Pages

Search

how to connect two machines directly via ethernet - Forums Linux

how to connect two machines directly via ethernet - Forums Linux

how to connect two machines directly via ethernet

Posted: 24 Jun 2004 05:06 AM PDT

uni-hannover.de writes:

]Hi,

]I would like to know how to connect two machines directly via ethernet
](nothing in between).

You need a null ethernet cable-- This has as I recall pins 1-3 and 2-6
exchanged. (Ie 1 and 3 interchanged...)


]A step by step answer or a suggestion of a document
]with a step by step guide would be appreciated.
]That is:
]1) how to check that the hardware is ok?

Use it.

]2) how to check that the cable is ok? (null cable required ?)
Use a continuity tester to make sure that the wiring goes through to the
right place.
]3) how to setup the domain / ip number ?

domain names are whatever you want and host names (just make the host names
different). ip number use 10.0.0.1 and 10.0.0.2 as
static IP. Put the numbers and names into /etc/hosts on each machine.


]4) What about route and ping ?

What about them?
]The machines are not connected to the internet.
]The goal would be to ssh and scp between the two machines :-)))

]I would like to use no ready-made tools, rather
]edit configuration files and "call" the appropriate
]system service or daemons.

]Luciano

Cannot mount via NFS

Posted: 24 Jun 2004 01:37 AM PDT

In comp.os.linux.networking Jeff Krimmel <com> wrote: 

Before running showmount/rpcinfo on the client host, start "tcpdump -n udp"
on both client and server. If you won't see inbound RPC (111/udp) packets
on server, then check iptables/ipchains (both with "-L -n" options) on
both sides to check whether there is something relevant in there.

--
andrei

Read-only filesystem

Posted: 23 Jun 2004 11:46 PM PDT

"Juerg Schwarz" <ch> writes:
 

Bad idea.
 

This is most likely NOT your /etc/fstab file that should contain
the entries for your filesystems. If you bootup the system in
"rescue" mode, then you start the system from CDROM; therefor, /etc
is located on the filesystem booted / copied from the CDROM and
doesn't point to your valid /etc/fstab file. Mount the filesystem
manually to /mnt, then proceed to checking your filesystems
(use "df" to see what is actually mounted).
 
 
 

Your root filesystem may be damaged; either use a current working backup
to restore your filesystem, or prepare for a reinstallation. Without
any details at hand about your hardware, it's a bit hard to tell what to do
next; typically, you'd first check for any kind of HW failure using "smartctl"
or similar tools, depending from your local setup.

Michael

redhat to mandrake questions

Posted: 23 Jun 2004 09:06 PM PDT

On Thu, 24 Jun 2004 04:06:13 GMT, faeychild wrote: 

That is a security feature to keep you from running as root. People
find it too much trouble to logout out of root and log in as a user.

In your user account
You click Configure-> configure my computer
It asks for your root password and you have the same functionality
as the gui root login.

If you need a root terminal, click up a terminal session an do a
su -l root


Please bookmark the following, very large,
Frequently Asked Questions (faq) Search engine:

http://groups.google.com/advanced_group_search
key word(s) in the first box
*linux* in Newsgroup, U need 2 use *, pick English

If you realy want the root selection use the keywords
gui root login
with *mandrake in the newsgroup box

Amanda for backups

Posted: 23 Jun 2004 08:08 AM PDT

Jander wrote: 

We are using Amanda to do backups on several systems and
I would say that Amanda is very simple to use (at least
as long as your daily backup will fit on one tape) and
implement. The documentation is fairly good although
some parts are a bit old. The forum is very helpful.

One of the backup groups include some windows machines
and Amanda works well with Samba, at least the more
resent versions. I have used Amanda to do backups on
a system with over 3 TB of data on 3 RAID:s with over
60 users using a tape robot without any problems.

