Pages

Search

uninstalling exchange server problem - Microsoft Exchange

uninstalling exchange server problem - Microsoft Exchange

uninstalling exchange server problem

Posted: 05 May 2005 08:40 AM PDT

nope i dont use public folders ...

"seth" <com> wrote in message
news:#phx.gbl... 

Exchange Virutal Memory

Posted: 05 May 2005 08:31 AM PDT

Thanks for your help guys.


"Cody" <none> wrote in message news:phx.gbl... 

Moving Exchange 2003 To Another Server When Installed on a Win2k3

Posted: 05 May 2005 06:08 AM PDT

Mark,

Thank you for the reply. The new server can just be a member server,
correct? It does not need to be a DC?

I'm just making sure because I found this kb article that says you can't
promote or demote a server after installing Exchange 2003, but it makes no
mention of moving it to a new server....

http://support.microsoft.com/kb/822179

Also, the instructions that you pointed out to me on swinc are great, but
they specify Exchange 2000, will they work correctly for 2003?

Once again, thank you for your help!!

OWA- Quick Dummy Question

Posted: 04 May 2005 07:11 PM PDT

Got this from another board, it worked great:

http://support.microsoft.com/?id=883380

Back to the redirection-

Internally we use the https:\\<servername>\exchange to access the OWA. We
have SSL & forms based turned on and working. The router is configured to
forward the https:\\mail.FQDN.com to the exchange server. The server see's
the request but doesn't know what to do because the is not a reference to the
'exchange' page. I believe I need either a index page in there somewhere or
a redirection of some kind.

Thanks
--
Pete C.


"Mark Arnold [MVP]" wrote:
 

Cached Mode - Not receiving e-mail.

Posted: 04 May 2005 08:18 AM PDT

Well I really don't care either way BUT my boss does. Cache mode is not
needed on the comuter that is having the problem. On the other hand two of
the other computers using Excamge 2003 are laptops. They belong to my boss
and me. We use these laptops from home and use VPN to access the network.
Cache mode is the best way to access all we need on and off the network. Well
as far as we know it is.

"J.H" wrote:
 

Message size decrease?!

Posted: 04 May 2005 04:56 AM PDT

Guess - you got that message from the Internet. Internet mail uses less
efficient method of attachment transport and storage. This format is used in
Exchange when message first arrives. Later, when message is accessed by MAPI
client (Outlook in Exchange Server mode), it is converted to more efficient
storage format and thus takes less space. Thus decrease in size.

David wrote:
 

Exchange 2003 and greylisting

Posted: 04 May 2005 01:55 AM PDT

Hi Ola,

Have you tried Real-time block list in Exchange server, which I think would meet
your requirements.
823866 How to configure connection filtering to use Realtime Block Lists (RBLs)
http://support.microsoft.com/?id=823866

For the DNS-based spam database, we can refer to:
http://www.declude.com/Articles.asp?ID=97

For other third-party solutions, we could wait for some experience sharing from
the peers ;-)

Regards,

Pat Cai
Microsoft Online Partner Support

Mailbox Rights -- Outlook Delegates????

Posted: 03 May 2005 06:25 AM PDT

One thing to keep in mind, I noticed it when we converted our users to
exchange 2000. When you used to give delegate access in 5.5, users could add
the profile to their services in outlook and open the mailbox and see the
folders they have access to. In E2K, this does not work the same way. If
you give a user Editor access to your inbox, they see your inbox (file open
other users folder) but if they add your profile their outlook, they will not
be able to expand the mailbox anymore. This has changed from E 5.5 to E2K.
Just an observation in our company.
Clients now have to give at least reviewer on the Outlook Today.
THanks.

Message Receipient

Posted: 02 May 2005 05:30 PM PDT

-----BEGIN PGP SIGNED MESSAGE-----
Hash: SHA1

Thanks for the reply..

Could you explain what you mean by Forwarder ? I'm not familiar with
this option.

Thanks,

HS

Mark Arnold [MVP] wrote:
| On Tue, 03 May 2005 00:30:59 GMT, HbooGz <com>
| wrote:
|
|
|>-----BEGIN PGP SIGNED MESSAGE-----
|>Hash: SHA1
|>
|>Good Afternoon:
|>
|>Considering Exchange's tight integration with AD, i figure i post in as
|>many relevant groups.
|>
|>I had two user's within the same OU until i disabled one user. Now the
|>scenario is as follows:
|>
|>Disabled user = User A
|>Other user in same OU ( recipient of meeting request) = User B
|>User sending Meeting Request = User C
|>
|>User C sends a meeting request to User B ; User B receives the request
|>normally, However User C receives a message from System Administrator
|>indicating "the e-mail account (UserA in this example) does not exist at
|>the organization this message was sent to. Check the e-mail address, or
|>contact the recipient directly to find out the correct address.
|>
|>User A was first disabled and through the troubleshooting process the
|>user account and mailbox were purged.
|>
|>User B is running Outlook 2003 but not running in Caching Mode nor does
|>he have anyone set as a delegate.
|>
|>Environment Consists of:
|>
|>Windows 2000 Server;SP 4 = AD
|>Windows 2000 Server;SP4 w/Exchange 2003;SP1
|>
|>Does anyone have any helpful advice on how to resolve this ?
|>
|>Thanks
|
|
| Did you also check to see if there was any forwarder on B, either at
| the server in AD or within Outlook, that sent mail to A?
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.2.1 (MingW32)

iD8DBQFCeBcj9u9mmh2EXgQRAlcBAJ0f8IXY+hIELorrftCmha wcob9SqwCfaCvH
iCjqAgU+lQDiHIBHRLxqM5Y=
=u38C
-----END PGP SIGNATURE-----

