Pages

Search

Microsoft Word - auto correct

Microsoft Word - auto correct

auto correct

Posted: 16 May 2013 12:03 PM PDT

I have an acronym used frequently in my industry (HSI - hot section inspection for an engine) and my spell check corrects it to HIS.  How can I exclude acronyms from this?  thank you

Backspace error!!!

Posted: 16 May 2013 08:25 AM PDT

Backspace key doesn't work properly at all. It clears more than a single character at once when clicked. That clearece is also uncontrollable as it clears random no. of characters each time. How to fix it?

Printing Macro Error

Posted: 16 May 2013 05:48 AM PDT

I'm using a macro created in Word 2003 but doesn't work in Word 2010.  I get a run time error (5843) that says something is out of range.  This is the line of code where the error occurs.  Application.MailingLabel.CreateNewDocument Name:="8167", Address:="", AutoText:=""  Any help will be appreciated.

Word 2007; won't open a doc sent to me but does open what I created.

Posted: 15 May 2013 09:16 PM PDT

I get the minutes from an organization I belong to and could open them easily through Word.  Now I click on the attachment, open, which opens Word but doesn't open the doc.  I tried opening previous minutes I had saved and opened in the past, but now can't open them.  Any doc I created I can still open.

How can I delete a page with text on it?

Posted: 15 May 2013 04:44 PM PDT

If I have text on a page and I don't like what I see, how can I just delete the whole page? In the Help area I see how to delete everything but the whole page. Is there a delete button that will get rid of the page without storing it? I don't want to click on the X and close the program.

number of pages initially wrong on first page when "different first page" selected

Posted: 15 May 2013 03:09 PM PDT

Hello,

I am seeing a problem with the "number of pages" field in the footer on the first page of a Word document when I have selected "different first page".  If I make an update to the first page of the document, or even double-click on the footer, then the number of pages field is corrected.  If I then save and close the document after the number of pages field is correct and re-open.  It displays incorrectly.

Steps to reproduce:
1.  Create blank new DOCX.
2.  Insert a page break (so now there are two pages in the document).
3.  double-click the footer on the first page and select the "different first page" checkbox on the "header and footer tools" ribbon.
4.  Add "Page X of Y" to the footer on the first page using the "Page Number" button on the "header and footer tools" ribbon.
5.  Add "Page X of Y" to the footer on the second page using the "Page Number" button on the "header and footer tools" ribbon.
At this point the first page says "Page 1 of 2" and the second page says "Page 2 of 2".  This is what you would expect.
6.  Save and close the document.
7.  Re-open the document.
At this point the first page says "Page 1 of 1" and the second page says "Page 2 of 2".  The first page is wrong.
8.  Double click the footer to enter footer mode. (I could also update all fields or several other things)
At this point the first page says "Page 1 of 2" and the second page says "Page 2 of 2".  Now it looks right.

I understand that this is a screen display problem, and it will print correctly if I wanted to print it.  I need it to display correctly when a user first opens the document.  I don't want to add a VBA macro to tell it to update fields after opening.

Thanks,

Jake

Disappearing categories

Posted: 15 May 2013 09:45 AM PDT

The "symbol" category has disappeared from the "insert" pull-down. How do I get it back?

ERROR: Word cannot start the converter mswrd632

Posted: 15 May 2013 08:30 AM PDT

I'm a fiction writer who receives partially book-formatted galleys from my editor. This last time, I got the above error. Couldn't get out of the error box, so kept clicking OK and doc opened. Made my edits but the doc does this every time I open. I'm hesitant to implement the below fix as I'm not sure if it can be reversed easily should it causes me more grief; such as, not allowing me to open any of my editors future book formatted docs. This has never happened before with Word 2010 on any past documents with this editor. I've Windows XP. We both use Word 2010. Any advice? I need this resolved.

 

HERE'S WHAT I FOUND IN THE TUTORIALS: (the piece I'm hestitant to try)

 

ERROR: Word cannot start the converter mswrd632

 

I plugged the above error message into your website and found the below. I'm hesitant to do it for fear I can't open my editors docs. Worse yet, that I can't easily put the deletes path back.

 

Look at the "Known Issues" section of this Microsoft article.

http://support.microsoft.com/kb/973904

<excerpt>
Let me fix it myself To unregister the mswrd632 converter yourself, edit the registry as follows:

1. Click Start, click Run, type regedit, and then click OK.

2. Locate and then click the following registry subkey:

HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Shared Tools\Text Converters\Import\MSWord6.wpc

3. On the Edit menu, click Delete.

4. Click Yes.

5. Exit Registry Editor.

This change will effectively unregister the converter and disable it for third-party applications and for Microsoft Office. Microsoft Office will use its own text converters to open these kinds of files.