/Per

[ANN] Office 11.3.8 update Microsoft Office for Mac

[ANN] Office 11.3.8 update Microsoft Office for Mac

[ANN] Office 11.3.8 update

Posted: 09 Oct 2007 11:18 AM PDT

aRKay <net> wrote:
 

Which is why, if you read what I wrote, I referred to "the Readme", not
"a website"...

The readme file says:

Updated Files:
File Version
Microsoft Component Plugin 11.3.8
Microsoft Word 11.3.8

*Every* Office update will apply to the entire list of Office packages
you cite because of the Component plugin, but *most* updates don't apply
to every application.

If you have a standalone Excel 2004 package, the Component Plugin will
be updated, but not, obviously, Word. Updaters use the Component Plugin
version to determine which updates have been applied, rather than
cycling through each of the hundreds of files in each of the multiple
possible package configurations.

Microsoft Office 2004 11.3.8 ??

Posted: 09 Oct 2007 11:08 AM PDT

The "unofficial" answer is:

1) Microsoft issues updates in "batches" by IP address to avoid swamping
their download servers

2) Apple would gleefully push out a Microsoft update to "everyone" and take
a wicked delight in bogging Microsoft's servers :-)

Cheers


On 10/10/07 9:49 AM, in article
dallas.sbcglobal.net, "aRKay"
<net> wrote:
 

--
Don't wait for your answer, click here: http://www.word.mvps.org/

Please reply in the group. Please do NOT email me unless I ask you to.

John McGhie, Consultant Technical Writer
McGhie Information Engineering Pty Ltd
http://jgmcghie.fastmail.com.au/
Nhulunbuy, Northern Territory, Australia
+61 4 1209 1410, mailto:name

upgrade from mac office to pc?

Posted: 09 Oct 2007 06:43 AM PDT

Thanks. That's what I assumed, but I would have felt foolish if I
hadn't asked and was wrong.

Appreciate it.

On Oct 9, 12:26 pm, JE McGimpsey <org> wrote: 

Custom Dictionarys

Posted: 08 Oct 2007 07:51 PM PDT

How many custom dictionaries do you have?

Word can use at least four, but the other applications can see only the
first one in the list.

Which language is the custom dictionary? It should be set to "No Language"
otherwise the custom dictionary will be used only for text marked with its
specific language.

"English" is not close enough ‹ there are 29 flavours of English. If you
use English UK, English US will be ignored.

Cheers
 

--
Don't wait for your answer, click here: http://www.word.mvps.org/

Please reply in the group. Please do NOT email me unless I ask you to.

John McGhie, Consultant Technical Writer
McGhie Information Engineering Pty Ltd
http://jgmcghie.fastmail.com.au/
Nhulunbuy, Northern Territory, Australia
+61 4 1209 1410, mailto:name

CD Doesn't show up in Finder

Posted: 08 Oct 2007 08:48 AM PDT

Be sure the drive is working. Try another disk in it to see if it will
mount.

I know when I get DVDs from Netflix some will not mount in one of my drives
but will in the other.

--
Diane


On 10/10/07 9:03 AM, in article
googlegroups.com, "com"
<com> wrote:

I'll give this a shot. The PC doesn't see any files on it either
though, (but I don't know if this is common any more or not), though
it is able to mount it (unlike the mac), it just shows up as an
untitled empty volume.

I've never before received a defective disc in an off the shelf
product, I didn't even think of the disc at first; I've been working
on it off and on for most of a week =)

On Oct 8, 5:16 pm, Michel Bintener <org> wrote: 



--
Diane, Microsoft Mac MVP (MVPs are not Microsoft Employees)
Entourage Help Page <http://www.entourage.mvps.org/>
Entourage Help Blog <http://blog.entourage.mvps.org/>

Proofing tools office 2004 and upcoming office 2008 for mac

Posted: 08 Oct 2007 08:04 AM PDT

On 9 Okt., 18:08, Michel Bintener <org> wrote: 

Thank you!

