of an unused Office 2013 program.

Replies appreciated.

Cal B. Twitty Sr

Select Entire Column (Word)

Posted: 27 Feb 2014 08:32 AM PST

In previous versions of Word, there used to be a keyboard command to select an entire column in a table. In 97, it was something like Right Click+Shift (I think), and in later versions, it was something more complex that I could stumble across with enough pecking...

But now, in 365, it seems that the only options are Shift+Alt+PgDn or Shift+Alt+PgUp. Both of those only select the column from the point of the cursor... In other words, if you're halfway down your table, you need to scroll to the beginning or end to select the entire column.

Is there a way to do it "the old way" - that is, regardless of where the cursor is in the table, you can select an entire column?

(And, yes, I recognize that the time and effort to come to this website, figure out my password, and type this post is probably greater than the time and effort it will take for me to scroll around the next five years' worth of tables, but...)

Microsoft Word 2013: Page Number

Posted: 27 Feb 2014 08:04 AM PST

I'm now working on a word document. The first page of my document is my cover page; follow by the 2nd page, the content page and the rest, started from the 3rd page onward is my document content.

Here's the problem, I wish to make page number, starting as number 1 for the 3rd page and onwards. I wish not to see any page number, I mean nothing at the header and footer section of my 1st and 2nd page of document, but only page number 1 for my 3rd page and onwards.

How? I tried using the "different first page" option, but that doesn't seem to fix my problem at all. Pls feedback to me with a detail step-by-step guide.

Thank you.

Word 2010 - Nested styles ?

Posted: 27 Feb 2014 07:29 AM PST

Hello there,

I'm not sure the word "nested" is appropriate and I'm pretty much already convinced there is no built-in solution for my problem but I'm asking it anyway -- out of curiosity at least.

Here is the situation : I use styles a lot in Word and find them very useful to get a good and automated page layout. In particular, I have a style for regular body text and another one for bullet lists. It works great but I'd like to define a new syle 'on top' of theses two to define a specific background color (in order to highlight some parts in a document).

It would need to be a block style since there are some paragraph breaks in my block, thus I need to activate the "keep paragraphs together" option -- sorry if it's not the correct translation, I don't work with the English version of Word -- otherwise there would be some blanks in the background between the lines with a inline style. The trouble is such a style would override the existing styles (Body text and List paragraph in my example) and break my page layout.

Therefore, I was wondering if some kind of "nested" styles does exist in Word ? This way, I could define a top-level block style for my background color and second-level block styles for my body text and bullet lists that would override only specific settings of my top-level style.

But I've never seen such a feature in Word and I guess it's not possible because that would mean to have 2 different styles attached to the same element.

EDIT : the result can be achieved by using a single cell table and putting my block inside. I'm still interested in the "style way" because it would allow me to easily identiffy these blocks throughout the whole document.

Any help or advice would be much appreciated :-)

Thanks for your time !

space between figures in the List of figures) using word 2010

Posted: 27 Feb 2014 07:24 AM PST

I added a list of figures to my report but they look very close so I want to have a space between:

what I have now is:

Fig.1 aaaaaaaa

Fig.2 bbbbbbb

Fig.3 ccccccccc

what I want is:

Fig.1 aaaaaaaa

Fig.2 bbbbbbb

Fig.3 ccccccccc

I did add the space manually but when I update the table it goes back to the no space format.

Any Ideas?

Ahmad

QuickPrintSelection

Posted: 27 Feb 2014 06:52 AM PST

Hello,

 

Is there a macro that I can write which does a quick print on text that I highlight?

Word 2013 docx document not showing the same formatting in Word 2010

Posted: 27 Feb 2014 06:24 AM PST

I have read on so many sites that a docx document created in Word 2013 will open in Word 2010. Well, it will open but the formatting will NOT be maintained in exact form. If anyone would like to help out with this issue please reply to this discussion. I have documents that must be used by many different companies and all of them do not have Office 2013, in fact most of them either have Office 2007 or Office 2010 with just a very few now have upgraded to Office 2013.

The documents we create are very complex in nature with many drawings, graphics, tables and, text boxes as well as using 2 column formatting for textual content.

Save As Pop-Up Window in 2010 has reverted back to the 2007 look - how do I get it back?