</excerpt>

 

 

Hi,

Well , few months back one of our client also experiened some kind of issue. We had sucesfully fixed this using following methods

Remove below registery key.

1. HKEY_LOCAL_Machine\Software\Microsoft\Shared Tools\Text Converters\Import\MSWord6.Wpc

Remove following files also.

1. C:\Program files\Common files\Microsoft Shared\TextConv\msword632.cnv

2. C:\Program files\Common files\Microsoft SHared\TextConv\msrd832.cnv

Cheers!!!!!!!!!!!

Best regards,

Table styles in embedded documents

Posted: 15 May 2013 07:20 AM PDT

I am storing an embedded document that contains a table with an applied table style.  When the embedded document opens, the table style is not applied unless its name equals its ID--i.e., it has no spaces.  (A quick look inside a docx reveals that style IDs are the style names with all spaces removed.)  Styles whose name contains no spaces are applied; styles whose name contains spaces are not.  Why?

Windows 7 Printing Problem

Posted: 13 May 2013 06:23 AM PDT

I have Windows 7 with Microsoft Word 2010 starter, it all works fine on the screen, but will not convey 'shapes' to my HP deskjet 1280.  Prints ordinary  type all day long, and will print photos, but will not print 'shapes' (e.g. squares, circles etc in Word) which I use for diagrams.

i cannot use microsoft word since i installed office suite 2013. can anyone help please? i need to finish several school projects

Posted: 11 May 2013 11:03 AM PDT

I just installed the office suite 2013 yesterday and now it tells me that a problem has caused microsoft to close everytime i try to use word

WORD WILL NOT OPEN ON NEW COMPUTER- OTHER OFFICE APPLICATIONS WILL OPEN

Posted: 10 May 2013 04:39 PM PDT

Have just installed office 2013 and every time I try to open word it says an error has occurred and asks if I want to repair it but when I click to repair it nothing changes- frustrated- excel and other applications work

Microsoft Word - Word 2010 changes, deletions and insertions showing on opening a document - not wanted!

Microsoft Word - Word 2010 changes, deletions and insertions showing on opening a document - not wanted!

Word 2010 changes, deletions and insertions showing on opening a document - not wanted!

Posted: 15 May 2013 05:50 AM PDT

Whenever I open a document in Word 2010 it opens showing the changes, deletions and insertions. I don't want it to do that! How can I set a "default" to open "normally"? Plus if I upload the file to a distant user it opens there with the changes etc showing! Infuriating! I know I can change the View on screen using the Track Options/Show Markup etc but it always opens with the changes showing! Grrrr!

Drag and Drop to Merge Documents

Posted: 14 May 2013 01:09 PM PDT

I was informed of a neat tool today for Word 2010.  Where you can Drag and Drop document s from Windows Explorer into a Word Doc to merge them together.  My problem is that it only brings in the first page.  i.e.

 

Doc1 = 12 pages

Doc2 = 4 pages

Doc3 = 2 pages

 

 

final merged doc..... 3 pages

 

Is there a step or flag or setting that I am missing to make this work correctly?

Microsoft Office 2013

Posted: 14 May 2013 12:51 PM PDT

In all of the Office 2013 applications, when I print a document, the correct printer (Epson 2200) is identified, and several printing options are available (all on the page that appears after I first choose to Print).  There is no option there to allow a "Print Preview"; however there is a button to open the printer's "Properties".  Under Properties, I do have the option of a Print Preview, and I have always had that option chosen.  When I choose to print, however, it prints immediately without a Preview.  In all the non-Office programs I use I automatically get a preview, and having that ability in Office is important to me.  I have not determined the driver in use, but my guess is that it's one provided by Windows 7 (32 bit).  Three questions: 1 - is that likely the problem,  2 - if so, can I use the appropriate Epson driver, and 3 - if I can use the Epson driver, how do I make the necessary changes?  Under the required Office Topic below, I selected Word, but the question applies to all of the Office suite of programs.

I will appreciate any help.