Have a great day!

Daniel

the program "access"

Posted: 06 Oct 2007 06:26 PM PDT

You can copy the .mdb to your Mac and buy the ODBC driver for Mac here :

http://www.actualtechnologies.com/

- -
Marc Vos

On 07-10-2007 03:26, in article
googlegroups.com,
"com" <com> wrote:
 

Microsoft Word - Is there a way to mass delete styles?

Microsoft Word - Is there a way to mass delete styles?

Is there a way to mass delete styles?

Posted: 13 Apr 2013 09:08 AM PDT

I have a document that was created by a product called AABBYY Fine Reader.  It is an optical character recognition program that enables a user to scan pages and then convert them to an existing  document format like Word, or Excel or Adobe PDF.  Unfortunately when the product is used to product a formatted document it often generates a myriad of styles because of minute differences in the text as it sees it.  This can result in a document with literally hundreds of different styles, styles that are useless.

 

I would like to remove all these useless sytles from the document and whatever template it is apparently using, but the only way I know how to do this at this time is one by one, going to the styles list, right clicking the style, and choosing Delete, which then asks you to confirm each one.  With hundred of styles this would be a very time consuming task.  I want to find a way to mass delete the styles so I can start over with a very simple set based on the standard normal template.

 

I can clear all formatting right now, but that does not get rid of the embedded styles and it may also have a negative effect on what formatting I was trying to save.

 

Is there a way to delete all sytles or selected styles using a character pattern filter?

 

Is there a way to get around this by linking the document to a new template?

 

What other solutions have I not thought of?

 

Anxiously waiting for an answer.

can not create a new folder in word 2010

Posted: 13 Apr 2013 06:50 AM PDT

Hello ,

 I do not know why I can no longer create a new folder in word 2010.

 I have windows operating system 7

 worked previously but noe does not?

 

I can save dox. just fine . just unable to create a new folder in which to put them into?

 

thank you in advance fr your help!

 

Steve

compile error in hidden module: include. How can I remove this error?

Posted: 13 Apr 2013 02:33 AM PDT

Whenever I start  Excel or Word,  I get the error: "compile error in hidden module: include". I haven't been able to find anything useful on the internet, can you help me?

Indentation not working properly in Word 2010

Posted: 12 Apr 2013 02:43 PM PDT

My frustration with Microsoft Company has boiled over to this writing regarding Microsoft Word and I know that Microsoft could care less.  Otherwise they would have changed things so that it is simpler to use instead of harder.  Okay.  Now that I am calmed down a little... here is my question:

 

Why is it when I have my cursor on the line I want to indent (I know that I am not stupid) , all of the other text moves on the page except for the line that I have my cursor on???????????  This is so freaking frustrating I cannot even begin to tell you.  I have fought... and I have fought over the years with this same exact problem and I am simply tired of it.

 

The ONLY credit MS gets is that this is text copied from a blog and not an original "New" document.  However, I still have the same problems when trying to indent.  Sometimes the indentations are different, but sometimes not. 

 

HOWEVER,

 

I did select "Merge Formatting" as my choice for the text being pasted.  Sooo.... wouldn't that take care of the problem?

 

Thanks community... you keep me from doing something I would rather regret...lol

 

-fryer

Microsoft word 2010 crashes

Posted: 12 Apr 2013 11:32 AM PDT

on protected document, when enable editing is activated, the word crashes

My spelling and grammar still doesn't work even after trying the methods provided.

Posted: 11 Apr 2013 11:32 PM PDT

I tried the methods provided, but the spelling and grammar still doesnt work. Is there a way to reset the settings I made into Microsoft Word?

Word 2007/Win8: Images are cut off when printing by scaling

Posted: 09 Apr 2013 05:26 PM PDT

Hi.

