Pages

Search

Microsoft Word - Need Help copying an entire page including the header and paste to a blank document

Microsoft Word - Need Help copying an entire page including the header and paste to a blank document

Need Help copying an entire page including the header and paste to a blank document

Posted: 06 Jun 2014 03:39 PM PDT

Hello All, I need your help. My company has many policies and procedures that I am in charge of updating and reviewing. Some of the programs have training documents or other forms in the Appendix.  That are used on a daily bases. Every year when they are reviewed I must go in and change the dates. For every document and updated any changes on the forms to reflect changes in the program.

            Well I thought it would be easy to just copy the form or training document once reviewed with the actual program and paste. This will also take the human error out when making sure the two training documents or forms are the same. So our plant is rather large and there are a few people who need to only print out the training documents or the forms, and they are not to computer savvy, so I can't say" only print pages 46-51 and 75-78".  It is a lot easier to have the document named what it is and in a general location easy to find.

I cannot figure out to copy the entire page including the header and paste to a blank document. I have tried section breaks but maybe I'm doing it wrong? (Or even the abilty to split the document with automatic updates form the original?)

Any help with this would be greatly appreciated.

Thanks

.

Can't open Office/Excel docs

Posted: 06 Jun 2014 02:55 PM PDT

Installed Office 360 Premium last October.  This afternoon around 2:00 pm, sky turned dark and thunderstorms started with a vengeance in a split second so I did not have a chance to close m files.  Lights flickered and came right back.  Computer shut down and message up popped - restoring files so wait !!!!!

Now I can't open Office/Excel files and Firefox won't work.  Surprise, Surprise IE works !!!!

Message pops up: xxx doc is locked for editing by .....

Do you want to open Read Only Copy.  If I click Ok, I get following error messages:

Word experienced an error in trying to open the file.

Check file permissions for document or drive.

Make sure there is sufficient free memory and disk space.

Open file with Text Recovery and Converter

I can see all the office/excel documents desktop and in documents folder but can't open them !!!!

Hope

Error messages

Posted: 06 Jun 2014 01:13 PM PDT

I have Office 2010, I recently installed Office 365. Everytime I try to open a document in Word, Excel, Powerpoint, etc., from Explorer or Documents, I get an error message stating I need to repair, close or get help, I have clicked on repair and nothing happens. The only way that I can open the documents is I have to open Word or whatever program and then open the document from there. Help please!

Angle of text

Posted: 06 Jun 2014 12:56 PM PDT

In MS Word there used to be a function - in 'format text' I think - where you could change the alignment of a piece of text, so that it was at an angle or vertical, (as on the spine of a book). I can't seem to find this anywhere in the new version. Any ideas, anyone?

How do I modify a Mail Merge document without destroying it?

Posted: 06 Jun 2014 11:30 AM PDT

Sounds odd, but I bring up this Word 2007 docx document that we use as our Mail Merge Template.  The person that wrote it is no longer with the Company.  We do a simple mail merge from an Excel spreadsheet.

The problem is that I now want to add another field to print on the merged document.  I've added the field to the .docx mail merge template without any problem and have done a "Preview" and printed a sample.  It's all great.  But if I save the Mail Merge document prior to Previewing or Merging, something happens that makes it unusable.  I can no longer add a data source to it.

I can provide a screen capture movie of what's going on.

Thanks in advance.

Word no longer working on Windows 8.1

Posted: 06 Jun 2014 11:23 AM PDT

When I load Word 2007, I get the following error message "Word could not create the workfile.  Check the temp environment variable"  This is followed by "Word cannot open the office template(c:\users\...\word\scoutcommands.dotm).  When I get rid of these dialogue boxes, I get a blank word document that I can type in, but I can't save.  When I try to save as, no dialogue box comes up. 

My wife and I both use the same computer and software.  If I log on as her, Word works just fine.  Any thoughts?  I have a Microsoft account, she does not.  Should I try to delete my account and restore it?

I should point that Word was working fine before on my account.  Did I delete some files that I should haven't?

Word and false error messages

Posted: 06 Jun 2014 11:12 AM PDT

Hello

When I open Word 2007, the application launches and I click the Office logo at the top. I select 'Open' and browse to the Word file I would like to open. When I click on that file, I get the following error:

'Word could not create the work file. Check the temp environment variable'.

When I try to save the file (not 'Save AS', just 'Save'), the 'Save As' dialogue box opens to tell me that 'This file is read-only'. It is not 'read-only.

So, I click 'Select All' and copy and paste all the text from this Word document and paste it into a new document in the hope that that is not going to display any more false 'read-only' messages. It doesn't, but another message pops up to say that I don't have permission to save in this location, and would I like to save the document in 'My Documents' instead.

But that is precisely where I AM trying to save the new document! 

I also get this error 'Check the temp environment variable' if I attempt to attach a Word document to an email. 

Is this a normal.dot document error?

Thanks.

Word 2003 will not copy formatting

Posted: 06 Jun 2014 10:26 AM PDT

The problem started suddenly this morning.  I use Word 2003 in Windows 7.  When I try to copy and paste from the Internet, Word will no longer copy the format, especially the hyperlinks.  It copies as regular text instead.  I am not completely adverse to buying a newer version of Office if I have to, but I don't know if that is the problem.  Any suggestions?

Word 2010 - How to insert multiple jpg images in word, in name order, with two spaces between each item.

Posted: 06 Jun 2014 10:19 AM PDT

I create inspection reports in word.  The document's first page is for information and formatted as a letter.  The second and beyond pages are split into two columns.  I have to import/insert about 30 jpg images into the document, and then annotate under the image what the image shows. 

I currently click on the spot I want the image to be inserted, drag the image from windows explorer and drop in word.  It puts the image just fine, I have to hit the enter key twice, and then move to the next image and repeat the process.  I then go back and type in the spaces I entered below.