Posted: 27 Feb 2014 05:35 AM PST

this is the most annoying issue ever. All the other Save As pop-up windows in Outlook, Excel, etc are fine - but the Word pop-up has reverted back to the 2007 version limiting my functionality and productivity. How do I get it back?

MSOSQM.EXE- Application Error

Posted: 27 Feb 2014 04:59 AM PST

I received the same error over and over again when trying to run Office word 2013. What does this mean, The application was unable to start correctly (0xc0000043). Click OK to close the application. At the top of the box is this MSOSQM.EXE- Application Error.  I haven't tried to open any other office products yet as I have not needed them.

Word 2010 Spell Check Ordinal Issue

Posted: 27 Feb 2014 03:14 AM PST

I work on a helpdesk and a user has reported a strange spell checking issue which seems to be related to ordinals. Here is a screen shot below:

Even though the text after the ordinal is misspelt, it is completely ignored. It doesn't matter what the text is, as long as it appears after an ordinal (superscript or not) it will be ignored. Other misspelt words that are not after ordinals are detected as expected.

The user is in a Citrix Windows 2008 R2 environment and is the only one experiencing the issue. I have looked at the various options regarding ordinals, auto correct, etc, but I am unable to replicate the issue. Because of the environment I am unable to repair the install as it is server based and clearly works for other users on the same server. I have tried running Word in Safe Mode which resolves the issue but is not a permanent fix.

I have searched this forum and Google but have not found anyone else reporting the same issue. Does anyone know how I may resolve this?

Yes, but how do you turn it on?

Posted: 27 Feb 2014 01:44 AM PST

That's how I feel right now. 

I use Microsoft Word 2010 on a Windows 7 platform.  Everything has been fine with the Word program for a very long time.  Recently I opened it and noticed a change.  Here's what's going on:

The FILE tab to the far left is highlighted and is now the default instead of HOME (second from left).   If I want to, say, add Bold, I have to click on HOME then Bold.  Then, as soon as I do that, the darn thing defaults right back to the FILE tab.  It's driving me nuts.  Every time I want to set some parameters for a page, I now have to keep jumping back to Home first, then make one change, then do the whole thing again for the next change I choose.  

I've run through the Help files, played around with everything I could find and--no luck.

So, yeah, right now I feel like this is a truly dumb question like, "Yeah, but how do I turn it on?"   Know what I mean?

Can somebody, anybody, tell me how the heck to get my HOME tab back to the default so that puppy sits there forever unless I decide to change it?

I wouldn't mind defaulting the line spacing from 1.5 to 1, and end the "add a line" at the bottom of that command either.  And, come to think of it, the Font and Size, too.  Okay...I'm done dreaming now.

Thanks to anybody who can help me out with this...

Kay W.

microsoft word

Posted: 26 Feb 2014 11:49 PM PST

i am using microsoft word 8 and i cannot access microsoft word it only provides wordpad.....how can i access microsoft word my laptop is new...i have a microsoft account

This app can't run on your PC

Posted: 26 Feb 2014 04:49 PM PST

Related to: Cannot find Office (or other applications) Installed on Windows 8 / 8.1

Ok so I have a Toshiba laptop that I got in 2011-ish.

I just got Microsoft Office 365 Home Premium 12/25/13 and installed it last week. Before now I never used it because I didn't know where to find it. Figured that out today so now it's pinned to start. Now my problem is that every time I try to open a new Word document it asks how do you want to open this file? and I look on the menu for Word but it's not there. I've tried Notepad and stuff but I need Word for school. Is there anything I'm messing up or need to do?

Plus when I click on the app pinned to the start screen it takes me to the desktop but no windows open at all.

*Do I need to upgrade to Windows 8.1?*

New to Microsoft

Posted: 26 Feb 2014 04:38 PM PST

Good Morning I just need to ask how to start using office 2013.  I have followed the instructions but seem to be lost, I am also not familiar with using microsoft I depend on the information given, I am very much a new user.  I normally have to ask my 12 yr old niece for help.  I am trying to write a cover letter and resume.  I would appreciate some help or direction.  I also noticed that there are charges, I don't know how this works.  Sorry for being such a pain.  

