Pages

Search

What does "Save My Settings" save? - Microsoft Office forums

What does "Save My Settings" save? - Microsoft Office forums

What does "Save My Settings" save?

Posted: 11 Jun 2004 10:32 AM PDT

Unfortunately, the Office XP SMS Wizard doesn't do as comprehensive a job for Outlook as it does for other products. Configuration settings (set in Tools < Options) are saved but many other things are scattered among special files are not backed up. If you want to be sure that you get everything, you should back up all the files listed here too: http://www.slipstick.com/config/backup.htm#fileloc

--
Athena [MVP]


"t. wise" wrote:
 

Storing a copy of Office CD on hard drive?

Posted: 10 Jun 2004 09:34 AM PDT

I've never used the Office Resource Kit, but I've made admin installs before. I placed the CD in the drive and ran setup with a switch. Go to START>RUN and type "setup.exe /a" and it will look like it's going through an install. It'll ask you where you'd like to store the files and once given a place to do so, you're on your way! It asks you to accept the EULA and enter your 5x5 cd key. After that, one can run the install from the newly created administrative install point. Note, you may not be able to install Office Updates on the machine. It may give you an "error" stating that you've installed office from an admin install point and that you can't get the updates as you normally would. This install point can be slipstreamed with updates and from there you can update "client machines." If you want to know more about slipstreaming, do a search for it in here or on the support sites.

6-11-04
0900 EDT
Rob

"Milly Staples [MVP - Outlook]" wrote:
 

Install Access 2000 with Office 2003

Posted: 10 Jun 2004 08:44 AM PDT

If it is not an OEM and the upgrade base is neither an OEM version, then the
answer is yes, you can.

Hth,
G.
"Justin" <com> wrote in message
news:1b30c01c44fb9$29e98390$gbl... 

2k3 patches without CD

Posted: 10 Jun 2004 07:34 AM PDT

for the record, its always asking for sku011.cab no matter what patch i'm
installing...

"Tim Mulholland" <com> wrote in message
news:%phx.gbl... 
CD 
hassle 

can't activate by telephone

Posted: 09 Jun 2004 05:36 PM PDT

Finally. I followed all of the steps to clean out the
previous install of Office, disabled all Norton apps, but
the reinstall of Office still had the same problem. Then
I uninstalled all of the Norton apps and went through the
whole process again. Then it worked and everything is up
and running just fine again. What a pain! I have no idea
how Norton could have disabled that feature of the Office
activation when everything was disabled. If Microsoft
wants me to write up a Knowledge base article, I'd be
happy to do it for $200/hour, including "research time" :)

Thanks again Bob and Susan

 
issues with Norton and 
Norton components, 
benefit. 
message 
twice 
luck. 
for 
but I 
installing 
than 
telephone 
wrote 
select 
Office 
problem 
virus 
does 

Off Topic for this forum, I'm sure, but how do I edit the HTML editing programs in IE6?

Posted: 09 Jun 2004 11:37 AM PDT

NM - I think I found it - public.windows.inetexplorer.ie6.browser....

--
Murray
"Murray" <com> wrote in message
news:%phx.gbl... 

Office Assistant Problem after Install

Posted: 09 Jun 2004 06:04 AM PDT

I'm afraid that the Office assistant does not work well when in a
side-by-side install. We're investigating the problem.

Have you tried turning off the Assistant in both products?

--
Thanks,

Eric Lawrence
Program Manager
Assistance and Worldwide Services

This posting is provided "AS IS" with no warranties, and confers no rights.

"kaykayit" <microsoft.com> wrote in message
news:1a22001c44e3e$91200470$gbl... 

Installation key code

Posted: 09 Jun 2004 02:03 AM PDT


Waldo wrote: 


Thank you Phydeux and Chris for your suggestions. I will
try them. Regards. Waldo

How do i paste my business card on to a word doc in xp pro 2003 wo

Posted: 08 Jun 2004 08:04 PM PDT

Answered in Microsoft.public.office.misc.

Please do not multi-post.


--
Milly Staples [MVP - Outlook]

Post all replies to the group to keep the discussion intact. Due to
the (insert latest virus name here) virus, all mail sent to my personal
account will be deleted without reading.

After searching google.groups.com and finding no answer, paul asked:

| How do i paste my business card on to a word doc in xp pro 2003 word

Office 2000 - Install window keeps poping up

Posted: 08 Jun 2004 09:07 AM PDT

I would try installing office logged in as the user with
the install problem. Let me know.
 
it 
does 

Office XP sp3 and IE woes

Posted: 08 Jun 2004 06:49 AM PDT

nope, not messages I was getting exactly. I actually found
a work around, its not pretty but I think its taken care
of. Had to remove Project 2003 and Office, then reinstall
office, then project again.....something there wasn't
happy w/ each other. 
company. 
Windows Installer to Run 
network 
receive the following 
Would you like to 
you receive the 
Setup from the 
receive the first 
Excel.exe again, you 
not installed by 
message in the 
a shortcut, it may 
Office that is no 
possibility, double-click 
whether you 
file in the root of 
contained inside a 
us;290139 
us;290740 
confers no rights. 

Microsoft Word - inserting a blank line in first row of table that appears alone on a page

Microsoft Word - inserting a blank line in first row of table that appears alone on a page

inserting a blank line in first row of table that appears alone on a page

Posted: 12 Feb 2013 10:31 AM PST

If I create a single table on a page (nothing else is on the page except this table) and want to insert a blank line in Row 1 and then type text below that blank line, when I click inside Row 1 and press ENTER, the blank line appears above the table instead of inside Row 1. I have taken the steps below as a workaround. I know about paragraph spacing before and pressing Shift + Enter, but don't want to use those approaches. I need to use the Enter key to create the first blank line because I'm working with a scoring issue in an existing keyboarding program in which students are learning to type a table with a blank line in Row 1. Next publication, I'll be taking a different approach, but for now, I need to have the final table have a hard return above the first line of typed text in Row 1. Is there a simpler way to do that than what I have suggested below? All help greatly appreciated.