If I grab more than one image and drop in word, they are back to back, and no spaces in between.  I would have to click on each document, hit enter a few times, which is a pain.  More over, if I drag multiple images over, they appear to either be in random order, or at least not by name (image01, image02 would be place image02 then image01 in wrong order).

So again, can I either get a macro, or a rule that says if I drag and drop multiple images into word, that it will put them in name order, and put at least one space between the images so I can type my notes under each?

I have my image "wrap text" set to in line with text.

Thank you very much in advance.  This will cut my report writing in half if I can can get this fixed.

Automated way to change numbers in Word?

Posted: 06 Jun 2014 09:58 AM PDT

Question: Is there any way to get Word to find and replace a varied range of numbers by 1?

I am using Word 2010 on Windows 7.

I have a large document that contains about 300 cites to documents that will be submitted with the document. Each cite reads as "Exh. X" (where X is a number, 1 through 300). So the text might read as follows:

The car is brown. (Exh. 1). The house is red. (Exh. 2). The house is small. (Exh. 3). The car was painted Brown by Jack. (Exh. 1). The car is broken. (Exh. 4). 

The exhibits sometimes change. So Exh. 2 might drop out entirely, leaving a gap from Exh. 1 to Exh. 3. I then need to go through and reduce every exhibit number greater than 2 by one. So Exh. 3 becomes Exh. 2, Exh. 4 becomes Exh. 3, etc. When done manually, this is very time consuming.

If each exhibit only appeared once, I could easily make this change using a field, finding and replacing all the Exh. X entries with the field, and then updating it. But I only know how to do this sequentially (i.e., once updated, the exhibits will run 1 through however many Exh. entries there are). However, as the example above shows, some exhibits appear later in the document and must be referenced by the earlier exhibit number. So Exh. 1 appears first, but it then reappears after Exh. 3. If I were to update this text using a sequential list after Exh. 2 dropped out, then "The car was painted Brown by Jack (Exh. 1)" would instead be marked with Exh. 3.

Is there anyway to get Word to automatically reduce every Exh. number greater than 2 by 1 (or any value)? 

Any suggestions would be very much appreciated!

Using pen feature in Word always brings up waiting pointer (spinning blue)

Posted: 06 Jun 2014 08:45 AM PDT

For a lot of my revision, I've been writing on Word Documents using the pen tab in the ribbon bar which appears when I use word with my graphics tablet. Every time I write anything with the pen, as soon as I lift my pen up from writing something the blue spinning working pointer appears for about half a second every time and it is really off putting and distracting. It never used to happen, it just started happening more and more recently.

Just for the record, this is on a Win7 desktop which is far from underpowered so I don't think it has anything to do with that.

Any ideas welcome :)

 

Got a problem.

Posted: 06 Jun 2014 07:31 AM PDT

For the last 18 days now, I've been getting an extremely annoying dialog box every time I open up Microsoft Word (v.2010) that keeps counting down the days for me to buy a new activation key. (you greedy, profitmongering Microsoft bastards...)

Well, when my family got around to doing just that last night (after a certain cavalcade of errors) by buying an installation/activation key for Office360 (which I'm not sure we should've gotten...), I activated a Word file and got "(Product Activation Failed)" in the header amidst some blather about how my copy might be counterfeit and going on about how I should change my product key.

At the very bottom of the dialog box, I got "Error code: 0xC004F074" to boot.

What exactly's going on?!?

I'm at the end of my rope here!

And if I have to buy something else to fix this problem, so help me God...!

Non Breaking Space

Posted: 06 Jun 2014 07:00 AM PDT

I have three related questions on the non breaking space?  I looked in Word help and am still confused.

  1. What is a non breaking space?  I do not know what it does as opposed to a regular space inserted with the space bar.
  2. With the non printing characters displayed, what indicates the presence of this feature?
  3. I understand it is inserted with CTRL+SHIFT+SPACE but that key stroke does not appear in the Customize keystrokes list found on the Customize dialog box.  How do I add it?

Thank you for your input.

Hugh

Use colorful text boxes and pictures in a header that will not be dimmed

Posted: 06 Jun 2014 06:15 AM PDT

I want to place text boxes will color fills and images as part of a header. When I'm in the header, they are bright. When I close the header, they are dimmed. This is expected behavior. However, I would like the image and objects to stay bright even when the header is closed. Is this possible?

Bright text boxes and images inside header:

Dimmed image and objects:

I OVER WROTE ON NOTEPAD DOCUMENT BY ACCIDENT YESTERDAY

Posted: 06 Jun 2014 05:56 AM PDT

I OVER WROTE ON NOTEPAD DOCUMENT BY ACCIDENT YESTERDAY CAN I RETRIEVE THE ORIGINAL DOCUMENT, MAYBE SOME WHERE ON MY COMPUTER BUFFER OR SOMEWHERE ELSE IN MY COMPUTER.

Table rows: How many rows are in my selection?

Posted: 06 Jun 2014 05:44 AM PDT

Is there any way to be able to quickly tell how many rows I've selected?  So far I'm batting zero on an answer.

Adding Values of Dropdown Lists in Word 2010

Posted: 06 Jun 2014 03:23 AM PDT

I have a table in word and the last column of each row has a drop down list consisting of:

Good

Satisfactory

Needs Improvement

Each of these drop down options have a value assigned to them:

5

0

-5

At the bottom of the table I would like to SUM the values of the drop downs inserted.

Does anyone know if this is possible?

Thank you for your help.

Can't get mirror margin to print correctly

Posted: 06 Jun 2014 02:45 AM PDT

I am going to make a bound book and print on both side, so I use mirror margin.  In the print preview, the top and bottom margin on odd page and even page are on the same level.  However, the top and bottom margin on the printed output are different on odd page and even page.

I set the top and bottom margin are 0.9".  However, on the odd pages of the printed output, the top margin is 0.9" but the bottom margin is 1.5".  On the even pages, the top margin is 1.5" but the bottom margin is 0.9".