Reference number and cross reference for equation numbers tp match the thesis format of our university

Posted: 14 May 2013 10:18 AM PDT

I am trying to create auto-count equation numbers for my long thesis. The format being used for the equations in our university is "(chapter-number)". And then you will cross-reference as : Equation 3-20

     F = m.a     (‎3-20)

So I have been forced to use "(" as the label and ")" as the caption text. But when I cross refernce I have these options (with the outcome of each option):

Entire caption              -> (3-20)       //has unwanted paranthesis
Only label and number -> (3-20        //unwanted opening parenthesis
Only caption text          -> )            //only the closing parethesis appears
Page number (unrelated)
Above/Below (unrelated)

If we had a "Only number" option my problem could be solved.  Now, How should I create the auto-number and how should I do the cross reference.

P.S: I don't have this problem with Figures, Tables, etc since the figure is references as "Figure 3-1: description" and cross referenced as "Figure 3-1", so I can easily use the "Only label and number" option. In the case of equations those parenthesis are bothering.

Word 2013: "Word could not re-establish a DDE connection to Microsoft Excel"

Posted: 14 May 2013 06:03 AM PDT

Recently upgraded from Office 2010 to 2013.  All of a sudden (3 days ago) I started getting an error that reads "Word could not re-establish a DDE connection to Microsoft Excel"

 

I have an excel spreadsheet that contains inventory information and I use Word to access that spreadsheet to print price tages.  Have never had an issue until now.

 

Process is to open the Word document which then gets the source data from Excel.  Word is open and Excel is closed.  Worked fine and until 3 days ago worked fine in 2013.

 

Now I get the error unless I open Excel first - just the app, not the source file.  When Excel is open all works fine.

 

Anyone else having an issue?

 

Also having a "just started" issue in Quickbooks Pro 2013 accessing an Excel 2013 file.  Works fine with Excel 2010 but won't work with 2013.

Turn on Create a File

Posted: 13 May 2013 01:36 AM PDT

Create a File function has been turned off how do I turn it on   .......  I did something that turned off my Create File button  my pre-existing files exist and can be accessed but I can not make any new files.

How to turn off the floating menu? When I write or put cursor on active http text the darn help menu pops open in my way.

Posted: 10 May 2013 07:31 PM PDT

See the B I U menu above? Well that menu pops up right were I am typing and I can't see anything its so annoying. I just want to click it off.


Its on Office with XP or Office with 7

Microsoft Word - How do I have downloaded documents always open in word 2013 in the "enable editing" mode?

Microsoft Word - How do I have downloaded documents always open in word 2013 in the "enable editing" mode?

How do I have downloaded documents always open in word 2013 in the "enable editing" mode?

Posted: 14 May 2013 09:14 AM PDT

When I download a document from an email, it always opens in the "protected view" mode. If there are text boxes, pictures or graphics in the documents, they are not the way they really appear in the document. I have to change to the "enable editing" mode to see the true document. It would be very  helpful if I could just eliminate the protected mode step and go right to the enable editing mode as most of the documents I open are attached to emails.

Nearest Preceding Sequence Number and List of Figures

Posted: 14 May 2013 08:44 AM PDT

I'm trying to make a set of Figures where a set of related figures are named with a alphabetic second character.

 

For example I have normal figures 1, 2, and 3 but figure 4 is divided into 4a, 4b, 4c, and 4d.

 

I used the \c switch to maintain the figure number the same for 4b, 4c, and 4d as illustrated in this article:

http://answers.microsoft.com/en-us/office/forum/office_2003-word/how-to-use-caption-to-label-table-1a-1b-then-table/79d7624f-8390-4c60-ade0-650674425eb5

 

However, I now have the problem that none of these figures show up in my "List of Figures" (TOC field code: {TOC \h \z \c "Figure"})

 

Is there any way to force these figures to also show up in my list of Figures?

location of customized templates

Posted: 14 May 2013 04:04 AM PDT

I just purchased a new Windows 8 computer with Office 2013.  I have created a Word template and saved it in the following path:

C:\Users\[my name]\Documents\Custom Office Templates\My Memo.dotx


Now I need to know where to find that so that I can use it.  I've added a button to my QAT for TEMPLATES, but my newly created template is not there.

How to use checkboxes in Word Revisited. The original discussion is broken

Posted: 13 May 2013 12:50 PM PDT

Greg Maxey replied the following in my original question:

 

Word 2010 has a checkbox content control. They are inserted using the Developer tab>Controls group.

 

Unfortunately I've been trying for a week to reply, but when I click on either of the reply links, the response box is greyed out and the little circle (that replaced the old hourglass) just keeps spinning forever.  I've let it go for 24 hours, but it never goes away and un-greys the reply box, so I've started a new discussion of the question.  Please forgive me for the duplication, but I don't know what else to do.

