Pages

Search

Looking for Slack 10.1 drivers for an AOpen motherboard on a Sis Chipset - Forums Linux

This summary is not available. Please click here to view the post.

Microsoft CRM - CRM RAID Setup PLEASE HELP

Microsoft CRM - CRM RAID Setup PLEASE HELP

CRM RAID Setup PLEASE HELP

Posted: 05 Aug 2004 04:09 AM PDT


"Diogo Monteiro" <microsoft.com> wrote in message
news:092501c47ae4$76c63590$gbl... 

ITS for redundancy. Of course its not needed as a requirement, not would CRM
tap in to be able to tell.
But if you're system drive goes down its up to you to ensure 24x7
availabililty however which way you like.
If its testing, it doesnt matter.

Tony

Adding fields to account table

Posted: 04 Aug 2004 06:55 PM PDT

Whoops. My bad.

But you'd think they'd use a prefix: "vAccount" :-)



"Matt Parks" <com> wrote in message
news:com... 
unlike 
wrote: 
filled 
the 
detail: 
-- 

Pop-Up Blocker blocks CRM

Posted: 04 Aug 2004 05:27 PM PDT

John O'Donnell: Well done on the FAQ page! I've bookmarked it for future reference. Off-topic: have you done any testing with XP SP2 beta and the CRM workarounds/update? The workarounds don't look like too much trouble. I'm more concerned with how SP2 is going to change the user's non-CRM experience...
--
Matt Wittemann


"John O'Donnell" wrote:
 

How update entity in post update?

Posted: 04 Aug 2004 01:43 PM PDT

I think who you don't understand what is the problemn.

Last draft the application flow:
1. The user open a Opportunity record and edit some data then he submit the
changes
2. The PostUpdate are fired.
3. I get the OrigObjectXML and calculeted some fields based on other
fields...
4. Into my PostUpdate I call the Update method of the CRMOpportunity class.
5. This call fire again the PostUpdate method and we are in a recursive
infinit loop!

Now you understand the PostCallout issue?

Than you for your attention, Matt.
[]'s
Vinícius Pitta Lima de Araújo.

"Matt Parks" <com> escreveu na mensagem
news:com... 
and 
recursive 

Security: Append To & Append

Posted: 04 Aug 2004 01:00 PM PDT

Are we sure we've got this right?

The definitions provided seem to run counter to the documentation.

Here is what the SDK (CRM Object Model | CoreSystems Management | Actions on Objects) says:

Append - Objects can be added to the object in question. For example, a note can be added to an opportunity if the caller has Append rights on the opportunity.

Append To - Append To is the opposite behavior from Append. In this case, the object in question can be appended to another object. For example, a note can be attached to an opportunity if the caller has Append To rights on the note. (Append To can also be thought of as "Attach").

To use Ilana's anaology: we would need Append on the wall and Attach (AppendTo) on the Post-It.

I guess the only way to know for sure is to test. I will try to do so later today and let you know what I find out.





"John O'Donnell" <com-nospam> wrote in message news:phx.gbl...
here is the definative word on APPEND and APPENDTO

What exactly do the Append and Append To privileges provide to the user above the Write privilege?

Resolution

Below is an example and some definitions that will provide information on these privileges.

Joe User needs to accomplish two things:

1. Joe needs to change the Mobile Phone Number for one contact, Syed Abbas.

2. Syed is the purchasing manager for Bike Universe. Joe also needs to associate Syed's contact record with the Bike Universe Account.

Write privileges should be granted to users that need the ability to add or change information to the record. Changing a Contact's (Syed's) Mobile Phone Number or City are examples of how Write privileges are used.

Append Privileges are used when the specific record needs to be associated with another record. If Joe User has Append Privileges on Contacts, he has the potential ability to associate or add a Contact Record (Syed) to an Account record (Bike Universe), for example.

Append To Privileges are used when the user needs to be able to append other records to a specific record. Joe User also needs the Append To privilege on Accounts in order to associate or add the Contact (Syed) to the Account (Bike Universe).