Activation Issues - Microsoft Office forums

Activation Issues - Microsoft Office forums


Activation Issues

Posted: 29 May 2006 09:49 PM PDT

Thanks! I suspect I have OCD - LOL. I have a morbid fear of having strange
registry entries lurking around my squeaky clean computers from failed
installations. Unless I am certain about the outcome, I'd much rather stick
to what I already have, which is running as smooth as syrup now.

Thanks all the same!

Ram

"SteveC" wrote:
 

No Product Key for Office 2003

Posted: 29 May 2006 07:46 AM PDT

The Magical Jelly Bean only finds your Windows Key, Belarc will find the Office
key.
http://www.belarc.com/free_download.html

--
Mary Sauer MSFT MVP
http://office.microsoft.com/
http://msauer.mvps.org/
news://msnews.microsoft.com

"Ram" <microsoft.com> wrote in message
news:com... 


How do i lock down my system's configuration?

Posted: 29 May 2006 06:54 AM PDT

Milly is correct, However I will give you a brief hint. If you are the
Administrator of this machine create them a guest account and password
protect your admin account. then go to your group policy editor and assign
them the right s you want them to have under the guest account you created
for them. But really the best place to find your detailed answer is in the
windows XP Discussion Group

http://www.microsoft.com/windowsxp/expertzone/newsgroups/reader.mspx?dg=microsoft.public.windowsxp.security _admin&lang=en&cr=US

"Milly Staples [MVP - Outlook]" wrote:
 

Continuing Office problems

Posted: 29 May 2006 06:44 AM PDT

These are the problems for each program:

Word, Powerpoint, Excel, Access, and Outlook all display the problem
"program has not been installed for the current user, please run setup to
install the application"

Infopath does not open at all saying that it has encountered a problem and
needs to close.

Finally Publisher displays the message "publisher cannot load the required
file (PTXT9.DLL) you may be out of memory, or the file may be corrupt."

i looked at the event viewer and only the infopath error is shown, this is
what it says:
the type is error, source is Microsoft office 12, category in none, event is
1000, and the user says N/A (does this mean something it should be installed
for my user account)

when i went on properties this is the description:

Faulting application infopath.exe, version 12.0.4017.1004, stamp 445520e4,
faulting module unknown, version 0.0.0.0, stamp 00000000, debug? 0, fault
address 0x00000000.



"mstout2001" wrote:
 

Office 2000 Validation

Posted: 29 May 2006 04:21 AM PDT

If Office is not shown in add/remove, the installer cleanup utility doesnt
find it, then it would appear that Office is not installed.
If the Office cd doesnt autorun, with the cd in, use explorer to browse the
cd then double click the setup file.
Office 2k, at least early versions, did not require activation so I'm unsure
whether the validation tool works on Office2k

"Darryl" <microsoft.com> wrote in message
news:com... 
doesn't 
and 
that 
as a 
failed 
do a 
had 
still 
was 
get 


Installation not starting

Posted: 28 May 2006 08:03 PM PDT

Take it to a paid technician and have it check it.

And just because it's working fine one day doesn't mean it can't die the
next.

--

JoAnn Paules
MVP Microsoft [Publisher]



"Dave" <microsoft.com> wrote in message
news:com... 


Visual Studio Tools for Office causes errors in Office 2007 beta 2

Posted: 28 May 2006 07:02 PM PDT

Oh, I'm not so sure JoAnn. Many of your posts are so insightful that they
verge upon prescience.

What I meant, of course, was that the Office 2007 setup might warn users to
uninstall a tool that won't function with the new version.

Hope your weekend was nice.

Mike
--
Michael A. Reeds, M.D., Ph.D.


"JoAnn Paules [MVP]" wrote:
 

Outlook 2003 pst file

Posted: 28 May 2006 06:48 PM PDT

Assuming earlier format pst do not import, simply open the data file in OL

"Frances Mullane" <net> wrote in message
news:Kpseg.52194$bellsouth.net... 


an error encountered during setup OPPLUS-EN

Posted: 28 May 2006 01:12 PM PDT

hi i did what you suggested, and the same thing happened over again

"mstout2001" wrote:
 

"New Office Document" Shortcut MIA Office 2003

Posted: 28 May 2006 09:30 AM PDT

zwhen you install office 2007 beta it tells you it will remove the office
2003 program and its files. You clicked yes and got Office 2007. When you
uninstalled the program it took out the programs and extension that you used
to create a new document. You have two choices. Reinstall your office 2003 or
Reinstall the Office 2007 beta. But that is what happend. I know for it
happend to me but I realized why sooner than later
matt

"garfield-n-odie [MVP]" wrote:
 

Microsoft Word - MS Word macro: Using varible for Windows("filename 123.doc").Activate

Microsoft Word - MS Word macro: Using varible for Windows("filename 123.doc").Activate


MS Word macro: Using varible for Windows("filename 123.doc").Activate

Posted: 26 Feb 2014 02:51 PM PST

Is it possible to use a true variable for Windows("").Activate?