IIS SMTP Virtual Server sending to Exchange 2003

Posted: 02 May 2005 09:41 AM PDT

Here is some more information about my problem. I eventually get a Action:
delayed Status: 4.4.7 on the outgoing message. The SMTPSVC log looks like
this:

20:43:36 192.168.1.209 - - 0
20:43:36 192.168.1.209 - - 0
20:43:36 192.168.1.209 EHLO - 0
20:43:36 192.168.1.209 EHLO - 0
20:43:36 192.168.1.209 - - 0
20:43:36 192.168.1.209 MAIL - 0
20:43:36 192.168.1.209 - - 0
20:43:36 192.168.1.209 MAIL - 0
20:43:36 192.168.1.209 - - 0
20:43:36 192.168.1.209 RCPT - 0
20:43:36 192.168.1.209 - - 0
20:43:36 192.168.1.209 RCPT - 0
20:43:36 192.168.1.209 - - 0
20:43:36 192.168.1.209 - - 0
20:43:36 192.168.1.209 BDAT - 0
20:43:36 192.168.1.209 BDAT - 0
20:54:18 192.168.1.209 - - 0
20:54:18 192.168.1.209 - - 0
20:54:18 192.168.1.209 QUIT - 0
20:54:18 192.168.1.209 QUIT - 0

Help!! What does this mean?

Thanks,
Ken K

"Ken Korczynski" wrote:
 

CFO died.

Posted: 01 May 2005 08:08 PM PDT

On Sun, 1 May 2005 22:31:04 -0700, "MichaelHensley"
<postalias> wrote:
 
http://www.microsoft.com/downloads/details.aspx?FamilyID=429163ec-dcdf-47dc-96da-1c12d67327d5&DisplayLang=en

How to clear Outlook 2003 history

Posted: 29 Apr 2005 08:26 AM PDT

Now who is being disengenuous? Many of you MVP's weasel your way into
corporate pockets by directing inquirer's to web sites for help. And of
course these web sites that SELL SOLUTIONS and consulting jobs, don't they?

You write about profit like it's a four letter word! We are very honest
about writing a needed solution for profit. Instead of telling people to
delete oftentimes valuable, irresplacable data, we developed a very helpful
solution. This solution even includes a means by which users can edit x500
addresses, very handy when migrating Exchange servers. But then, you seem
like the type of person who hates Bill Gates and Benjamin Franklin and
perhaps anyone else who developed products that help people.

The many companies and government agencies all over this globe that have
written to say "thanks" to us are testimony that we developed a much needed
solution. We will not "go away", and we will continue to call attention to
"dumb advice" given by people who should know better. For your information,
$24.95 is only for the desktop version that doesn't edit GAL records. You
should see what our executable version can do when called from a login
script!

These comments do not apply to ALL MVP's, just a few. Most MVP's that I
have been in touch with are genuine and work very hard to help people.
Others....well it's not a perfect world.

Randy
"Milly Staples [MVP - Outlook]"
<org> wrote in message
news:phx.gbl... 

LDAP

Posted: 29 Apr 2005 03:56 AM PDT

Hi
The only hitch here is we only want CR to be hidden which are created for
external addresses,is there a way out for this so end user can't see all the
CR..

Urgent help will be appreciated...

Thanks&Regards
Rajnish

"Jim McBee [MVP Exchange]" wrote:
 

link two MS project files Microsoft Project

link two MS project files Microsoft Project

link two MS project files

Posted: 24 Nov 2004 06:51 AM PST

Thank you John and sorry for the confusion. I meant "paste link"
The problem I have is that after the paste link, if I add a new task the
linked file is not updated unless I repeat the paste link steps for every new
entry.

The good thing is that when I delete one task, the linked file is also
updated, and it would be greate if I can do the same thing while I am adding
a new task without repeating the paste link steps. Please advise Thank you
Majid

"John" wrote:
 

PjENAgent.cpp error

Posted: 24 Nov 2004 04:41 AM PST

MS Project Server services are running under LocalSystem.

--
Peter Matuska

"Claudio Hidetoshi" wrote:
 

Resource Usage/Project Name View

Posted: 23 Nov 2004 02:49 PM PST

hi sarah;
isn't there easy way?
becuse i am not familier whit VBA.

regards
moradi

Proj Pro Licensing

Posted: 23 Nov 2004 12:13 PM PST

I certainly hope you are wrong.

The only reason we are using TS is because Proj Server performance is so
poor across a WAN (we have plenty of bandwidth). This tells me that due to a
flaw in the product, not only does my firm need to purchase TS licenses but
also double-up on Proj Pro licenses? Simply unacceptable.

Rod, this frustration is certainly not directed at you. I appreciate your
response.
I just feel that this is a significant barrier to entry for Proj Server in
deploying across an enterprise.

"Rod Gill" wrote:
 

Complete a task before moving to next task.

Posted: 23 Nov 2004 08:31 AM PST

Hi Gordon,

No, no, no, no, sorry.
Leveling does not spread resources. Never.
It ONLY delays tasks when necessaruy.
HTH

--
Jan De Messemaeker
Microsoft Project Most Valuable Professional
http://users.online.be/prom-ade/index.htm
32-495-300 620
"Gordon Blair" <com> schreef in bericht
news:com... 