How can I print it with the same top and bottom margin on both odd and even pages? 

crazy footnote

Posted: 06 Jun 2014 01:22 AM PDT

Hi, 

somehow a footnote whose number I deleted in the document body (meaning to delete the number and the footnote below as well) is still showing in the footnotes, so that in the document body there is a number skipping. I have tried to act on that malicious footnote, but it looks blocked: I can't even put my cursor in it, I am able to merely shrink the size if I shring it for the whole document's footnote text.

I have tried to create new documents, but still the page numeration goes wrong again even in those, with the number skipping; i have even tried to create two different documents but as soon as I unify them the number is still skipping.

Please help, it's quite urgent!

Thank you very very much!

PS: I am using microsoft office word (docx) from university 365 etc., Mac version (Macbook air). I bought it in the US, but right now I am in Italy, my home country.

For Jeeped: Please help... end tag mismatch..can't open docx file (notes mc:Fallback)

Posted: 05 Jun 2014 11:21 PM PDT

Jeeped: help! having similar problems with my file - can't open it anymore and getting this error message: 

tried opening it using an xml editor and what i got was this: 

I want to learn how to correct it to avoid recurrence but right now I need to submit a file that can be opened... 

help please? thank you... i've attached the dropbox link here..

https://www.dropbox.com/s/8abt42y3weff06d/140508%20DdN%20Leadership%20Dev%20Trng%20Report%202.docx

 

How to insert a List of Figures in each section?

Posted: 05 Jun 2014 09:54 PM PDT

I have found the way to insert a TOC for each section but can't find the process for a LOF. 

Using compare with embedded Visio diagrams

Posted: 05 Jun 2014 05:23 PM PDT

I have some Word documents with embedded Visio diagrams. When I compare the documents to a previous version. the word compare tool thinks that I've deleted and inserted the Visio diagrams when the diagrams haven't changed. This is really annoying because I then have to check the diagrams for changes when there aren't any.

Is there any way that I can change this behavior? I don't remember seeing this with a previous version of Word but I wasn't using document compare as much.

In the latest case, I opened a document with diagrams. Then I made three changes in a table at the end of the document. When I did a compare, it said that I had inserted and deleted the diagrams in addition to the changes that I really made.

I've also seen compare say that the formatting changed when I can't tell what the change was.

I'd really like this compare function to be more reliable about detecting what actually changed.

MS Word 2010 glitch?

Posted: 05 Jun 2014 05:15 PM PDT

Building a series of pamphlets in Word 2010, each as a different file.  Normally body content jumps over headers and footers.  Of six pamphlets, suddenly the last three  have this item: The body text is seen passing through the headers and footers.  When I enter a field (from the Insert dropdown) for page number or filename, for example, the code appears and not the info I want.  These two occurred together in the same file so I guess they might be related.  Help.

Word 2013 error message keeps occuring

Posted: 05 Jun 2014 04:20 PM PDT

Every time I try to open word an error message pops up saying that word ran into a problem trying to open and that it needs to be closed. This problem started yesterday. I've tried trouble shooting, reinstalling.... I have no idea what's going on. Any suggestions?

Mail Merge to Email with Mail Format, Attachment, being a PDF file

Posted: 05 Jun 2014 04:19 PM PDT

I have been able to successfully send a merged formatted letter as an e-mail attachment to individuals on an e-mail list. But I would like to try this a different way since all my recipients will likely prefer a PDF file rather than a Word file.

  1. How can I create a merge that attaches a PDF version of the source document?
  2. How can I include an e-mail message in the sent e-mail message with the attachment. In my testing, when the e-mail goes out, the message is blank. The only way the recipients will have a clue as to what this is would be by reading the subject line and the file name of the attachment.

Thanks in advance for any help.

Janell

Posted: 05 Jun 2014 03:11 PM PDT

I just purchased word and can't activate it.  Now what?  I made the purchase and it charged me, but cannot get it to download.  Help

Need to make room in my partition with Kernel and boot up stuff... - Forums Linux

Need to make room in my partition with Kernel and boot up stuff... - Forums Linux

Need to make room in my partition with Kernel and boot up stuff...

Posted: 25 May 2006 02:49 PM PDT

> com writes:
 
 
 
 
 
 

 
 
 

It looks like you skipped this paragraph: "I should still have plenty of room. Where did all the
disk space go? Or is it another partition/directories? When I downloaded and installed the newer
Kernel, it said I ran out of disk space so it never finished so I had to clean up the mess. I
assume it needs extra room for temporary stuff (extractions?)?"

See the part where it said I ran out of disk space during installation/extraction after
downloading.
--
"Be thine enemy an ant, see in him an elephant." --Turkish Proverb
/\___/\
/ /\ /\ \ Phillip (Ant) @ http://antfarm.ma.cx (Personal Web Site)
| |o o| | Ant's Quality Foraged Links (AQFL): http://aqfl.net
\ _ / Please remove ANT if replying by e-mail.
( )

How to enable unprivileged user mount and unmount removable devices

Posted: 24 May 2006 05:42 AM PDT

You just need to edit fstab and change "owner" to "users".

Example

/dev/hdb /mnt/cdrom iso9660 defaults,noauto,owner 0 0
/dev/hdb /mnt/cdrom iso9660 defaults,noauto,user 0 0

Why do I have to run modprobe usbhid to connect to my APC UPS?

Posted: 23 May 2006 07:47 PM PDT

com wrote: 

No, no one knows. Just add "usbhid" to the bottom of /etc/modules to fix
it permanently.

Do a "man 5 modules" too.

Location of Kernel modules

Posted: 23 May 2006 04:12 AM PDT

> You need to change the kernel version, I can't tell you how for SuSE 

I did that
old: 2.6.11.4-21.11-default
new: 2.6.16-default

All the filenames seem OK now, and the 2.6.16-default (not by Suse, but
from Kernel.org) works OK.