Currently  I have Windows("filename 123.doc").Activate

however this macro needs to be used on several files.

I need the Windows("").Activate to accodomate so that I don't have to change the name for each file.

Accelerator (or Macro) to automate creation of new AutoCorrect entries in MS Word 2010?

Posted: 26 Feb 2014 02:50 PM PST

Hello all.  I searched through the FAQs and other info here and found plenty of useful tips (thanks!) but here is something I would like to find: code for an Accelerator or macro to quickly enter AutoCorrect entries on the fly.  I am a government worker (yeah, I know...) and use hundreds if not thousands of acronyms.  I've tried various add-ons and utilities (RoboType was my favorite) but now we're prevnted from running additonal programs on the government PCs.  I can still do macros and such, though.

Has anyone created something like this:  You are reading a document and run across a phrase you want to store as an AutoCorrect entry.  You highlight the text you want to keep, for example, "U.S. Government (USG)" and either right-click for a contect menu action or hit a defined macro key.  That would trigger an action to automatically bring up and populate a new AutoCorrect definition, let you make final adjustments, and have you enter the 'trigger text'.  I tend to use the character ` followed by the acronym such as "`USG".  After that I can simply use `USG if I want to type the phrase "U.S. Government (USG)" into a document.

I've assigned a hot-key to bring up the AutoCorrect dialogue and that works OK.  It's rather trivial to do.  But it would be very nice to take this one step further take highlighted text and have it automatically populate the field for a new AutoCorrect entry.  An Acceleartor that worked when right-clicking highlighted text would be awesome, too.

Thank you.

/Sam/

MS Word macro: Opening then closing embedded documents

Posted: 26 Feb 2014 02:43 PM PST

I am having difficulty creating a macro (via MS WORD) opening and closing an embedded document. I am able to open an embedded document but am having issues closing the embedded document.

Current code:

Sub Macro1()

'Navigates to file containing "File:"   

   Selection.Find.ClearFormatting
    With Selection.Find
        .Text = "File:"
        .Replacement.Text = ""
        .Forward = True
        .Wrap = wdFindAsk
        .Format = False
        .MatchCase = False
        .MatchWholeWord = False
        .MatchWildcards = False
        .MatchSoundsLike = False
        .MatchAllWordForms = False
    End With
    Selection.Find.Execute
    Selection.MoveRight Unit:=wdCharacter, Count:=2
    Selection.MoveRight Unit:=wdCharacter, Count:=1, Extend:=wdExtend
'Opens embedded file
    SendKeys "+{F10}+O+O"

End Sub

Word 2010 When Macro are finished then Save

Posted: 26 Feb 2014 01:00 PM PST

Hello from Steved

Ok I run a macro to clean up a word Document, When completed I would like it to save it please.

I start by Saving the document in this case "27-February-2014.docx" before using the macro.

Now please what is required for it to save the same document after I've run the macro, my attempt is below. Thank you in Advance.

Sub Save()
    ActiveDocument.Save
    ChangeFileOpenDirectory "C:\Racebase Results\Results 2014\February\"
    ActiveDocument.SaveAs2 FileName:="27-February-2014.docx", FileFormat:= _
        wdFormatXMLDocument, LockComments:=False, Password:="", AddToRecentFiles _
        :=True, WritePassword:="", ReadOnlyRecommended:=False, EmbedTrueTypeFonts _
        :=False, SaveNativePictureFormat:=False, SaveFormsData:=False, _
        SaveAsAOCELetter:=False, CompatibilityMode:=14
End Sub

Word stops working

Posted: 26 Feb 2014 12:44 PM PST

I have installed Office 365 home premium on three computers.  I already had word installed on them.  Every time I try to use word it continually stops working and I have to restart it again.  It is the same on all my computers.  I am using Windows 7 on every computer. 