 

My reply to Greg would be that I don't have a Developer tab in Word, and haven't been able to find any information about how to get one.  The help in MS word is anything but helpful; none of my numerous attempts to search help yealded anything remotely similar to a Developer tab.

 

I only hope that if I have to respond to any replies to this post, that I'll be able to.  I've never before encountered this kind of reply problem.

 

If I'm doing something wrong, please, someone, tell me what it is so that I can correct it.

 

 

Auto date change

Posted: 13 May 2013 06:51 AM PDT

How Do I automatically have the date change in a word document when I open the document?  I want to have the current date appear whenever I open it.

 

Thank you

Word 2010 stopped recognizing licensed copy of Mathtype

Posted: 12 May 2013 08:54 PM PDT

Yesterday I was able to use all the features of my licensed copy of Mathtype 6.8 in Word 2010. Today word informs me that features are disabled because the 30 day trial period is over. Mathtype still works fine in Wordperfect, so it is not a problem with Mathtype. Also, I did try to reregister Mathtype and got a message that it was already registered. So something apparently changed in Word overnight. Was a new update installed that interferes with Mathtype?

How do I access my Word 9 documents in Word 2013?

Posted: 12 May 2013 11:39 AM PDT

On my Word 2013 I click Open/Computer/My Documents. I see dozens of folders and then about 100 WPS (Works) files. But when I click My Documents from the icon on my desktop, I see all of the above plus the dozens of Microsoft Word 9 files. Why can't I access these old Word files via the Open/Computer/My Documents route? Why do I have to use the roundabout route? Is there a way I could shuffle the Word 9 files into the Documents Library/My Documents window so that I could access these files in one step?

 

I just got my new computer and the Outlook and Word 2013 programs. I'm finally getting used to these but need a little help till I get organized. 

Creating Forms in Word 2003 format with Word 2010 software

Posted: 10 May 2013 04:03 PM PDT

I work in a agency that contains about 12,000 potential Word users (not everyone uses Word, but a huge percentage of us do, and everyone has Word on their PC).  We have a web-based forms server that maintains several thousand MS Word fillable-forms, all in Word 2003 format.  By fillable-form, I mean a Word form that has fill-in blanks for text boxes and check-boxes, etc, that can locked, and electronically populated by the users.  At my agency, we presently have a mixture of Word 2003, 2007 and 2010 software, and are slowly migrating all users to Word 2010 software, but this will probably be several months into the future before completion of that migration.  We are still running Windows XP at my agency (thus we have no Word 2013 in use within my Agency yet).  Here is my question:

HOW CAN SOMEONE USE WORD 2010 SOFTWARE, TO EASILY CREATE FORMS IN THE WORD 2003 FORMAT, THAT CAN BE OPENED WITH WORD 2003 SOFTWARE, WITHOUT ANY ERRORS ON THE WORD 2003 FORMS?


I have tried using Word 2010's "retro form tools" to build Word 2010 forms, and I have had very little success in building a fillable-form that can be opened in Word 2003 software, using Word 2010.  For me, it is way easier to just use Word 2003 to create a Word 2003 formatted form (especially since several Word 2003 books, and training resources,  show how to do this, in detail).  The problem that I see is that with my agency, it might not a good idea to upgrade all users to Word 2010, and keep all the forms on the forms server in the 2003 format, because the staff that create/update the forms might have a hard time with the editing of those forms using Word 2010 software.  Since Microsoft's web site says that they will not support Word 2003 after April of 2014, I am hesitant to recommend that my agency just continue to use Word 2003 software to create forms into years 2015, 2016, etc, since I think that Word 2003 will start having problems after the Microsoft support ends after April 2014.  The books that I have looked at spend a few pages showing how to make Word 2010 formatted forms, with Word 2010 software.  I have seen no documentation anywhere (in books or on the internet) that shows an in depth instruction on how to use Word 2010 software to create forms that can be opened with Word 2003 software (I suspect that outside of my agency, that is not an in-demand subject).  I have had several people ask me how to make 2003 formatted forms, using 2010 Word software, and my answer has been "get a copy of Word 2003, and use that if you want to make Word 2003 formatted forms".  I am wondering if Word 2010 has some bugs in it, that do not let it make Word 2003 formatted forms, that actually work properly in Word 2003 (at least that is what I am assuming so far in my research on this subject - or I suppose I don't know how to use Word for this - probably more possible that I don't know how to do it, than Microsoft having bugs).  Since my agency has a group (enterprise) license for Microsoft Office, this is not a problem if users have a mixture of Word 2003/2007/2010 software.  I don't think that converting all the forms on the forms server to 2010 format is possible, due to lack of staff to program this conversion, as well as the fact that we have a mixture of Word 2003/2007/2010 software in use, and the migration to Word 2003 to 2010 has been slow.  By the way, I mostly support Microsoft Word, Excel and Access (these three are my areas of expertise), as well as support of other various software/hardware, so I don't really have time to spend a great deal of time, personally researching/studying Word 2010 form creation - to make Word 2003 forms (thus my standard answer "use Word 2003 to create forms in the Word 2003 format").   Also, the forms server in my Agency also has lots of Adobe PDF forms, but I don't know Adobe Acrobat Pro, and I doubt if converting all the Word forms to PDF's is a solution that would be workable (or chosen) for my agency.