--
John O'Donnell
Microsoft CRM MVP
http://www.microsoft.com/BusinessSolutions/Community/CRMFaqLanding.aspx


"Dave" <nospam> wrote in message news:phx.gbl...
Ilana:

I spoke without testing but I got my example out of the Installation and Configuration Study Guide for v1.2 (page 425).

If I get a chance I will try to test this tomorrow.

Dave

"Ilana Smith" <microsoft.com> wrote in message news:phx.gbl...
I think it might be the other way around.

To attach a note to a case, you'd need "AppendTo" on cases, "Append" on notes. (Or, as I always think of it, AppendTo on the wall, Append on the Post-It.)

--
This posting is provided "AS IS" with no warranties, and confers no rights.
"Dave" <nospam> wrote in message news:O%phx.gbl...
Sylvie:

Append - you can append other records to this record type

Append To - this record type can be appended to another record type

Example: You need to attach a Note to a Case. You need to have the "Append" privilege on Case and the "Append To" privilege on Note

Dave


"Sylvie" <com> wrote in message news:028e01c47a5d$a3271050$gbl... 

Cert. for non ISV's?

Posted: 04 Aug 2004 12:15 PM PDT

The best exam prep is to attend an instructor led course as you will get the
complete training manuals. If not you need to contact a CRM partner to order
them for you. The exam does make extensive use of the material in the
manuals so these are your best resource in combination with experience on
the product itself.

--
John O'Donnell
Microsoft CRM MVP
http://www.microsoft.com/BusinessSolutions/Community/CRMFaqLanding.aspx


"Chris Patten" <microsoft.com> wrote in message
news:com... 
Besides 

object type

Posted: 04 Aug 2004 08:53 AM PDT

John,

the thing is that i want to run a manuall workflow from my code, there for i
need the id and the type of object on which i will run the WF process.
i dont want the type to be hard coded.

Ron

"John O'Donnell" <com-nospam> wrote in
message news:phx.gbl... 

problem with contacts on sfo

Posted: 04 Aug 2004 07:45 AM PDT

Hello,
I went trough the Go offline process but it still don't
work
help!!!



 
process in the SFO 
<microsoft.com> 

Errors publishing reports

Posted: 03 Aug 2004 08:46 PM PDT

John,

It's logging onto the APS server in the first place that has prompted this
error. I have not made it that far yet as to saving the report onto the
server as the error is perventing me from logging in.


"John O'Donnell" <com-nospam> wrote in
message news:OciWu$phx.gbl... 

Microsoft Business Solutions CRM Mobile Version 1.2 just posted!

Posted: 02 Aug 2004 12:27 PM PDT

foreign langauge versions will be available first quarter 2005.

--
John O'Donnell
Microsoft CRM MVP
http://www.microsoft.com/BusinessSolutions/Community/CRMFaqLanding.aspx


"Jack Nielsen" <dk (Fjern nospam)> wrote in message
news:phx.gbl... 
http://www.microsoft.com/downloads/details.aspx?FamilyID=94d65396-39c4-40be-8afd-34c939ca607b&DisplayLang=en 
http://www.microsoft.com/downloads/details.aspx?FamilyID=bd4af7be-2e9b-4419-922f-6e4eb3fd30d5&DisplayLang=en 

how to pass param in URL (isv.config)

Posted: 02 Aug 2004 12:21 PM PDT

Hi John,

I tested this with a simple piece of ASP to itterate through the QueryString
collection. This is what returns off Account:

oType - 1
oId - {1E5816A4-EF92-4446-BE6E-A2ABF231A88D}

Only the two.


Stephen


"John O'Donnell" <com-nospam> wrote in
message news:phx.gbl... 
if 
and 

Microsoft Word - URGENT MICROSOFT OFFICE 365 HOME PREMIUM ISSUE!

Microsoft Word - URGENT MICROSOFT OFFICE 365 HOME PREMIUM ISSUE!

URGENT MICROSOFT OFFICE 365 HOME PREMIUM ISSUE!

Posted: 23 Nov 2013 02:10 PM PST

I am trying to add my computer to my Microsoft account instead of entering a product key but I keep getting the message that my account isn't associated with the Microsoft product, even though it is. My subscription ends on the 26th. What can I do?