Office pro 20007 Word problem

Posted: 26 Feb 2014 12:11 PM PST

I have a very unique problem.  When I start Word my mouse cursor changes to the circle that goes round and round as if it is loading the program, except it doesn't stop.  It may pause for a moment then it starts chasing again.  I am using windows 7, upgraded from Vista on a gateway laptop.  I have had it on there for at least two years and never had a problem until recently.  I've tried reinstalling the software, but only did the repair feature for fear of losing my docs.  All of the other programs in the suite run fine, it is just Word.  Any ideas would be appreciated.  I have plenty of hard drive space, approximately 40G.

Thank you,

Signing in to Microsoft Account from Word 2013

Posted: 26 Feb 2014 11:38 AM PST

I have been having trouble signing in or doing any task that involves connecting to the internet through Microsoft Word 2013.  Each time I try to sign in or, for example, try to insert an online video, it gives me an error messages saying that Microsoft is having "temporary server issues". Yet I have a working internet connection and can sign on to my account without any hassles when I try to do so through my internet browser. 

Is this a problem with my version of Microsoft or perhaps my laptop? Please if you could give me any advice on the subject I would really appreciate it!

Kind Regards

E. Swart

Lost Math AutoCorrect Entry

Posted: 26 Feb 2014 11:33 AM PST

I seem to have lost the Math AutoCorrect entry \doubleQ. I am using MS Office 2010 Home and Business on Windows 7 Home version. Is there a way to recover this entry? Can I download this from somewhere. or must I reconstruct it somehow?

Newsletter formatting problems

Posted: 26 Feb 2014 11:27 AM PST

I've been using Microsoft Word 2007 and Outlook 2007 to create and test/send a monthly newsletter for a client for about 3 years now. Each issue seems to come with new and increasingly frustrating formatting problems. The newsletter is set up in a table in order to control columns and cells. Each issue is limited to 2 legal size pages, as we also print the newsletter. 

The formatting problems are numerous and usually occur when pasting into the email message. Problems like: photos jumping around, the right column repeating itself, the right column changing width, line spacing changed, and so on. The current issue looks great except the a photo in the bottom cell on the left and the company logo in the footer - they are both dropping down about 2 inches from where they belong - but still leaving a space where they should be displayed. This is a problem I've had before, but I can't even remember how we got past it last time.

I would appreciate any and all suggestions on an easier way to format these, or even alternate software suggestions of easy to design newsletters (from our own template) where "what you see is what you get".

Windows 7 64-bit Windows Installer "preparing to install" message when opening Word or Excel

Posted: 26 Feb 2014 11:25 AM PST

    After working fine for over a year,  NOW when I try to open a Word document or an Excel document  (or just open Word or Excel),

 

 I get a message box from Windows Installer that says "Preparing to Install".         I am running Windows 7 64-bit.

   I cannot get past this.

 Note:  I bought my Lenovo computer with Office 2010  as extra.  I was given a product key to enable the Office software.

  I don't know that I can uninstall and reinstall......   how would I do this?   Once I uninstalled, I could not get Office back, could I?

  Thanks much.

 

     -jwr

Misaligned numbering and failure to obey numbering commands

Posted: 26 Feb 2014 11:04 AM PST

I'm writing a manual and have numerous sections with subsections, and each is numbered with upper and lowercase roman numerals.
Each is also formatted by a style.

My first problem is when I enter the command to start the numbering over after each section, it doesn't work. It says I will modify every section linked to the applied style and asks if I want to proceed. I click "yes," and the numbering remains as a continuation from the previous section instead of starting a new section. I enter the command by right clicking, under "Numbering" choosing "Set Number Value," and then clicking "Start New List" after telling it to start at i, A, or I. As I said, it doesn't compute. The numbering continues from the previous section's number value; it also changes my spacing settings when I enter the command, which doesn't make any sense. The Style dialog doesn't show a feature to command it to start a new list either.

My second problem is I can't figure out how to align my roman numerals, upper and lowercase, that are in lists by their outer side. Word automatically aligns their periods or inner sides, and it leaves a ragged left look to my large sections of lists that start with "i" and end with "xxii."   

My third issue is that the paragraph spacing in each style is set to 0", but styles with numerals set them farther left. Surely the styles can be modified to correct this issue.