MS Word 2010 / Navigation Pane / Can I set it to always appear in one document, but not other documents that I open?

Posted: 10 May 2013 11:31 AM PDT

I only use it in one particular document, and don't want to view it in others, so I end up toggling it on and off a lot.

Three weird things happen at the same time: 1. scroller not working. 2. Numbers/letters appear in command bar. 3. see text.

Posted: 09 May 2013 07:26 PM PDT

Three weird things happen at the same time:

1. scroller does not work.

2. in the command bar on top of the commands numbers and letters appear blocking the commands.

3 After closing the computer (not shutting down), I don't get the normal screen when opening the computer again and I am guided to restart the computer.

 

Has anybody a solution for this weird behavior of my computer.

 

System: Windows 7; Office 2007

Computer: Asus EePC 2012

Printing Problem w/Word and other issues!

Posted: 08 May 2013 04:23 PM PDT

I suddenly started having a problem printing any Word documents in the font Calibri. I'm running Windows 7 64x and Word/Office 2007. Now it refuses to print e-mails and/or web-pages and PDF files! Every other computer in the house can print just fine, I am the only one with problems. I can print from word in any font other than Calibri and I can print from Notepad. Help!

WindowsXP SP2 - Microsoft Office forums

WindowsXP SP2 - Microsoft Office forums

WindowsXP SP2

Posted: 14 Aug 2004 10:00 PM PDT

A really bad impersonation... again! Sigh... too bad that there is no
licensing for using the Internet.

--
Milly Staples [MVP - Outlook]

Post all replies to the group to keep the discussion intact. Due to
the (insert latest virus name here) virus, all mail sent to my personal
account will be deleted without reading.

After searching google.groups.com and finding no answer, Miss Perspicacia
Tick asked:

| It is already Tuesday, 10th August, 2004 and still tere is no sign of
| WindowsXP SP2. It was promised by uncle Bill and he must have got his
| dates wrong. senility can be a very serious disease affecting loss of
| mental faculties. Uncle Bill must never be allowed to go near next
| version of Windows just in case he tampers with it. We have had
| enough of eXPerience with his current windows operating system and
| now we are not ready for similar eXPerience.

Microsoft Word - Why are footnote numbers not in sequence?

Microsoft Word - Why are footnote numbers not in sequence?

Why are footnote numbers not in sequence?

Posted: 13 May 2013 08:15 AM PDT

I have asked this questions before, but the answers were no help. The sequence begins with 1,2,3. It then goes to 4, blank, 6.7.8.9.10, blank, 12. blank, 14, blank, 16, blank, 18, blank, 20. 21. 22. blank, 24. blank, 26,  lnk, 27,28,29, 30, 31,blank, 33,34. This pattern continues until 79 and then is sequential 179. through the rest of the paper 

Tile more than two windows vertically

Posted: 13 May 2013 02:10 AM PDT

I vividly remember on many occasions arranging even more than two windows and choosing whether to cascade them or tile them horizontally or vertically.  In Word 2010, however, I only find the option to tile them horizontally.

 

How do I tile more than two Word 2010 windows vertically?  Thanks.

Editing text from XP in Windows 8

Posted: 13 May 2013 01:21 AM PDT

I wrote a very large amount of text on my computer fitted windows XP. Unfortunately, my computer crashed and burned and was unable to recover the text. However I did burn the text to a CD which I can now read. I now want to edit that text. Can anyone tell me how to do it?