Microsoft Office 2013 won't start

Posted: 23 Nov 2013 01:46 PM PST

I have both 2013 and 2010. I have used 2013 since I installed it and it worked perfectly. A few days ago, I tried opening a file and when it opened, it opened in Word 2010 instead of 2013. I tried opening Word 2013 manually but it wouldn't open. It didn't even give me an error message. It just wouldn't open up. When I try to boot it in safe mode, Word 2010 opens instead and I can't set Word 2013 as default program for anything. Its as if my computer thinks its not installed. This happens with all my Word 2013 applications. I tried repairing but it always says repair failed. What do I do. I am on Windows 7.

Setting up Reipient List for Office 365

Posted: 23 Nov 2013 12:55 PM PST


      Microsoft :


                               How do I set up a Recipient list ?  For example, I want to add John Smith (and his address) to my labels.  Putting his name

                               and address on  a sheet of address labels.


                                                                                                                                                                                              Gary Stanullwich

In MS Word 2010 how do you change the size of the mini translator window?

Posted: 23 Nov 2013 12:13 PM PST

I have recently discovered the translator program in MS Word 2010, including the mini translator: when, however, the mini translator window appears it does so as a small square about 1.5 inches across with no apparent way of enlarging it to show all the text. By contrast, in screenshots of the window in the various tutorials I have seen on-line the window is always quite wide and narrow by comparison: so why this difference? I know that sometimes a program will behave differently in different versions of an operating system and I am using Windows XP: could this be the reason for the difference? Or is there a setting somewhere that allows the window size to be changed? (I am using Office 2010 Pro Plus.)

If I may ask one other question relating to the translation program: when I tried to open the translation in the browser Word insisted on using my old version of Internet Explorer (v6) - which did not work for the translation - rather than my default browser Firefox (25.0.1): is there some way of making Word use Firefox or must I just do without that function (given I don't want IE8)?

Form shading

Posted: 23 Nov 2013 11:43 AM PST

office 2013  word 2013 How do you use form field shading older versions it worked fine?

Cant open saved documents in Word 2010

Posted: 23 Nov 2013 09:58 AM PST

I have Office Starter 2010 saved on my computer. I downloaded the 365 trial because I couldn't see my teachers files and now that the trial is over, I can open previously saved documents but can't edit them. If I start a new document in  Word 2010 then save it, close out of it, then reopen it, it opens in the 365 version and I can't edit anything on it. I tried uninstalling it and no help.

I need help creating a text box

Posted: 23 Nov 2013 08:14 AM PST

Hey,

i have a problem with using text boxes (or maybe there is another tool to do what I need to do but I don't know it).

So, I have these forms for different contracts that need updating.

The form now looks like this:

"This is a contract made between __________, who represents company A and _________________, who represents company B."

 

The lines are made just by using underlined text and clicking space a lot. The problem is that no one knows for sure what to write on the lines except the person who wrote the form. I want to replace the lines with some kind of a text box that would say "Name and Surname" and when you would click on the box you would be able to write your name and surname in the box without erasing what was previously written.

 

Any ideas??

Opening Word DOC files.

Posted: 23 Nov 2013 06:58 AM PST

I've been creating Word DOC files on my computer (Windows Home Premium 7) for the last three years using the installed "Word Starter 2010" program. I also have lots of historic Word files from previous computers. Recently I have noticed that all the DOC files have changed to DOCX files (with the Word 2010 orange coloured icon) and I can't open them from the  "My Documents" folder. The older files open but appear as a string of numbers. They can all be accessed through the "Word Starter 2010" program but I would prefer not to do this. Can all these DOCX files be changed back to DOC?  

Microsoft Word document 98-2003 type contains XSS or something unacceptable to RTE copy and paste to CuteNews

Posted: 23 Nov 2013 06:36 AM PST

Hi

 

This is a difficult one. I have been using copy and paste from Word mainly 2003 to a CuteNews based content management system (CMS) since 2005 without any issues.  The issue is that the document which is similar to one that I published last month can be copied and pasted into the CuteNews 1.4.6 WSIWYG and Saved which should result in the article being published on a web site page. CuteNews shows the article in its editor and can re-open it ok. But the article does not appear on the web page.  There is no error message and Cutenews is still able to publish news. What seems to be happening is that there is something in the doc file that is rejected by the RTE which uses Javascript. I have checked the document for viruses and it is clean. Both documents are meant for the public to read so there is no problem with supplying both documents, last months and this months so someone can compare them.