 

I am having a problem with MS Word 2007 on Windows 8 x64.  I just tested Word 2007 on my Windows 7 x64 computer and it does not have this problem.  In Word documents I manipulate images and screenshots as guides to print for people.  On Windows 7 this was never a problem and was flawless; I could paste screenshots in directly and crop/upscale/downscale images and they STAYED that way.  I also tested the trial version of Office 2010 in desperation but it did the exact same quirk on Windows 8.

 

In Windows 8 I am finding that the page I see on the screen is NOT the same as the printouts (tested on 3 different printers) or the MS XPS file print.  It does look exactly right when printed to PDF via CutePDF.  However, having to print my documents to PDF and then print the PDF is very annoying.  The problem is the scaling for pictures does not stay when the file is printed.  Images become skewed or cutoff as the image stays the same dimensions I dragged it to on the page but it zooms itself to full 100% size again inside those dimensions.

 

I have tried several things to correct this:

1)  I tried applying a "Picture Style" to one of the pictures:  This fixed the scaling.  In fact it fixes the scaling for ALL images on that page, but any on the next pages revert to improper scaling.

 

2)  I tried the "Compress Pictures" option:  This fixed every picture but the first one.  It is also an extra step I do not need to take in Windows 7, and on Windows 7 I don't have to discard cropped out areas in order for printing to work.  I tested that by opening a docx made on Windows 7 and printing:  the images maintained their style from Windows 7.  I could also uncrop those photos back to original sizes.

 

3)  I tried saving the file before printing:  no change

 

4)  I tried rebooting:  no change

 

5)  I tried using pasted screenshots vs premade pictures:  both suffer the same problem.

 


Samples:

Album

 


How should I proceed?  Is this a Word thing or a Windows 8 driver thing?  Any help is much appreciated.

Hello, when I copy text from a Web page

Posted: 08 Apr 2013 03:41 PM PDT

into a Word 2007 new document, Word won't paste the text into the new document as it should by using the Paste command (or Ctrl + V). The Web page is an Adobe online document. Notepad, however, will accept the Paste command. If I go to other Web pages, I am able to copy and paste text into the (same) Word doc. If I go to another Web page at Adobe I can also use the copy and paste command just fine again with the same Word doc.

 

Any ideas what this might be?

 

Thanks

MS Starter 2010 Query

Posted: 08 Apr 2013 01:20 AM PDT

Hello,

Yesterday through recovery disc I have re installed the windows and also started using Microsoft Office 2010.But today morning I believe I got an update from MS office and I clicked on that and after that I am getting an error while opening word file which states "microsoft office starter 2010 cannot be opened and its showing repair in the control panel".So please let me know how to solve this issue in order to get my ms starter 2010 work Properly.

Regards,
Prateek Bhatia

Changing location of CD install - Microsoft Office forums

Changing location of CD install - Microsoft Office forums

Changing location of CD install

Posted: 25 Jul 2004 11:04 AM PDT

"Milly Staples [MVP - Outlook]" <org>
wrote in message news:ek$phx.gbl... 
the 

thanks for the info!

Remove Acrobat from toolbar

Posted: 24 Jul 2004 12:59 PM PDT

I found an easier way, I went to the link below and started going
through the process described on the link and found a PDFMaker template
in the Office "Startup" folder and one in the XL Start folder. I just
deleted those templates and all is well.

Thanks for the link though, bookmarked it.

Mark
 
 

Critical column Microsoft Project

Critical column Microsoft Project

Critical column

Posted: 29 Jun 2004 11:12 AM PDT


"Mark Durrenberger" <com> wrote in message
news:%phx.gbl... 
"Critical" 
is 
management 
the 

And for those new to the concept of float, Microsoft Project ignores
convention and calls float "slack".
Look at the Total Slack column to see if a task is critical (total slack =
0) or how close to critical it is.

-Jack

Baseline set but not visible in gantt

Posted: 29 Jun 2004 10:41 AM PDT

Here is how to trouble shoot.