The problem is that after "make install" I can't boot the SuSe Kernel
any more, as insmod now tries to access the "2.6.16-default" modules.

Before playing with the kernel.org sources I already seemingly
successfully recompiled the SeSe kernel. So I should be able to do "make
install" with same.

After that the vmlinuz-2.6.11.4-21.11-default this "make install" copied
to boot runs fine (verified by uname -r).

Now trying 2.6.16-default again ....

and it works OK now, too (verified by uname -r).

The only difference is that I did "make install" for the original SuSe
installation for the first time now.

So I suppose the original suggestion that /proc/version delivers the
information directly from the Kernel and that insmod uses proc/version
seems correct. (I _could_ verify this from the sources....)

Thanks a million ! I did learn a lot about this stuff from the
discussion in any case !

-Michael

Strange problem with fedora

Posted: 22 May 2006 04:39 PM PDT

Sorry for the problem.
However, if I connect a router everything is working.

ystem recognizes CompactFlash card but won't mount it

Posted: 22 May 2006 07:10 AM PDT

On Mon, 22 May 2006 09:10:11 -0600, Douglas Mayne <localnet> wrote:
 
.... 

Slackware rulez ;)

dmesg:
cs: memory probe 0x0d0000-0x0dffff: clean.
hdc: KTC CF, CFA DISK drive
ide1 at 0x100-0x107,0x10e on irq 4
hdc: attached ide-disk driver.
hdc: 2031120 sectors (1040 MB) w/0KiB Cache, CHS=2015/16/63
hdc: [PTBL] [503/64/63] hdc1 hdc2
ide_cs: hdc: Vcc = 5.0, Vpp = 0.0

mount:
/dev/hda3 on / type ext2 (rw)
proc on /proc type proc (rw)
/dev/hdc2 on /usr type reiserfs (ro,noatime) <<== CompactFlash

Cheers,
Grant.
--
Memory fault -- brain fried

Are there any "temp" or "trash" folders with deletable files ?

Posted: 22 May 2006 06:37 AM PDT

In comp.os.linux.misc, on Wed 24 May 2006 11:37, The Natural Philosopher
<a@b.c> wrote:
 

No, in that case it would be more likely to be over two ;-)
--
Robert
This information provided free of charge for those willing to accept
it. Others who wish to be spoon-fed may acquire my services at the
discounted rate of 135 GB Pounds per hour or part thereof.

Unable to use my USB devices in Debian anymore...

Posted: 21 May 2006 09:34 PM PDT

In comp.os.linux.hardware Whoever <none> wrote:

 
 
 
 

OK, I got it resolved with the help of apcupsd mailing list, but one remaining issue. See
http://tinyurl.com/ky6k7 or
http://groups.google.com/group/comp.os.linux.hardware/browse_thread/thread/2a979b1314703c61/e298799b638e06cd?tvc=2&q=antant%40zimage.com&hl=en #e298799b638e06cd
.... I don't know why I had to run modprobe usbhid to make it work. I never had to do that
before, but then I upgraded a lot during 142 days (I recall udev replaced hotplug or
something). Anyways, go to that thread and see the details and reply. :)
--
"Be thine enemy an ant, see in him an elephant." --Turkish Proverb
/\___/\
/ /\ /\ \ Phillip (Ant) @ http://antfarm.ma.cx (Personal Web Site)
| |o o| | Ant's Quality Foraged Links (AQFL): http://aqfl.net
\ _ / Please remove ANT if replying by e-mail.
( )

Loading Linux - error LIL - using SCSI RAID-1

Posted: 21 May 2006 08:42 PM PDT

com wrote: 

*Why*?

RedHat 7.x is way, way, way out of date. Is your hardware extremely old or
underpowered or something? And are you doing the updates from
fedoralegacy.org?
 

My monitor went black in Linux/Debian (X) and text mode earlier today...

Posted: 21 May 2006 04:29 PM PDT

> >>> About over an hour ago, I was watching a long video (FLV file; not fullscreen) for about 30 minutes in GMPlayer on 
 

Oh, that was a side story. I was doing something else. But I doubt that can cause the probelms I had on my Linux
box.

 

Well, I wished I could read the SMART info, but I think this Seagate Barracuda 7200.7 Plus ST3120026A 120 GB (8 MB
cache; 7200 RPM) HDD, that SpinRite was working on, has limitations. It is connected via VIA SATA Controller
(onboard Promise controller just won't boot up Windows XP 100%). So, no SMART information, temperature readings,
etc. Even SpinRite said that too. Just remember, I have three internal HDDs and two CD/DVD drives. Anyways, this
is another subject and off-topic.

 

It was only a side story and off-topic. So ignore it. :)

 

Maybe, but I never had that problem before with all NVIDIA driver releases. It still doesn't explain why I
couldn't see anything in text mode and after reboots until I powered down the machine for a few minutes.
--
"Be thine enemy an ant, see in him an elephant." --Turkish Proverb
/\___/\
/ /\ /\ \ Phillip (Ant) @ http://antfarm.ma.cx (Personal Web Site)
| |o o| | Ant's Quality Foraged Links (AQFL): http://aqfl.net
\ _ / Please remove ANT if replying by e-mail.
( )

GRUB causing boot problems

Posted: 20 May 2006 07:11 PM PDT

com wrote:
 

Certainly sounds like your CD drive is the culprit ... but I don't
see how Grub could screw up a CD drive or alter the BIOS firmware.

howto delete virtual network interfaces?

Posted: 20 May 2006 10:33 AM PDT

thanks a lot, Michael Heiming

the way, you described worked successfully.

ralf moosandl

Microsoft CRM - Evaluation

Microsoft CRM - Evaluation

Evaluation

Posted: 05 Feb 2005 11:17 AM PST

There are several possibilities.