 

The documents are parish council minutes for September (publishes ok) and October (cannot be published) Both documents contain some material in tables and and are no different in appearance they both print ok. CuteNews has not been altered in any way. The website, I have tried publishing on two sites operate with PHP 5 installed but as I mentioned earlier there has been no other problems. It really does seem that the doc file contains content that is rejected by CuteNews's news editor. I have used Word 2003 under Vista and Word 2007 under XP.

 

MS Word 2010 - slow closing documents

Posted: 23 Nov 2013 06:15 AM PST

MS Word 2010 has recently developed a problem where its intermittently very slow when closing a document. I have tried the Normal.dotm method and run the MS Repair option from the Installation CD and the problem persists. My OS is Windows 7 Ultimate. Can anyone please help?

Word2013 Watermark problem

Posted: 23 Nov 2013 05:55 AM PST

I'm running Office Professional Plus 2013 on a Windows 8.1 (64-bit) desktop computer.


I have a document consisting of the following 3 sections:

Section 1 = title page.

Section 2 = Table of Contents page.

Section 3 = rest of the document (4 pages).


I want a "Draft" water mark for the entire document. I can place a watermark in one section. However, when I place it in a second section, the watermark in the first section is removed.


How do I get a watermark for the entire document?

office 365 will not open any file...

Posted: 23 Nov 2013 02:47 AM PST

Hello

I ve just purchased a office 365 student.

But somehow it will not open any office file,

it claims i have not enough memory, while I use an i7 processor, with 8gb ram.

and many other errors.


Why does it happen?

Unable to open Office 2010 or any associated documents

Posted: 23 Nov 2013 01:40 AM PST

For the past few days I've been unable to Microsoft Word 2010. When I try I get a message saying  'Microsoft 2010 cannot be opened. Check internet connection and try again'. My internet connection is fine. 

I have the original pack - can I reinstall the program, and if so will I lose my existing documents? I have them saved on my laptop and on a memory stick.

This is getting very frustrating - I'm administering my Aunt's estate and have documents I need to access. 

Loss of help files

Posted: 22 Nov 2013 07:40 PM PST

I deleted unused web cache files now when I press F1 the message says help not working. How can I restore the help file.

How can i prevent MS Word (2013) from maximizing minimized windows behind a new document when i open a new MS Word document?

Posted: 22 Nov 2013 06:48 PM PST

Often i have multiple MS Word documents open and minimized so that when i open a new document all the minimized ones are maximized behind the newly opened document. How do i stop the previous documents from maximizing? It is very annoying.


HEre is a link of a YouTube video that shows the problem:

http://www.youtube.com/watch?v=7KKGEMxVYYs&feature=youtu.be


The steps i have followed to troubleshoot the problem include running "Fix It" from this KB article: 

http://support.microsoft.com/kb/921541


Clean boot state following instructions mentioned in this article:
http://support.microsoft.com/kb/929135


Nothing has worked. Any help would be greatly appreciated.


Thanks for your time.

NJ

New Laptop drivng me crazy

Posted: 22 Nov 2013 05:11 PM PST

Ok...I have a new Gateway Laptop not even a week old, Windows 8, I installed Office Student 2010. I can do work on word, but I cannot open any docs or power points in Canvas for my school work to view. Help.......I need to get homework done!!!!!!!!! I do not have Adobe on it. Can any one help me???????

 

Good Witch Glenda

Why the enormous growth in file size from compatibility mode to Word 2013?

Posted: 22 Nov 2013 04:44 PM PST

This concerns a file that began PDF life at 5 MB. It has a lot of math, logic symbols and some diagrams, and the symbols weren't unicode in the originating wordprocessor. Acrobat exported the file to DOCX as 10 MB. Opened and saved in Compatibility Mode in Word 2013, the file remained at 10 MB. Converted to Word 2013 and saved, it became 82 MB.

I've gone through the process 3 times. What could account for the enormous size increase, especially when compared with the next test?