In the gantt view go to insert menu / select column / choose "Baseline
Start"
If the column is empty or has NA all over it, you don't really have a
baseline set. Set a baseline (not an interim baseline) and start over.

If there are values there then go to format menu / select barstyles / scroll
down the list to the first open space.
Type a name, set the appearance you want using the controls on the bottom
half of the form, set "Show for ... Tasks" to be "Critical", set it to be
"From" baseline start "TO" baseline finish.

Your baseline should now show up. If it doesn't you have a real problem.

-Jack

"George Wilson" <microsoft.com> wrote in message
news:2299a01c45e0c$4624eca0$gbl... 

Showing a fixed work effort with a long duration

Posted: 29 Jun 2004 08:54 AM PDT

Louise --

Select the task and then click Window - Split to apply the Task Entry view.
In the lower viewing pane (Task Form), do the following:

1. Select a resource from the Resource Name column
2. Enter 5 hours of work in the Work column
3. Set the Task Type as Fixed Work
4. Click the OK button
5. Change the Duration to 15 days
6. Click OK

Microsoft Project will automatically recalculate the Units as 4%. Hope this
helps.

--
Dale A. Howard [MVP]
Enterprise Project Trainer/Consultant
http://www.msprojectexperts.com
"We wrote the book on Project Server"


"com" <microsoft.com> wrote
in message news:22e4601c45df1$6bdfb120$gbl... 

Assigning task as "monthly", "qtrly" & visually displaying on cale

Posted: 29 Jun 2004 08:26 AM PDT

That is what I've done so far. But, how do I customize a visual display of the recurring tasks? I'd like an icon or something to display in the calendar view (or other view) for each time that scorecard is due to be published. Right now the only visual display is the circular arrow in the left and I think it says "1hr" for each occurance can I make it say something else or show an icon instead? If so, do I do this with the resource customization or with a field customization?

And, do all the parents in the outline HAVE to have the 1hr displayed for all their child activities, can I make them only show on the parent of the recurring task and not the "initiative" and "objective" lines I have them linked to above that task.

Make sense?

Another silly question, how do I add a column on the far right? It always adds it to the left of the last column and I can't figure out how to get the far right column moved to where I want it to go.

"Dale Howard [MVP]" wrote:
 

Duration Calculation--hopefully simple question

Posted: 29 Jun 2004 07:30 AM PDT

Hi,

I am nearly convinced default working hours is the culprit.

--
Jan De Messemaeker
Microsoft Project Most Valuable Professional
http://users.online.be/prom-ade/index.htm
32-495-300 620
"Phil T." <microsoft.com> schreef in bericht
news:com... 
I'm still having this problem. I have a task, the duration of which is 3
days, work is 48 hours, two people, working full time (8 hour days) are
assigned to this task. So everything is correct, but project schedules the
start date of the task for 7/13 and the finish date for 7/14, which is only
two days. I cannot figure out how to simply get the start and finish dates
to match the duration without making everything go wacky. 
the 
through 
days). 

microsoft project 2003 professional

Posted: 29 Jun 2004 06:40 AM PDT

Hello Bob,
Try to run the format_Duration macro :
Tools / Macros / Macro / Format_Duration / Run...

Gérard Ducouret [Project MVP]
PragmaSoft ® - Paris

"bob" <microsoft.com> a écrit dans le message de
news:com... 

With Master/Subs - only one user can edit?

Posted: 29 Jun 2004 05:56 AM PDT

To be more specific, a file can be open by two or more users at a time, but
only one person can have it open for editing. All others are read only and
won't see changes until the person editting saves, and the readers close and
reopen the file.

-Jack



"Gérard Ducouret" <fr> wrote in message
news:phx.gbl... 
Project 
message 

Resource Reports by Project

Posted: 28 Jun 2004 05:57 PM PDT

Thanks John, you've given me a lot to try. In the mean time I found that
if you unlink the project you don't want to see from the resource pool,
then you will only get the assignments from the project you do want to
see.....and the reports work.