Effort vs Duration

Posted: 22 Nov 2004 03:11 PM PST

Hi Matt,

Welcome to this Microsoft Project newsgroup :)

You might like to have a look at my series on Microsoft Project in the
TechTrax ezine, particularly #1-TaskTypes, at this site:
http://tinyurl.com/2xbhc or this:
http://pubs.logicalexpressions.com/Pub0009/LPMFrame.asp?CMD=ArticleSearch&AUTH=23
(Perhaps you'd care to rate the article before leaving the site, :)
Thanks.)

FAQs, companion products and other useful Project information can be seen at
this web address: <http://www.mvps.org/project/>

Hope this helps - please let us know how you get on :)

Mike Glen
MS Project MVP



matt wrote: 

Weighting tasks

Posted: 22 Nov 2004 01:43 PM PST

We have found a decent solution for our EV Analysis.

We have found that using "Physical Work Complete" as our Earned Value method
will help tremendously.

Let me know if i confused anyone out there, better yet, let me know who i
didn't confuse;)


"Michael McGinley" <com> wrote in message
news:phx.gbl... 

Resource allocation for multiple users

Posted: 22 Nov 2004 08:02 AM PST

Hi Rich

When I say you can do it all I mean make all the decisions yourself and
enter it into Project.
Needless to look within Project, there is no automatic tool for what you
want.
And unfortunately, I'm a one trick pony, I do not know other softwares.

HTH
--
Jan De Messemaeker
Microsoft Project Most Valuable Professional
http://users.online.be/prom-ade/index.htm
32-495-300 620
"Rich" <com> schreef in bericht
news:google.com... 
news:<phx.gbl>... 
automatically 
change 

Link with Excel and updating fields

Posted: 22 Nov 2004 03:53 AM PST

This may sound like an odd question, but we may have a mutual friend. Are
you in So California and if so do you know a woman named Melinda?

--
Steve House [MVP]
MS Project Trainer/Consultant
Visit http://www.mvps.org/project/faqs.htm for the FAQs

"Panos" <microsoft.com> wrote in message
news:com... 

View Cost - Per Parent Task

Posted: 19 Nov 2004 12:41 PM PST

What are you meaning when you say "parent task?" Are you referring to
summary tasks such as project phases that have activities indented as
subtasks underneath? Or do you mean tasks that have several resources
assigned to them.

If you're interested in the actual work activities for each resource the
task usage view might work for you. It shows the tasks and the resources
assigned to them. Drag the divider between the two halves of the screen to
the right a little to give you more room for the table and add the "cost"
column.

--
Steve House [MVP]
MS Project Trainer/Consultant
Visit http://www.mvps.org/project/faqs.htm for the FAQs

"Dutchy" <microsoft.com> wrote in message
news:com... 

Locking down a plan

Posted: 18 Nov 2004 01:53 PM PST

Brian --

You are welcome, my friend! :)

--
Dale A. Howard [MVP]
Enterprise Project Trainer/Consultant
Denver, Colorado
http://www.msprojectexperts.com
"We wrote the book on Project Server"


"Brian Stebbins" <com> wrote in message
news:phx.gbl... 
in 

Open Office - [discuss] Annoying problem

Open Office - [discuss] Annoying problem

[discuss] Annoying problem

Posted: 08 Mar 2010 08:29 AM PST

Is OpenOffice.org 3.2 compatible with windows 7?

On 9 March 2010 18:59, Mike Scott <org.uk> wrote:
 


--
Marius Popa

[discuss] Annoying problem

Posted: 04 Mar 2010 04:01 PM PST

2010/3/5 Barbara Duprey <com>: 

Not my problem. Besides you can read it without being subscribed:
http://permalink.gmane.org/gmane.comp.openoffice.general/55101

It can easily be found by entering the following (for example) in the
google search field:
OpenOffice.org discuss annoying problem Michael Hutton

---------------------------------------------------------------------
To unsubscribe, e-mail: org
For additional commands, e-mail: org

[discuss] Call for Nominations for Community Council Seats

Posted: 27 Feb 2010 08:31 AM PST

Yeah it is all a bit confusing isn't it? I think it means that you
should delete it from your inbox :-)
cheers
--
Mike Moller
Lallybroch Alpacas
New Zealand
www.lallybroch.co.nz



On Sun, Feb 28, 2010 at 10:14 PM, Stoffer Tienstra <com> wrote: 

---------------------------------------------------------------------
To unsubscribe, e-mail: org
For additional commands, e-mail: org

[discuss] DISCONTINUE

Posted: 21 Feb 2010 06:54 AM PST

c'mon people get over it! on the interweb thingy there are always
going to be rude and insensitive bozos like this one who only think in
upper case and can't be bothered to look for an unsubscribe link. I
really think we could give up responding to posts like this one and
get back to more productive work

Oh yes, to Christine Hanley - may the fleas of a thousand afghan
camels infest your armpits and may the posts from a hundred thousand
professional spammers infest your inbox daily, before breakfast
--
Mike Moller
Lallybroch Alpacas
New Zealand
www.lallybroch.co.nz



On Mon, Feb 22, 2010 at 10:33 AM, Peter Hyde <cc> wrote: 

---------------------------------------------------------------------
To unsubscribe, e-mail: org
For additional commands, e-mail: org

[discuss] User Poll

Posted: 17 Feb 2010 09:27 AM PST

Hi Bernhard,

Bernhard Dippold wrote: 

Yes I am aware of the repositories. I was not aware of the voting
results and will check them out.
 

I am not to sure of download counts. I have downloaded a lot from both
repositories that I only loaded long enough to see what they were.
Others that I still have loaded are not used. What I was trying to do,
to not great avail, was find out what is actually being used.
 