A second file was converted. It was a PDF that this time originated as a scan. As a DOCX export from Acrobat it was 5.6 MB. After being converted from Compatibility Mode in Word 2013, it grew to only 6.5 MB. Yet it too has considerable math.

P.S. Despite taking a long time to load, the first file scrolls fast through its 1100 pages.

MICROSOFT WORD 2007

Posted: 22 Nov 2013 04:29 PM PST

WHEN I ATTEMPT TO OPEN A DOCUMENT FILE I'M UNABLE TO TYPE OR CUT & PASTE INTO MY FILES.  CAN YOU HELP ME?

Creating a Legal Brief with Styles (Word 2010)

Posted: 22 Nov 2013 03:18 PM PST

I am trying to create a legal brief with "points" (major arguments) and "subpoints" (minor arguments within major argument).  I can create the Points; the problem is getting the subpoints to automatically restart numbering after a new point.

I want the document to look something like this:

I.  This is major point 1 (Bolded and capitalized text)
   Discussion
   a.   Subpoint A
         Discussion about subpoint A
   b.  Subpoint B
         Discussion about subpoint B
   b.  Subpoint C
         Discussion about subpoint C
II.  This is major point 2 (Bolded and capitalized text)
   Discussion
   a.   Subpoint A (need to restart as Subpoint A under Point II)
         Discussion about subpoint A
   b.  Subpoint B
         Discussion about subpoint B

How do I force the numbering of the subpoints to automatically restart as "a"?  These points and subpoints get frequently moved around so its important to avoid a process requiring the end user to redo the numbering.

TIA

Rename / replace all Styles in a Word Document

Posted: 22 Nov 2013 03:02 PM PST

I want to have VBA replace all instances of Style "A" in the active document with Style "B".

How is that done?

TIA

Office 2013 :Word and Excel crash when I start them

Posted: 22 Nov 2013 07:03 AM PST

I'm new to Windows 8 and everything that comes with it. But, I'm not new to Windows-previous versions and Office-previous versions.

 

My problem: when I start Word or Excel, it looks like it's going to be okay - giving me template options - but when I pick anything, it says "Word has stopped working and looking for a solution" HELP!! I need to make this a workable PC and I'm hitting a wall.

 

P

 

Old title: Word and Excel crash when I start them

Replication to DC?? Help! - Microsoft Exchange

Replication to DC?? Help! - Microsoft Exchange

Replication to DC?? Help!

Posted: 13 Sep 2005 05:25 PM PDT

Run Exchange 2003 Setup, choose Custom on the top line, then choose to
install only the Administrative Tools below that.
--
Ed Crowley
MVP - Exchange
"Protecting the world from PSTs and brick backups!"

"Lovejoy" <microsoft.com> wrote in message
news:com... 

FE/BE OWA Configuration

Posted: 12 Sep 2005 02:08 PM PDT

Ed,

Somedays it's just that easy. I guess I shouldn't have taken the word from
someone else and looked at that myself. Feeling like an idiot right now.
(This is a front-end server was NOT checked...had to remove the RUS from the
FE server, and restart the WWW service.)

So it's working great now. If users have mailbox's on the FE server, I
assume that they won't have access via webmail after this is done?

On another note, could you or anybody else comment on the firewall
configuration for the BE servers? From my understanding, the only
connectivity to the outside world that the BE servers need is SMTP outbound
(port 25 outbound?).

Thanks a lot Ed,

Travis

On another note, could you or someone else
"Ed Crowley [MVP]" <org> wrote in message
news:OgSlA7%phx.gbl... 

Event to current user comes back NDR from non-existent user!?

Posted: 12 Sep 2005 01:55 PM PDT

Right, "Tools, options, delegates" nothing there. Exchange General delivery
options: blank

"Ed Crowley [MVP]" wrote:
 

junk e-mail folder

Posted: 12 Sep 2005 11:39 AM PDT

I posted it here because I'm 99% sure its an exchange issue not an Outlook
issue but I will post it in the outlook newsgroup.

thanks

"Ed Crowley [MVP]" <org> wrote in message
news:phx.gbl... 

RPC over HTTP - Exchange 2003? Implementation 411?