Word 2013 shuts down almost immediately after opening

Posted: 26 Feb 2014 10:23 AM PST

To  Whom It May Concern ,

I purchased Word 2013.  When I open it, the program almost immediately shuts down.

The message screen shows:

Microsoft Word has Stopped Working

A problem has caused the program to stop working correctly.  Windows will close the program and notify you if a solution is available.

I will open the program successfully.  When I try to open a recovered document, the above message is shown.

When I try to open other document.

NEW

BLANK

then stops working message

Please help

Thank you,

Rebecca Boldt

Words in Color Not Printing, Black and White Words Are Fine

Posted: 26 Feb 2014 10:19 AM PST

I am trying to print a document that includes primarily color fonts, and a little bit of black and white.  When printing, the words in B&W print fine, but the words in color do not print...at all (not even printing in B&W instead of color).

I have tried printing to a couple of printers, with no success.

Last week I was able to without a problem, and today I had co-workers send the same file to the same printers, and they had no issues with the color printing.

Any suggestions?

Word question

Posted: 26 Feb 2014 09:06 AM PST

My son was working in Word and now I have a sentence across the top that comes up each time I open Word.  I don't know how he did it, I just want to undo it so I have a blank worksheet at start-up.  Any help would be appreciated.

Word Hyperlinks suddenly stopped working today

Posted: 26 Feb 2014 09:02 AM PST

6 hyperlinks to excel surveys in a word doc --

Saved in one drive and shared to a dozen people all 6 hyperlinks stopped working on all computers today.


I have gone back to the surveys clicked on survey link share and pasted the link directly into browser -- and that goes correctly to the relevant survey.

 

However hyperlink the same link into word doc and the link does not work.

Also no other hyperlinks created in word work -- both word online and word proper

I have repeated the same hyperlinks in an excel file and these work just fine

Same problem from many computers different browsers various operating systems

Anyone got any ideas -- are Microsoft updating anything at the moment is this just a glitch? 

How do I desable spellcheck on only one document?

Posted: 26 Feb 2014 07:54 AM PST

[Moved from Word 2011 for Mac by moderator]

This isn't really a good answer as Word 2010 doesn't have a Tool option to select anymore, at least not out of the box.  Anyways, here is how you actually do this for just one document.


  • Click on the "Review" tab at the top
  • Then Click on "ABC Spelling & Grammar".  This should be on the far right under the "Proofing" section of this tab.
  • When the Spelling and Grammar checker pops up click "Options" at the bottom left
  • At the very bottom of the "Proofing" section of the Options menu that pops up there is a section with the header, "Exceptions for:".
  • The current document should be selected, but if it isn't select it in the drop down.
  • Check "Hide spelling errors in this document only" and "Hide grammar errors in this document only"
  • Your done!

You can also get to the "Proofing" options menu or any other options menu by simply going to 
  • File --> Options
  • Click on Proofing or one of the other options

Select All command for Normal Style gives wrong Word Count

Posted: 26 Feb 2014 07:15 AM PST

I am currently writing a large dissertation in Word 2010 (~30 pages, 6,000 words atm), and I have organised all my headings, and text using Word's styles to allow for a more organised document. This was particularly helpful as what I could do is just right click on the Normal style, and choose Select All to find the correct word count for my dissertation with parts such as figure legends excluded.

Just recently, Word has started acting up. Now when I choose Select All for the Normal style, it selects all the text correctly, and a few seconds later it scrolls to the bottom of my document and only selects the last few instances of text formatted with the Normal style, and thus giving me the incorrect Word count of ~500 instead of ~4,000. 

Does anyone know what on Earth is wrong with Word, and how I could fix this ASAP? 

THIS IS SO ANNOYING!