Thanks....



John wrote:
 

Resources In alphabetical Order

Posted: 28 Jun 2004 02:58 PM PDT

Hi,

Simplest is to do a Name sort in Project first. If you select the renumber
option the ids renumber so resource names are alphabetic.

You can do the name sort manually or in VBA.

--
For VBA posts, please use the public.project.developer group.
For any version of Project use public.project
For any version of Project Server use public. project.server

Rod Gill
Project MVP
For Microsoft Project companion projects, best practices and Project VBA
development services
visit www.projectlearning.com/
"Esperanza" <com> wrote in message
news:google.com... 

Microsoft Project is a spreadsheet system software?

Posted: 28 Jun 2004 12:24 PM PDT

Interesting thread.
Doris rasies a good point - though not the point she mentions...

Do the Excel people and the Project people at MS ever talk?

I believe the "grid" in project would benefit greatly from excel like
functionality

For example when creating a formula in "Text1" why not just type (as in
excel)
=Text2 & " " & Text3 & " " & Duration9/60/8 '(convert minutes to hours and
hours to days)

or being able to set durations with "=Activity14.Duration" (the same
duration as Activity 14)

Perhaps define names or named ranges?

I bet there are other great ideas out there - your thoughts?

Mark


--
__________________________________________________ _______
Mark Durrenberger, PMP
Principal, Oak Associates, Inc, www.oakinc.com
"Advancing the Theory and Practice of Project Management"
__________________________________________________ ______

The nicest thing about NOT planning is that failure
comes as a complete surprise and is not preceded by
a period of worry and depression.

- Sir John Harvey-Jones
"Doris" <microsoft.com> wrote in message
news:com... 
spreadsheet system software( just like excel)? it was made by using
spreadsheet programming language? or other? 

Customize a Module View in project

Posted: 28 Jun 2004 04:39 AM PDT

Rod,

It sounds to me like she means the Forms that appear on the bottom
half of the screen when you click Window>Split. If that's the case, I
don't think you can customize those forms, can you?

Sarah

Microsoft Works - no ACCEPT button

Microsoft Works - no ACCEPT button

no ACCEPT button

Posted: 03 Oct 2004 05:22 PM PDT

http://support.microsoft.com/default.aspx?kbid=255875
See if this helps
--
Paul Ballou
MVP Office
http://office.microsoft.com/clipart/default.aspx
http://office.microsoft.com/templates
http://office.microsoft.com/home

Control the things you can and Don't Worry about the things you can't
control.

"Raymond" <microsoft.com> wrote in message
news:17ab01c4a9a8$41871c30$gbl... 

Microsoft Word - picture in a table

Microsoft Word - picture in a table

picture in a table

Posted: 12 Apr 2013 06:57 AM PDT

I'm trying to put a picture in a table that I placed on a brochure (a calendar with dates on it). I place the picture but when I go to print preview the picture moves. What am I not doing?

Document preparation

Posted: 11 Apr 2013 06:47 PM PDT

How do i set Microsoft Word 2007 to prepare documents in 6 1/8 by 9 1/4- inch booklet format ?

Word wrap: How to eliminate it except for paragraphs? (For reading PDF's on Ereaders / Ebook Readers.)

Posted: 11 Apr 2013 05:48 PM PDT

My vocabulary in this subject is just about non-existent.  Sorry.  

I have a .txt file that I want to move onto an  ereader or  ebook reader.  But the sentences or lines get truncated (chopped up).  I set the word wrapping off.  That resulted in less chopped up lines but its still not even close to the PDF layout.  There are still a lot of interrupted sentences.  Is there a better way of doing this?  I want everything together except for the start of a new paragraph.  This is a necessity for reading PDF's on ereaders as PDF's rarely display well or properly or the text size is  often microscopic.  But when you use a .txt file it works great and on the Kindles you have many sizes to choose from.  Of course you lose formatting but for most material there is just text so its fine.   