If people actually voted for the extensions they use on a regular basis
that would be better.

Andy


---------------------------------------------------------------------
To unsubscribe, e-mail: org
For additional commands, e-mail: org

[discuss] Program Idea

Posted: 16 Feb 2010 08:06 AM PST

On Wednesday 17 February 2010 05:06, Kevin Jemmott wrote: 

There is a process for Requests For Enhancement (RFEs). They get added as
issues to the bugtracker the same as a bug on the quality assurance website.
http://qa.openoffice.org/

Of course you are welcome to discuss ideas in this forum if you wish to know
if they will be acted on or not. The best way to get your idea to reality,
short of writing the code yourself, is to pay a developer. Most user ides are
unlikely to get included unless they have mass appeal or are useful minor
tweaks.

--
Michael

---------------------------------------------------------------------
To unsubscribe, e-mail: org
For additional commands, e-mail: org

[discuss] Moving lists to 'new' Nabble

Posted: 14 Feb 2010 11:10 AM PST

Dear Paul: 
I've no idea on how nabble works (never used it). Do you currently access
Nabble through NNTP?

A quick search indicates that it may not be possible moving forward (
http://n2.nabble.com/Accessing-via-NNTP-tc2292997.html)

/paul

--

Stephen Leacock<http://www.brainyquote.com/quotes/authors/s/stephen_leacock.html>
- "I detest life-insurance agents: they always argue that I shall some
day
die, which is not so."

[discuss] Proofing tool

Posted: 12 Feb 2010 03:32 AM PST

Hi!
Thank you very much for your help.
Best Regards
Bernard Haezewindt

-----Original Message-----
From: Harold Fuchs [mailto:com]
Sent: 17 February 2010 00:38
To: org
Subject: Re: [discuss] Proofing tool

b.haezewindt wrote: 
part 
when 
somewhere 

Assuming you are using OOo 3.x simply putting a dictionary file into a
directory is *not* sufficient. The dictionary must be implemented as an
*extension* (.oxt file) and installed via the Extension Manager. See
<http://wiki.services.openoffice.org/wiki/Extension_Dictionaries> for a
little more information. To discuss this in more detail send questions
to <openoffice.org>.

--
Harold Fuchs
London, England


---------------------------------------------------------------------
To unsubscribe, e-mail: org
For additional commands, e-mail: org



---------------------------------------------------------------------
To unsubscribe, e-mail: org
For additional commands, e-mail: org

[discuss] OpenOffice is 99% open

Posted: 04 Feb 2010 05:26 AM PST

On Feb 4, 2010, at 8:11 AM, Wm Stewart wrote:
 

The quality of OO's ability to read and write MS file formats isn't a true success, in my mind, because at any moment should OO gain traction Microsoft is capable of making a change and rendering the quality of OO's reading and writing to garbage. So that I can't be sure OO is always going to work. Which really isn't a fair criticism of OO and should be a serious condemnation of MS but that isn't the way the world sees it unfortunately :(

Captain Nice
com

"I love my computer, because my friends live in it!"


---------------------------------------------------------------------
To unsubscribe, e-mail: org
For additional commands, e-mail: org

[discuss] Question/Suggested addition

Posted: 03 Feb 2010 08:08 AM PST

Hi Carl:

Yes, they are different. It looks like you saw my email to Paula.
Long before I saw Oo around, in DOS, I was a user of generic CADD 5 and 6.

In its time it came on 6 1.44 Mb. Floppies.

By the time I left it, I was filling a 100 Mb. Zip disk with the results of
my work.

I used it in connection with an industrial electronics service business I
had at the time. On one occasion I was able to semi-automatically duplicate
a schematic while renumbering all the component numbers in the process to
end up with a schematic of a dual architecture machine schematic for
packaging frozen vegetables.

I think this would also be feasible in Oo Draw, but visually, the operation
would look very different from my old DOS counterpart.

If one was doing this from a text script of the vectors, they could do a lot
of selective auto-creation by dumping the vector text into a spreadsheet and
doing transformations, then re-dumping the contents back (through a DOS text
file to get rid of the spreadsheet formatting stuff), then back to the CAD
import.

In the case of Draw, the spreadsheet would be of some help, but you would
need to use it as a step by step guide while the actual work was done by
copying the block as a group, then ungrouping and doing a find/replace on
the drawing elements. This would need to be done in an extra page as a means
of preventing the find/replace from tampering with the half that was not to
be modified. Then group the changed objects, copy, paste and position in the
original page, ungroup both halves (optional), then regroup the whole thing
and size and center as a big group.

BTW, Draw can also support hierarchal groups within groups, as well (I
think) as parallel groups (This would depend on how Draw reads its grouping
codes.) This could also be tested ad hoc. That is the kind of tinkering I
always have an extra directory/folder called "experiments" for!

Over the years, I have done a lot of reinventing the wheel because I was not
satisfied with the wheels I found - definitely an out of the box thinker!

I have also worked since with AutoCAD and seen a number of other Cad
programs. Presently I prefer to use Oo Draw for that stuff as long as it can
be 2D (but actually, having come from the drafting board days originally, I
think one could nicely do double auxiliary projections in Oo Draw if they
really wanted to represent 3D to scale in there, but I wonder how many today
would know how to read them any more.)

It is very possible to control object sizes numerically in Draw. It's just
that the way it is done is somewhat different from a true Cad program.

Recently I saw an article from someone in an American University that was
using Draw somewhat this way, but I must admit that I though I felt more
comfortable with Draw than the article suggested he might have.