Tool bar is not available in Word 2013

Posted: 26 Feb 2014 07:14 AM PST

When I open Word 2013 the tool bar is not available. The only buttons at the top are ? and X

Heading Styles to Table of Contents Styles bolding issue

Posted: 26 Feb 2014 06:26 AM PST

I have modified all 9 heading styles in Word 2007.  They work perfect.  I have also modified the TOC styles and all is nearly perfect except for the last two.  When I generate the TOC, TOC 8 and 9 keep the bolding of the numbered heading, but not the text.  There is bold applied to the Styles Heading 8 and 9 for both the text and the numbering but there should be no bold when converted to the TOC 8 and 9.  I've done everything I can think of.  I have gone into the modify option of the heading 8 and 9 style and see the normal things applied, bold etc.  I have gone into the modify style for TOC 8 and 9 and see no bold applied.  When I highlight the number in the generated TOC it says times new roman bold, but it does not say that in the Style itself.  It's driving me insane.  Any suggestions on what I am missing here?  Here is an example of what I mean.  As you can see, when converted to the TOC the numbering of the  last two stay bold:

HEADING 1

Heading 2

I.     Heading 3

       A.     Heading 4

                1.     Heading 5

                        a.     Heading 6

                                i.     Heading 7

                                      (1)     Heading 8

                                                (a)     Heading 9

TABLE OF CONTENTS

HEADING 1 (TOC 1)

      Heading 2 (TOC2)

I.     Heading 3 (TOC 3)

       A.     Heading 4 (TOC 4)

                1.     Heading 5 (TOC 5)

                        a.     Heading 6 (TOC 6)

                                i.     Heading 7 (TOC 7)

                                      (1)     Heading 8 (TOC 8)

                                                (a)     Heading 9 (TOC9)

Why the first copied images is diplayed in word 2007 inspite of copying another images?

Posted: 26 Feb 2014 06:13 AM PST

Why the first copied images from any web page of Internet Search like bankersadda.com is diplayed again in word 2007 inspite of copying another images?

I have my macro which picks up "not to be used words", but can I set it up such that it also recommends the other words

Posted: 26 Feb 2014 03:53 AM PST

I have set up macro for my word document, which highlights the words I have listed as not to be used words. But to look for the words that I can replace it with I need to check my list, which is a bit bugging. Is it feasible to achieve this: I click the highlighted word and a context menu appears which gives me word/words that I can use to replace it. If yes, please let me know how can I do this.

I am looking forward for something like this. In this case I have just one word, but at places I may have few more words in the "replace with" list.


Insert caption to images/graphs/pictures; two possible Word options

Posted: 26 Feb 2014 12:22 AM PST

While inserting captions to graphs or images in my Word document, I find that sometimes Word chooses another layout for me. I added two images below which shows the difference:

Picture 1: Here the caption is 'integrated' in my document and I can also see it in my cross reference (important!).

Picture 2: The caption is inserted into a text box and I cannot find it in my cross reference.

I have tried to find the difference in the caption insert box, but I do not seem to be able to find why sometimes Word chooses to go for the text box option. Is this a problem of the type of image I am trying to connect to (though other pictures can get the right caption and other figures or tables for example do not) or something else?

Regards

Robin

edit: the numbering in both captions is visible & can be updated, so the link is there in both cases)

Office 2010,

Windows 7

word starter 2010

Posted: 25 Feb 2014 11:36 PM PST

I have word starter 2010 installed and upto press, have not had any issues. However, now, when I try to open my documents from the start menu, the icons are orange and I get a message that states the programme needed to open these documents is not installed, I then have the option to purchase another office product. BUT, when I open the word starter itself from the programme menu, it opens fine and I can view/amend/create new documents, I just cannot save them. Please help????

Microsoft Word 2013 on Windows 8.1: "Microsoft Word has Stopped Working"

Posted: 25 Feb 2014 10:16 PM PST

Hello, I am using Microsoft Word 2013 on Windows 8.1, and am working on a long documents using EndNote for references. When editing the text, after about 5 minutes I will start getting an error message that "Microsoft Word has Stopped Working..." and must close. It recovers my document, but keeps happening.

I need a solution for Word 2013, and one that allows me to use EndNote (and not lose my data in the process!)

Thanks!

Saving in 2013 and can no longer open files!

Posted: 25 Feb 2014 09:07 PM PST

Hello,

So I had a trial of Microsoft 2013 home premium and now it is over. I have gone back to typing papers in microsoft 2010 and every time that I go to save it, It saves in 2013 and I cannot open the files on my computer! This is really affecting my work because I cannot open past files. Please help thanks!!!

How to save a new picture style in Word

Posted: 25 Feb 2014 08:42 PM PST

Hi. I need to create a new picture style in Word 2013 but can't seem to find any way to do this. The style will be simple: I'd like all the pictures in the document to have a black border applied to them. Thanks.