Unable to modify files after uninstalling Office 2010 trial

Posted: 11 Apr 2013 01:07 PM PDT

i purchased a new Dell Desktop with office 2010 trial run installed. after using it for the trial run i wanted to get rid of it because a did not want to buy the complete version. i went to control panel and uninstalled the program but the only thing that uninstalled was the name in the control panel. 
when i go into one of my files that i created in word it wont let me edit or add. it is just like locked. if i have to i guess i could delete all of the files i compiled in word but that seems like a waste. is there any way to use the files i already have with out buying the full version of Office 2010?

Microsoft Works and Microsoft Word

Posted: 11 Apr 2013 12:35 PM PDT

Please could any one advise. I use Microsoft Works at the moment, is it possible to convert my spreadsheet which is in Microsoft Word to be readable and editable in Works?



Thanks

Pam McD

Require formfield to be filled in

Posted: 11 Apr 2013 12:18 PM PDT

I have a form which consists of multiple text form fields, some are visible and enabled (can be filled in), others are hidden and disabled. The form also has a few date content controls.  I have a submit button on the form and am trying to run a macro so that when the submit button is pressed it will look at the form and ensure that all of the date content controls as well as any form field that is visible and enabled must be filled out. (if adding the date pickers is too hard I can replace them with form fields as well). I dont know if there is a way so that it will only allow a form field to be blank if it is hidden and disabled.

Fill-in Bubble symbol

Posted: 11 Apr 2013 08:13 AM PDT

I am making a multiple choice question test for my class.  They will answer the questions by filling in the bubble (circle) for either a, b, c, or d.  This is the symbol:  ⃝

I also want to make an answer key by having the bubble symbol be filled in with black.  I cannot find that symbol or a way to fill-in bubble with the color using anything in Word.  I see the black bullet but that is too small.

Is there a way to do this?

Thanks,
Les

I am working on a document, and suddenly, the find button (or ctrl+f) does not bring up the box. It is an important function for what I am doing!.

Posted: 11 Apr 2013 07:42 AM PDT

This is Word 2007. It is the same when I try in other documents too.

Labels losing formatting

Posted: 10 Apr 2013 11:11 AM PDT

One user on a system is having issues with labels on one machine:
when she selects a full page of Avery 5164 Shipping labels, instead of giving her a six label template, as it does me, it gives her 2 columns... Any thoughts on where her profile may be damaged?

Thanks,

Email merge not recognizing email address hyperlinks

Posted: 10 Apr 2013 10:49 AM PDT

Hi,

 

Strange problem - I am trying to do an email merge out of Word. We use an Access database as the data source. When we try to send the email, the Check Names dialog box appears stating: Microsoft Outlook does not recognize *** Email address is removed for privacy ***#mailto:*** Email address is removed for privacy ***# (Insert a "real" email address in place of "test".)

 

If we click an email address hyperlink directly through Access, the email is sent, no problem.

 

I tried exporting the data to Excel to use as the data source, but the hyperlink is brought in as: *** Email address is removed for privacy ***#mailto:*** Email address is removed for privacy ***#, and we get the same message.

 

Has anyone encountered this problem? Solution? I'm starting in the Word group, since it's a mail merge...

 

Thanks for any help!

Tammy

 

2010 office word print only one page

Posted: 06 Apr 2013 11:07 AM PDT

When trying to print both sides only one page is printed. On 2007 word the whole document printed on both sides but on 2010 word just the last page prints. Printer checks out good. 

MENYFÄLTEN HAR BLIVIT ÄNDRADE TILL ROSA, HUR ÅR JAG BORT DET?

Posted: 06 Apr 2013 10:04 AM PDT

MENYFÄLTEN HAR BLIVIT ÄNDRADE TILL ROSA, HUR ÅR JAG BORT DET?
Subscribe to: Posts (Atom)