Creating a table, all columns/rows auto formatted with a € sign I can't remove.

Posted: 12 May 2013 09:38 PM PDT

Cannot remove the € sign from all colums, however hard I try!

find and delet words from word document

Posted: 12 May 2013 12:12 PM PDT

using word 2010 how do i
find and delete words from word  document

FILL HEADER IN RESTRICT FORMATTING

Posted: 12 May 2013 05:16 AM PDT

I want to header of my restrict form, but after start enforcing protection with allows filling in form. i created rich text in header but i cant do any changes in header.would you please how can i access fill form as date and number of form in the header.
Regards,
Ali

problème récurrent pour installation de word 2013

Posted: 12 May 2013 03:08 AM PDT

Bonjour,

Jesuidésolé de revenir encore vous importuner maisz je rencontre toujours le mêmeproblème pour installer office 2013 sur mon PC NEUF WINDOWS 8;

Chaque fois je désintalle Office, je me rends surlesite "setup" où je retapela clé. Je télécharge  et j'enregistre. TOUT VABIEN jusque-là.

Le Problème commence loRsque je passe à l'acttion "installer/installation". Alors s'affiche un messasge d'erreur du genre : " déSolés un pRoblème empêche l'installation d'office".

parfois, un miracle : office s'installepourquelque tempsmaisil disparaît après un lapsde t empsvariable.

j'ai aussi eu parfois la bonne surprise de disposer  des autres produits  de la suite Office soit:  Excel, Power Point, etc… mais alors, seul Word dont j'ai le plus besoin pour mes travaux, n'est pas fonctionnel !!!

JE NE SAIS PLUS QUE FAIRE   ET SUIS Véritablement DÉSESPÉRÉ !

JE COMPTE SUR VOUS  ! merci

M. POUGEOISE

Office2000 Installation - Microsoft Office forums

Office2000 Installation - Microsoft Office forums

Office2000 Installation

Posted: 09 Aug 2004 09:57 AM PDT

Assuming its an upgrade version of O2k you need a qualifying product to
install it.
The QP disks are required by the licence, no QP disks, no licence

"com" <microsoft.com> wrote in
message news:317601c47e6f$85d0f4b0$gbl... 

Office 25 digit code

Posted: 09 Aug 2004 01:17 AM PDT

As OEM software you need to contact Gateway.

"srmedtran" <microsoft.com> wrote in message
news:com... 
up 
with 
case. 

End User Agreement keeps coming up

Posted: 06 Aug 2004 10:45 AM PDT

Thanks That took care of it.
 
1 
message 

Header/Footer formatting Microsoft Project

Header/Footer formatting Microsoft Project

Header/Footer formatting

Posted: 16 Jul 2004 09:24 AM PDT

You'll have to resort to A T & T. I had this problem years ago and nothing
else seemed to work.


"Erik" <microsoft.com> wrote in message
news:2e4a001c46b51$6316ad10$gbl... 

Project 2002 Std vs Professional

Posted: 16 Jul 2004 07:32 AM PDT

Hello Brian,
The interfaces of Project Standard and Project Professional are quite the
same.
Project Professional can save its files in a SQL Server data base via
"Project server". It allows a powerfull resource management with resources
skills for example. It allows also the resources to enter their progress on
tasks via Project web Access.
Project Standard is designed as a stand alone planning software, even if it
can share resources with several plans.

Hope this helps,

Gérard Ducouret

"Brian" <com> a écrit dans le message de
news:2e36601c46b41$ae699da0$gbl... 

How do I create a list or report on the vacation of my resources?

Posted: 16 Jul 2004 01:32 AM PDT

A VBA macro that creates tasks for absence periods is on my website.
HTH

--
Jan De Messemaeker
Microsoft Project Most Valuable Professional
http://users.online.be/prom-ade/index.htm
32-495-300 620
"Martin Willberg" <com> schreef in bericht
news:2e2a201c46b0f$740591a0$gbl... 

line of dots preceding task bar?

Posted: 14 Jul 2004 01:55 PM PDT

Steve,
How do I remove the zeros? They pop back up as soon as I move to
another field if I try to delete them.
Dave


"Steve House" <send.hotmail.com> wrote in message news:<#dklh#phx.gbl>... 

decreasing row height in a Gantt Chart

Posted: 14 Jul 2004 09:26 AM PDT

You're welcome, Kara :-)

Mike Glen
MS Project MVP


microsoft.com wrote: 
Subscribe to: Posts (Atom)