Some of the partner websites including www.bullseye.com.au have environments
running where you can try out MS CRM.
If you get the Action Pack, in there there will be CDs for Ms CRM and all
the required stack software. Then all you need to do is find the hardware,
install everything and you're ready.
If you contact a Ms CRm partner, they will likely do a demo for you.

Where are you based? If you are Australia based, please contact me directly
on com.au and I'll try to help further.

Hope that this helps

Gill





"Trainer-Mac" wrote:
 

poject based access in CRM ?

Posted: 04 Feb 2005 07:01 PM PST

Simon,

Sharing records to a team is a manual process. So the creator of the record
needs to explicitly share it with a specific team. This is why I felt the admin
might become pretty intesive over time (you can't delete teams, so the list will
get pretty big).

I don't remember seeing any stock reports that bring teams into the reports, but
you could probably develop some custom reports to get what you need. You'd also
probably want to consider some custom forms to allow filtering by team. All in
all, this seems like a square peg round hole type of thing.

There are products out there that have more of a project focus that you might
want to look into. I Know you can do things with Sharepoint like porject
workspaces that allow you to store documents and contact lists that are roject
specific. You can grant users access to multiple projects and they basically
log into a specific project to work in. This is probably a better starting
point for what you want.

I guess it really depends on what your specific reqs are and then you need to
evaluate which products best fit your needs and which can be customized most
cost effectivlely to fit the gaps in the features.

Matt Parks
MVP - Microsoft CRM

----------------------------------------
----------------------------------------
On Sat, 5 Feb 2005 16:44:40 +1100, "Simon" <net> wrote:

Well, that was pretty dissapointing.
Anways, i liked your suggestion, - using TEAMS.
But this may not work.
Cuz consider for example a user "A" belongs to two teams "1" & "2".
Now when he logs in, & creats a record (esp an Account), then what Team will
this record belong to.
I need to be able to completely seperate all the data into projects.
So when reporting too, i could specify the projects (or in your case the
Team).

Then again, am i missing something, will ur suggestion overcome the above?

Thanx.

"Matt Parks" <com> wrote in message
news:com... 
heard 
into 
pretty 
source 
applies 
UN-Shared 

CRM developer

Posted: 04 Feb 2005 12:08 PM PST

Hi Joe,

We are a Microsoft Certified Business Solutions CRM partner with good
experience in this area. Please contact me directly at 650.504.4640
(cell) or com

best regards

Sundar Nathan
Business Development
Khaga Technologies
650.504.4640 (cell)

Is it wrong is SDK post-callout Tutorial?

Posted: 04 Feb 2005 10:09 AM PST

I should be awarded the Nobel Prize, shouldn't I ?


"Matt Parks" wrote:
 

Differences between Outlook and Web Sales?

Posted: 04 Feb 2005 09:13 AM PST

Key differences:

SFO has:
- ability to go offline with the data
- Mail Merge features with Word
- Only supported integration for Tasks, Appts, Contacts into Outlook/Exchange

Web client has:
- Service module
- Admin functions
- Reports

Matt Parks
MVP - Microsoft CRM

----------------------------------------
----------------------------------------
On Fri, 4 Feb 2005 09:13:06 -0800, "Simon" <microsoft.com>
wrote:

Has anyone compiled an analysis that shows the functionality differences
between the Outlook and Web client versions of MS CRM? i.e. what's available
in one but not in the other?

Post Installation problems

Posted: 04 Feb 2005 12:13 AM PST

Hmmm. Dunno then. :(

"Greggo" wrote:
 

MSCRM 2005 - Active Directory...

Posted: 03 Feb 2005 08:13 PM PST

I haven't heard the same. But I could be wrong, it's happened once or twice
before :-)

I do know the security reqs are being reduced quite a bit so you won't need a
Domain Admin for install and stuff like that. So a lot of the pains experienced
today will be going away.

Matt Parks
MVP - Microsoft CRM

----------------------------------------
----------------------------------------
On Fri, 4 Feb 2005 12:08:49 -0600, "Jake Horn"
<com> wrote:

You sure about this Matt?

I heard a long time ago that ADAM and less stack dependence would be a part
of the next release.

If the stack dependence does not change, I will be somewhat dissappointed.

"Matt Parks" <com> wrote in message
news:com... 

how to find the last modified user?

Posted: 03 Feb 2005 05:26 PM PST

Once you've pulled up the record, if you go to File..Properties, it shows the
user that last modifired the record.

Matt Parks
MVP - Microsoft CRM

----------------------------------------
----------------------------------------
On Fri, 4 Feb 2005 12:26:09 +1100, "Simon" <net> wrote:

Is it possible in CRM to determine who last modified/altered a particular
record (of any entity)?
Esp, who last modified the details of a particular contact?

Thanx

Problems with exchange - mails incomplete

Posted: 03 Feb 2005 09:58 AM PST

Hi Jakob

I already looked in Registry Editor of the crm server and I only notice this
repeat value

exwebsite = /LM/W3SVC/1
website = /LM/W3SVC/1

Could this be the reason ? I haven't looked in Registry Editor of exchange
because the Server Administrator isn't in the office but tomorrow I will look
and let you know ...

I really appreciate your help i haven't found someone who look this problem
before ...

Tnks !!


"Jakob Benediktson" wrote:
 

Some people can't promote from sent items

Posted: 03 Feb 2005 09:47 AM PST

I thought the same thing. He can promote inbound no problem. Testing on my
machine works fine no matter how the email is sent: internet address,
contact, whatever.

"Gill" wrote:
 

Realistic Data Migration Costs

Posted: 03 Feb 2005 05:40 AM PST

Thank you all very much. Those were my thoughts but really needed to
check this. And no Matt, there was no data cleansing involved.

The company who quoted me this is an MSCRM Certified Partner.

Thank you to each of you for your comments and feedback - really
appreciated.