Posted: 12 Sep 2005 10:50 AM PDT

On Mon, 12 Sep 2005 12:03:01 -0700, "Scott" <com>
wrote:
 
No. You will need to do it out of hours.
You should do anything like this out of hours anyway, right after
backing up the whole box.

Printing a distribution list from the GAL

Posted: 12 Sep 2005 10:49 AM PDT

If you want to print a list of all members of a distribution list, you'll
still need to either use a script (TechNet Script Center has some you can
use.. ) or "expand the DL in Outlook", add the members to a new Contacts
folder and print.

--
Bharat Suneja
MCSE, MCT
--------------------------------


"Bharat Suneja" <spam.org> wrote in message
news:%phx.gbl... 

Having Problem with RPC over HTTPs

Posted: 12 Sep 2005 08:31 AM PDT

Thanks Kashif:

This Option is however checked. I was able to find a solution to the same.
This was basically a problem with a Non trusted Certificate being used. This
has been resolved and it is connecting it over HTTPS as it should be.

Next probelm what I am facing is the I am not being able to restrict GAL for
the user to its own domain using ROH but able to do so using MAPI. Can
somebody please help me on this.

Regards
MZ

"Kashif Awan" wrote:
 

Offsite Backup Server

Posted: 12 Sep 2005 06:16 AM PDT

Let me add that the cost and complexity, not to mention supportability, of
trying to replicate mailbox content between Exchange servers is daunting.
Most organizations opt for a "dial tone" strategy, where if there's a
failure at one datacenter, they run a script that changes all user accounts
to use mailboxes on the standby servers. Then administrators restore the
content from backup files to the recovery storage group and then use exmerge
merge the old data back in. Actually there are variations to this theme,
very well covered in the Disaster Recovery whitepapers on Microsoft's
Exchange 2003 web site.
--
Ed Crowley
MVP - Exchange
"Protecting the world from PSTs and brick backups!"

"Ed Crowley [MVP]" <org> wrote in message
news:phx.gbl... 

Outlook 2003 and Exchange 2003 in TS mode

Posted: 11 Sep 2005 10:42 PM PDT

Everyone can send my client large emails, but when sending large emails, how
can i set it so that it doesnt reject sending large emails ?


"Kashif Awan" wrote:
 

upgrade question

Posted: 11 Sep 2005 09:25 PM PDT



In news:com,
instauratio <microsoft.com> typed: 

Yep - but not much. You just have to plan carefully as you can't buy
products one at a time - just once a year or every other year, AFAIK. 

I'd say so, yes. Your users will love OWA, and RPC over HTTPs.
 

Nope. Just saying that you can't run E2000 on W2003.
 

It will, yes. But if you have the chance to buy W2003 at the same time, do
it - or look into SBS2003 if this is a small office, and get users on WinXP
and Office 2003 too.
 

outlook taking ages

Posted: 11 Sep 2005 12:21 AM PDT

Slow Outlook startup is usually caused by DNS or WINS name resolution
problems.

Hold the Ctrl key down and click on the Outlook icon in the System Tray,
then select Connection Status... You'll see which of the connections are
taking a long time. Maybe that'll give you some clues.
--
Ed Crowley
MVP - Exchange
"Protecting the world from PSTs and brick backups!"

"David Cleland" <com> wrote in message
news:phx.gbl... 

ESM Global Setting

Posted: 09 Sep 2005 01:36 PM PDT

Yes. I forget. Every Single Time!

block message at server level

Posted: 09 Sep 2005 09:55 AM PDT

See response in your other post.

pop and stmp server address

Posted: 09 Sep 2005 09:17 AM PDT

We're starting to sound like Wham.
--
Ed Crowley
MVP - Exchange
"Protecting the world from PSTs and brick backups!"

"Lanwench [MVP - Exchange]"
<donotsendme.unsolicitedmail.atyahoo.com> wrote in message
news:phx.gbl... 

Error 8230 in the eventlog

Posted: 08 Sep 2005 07:24 AM PDT

I guess you didn't read the forum I supplied in the link. Lots of people are
having the problem. We are getting 3 - 4 messages a day and there is no file
level anti-virus installed.

"William Lefkovics [MVP]" wrote:
 
Subscribe to: Posts (Atom)