Cheers,

Bruce M.
================================================== ==========================


-----Original Message-----
From: Carl Shewmaker [mailto:net]
Sent: February 4, 2010 8:36 PM
To: org
Subject: Re: [discuss] Question/Suggested addition

I've used swriter for years, and never use the default page border format
except for quick notes to myself and as a scratch pad to copy from and paste
to another document or application.* For things that others will see, I have
created blank templates for the various documents I produce, eg. letters,
documents, pleadings and envelopes, that I can open with as few keystrokes
as the default page.* I can customize them any way I find useful, and it is
not hard to do.* Bet students could easily do this, and enjoy taking control
of their lives.* My templates generally have a "first page" with a header,
and a "default" second page with a footer containing a page number.

Haven't thought about text boxes, Is it something different from "frames?"*

good luck,

Carl

--- On Wed, 2/3/10, Paula Cline <com> wrote:

From: Paula Cline <com>
Subject: [discuss] Question/Suggested addition
To: org
Date: Wednesday, February 3, 2010, 10:08 AM

Dear OpenOffice,

This question is in regards to text boxes in OpenOffice Writer. I was
looking for a way to insert a text box, without going to the Drawing
toolbar. The drawing toolbar is not visible on our student's computer in the
library lab. Therefore, they search for it under "Insert", which would be a
logical place to find this option. However, I do not see it listed there.
Possible feature to be added in the future?

Also, most documents assigned at the high school level (and possibly
college) require 1" margins. Why are the defaults all set at .79? Another
possible future change?

Looking forward to any new editions!

Sincerely yours,


Paula Cline
Library Media Specialist
Genoa Area High School
2980 N. Genoa-Clay Center Rd.
Genoa, Ohio 43430
email: com
phone: 419-855-7735 ext.13
fax: 419-855-7739



---------------------------------------------------------------------
To unsubscribe, e-mail: org
For additional commands, e-mail: org


No virus found in this incoming message.
Checked by AVG - www.avg.com
Version: 9.0.733 / Virus Database: 271.1.1/2668 - Release Date: 02/04/10
14:35:00



---------------------------------------------------------------------
To unsubscribe, e-mail: org
For additional commands, e-mail: org

[discuss] OO Writer

Posted: 02 Feb 2010 09:43 AM PST

On 2 Feb 2010 at 12:43, kwalsh2004 wrote:
 

You need not fear anything from 'registering' your copy of
OpenOffice.org. It is only used to get some idea of how many people
use OpenOffice.org. Because OpenOffice.org is given away free, we
don't have any sales figures to use.

One thing you probably have not realised yet is that there is an
amazing community of people associated with OpenOffice.org, who
develop it, promote it and, most important for you, are willing to help
others to get the best out of OpenOffice.org. Go to

www.openoffice.org

to find out more about this.

Tony Pursell
One of the community of users who support OpenOffice.org.

PS to my OpenOffice.org colleagues:

Mr Walsh is not subscribed to this mailing list, so he may not see you
replies to him.




---------------------------------------------------------------------
To unsubscribe, e-mail: org
For additional commands, e-mail: org

[discuss] Why

Posted: 31 Jan 2010 10:57 AM PST

2010/2/1 Peter Szokoll <com>: 

Peter,

You seem to be subscribed to this list: org
So you may expect to receive all messages sent to this discuss list.

If you didn't intend to be a subscriber:
To unsubscribe, e-mail: org
For additional commands, e-mail: org
--
Guy
using dutch OOo 3.2 on a iMac Intel DualCore Snow Leopard
and brazilian OOo 3.2 on an Intel MacBook Pro Leopard
-- please reply only to org --
Dodoes can't afford to have headaches

---------------------------------------------------------------------
To unsubscribe, e-mail: org
For additional commands, e-mail: org

[discuss] What to do?

Posted: 31 Jan 2010 10:01 AM PST

On Sun, Jan 31, 2010 18:01:16 PM +0000, Harold Fuchs (com) wrote:
 

And every time you, and others doing the same before you, were given
tons of patiently explained reasons why it was and will always be a
<words-really-fail-here> idea. Besides, about 20 days ago I and
Barbara D., after an initial misunderstanding, had agreed here on this
list that Barbara's attitude and strategy seemed very promising
(and/because it did NOT include bothering subscribers to death with
<words-really-fail-here> "forwarding to unsubscribed user" messages).

Now, Harold, I do NOT want to repeat again in full detail why this:
 

is a really <words-really-fail-here> idea, but you raised what is (for
me at least) a NEW issue and I would sincerely appreciate an
explanation, so here's a question and PLEASE let's stick to it. You
wrote:
 

I admit I had missed this before and it really puzzles me. May I ask
when/where/how you were told that you can't do that, and by whom?

Marco
--
Enough with this "Free Software is communist" myth! Please!
http://stop.zona-m.net/it/node/87


---------------------------------------------------------------------
To unsubscribe, e-mail: org
For additional commands, e-mail: org

Microsoft CRM - SFO Client crmaddin.dll

Microsoft CRM - SFO Client crmaddin.dll

SFO Client crmaddin.dll

Posted: 16 Jun 2004 06:17 PM PDT

You are right Jake, it took me about 4-5 minutes. That is
a long time, I don't have lot of data in my system.

Why does this happen suddenly to the client, the dll gets
disabled on its own. I had the outlook client working
yesterday and today I couldn't get to it. Is anyone else
having similar problems with SFO ?
 
run... I have seen 
message 
it 
crmaddin.dll 
I 

Stored Procedure

Posted: 16 Jun 2004 05:59 AM PDT


"Edwin Garst" <epconsystems.com> wrote in message
news:phx.gbl... 