Activities of the week on homepage

Posted: 03 Feb 2005 03:29 AM PST

Hello!

Why don't you try our Add-On GroupCalendar. With
this Add-On you ar able to see the activies of
-) a DAY
-) a Week
-) a Month

You also can choose which type of activity you want to see
and there are some more thing you can configure!!

Go To www.mscmr-addons.com and download a trial-version!

--
Christian

com
www.mscrm-addons.com
Your company for MS-CRM ADD-ONS!
GroupCalendar for MSCRM
Related Documents for MSCRM
WordMailMerge for MSCRM

"John O'Donnell" <com-nospam> schrieb im
Newsbeitrag news:phx.gbl... 

SFO client install error

Posted: 02 Feb 2005 10:51 PM PST

having the same error, and I have followed everything that I have found
searching through the forum. Get the error when it is "creating and
configuring databases"

"Nathan Warner" wrote:
 

schema field definition

Posted: 02 Feb 2005 08:55 PM PST

Hi,
I can't find the definition in the sdk. Can you tell me more information
regarding the definition in the SDK? I use the MS CRM version 1.2 SDK.
Thank you

"John O'Donnell" wrote:
 

Different Contact forms in the one deployment

Posted: 02 Feb 2005 05:49 PM PST

Point taken Matt about the learning, but you, Jake and a few others
still do a brilliant job - thank you!

Create new Letter templates

Posted: 02 Feb 2005 04:17 PM PST

No. Do you have any advice.

Thank-you

Julie

"Anon" wrote:
 

Change Cascade Behavior for Assign/Share in CRM2.0 - Your input ne

Posted: 02 Feb 2005 11:55 AM PST

I can't see why you can't have the best of both worlds here?

Territory reassignment/realignment is a big feature in most other systems
and you need the be able to do it on a record and mass level.

First off, warn the user of what they are about to do. Many users reassign
an account and don't even think about the implications.

Second, enable an organization to assign a generic reassignment rule,
perhaps that is part of the warning, for company A who choses for only the
accounts and contacts to cascade, then it would warn.

"You are about to reassign this record and the following other associated
record types:

List out cascade rule.

Are you sure?

"Yes" "No""

Then you will need a mass reassign area for administrators where you can get
more granular, Choose the accounts based on filter then specify the cascade
rule perhaps.

"Matt Parks" <com> wrote in message
news:com... 

Formatting phone numbers in CRM via background service

Posted: 02 Feb 2005 08:45 AM PST

Yeah. The CRMQuery calls can be fairly slow. The query first needs to be
validated against the metadata. And returning a lot of data can make it appear
slower as well since it needs to wrap the data into XML.

Matt Parks
MVP - Microsoft CRM

----------------------------------------
----------------------------------------
On Thu, 3 Feb 2005 11:43:03 -0800, "Jeff L." <microsoft.com>
wrote:

"Unsupported" typically scares the boss, so I guess I'll stick with the SDK
for updates. I have everything written and I'm preparing to run the program
in our test environment. Pulling the data straight from SQL made an
unbelieveable difference (not really surprised though).

"Matt Parks" wrote:
 

SFO Installation Error

Posted: 02 Feb 2005 05:57 AM PST

I had check through the list that "Razorback" had put together (twice) and
still get this. In addition, it fails specifically "creating and configuring
databases". I have also tried deleting the SQL directory that it creates on
the pc and tried again. But still the same.

"Peter Lynch" wrote:
 

PostUpdate. How to get old-value?

Posted: 02 Feb 2005 05:15 AM PST

I agree. Many auditing reqs require both the old and the new value. This helps
to identify a "lost" audit record or whether or not a record may havebeen
modified directly in the DB.

In addition, there are some business logic cases in a post-callout that would
require both values. For instance, changing the Relationship Type of an account
from Prospect to Customer may dictate a process, but changing it from "Gold
Customer" back to Customer would not dictate that same process. The only way to
make this determiniation is to have the old value.

Matt Parks
MVP - Microsoft CRM

----------------------------------------
----------------------------------------
On Wed, 2 Feb 2005 23:19:31 -0600, "John O'Donnell"
<com-nospam> wrote:

one scenario would be auditing...you might want to say field x was changed
from value1 to value2

Required rights to view all account

Posted: 02 Feb 2005 04:36 AM PST

thanks, I'll try those tips.

Sync Issues with Sales for Outlook Client

Posted: 01 Feb 2005 10:05 PM PST

Only 1 crm user can synchronize per computer, right? If a different user
signs onto the machine and tries to synch, doesn't the MSDE database only
have the offline data for the first crm user?


"JawKnee" <microsoft.com> wrote in message
news:com... 
application. 
think 
installed 
trouble 
see 
we 
encounted 

Microsoft Word - Search for highlighted text

Microsoft Word - Search for highlighted text

Search for highlighted text

Posted: 05 Jun 2014 02:36 PM PDT

I highlight text in my Word documents so I know which sections need review.  How do I search the document for highlighted text?

Unable to access Microsoft Word

Posted: 05 Jun 2014 02:13 PM PDT

why is it I can not access Microsoft word

Changing font

Posted: 05 Jun 2014 01:12 PM PDT

I hit some key  that now makes all my documents in a huge font.  Anyone know what I might have hit?  How do I change that so I can control the font.  Trying to change from the menu has not worked.

How do I insert Austere Quote Textbox in Word 2010. This text box is not available and I am not able to find it on

Posted: 05 Jun 2014 01:08 PM PDT

I am not able to insert Austere Quote Text box in Word 2010 Gallery and I am not able to insert it from Office.com.  I found some information on the internet, and I am wondering if this is a 2007 text.

How do I insert Austere Quote Text box?

Thank you.