Editing CV

Posted: 25 Feb 2014 08:18 PM PST

Hello, I have difficuling in editing a cv from model. When I add info on the right side of cv from the next page onward, it's continuing on the left side.

Here are the links of Unedited cv https://onedrive.live.com/redir?resid=85B584FBEA75DEDD!108&authkey=!AJMWL60eQ8FENjQ&ithint=file%2c.docx

and edited cv what supposed not be happened. https://onedrive.live.com/redir?resid=85B584FBEA75DEDD!107&authkey=!AJ4XIKWOZPnL4-o&ithint=file%2c.docx

Customize autoformat

Posted: 25 Feb 2014 07:39 PM PST

Hi, I write H2O2, where the 2's are subscripted, all the time.  I'm hoping I can customize the 'autoformat while you type' so when I type H2O2 it automatically subscripts for me.  Is this possible?

Thanks!

Microsoft Office stops responding, even after several troubleshooting steps.

Posted: 25 Feb 2014 06:29 PM PST

First of all, I am runnning on Windows 7 home premium, and using Microsoft Office 2013.

So I have recently been having problems with all of the office programs, mainly using word. They work fine until 2~5 minutes after opening, when they stop responding and leave me with no choice but to force close them. After searching the web for several different troubleshooting steps, nothing has worked so far.

Things I have tried so far;

-Running word in safe mode and disabling ALL add-ins.  Restarting, leaving it with no add-ins at all.

-Repairing office several times, having each time an error at the end; "Microsoft Office Professional Plus 2013 configuration did not complete successfully."

-Running different anti-virus programs (Microsoft Security Essentials, avg free) with no negative end result.

-Checking for Windows updates, driver updates, anti-virus updates, etc.

-Even tried the installation of a Microsoft Fix It tool only to find an error as well 

So far I've only achieved frustration, not a single difference from all these steps.

Text always right-banked

Posted: 25 Feb 2014 05:20 PM PST

When I open MSWord I have some content on the page that used to to blank

How do I reset it so when I open MSWord I just get a plain empty doc?

Further the content is right-banked! This now seems to be the default, even though left-aligned is set

I recently opened a document I received from Saudi Arabia, might I somehow have set text to go from right to left?

If so, how can I change this back?

Please help, urgently, I have deadlines and can't work this out! Many thanks

Editing a cross reference to a figure in word

Posted: 25 Feb 2014 05:00 PM PST

Hy there,

I'm using cross references in word to the figures that I have in my document. I'm first adding a caption to the figure and then selecting the reference style 'Figures' and showing only Figure x.x. So far so good....

But I noticed one thing, when reading the text (at pdf for example) and I click on the 'hyperlink'/cross reference text, the cross reference always works in a way that the figure caption shows up on the first line of the document, which is obviously what we referenced, but the thing is, the figure is above the caption and this way, will never pop/show up together with the caption.... Having the reader always to scroll the page up to see the figure...

So my question is exactly if there's a way for me to change the selected page area where the cross reference goes to. For example, if the cross reference showed the caption at the bottom of the page, both the caption and figure would be visible.


Thanks in advance. Best regards,
Bruno Melo  

Hide the ribbon but always show the custom access tool bar (CAT)

Posted: 25 Feb 2014 04:25 PM PST

When editing a Word document with my tablet and digitizer pen I needed to keep the pen ribbon open but that takes up a lot of valuable screen. I put the start/stop inking and erase commands on the custom access tool bar and it freed up a lot of space. However, I can't figure out how to just keep the CAT and hide the ribbon for even more space.  Anyone know how that's done?

Manuvering around in a word template I have created and others accessing my template

Posted: 25 Feb 2014 04:24 PM PST

I created several templates and saved them so in MY TEMPLATES folder - which was easy since I was the only one that used these.  Now I have 2 more people in my office that may need access to these templates to fill out forms. 

How can I set up the forms so that we can use "tab" to advance to the next text field?  Right now it looks like the only way to maneuver to the next fill-in field is to use the down arrow. 

If I save these files on the server so they have access to them, do I save them as files or templates?  I want them to have easy access but also want to ensure everyone is working on the most current versions.  Do they have to open the folder where these are saved or can they add them to their own MY TEMPLATES folder?