Thanks very much for trying anyway Edwin. Could you tell me which database
it is stored against or do you have it as a file only? I just wonder whether
its specifically setup for training or not.

Tony

email server

Posted: 16 Jun 2004 04:53 AM PDT


"Peter L" <co.uk> wrote in message
news:phx.gbl... 

I wonder is it not possible to configure Exchange to route messages through
as a gateway, and kind of configure Mac Email as the receiving end
nevertheless - such that emails are not sent or received directly through
the Mac but via Exchange gateway? Most of the work must be done on the
Exchange server for it to work with the GUIDs etc and you cant get away from
installing the CRM for Exchange Router component, on Exchange funnily
enough. They must route through Exchange.
Just a thought.
Seems a bit ambituous in expecting Mac and Windows to interoperate :o)

Mofidied On has the same date/time in many items

Posted: 16 Jun 2004 03:46 AM PDT

This will also happen if you perform a security role update as all records
have to be accessed to check security. This is by design although I have
logged it as a possible design flaw.


"Mj Miller" <com> wrote in message
news:phx.gbl... 
of 
someone 

outlook and crm url

Posted: 16 Jun 2004 02:12 AM PDT

the problem it's that i've not the permission for working with the crm
server, i've changed user and password and all work correctly.
Thanks a lot
--
No one is to blame

Inviato da www.mynewsgate.net

basic question about offline mode

Posted: 16 Jun 2004 01:57 AM PDT

Only the data you are supposed to see is transferred down to your machines
local database. The Outlook client always takes a long time on the first
sync as it is doing a lot of work. Subsequent syncs are much much quicker


"SiEBEN Innovative Solutions" <gr> wrote in message
news:u6fxd%phx.gbl... 

Form Customization not showing

Posted: 15 Jun 2004 09:08 PM PDT

Thanks for the help. I thought I had published it, but
obviously not. That worked, I appreciate it.

 
be 
field, 

CRM Performance

Posted: 15 Jun 2004 02:26 PM PDT

are you seeing any pattern in usage when the system slows down. For instance
if nobody is running reports is performance ok?

can you tell me your database sizes just for my interest.


"kmd" <microsoft.com> wrote in message
news:1cc2b01c45349$a44882b0$gbl... 

PROBLEM WITH MANAGEMENT CONSOLE AND INSTALLATION

Posted: 15 Jun 2004 12:05 PM PDT

Dave, thank you very much, the problem was that I logged
into the domain with an invalid user.

Have a nice day
 
installtion, be sure you 
the CRM. 
there are 3 
id=28828&target=PS 
message 
when 

Test Environment

Posted: 15 Jun 2004 08:56 AM PDT

I use same spec as Gary's box with SBS 2003 - again works perfect for demo /
development work.

Regards

Pete

"Gary" <NOSPAM.com> wrote in message
news:phx.gbl... 
like 
test 

DATE IMPORT

Posted: 15 Jun 2004 05:24 AM PDT

I am importing from a .txt file.
Lee

"Gill Walker" <microsoft.com> wrote in message news:<1cedf01c4533c$aea9e710$gbl>... 

how to turn off e-mail header tracking # in CRM 1.2

Posted: 14 Jun 2004 02:24 PM PDT

Here is the article.
I don't know exactly what kind of tracking are we loosing
here. Please post it if you find out.

Document ID: 34747
Date Created: 1/31/2004
Date Last Modified: 5/13/2004
Language: English - United States
Country: USA
Product: Microsoft CRM
Versions: 1.2
Modules: Microsoft CRM Documentation, Microsoft CRM Email
Router

SUMMARY

A unique tracking number appears on the subject line of e-
mail messages composed in the Microsoft CRM system. This
article describes the steps you must take to turn off the
e-mail GUID after upgrading to Microsoft CRM 1.2.

MORE INFORMATION

In version 1.0, there is a hot fix available that adds a
MessageTagBehavior value in the registry on the Exchange
Server where the Microsoft CRM Exchange E-mail Router is
installed. The hot fix allows a Microsoft CRM
Administrator to turn on or turn off the GUID in outgoing
e-mail messages. After you upgrade to Microsoft CRM 1.2,
use the registry to determine if any updates are
necessary to turn off the e-mail GUID.

Important This article contains information about
modifying the registry. Before you modify the registry,
make sure to back up the registry and make sure that you
understand how to restore the registry if a problem
occurs. For additional information about how to back up,
restore, and edit the registry, click the following link
to view the article in the Microsoft Knowledge Base:

http://support.microsoft.com/default.aspx?scid=kb;EN-
US;256986

To check the registry value on the Exchange Server:

1. Click Start, click Run.

2. Type regedt32 in the Open: box.

3. Navigate to
HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\MSCRM.

4. You should find a registry key with a ValueName:
MessageTagBehavior

5. If this key does not exist, create the key using the
following values:

Value Type: DWORD key value
Value Name: MessageTagBehavior
Value data: 0

6. If the Value data is set to Null or 1, the tracking
number will be attached to the subject line of the e-mail
messages. If the Value data is 0, the tracking number is
not attached to outgoing e-mails.