First line indent in Word for iPad

Posted: 05 Jun 2014 12:25 PM PDT

Is there an option for first line indent in Word for iPad?  This seems like basic functionality that should be available, but I can't find it.  iPad doesn't have a tab key, so there really seems to be no way to indent other than hitting spaces repeatedly which would be a huge step backward....like to the typewriter age!

Thanks,

Tim

How to copy styles from an old, completed document to a new, empty document?

Posted: 05 Jun 2014 12:05 PM PDT

I recently published a book, and I am starting on another one. I would like to copy the styles from the final edited manuscript of the first book into a new, blank document in which I will begin to write the next book. I want to do this because the final edited manuscript of the first book contains all of the publisher's style specifications (American Psychological Association style), which would be excruciating to re-create manually in the new document.

What is the easiest way to reliably do this?

Thank you for your help.

Word 2010 - Auto Correct - Can't Add Symbols

Posted: 05 Jun 2014 11:57 AM PDT

I want     ``x     to autocorrect to the Wingdings checkmark symbol.  When I try to set it up in autocorrect, I can't paste the checkmark symbol.

Multiple Selection Listbox

Posted: 05 Jun 2014 11:53 AM PDT

I can see how to add a drop-down list content control to a Word 2013 document, but is there a way to set it up to select more than one item in the list?

Word 2007

Posted: 05 Jun 2014 11:06 AM PDT

 - is it possible to change multiple documents from the .doc extention to .docx

Incorrect correction for proofing error.

Posted: 05 Jun 2014 09:47 AM PDT

I had a proofing error and the bit of sentence i put was "and Known Fact" the correction list said And And Known Fact. Can you help me fix the spelling and grammar checker? 

Cannot find a way to print customized screen tips using Word 2010.

Posted: 05 Jun 2014 09:03 AM PDT

I've a word 2010 document in which I've placed in a number of bookmarked screen tips. They display fine as they're hovered over, but how do you get the document to print the tips on the side?

# 12 envelope

Posted: 05 Jun 2014 08:39 AM PDT

How can I get Word to print a simple # 12 envelope. I tried putting in the size and it says paper mismatch.

If statement in Format Picture Alt Text

Posted: 05 Jun 2014 08:23 AM PDT

I currently have a url in the format picture alt text box  which goes out to read a signature file for check printing.

 url:/appl/print/sig/1001.  this is all that is in the box and it works fine

Now I need to print a different signature if it is coming from a different account which is url:/appl/print/sig/2001

How can I use an if statement to accomplish this? 

thanks K.

Different Dates on each page.

Posted: 05 Jun 2014 07:38 AM PDT

I have a datasheet that I make that needs to be completed every day each month.  Is there a way to Automatically place the date in the Header for each page?  For example:

I make one word document with 25 pages (Monday - Friday, 5 weeks). 

Each new page will have a different date, for example:

page 1 header - june 2

page 2 header - june 3

page 3 header - june 4

page 4 header - june 5

page 5 header - june 6

page 6 header - june 9 (start of new week)

Is there any way to automate this?

Check spelling is not working in word 2013

Posted: 05 Jun 2014 05:50 AM PDT

i have tried everything from the link http://answers.microsoft.com/en-us/office/forum/office_2013_release-word/spell-check-is-not-workinghow-do-i-turn-it-on-ms/8f731085-98da-42f5-944b-4276836ee1a8

no use not yet i got :-(

Please help me here i have attached the some reference pictures 

 

Change author name to hide identity in track changes

Posted: 05 Jun 2014 05:06 AM PDT

Hi,

We want to send a word file and in track changes mode but remove all authors and set one generic name. In previous versions, I could do that by changeing my name in File > Options > General, > Username.

I tried to run the Inspect document but still in vain.

Any thoughts?

Thanks a lot in advance

Word 2007 'ghost' page

Posted: 05 Jun 2014 03:12 AM PDT

H,

I am running Windows 7 32bit with Office 2007 Student.

Whenever I open a saved Word file a second 'ghost' blank Word file opens as well. This second file is a blank document and the page and tool-bar are 'greyed' out. The tabs on the tool-bar do operate but that is all, the tool-bar itself is frozen.

Closing this 'ghost' file has no impact on the already open document file and closing that file has no impact on the 'ghost' file, that remains open. 

Any assistance would be appreciated.

Word is not working?

Posted: 05 Jun 2014 02:00 AM PDT

I keep getting this message when I try to open a document or even just open word as an application.

I have tried uninstalling and reinstalling Office 2013 but still cant use it ? Please can anyone help?

word wont open

Posted: 04 Jun 2014 11:54 PM PDT

everytime I go to open it says were sorry but word has run into an error it prompts me to choose help repair now cancel. I click repair now and nothing happens. plz help

How do I stop character style applied on entering/typing text in word.

Posted: 04 Jun 2014 10:57 PM PDT

If I key the text in MS Word, the word property automatically applied the style from the followed text style(character style). Is there is option to stop the property?

Unicode Input in Microsoft Office (Word and Onenote) Becomes Boxes

Posted: 04 Jun 2014 09:49 PM PDT

Hello,

I am having issues inputting math symbols via the ALT+[Numbers] method. After I select an appropriate font (Cambria Math) and proceed to enter my key strokes for the symbol, I get a box instead of the symbol I need.

I can enter the exact same symbols via Insert - Symbol from the menu bar but I prefer to use key strokes. These key strokes work in NotePad and Firefox. The key strokes fail to work when I use any Microsoft Office product or the File Explorer.

Some sample symbols:

Alt +2200: ∀

Alt +2295: ⊕

Alt +2227: ∧

Any guidance is appreciated.

Ordinal 294 error accessing Internet Explorer and Word.