7. Stop and restart the Microsoft CRM Exchange Queue
Service for the new setting to take effect.

If the e-mail tracking is turned off (value data is set
to 0), the Microsoft CRM system will no longer generate
the unique tracking number. In addition, this results in
the loss of the Microsoft CRM system's ability to
automatically track incoming e-mail.
 
have to manually 
with the first 
? 
track 
header 
encountered 

Microsoft Word - Help, I cannot create new folder in ms office 2013 now

Microsoft Word - Help, I cannot create new folder in ms office 2013 now

Help, I cannot create new folder in ms office 2013 now

Posted: 21 Sep 2013 02:59 PM PDT

If I right click, the new folder option is not on the menu. The "new folder" button is at the top of any opened window but nothing happens when I click on it. Help?

error message > C\Program Files\Microsoft Office\Office12\wwLIB.DLL is either not designed to run on Windows or it contain an error etc...

Posted: 21 Sep 2013 01:31 PM PDT

Hello and Namaste !


I have a HCL make ME M74 laptop with 32 bit windows7 ultimate, bought in preloaded state.
For last few days the icons of all micrsoft-office files (that is MS office 2007) have changed  to identical squar box with six squar spots inside. And Since then I am not in a position to open any of the Microsoft-office-word documents. Everytime I try to open, I get an error message as below

"C\Program Files\Microsoft Office\Office12\wwLIB.DLL is either not
designed to run on Windows or it contain an error. Try installing the
program again using the original installation media or contact your
system administrator or the software vendor for support".

Can any one help please ? ... I dont have CD for microsoft OS or MS office etc as those came in preloaded state...Also I am not an expert in all these computer matters. so please explain me little easy way if you want to say something.

Very best wishes

Microsoft office stopped working

Posted: 21 Sep 2013 12:20 PM PDT

I continue to have the MS Office stopped working error when I try to open older versions of MS word.  I currently have 2013.  Working in safe mode still does not seem to fix the issue.  I looked on all the previous solutions and nothing seems to work.  Below; you will find the application error msg.   Is there anyone that can assist?

 

Faulting application name: WINWORD.EXE, version: 15.0.4420.1017, time stamp: 0x5067349a

Faulting module name: wwlib.dll, version: 15.0.4420.1017, time stamp: 0x506734a9

Exception code: 0xc0000005

Fault offset: 0x00ff7c98

Faulting process id: 0x1a54

Faulting application start time: 0x01ceb6f6c1c5c4ea

Faulting application path: C:\Program Files (x86)\Microsoft Office\Office15\WINWORD.EXE

Faulting module path: C:\Program Files (x86)\Microsoft Office\Office15\wwlib.dll

Report Id: 937a8a86-22ea-11e3-bea8-e4d53ddce420

Faulting package full name:

Faulting package-relative application ID:

How can I mix 2-column formatting with footnotes within a document that also contains two single columns?

Posted: 21 Sep 2013 11:56 AM PDT

Word 2010 is unexpectedly inserting a page break and upsetting my desired layout when I add footnotes.  I have a two page Word 2010 document that is laid out as follows:
  • It has a single column header.
  • Below the header it has a two-column layout.  Text within these two columns contains footnotes that appear at the bottom of each page.
  • The second page needs another single-column section below the two column area.
Below the two columns, I have a photograph that stretches the entire width of the second page.  I would like this document to be exactly two pages in length.  I've been able to get it to two pages with the photo with the condition that I do not apply any footnotes to the second page.  This is unacceptable, as I need to provide the footnotes to text on the second page.

For formatting, I'm using Continuous Section Break elements, as prescribed in other posts.  To replicate this same behavior with one page, follow these steps.

Step 1:  Open Word 2010 and type the text below.
Top

Column 1

Column 2

Bottom


Step 2:  Highlight all the text via Ctrl+A and select "No Spacing" on the Home tab.  Also, while in the Home tab turn on the Paragraph button so you can see the formatting indicators in the document.

Step 3:  Now highlight just "Column 1" and "Column 2".

Step 4:  Select Page Layout > Columns > Two.


Now you will see the desired layout, where all four sections appear on the same page.  After "Top" you should see "Section Break (Continuous)" and after "Column 2" you will also see "Section Break (Continuous)".  So far so good.


Step 5:  Place your cursor beside Column 1. Then select References > Insert Footnote.


You now have a two page document.  Scroll down and you will see "Bottom" at the top of the second page.  I did not expect this text to move to a second page.  First, it wastes a huge block of space on Page 1.  Second, I never inserted a "Section Break (Next Page)".


Be that as it may, how can I work around this problem? Can I insert a table with invisible borders? Or do I just need to break out Notepad and write some HTML to achieve the desired result?  Thanks for your help.

Problem opening documents.

Posted: 21 Sep 2013 11:29 AM PDT

Purchased new computer about 8 mos. ago. It had Office 2010 Starter Edition on it--thought we were good to go. Now all the documents turned orange and we can't open them. We are being prompted to buy Office 2010 Pro for $99 per year. We already have a disc with Windows Office XP Pro complete with key. We were told at the store that since we had already bought this, we didn't need to buy it again. We could install it on the new computer. But I didn't uninstall the 2010 one, so all the documents are in that, and I don't know how to get them into the old program now, or if that is possible. We can "try" the new program free for a month, and then they will open, but I don't know if we can then reformat them into the XP program, or if both will work on the computer at the same time. If I can't get this question answered here, I will do one of two things: Call my computer whiz brother or take it back to the store and let one of their guys figure it out. Any suggestions? Don't like being held hostage like this!

spacing

Posted: 21 Sep 2013 11:24 AM PDT

tried to adjust the spacing (followed instructions)in micro office word 2007 but will not let me do it anyone any ideas what im doing wrong

How do I cancel printing in word 2013? Read the responses on Word 2010 but didn't work. Any help appreciated.

Posted: 21 Sep 2013 11:11 AM PDT

Have changed the "background" setting, double clicked on everything I saw.  Recently started printing instruction manual, realized was not what I wanted.  Could find nothing to allow me to "cancel" the print.  Where is it?