Posted: 04 Jun 2014 09:27 PM PDT

Hi everyone. I am having troubles with my computer. I have the sims installed and when I go to launch it, I get the following message:

The ordinal 294 could not be located in the dynamic link library

C:\Windows\SYSTEM32\ieframe.dll

Now, I have figured out a way to play the sims with this message. This is not the problem anymore. I have tried to open internet explorer as well as Microsoft word today and neither worked. I am assuming it has something to do with this message as both worked fine a month or so ago (before the message popped up) and this is the first time i have tried either one since. Is there any "quick" fix for this? I would take my laptop in as it is covered under warranty but they will take 10-14 days and I have an online class with the final coming up in two weeks and I need my laptop now. I can take it in after the test but need it to work for now. I have windows 8. There is also problems with the user profile service everytime my computer goes to update and I have to reset the computer back to a date that it worked (what its called isnt coming to me at the moment). Now thats another problem all on its own and im just looking to fix this ordinal so I can have microsoft word back. I have office 365 that I pay monthly for and yes, my account is still being charged. When I go to open word, nothing happens. It then gives me the option of opening in safe mode and then does the "windows is searching for the solution" but never finds one. Any suggestions would be great. 

*Original title: Ordinal 294

Word 2010 Cross References

Posted: 04 Jun 2014 08:04 PM PDT

Hello,

I need to create cross references to the "Section" references in my document (screenshot below), and I'm not sure how to set them up.  Can someone please explain how this is done.  Thank you.

1.1       Definitions.  As used in this Agreement, the following terms have the meanings ascribed thereto below:

"Accounting Principles" means GAAP applied using the same accounting methods, practices, principles, policies and procedures that were used in the preparation of [the unaudited consolidated balance sheet of the Company Group as of December 30, 2013[1]], to the extent such methods, practices, principles, policies and procedures were in accordance with GAAP, subject however, to the adjustments set forth in the Reference Statement[2].

"Acquiror Indemnified Parties" has the meaning given in Section 11.2(a).

"Advertising Funds" means the marketing and advertising funds set up by the Company or any Subsidiary pursuant to the Franchise Agreements.


[1]      Note to Draft:  To be confirmed.

[2]      Note to Draft: Subject to Parent review of such statement.

Issues with Word 2013.

Posted: 04 Jun 2014 06:39 PM PDT

Original Title: *** Email address is removed for privacy ***

Hello...goodbye....thank you all

Word for iPad Crashes on Edits

Posted: 04 Jun 2014 05:53 PM PDT

I am using Word for iPad on the latest iOS on my iPad 4. I have numerous documents originally created in Word for Mac that now reside in OneDrive. I have noticed on many documents that when I perform an edit to the text, the app crashes. Actually, not only does the app crash, but it crashes the entire iOS! 

I have reinstalled the app and tried closing all apps but Word for iPad. Sometimes this happens when I am trying to paste text, selecting a point in a sentence and typing, and hitting return to make a new line in an outline.

It should be noted that all the documents with this problem are using styles for outlining. Heading 1-7 provide the outline I., A. 1). etc. The last crash that just occurred happened when I selected a point at the end of a sentence in the outline and then hit return to put it on a new line. It crashed the app and crashed the OS.

UPDATE: Ok, I was just able to reproduce the crash. It occurred when I selected a portion of a sentence in a Styled Outline and hit return to move the remaining text to a new line. It crashed the app and the OS. Illustrated below:

THIS IS WHAT MY DOCUMENT LOOKS LIKE:

I. <Heading Style 1>

   A. <Heading Style 2>

       1. <Heading Style 3> Here is an example line of text. [**I PLACED MY CURSOR HERE AND PRESSED RETURN TO PUT THE REMAINING TEXT ON A NEW LINE. THE APP AND IOS CRASHED**] Another example of a line of text.

I hope that someone can help me. As of now, the Word for iPad app is unusable to me. I was able to duplicate the crash with the "Send Crashes to Microsoft" setting to "On" in the General Settings. It occurred around 7:30pm MST, 6/4/14. Thanks.

word 2013 Autotext

Posted: 04 Jun 2014 04:51 PM PDT

Hello from Steved

I have installed Word 2013 after using Word 2010

My issue is Autotext Word 2013

In word 2010 I could put the cursor where I needed the autotext to be and it would insert the autotext,

but now I get the below situation

FixedOdds$1.85

Days1     28   Days2     308

Where as in Word 2010 I got the below

Days1 28  Days2 308 FixedOdds$1.85

Could you please advice me what I need to do please to have it behave the way it did in Word 2010

Thankyou.

How can I assign a key to a macro that is already used for something I don't need?

Posted: 04 Jun 2014 04:47 PM PDT

How can I assign a key to a macro that is already used for something I don't need? I want to use F2 and F3 for two very short macros, ones that I created and used in XP, but I can't get them to work in Windows 8 because those keys are already assigned to things I don't use.  Can I delete their defaults and make them what I want them to do?  What I'm trying to do is make highlighted text red when I hit F2 and F3 makes highlighted text black. I'm using Office/Word 2013 with Windows 8 on a desk top.  I know I could put it in the Quick Access Toolbar but I prefer a keystroke.  I also tried Alt+b for black but that did not work either.  That does not show up as being assigned but it seem to be formatting. Any help will be greatly appreciated.

Steve

WINDOWS 7...LINE SPACING

Posted: 04 Jun 2014 04:38 PM PDT

When I type the inside address of a letter, it is automatically double spaced.  I have tried every suggested method of setting it to single line spacing and it doesn't change.

Word 2007 does not update fields or linked data when printing

Posted: 04 Jun 2014 04:03 PM PDT

At one time, Word 2007 would automatically update fields and linked data. I set up a large collection of documents that would pull information from other documents and from Word's document properties, and having the updates performed automatically was a great time saver.

A few years ago, both options stopped working, so now, every time I want to print a set of documents, which often include more than a hundred files, I have to manually update the fields.

Our IT department said this is a known problem associated with a Windows service pack, but I'm not sure.Is that true? Is there some way to restore those functions?

I believe these are the correct settings:
Subscribe to: Posts (Atom)