Changing file associations for Office 2013

Posted: 21 Sep 2013 10:37 AM PDT

I recently installed a Click-to-run version of Office 2013 Pro on W7, which works well most of the time. I also have Office 2003 installed, and a recent (not the latest) update seems to have fouled up my file associations. This is what my Word associations look like now, for example:



It's not just the associations: the icons and filetypes don't look right, either. There's no executable for the Office 15 programs, so I can't use the Change program... function.

How can I correct these to ensure that the Open command will invoke the Office 2013 version of the program for all Office files?

I want to be able to use Office 2003 programs since I find it easier to collaborate with others using pre-2007 versions.

I can't open my files

Posted: 21 Sep 2013 10:09 AM PDT

When I try to open a Word document I get a message that says I have to activate my Office software. It says I need to insert my product key again (this software has been on my computer for 3 years). When I re-insert the product key, it says the key is invalid. Any help would be awesome!!!

Follow number on Heading1 of a list style with a newline character (Word)

Posted: 21 Sep 2013 09:55 AM PDT

Hello,

I am using list styles in a doc. I selected just the number to show it up in a larger font than the text following the number. However, I would like to include a newline character after the number so that the text is in the next line. I came across the option of "Follow with" in the list style but it doesnot have a newline option. Any ideas on how this can be done? BTW, I still need that text to be part of the Heading1 style so that it gets included in the TOC with the number in a different style as per TOC1. The TOC is meeting my expectations so far, though.

Thanks
Shree

creating template

Posted: 21 Sep 2013 09:03 AM PDT

When building a template the boxes installed will not show when printed. I need this individual boxes and lines to be visable.

Can not start MS Query from Word 2007 Mail Merge

Posted: 21 Sep 2013 08:05 AM PDT

I'm trying to start Microsoft Query from the Select Data Sources dialog in Word 2007 (Select Data Source -> Tools Button ->MS Query) and nothing happens.  I've tried this on three separate machines each running Office 2007 and Windows 7 64 Bit with the same result.  Is this option no longer available?

Office Starter 2010 changed format of stored files both on hard drive and USB drives

Posted: 21 Sep 2013 06:26 AM PDT

I have office starter 2010 pre installed on my Gateway Computer which I have used for almost a year.  Recently, the system changed all my stored files to files which can't be opened in the normal manner. Files can be opened by

Microsoft Application Visulation DDE Launcher.

How can I go back to the way they were previously stored?

Arabic transpasrent fonts ?

Posted: 21 Sep 2013 05:41 AM PDT

I have Windows 8 64 Bits and Office Pro 2013

There isn't  Arabic transpasrent fonts in the system or the office, and I need to use this fonts, I downloaded it and I installed it, but the text in Office Word 2013 crashed, and some Arabic web pages doesn't appear letters it appears symbols !!

Office Click-to-Run 2010 doesn't work

Posted: 21 Sep 2013 03:51 AM PDT

I have Office Starter 2010 pre-installed on my computer and some time ago it stopped working. When I try to open either Word or Excel the usual dialog box pops up that says something along the lines of starting Microsoft Office Click-to-Run (it's not in English but that's the general meaning) and it just stays like that forever. That box stays open until I close it manually by terminating cvh.exe on task manager.
I tried uninstalling Office Starter by the instructions given here:
http://h10025.www1.hp.com/ewfrf/wc/document?cc=uk&lc=en&dlc=en&docname=c02981221#N301
but it had no effect, the same problem still remains. It seems to me that the problem is with Microsoft Office Click-to-Run, not the Office Starter. Is there any way to reinstall or fix it?

Spacing within a text box

Posted: 20 Sep 2013 06:50 PM PDT

 

My problem: spacing within a text box.

 

I am trying to put a textbox underneath my table. In ALL other tables it works fine… the spacing is correct (i.e. figure 1) and it looks good. But in ONE particular case (fig 2), the spacing is wrong. I have tried many different ways to fix this. I have copied the box, and pasted under the new table. I have restarted from scratch and have created a new textbox under the  new table. The formatting in both is Apparently identical. I have checked the spacing, line before and after etc… every item is exactly the same.. is there something else that I can do? I don't understand why… whats interesting is … if I make the textbox under the first table.. it looks correct.. then drag or paste under the new table, it looks incorrect, but then if I drag or paste it back under the original table it goes back to looking correct. I have looked at the spacing on the pages.. they are the same.

 

(So it looks like my figures did not upload... I have pics of what is happening that I would like to share)... but Im not sure how to put them up.

 

Thanks for any help.

I uninstalled Microsoft Word 2010, how do I get it restored?

Posted: 20 Sep 2013 09:32 AM PDT

I uninstalled Microsoft Word 2010, how do I get it back?

Microsoft Word 2010 documents turned into Microsoft Office files that I can't open?

Posted: 20 Sep 2013 08:35 AM PDT

All of my Word documents have somehow changed to Microsoft Office files that I can't open. When I try to open my documents, the Microsoft Office window pops up, saying "The Microsoft Office product necessary to open this file is not installed on your computer" and doesn't allow me to open them. When I try to open/save important documents onto my computer from the internet, I also get the same Windows Office popup. The little blue paper with the "W" has changed to an orange sheet of paper, and instead of saying "Rich Text Format" under the file type, they all say "DOCX File."

I would really appreciate help to solve this problem as soon as possible, as all of these documents are very important for school. Thank you so much in advance. 
Subscribe to: Posts (Atom)