To insert a blank line above the first line of text in Row 1, click inside Row 1 and press ENTER 1 time; click inside Row 1 again, press ENTER, and type desired text; move outside the table and delete the extra blank line. 

I changed a .docx to a web page, filtered. Now, everytime I open a new file it's HTML. How do I get back to opening files as .docx?

Posted: 12 Feb 2013 07:24 AM PST

I was changing a .docx to web page filtered to upload a book to Amazon.com.

 

[Moved from feedback]

Microsoft office Pro plus 2013 Legal Paper size.

Posted: 12 Feb 2013 03:32 AM PST

I have a MS Office Pro Plus 2013. I am having a problem with the legal paper size. In the MS Word the default legal paper size is 8.5 by 14, however mine is 8.5 by 13, the problem is whenever I try to customize the paper size to match what paper I have it always say that some elements are out of printing range or something the is within the line, which is true, whenever I print it only prints about 8.5 by 11 which is the letter paper size.

Is there anyway I can print using my 8.5 x 13 paper size?
my printer is HP PSC 1410 all in one and of course I am using 8.5 by 13 inch paper size.

I can print well with other sizes I just never tried photo in photopaper though.

Any help is appreciated.

Convert doc to pdf without losing picture resolution quality

Posted: 11 Feb 2013 06:46 PM PST

I can create a pdf file by selecting Print and then the pdf button.  The software I use to do this is no longer available to me.  I used this software to submit my pdf file with a test and 70 pictures to an on-demand printer.  Before accepting my file, I am required to pass the pdf through the on-demand's filter software that check all pictures have a resolution over 300 DPI.  All the pictures passedd and met the on-demand standard.

 

I now find I cannot get this pdf software now, so I used my Word 2010 software to do a .doc SAVE AS to PDF.  When I passed this new pdf file though the on-demand filter, it would many pictures that did not meet its standard.  Upon research the Word document is 147MB and the first pdf vendor generated file was 80MB after conversion.  When I passed this same Word doc file through the Microsoft 2010 SAVE AS, the pdf file wa 20MB.  The smaller file sounded good, BUT with the Microsoft Word to PDF conversion is loses picture quality and does not meet the on-demand standard.

 

Can I change any parameter in Word 2010 to not reduce the quality of picture resolution in the doc file?  Or can you recommend a Word to PDF file converter that does not destroy the resolution of the embedded jpegs in Word?

 

How to print graphs on the same page as title

Posted: 11 Feb 2013 04:10 PM PST

I am preparing a report where there are a few graphs/charts with titles. I would like the graphs to show on the same page as the title of the graph, the title being texts. How do I do that? I keep having titles on one page and the relevant graph on the next page because there is not enough room on the same page. I'd rather have the title on the next page as well. Do I have to manually enter a few blank lines to push the title to the next page or is there any easier and neater ways to do it? I do not prefer page break either because if I change contents of the report, I would like all titles and associated graphs to still be kept together, without leaving huge blank areas on any page.

 

Any tips?

 

Thanks in advance,

 

Rowena

Office 2010 has become disabled

Posted: 11 Feb 2013 02:17 PM PST

I bought this laptop at Wal-mart and have used the Microsoft Office 2010 for 2 years. Somehow it now is unobtainable. It is asking for the activation code or telling me to purchase another software package. How can I get the original back accessed?

PDF Documents ALWAYS open on Word now. Help!

Posted: 11 Feb 2013 08:49 AM PST

I mistakenly forgot to uncheck the box that says "Always open PDFs in Word" and I don't know how to go back and fix it so PDFs don't automatically open in Word.  Please help! 

What type of word object is a picture link to an excel range?

Posted: 10 Feb 2013 12:38 PM PST

I create Word documents that have links to an Excel spreadsheet. Because I need to move the Excel and Word documents to different machines (home, office, laptop) I needed a way to reestablish the path to the linked Excel file (something that was automatic in versions of Word prior to Office 2007, but apparently has been left out of verions from 2007 on).

 

The majority of links are created by using paste special->paste link as unformatted text. This creates a field object with an ActiveDocument.Fields.Type value of 56 or wdFieldLink. I found VBA code that loops through the documents fields collection and singles out .type 56 and changes the path portion of the link to whatever I specify. It works great.

 

However, I also use paste special->paste link as picture to bring a range of Excel cells into the document. The range is typically of a "grid" type display, some of which are large. When pasted as a "picture", the displayed grid can be sized to the page as easily as an image (works better than any of the other paste options). When I look in the document's link list, the links pasted as pictures appear like the other links (with a path, file name, specific worksheet and cell reference), but my VBA code which is looking through the ActiveDocument.Fields doesn't see the links pasted as pictures. I assume it's because the links pasted as pictures are not actually part of the fields collection. Note: I wrote a routine to display ALL ActiveDocument.Fields and their ActiveDocument.Fields.type value. The links pasted as pictures did not appear. 

 

What collection are links "pasted as pictures" a member of? What would their .Type value be?

 

 

stacking three assistants vertically in smart art org chart

Posted: 10 Feb 2013 11:16 AM PST

I have org chart for homework. I am required to stack three assistants in a vertical stack. By default, two assistants are side-by-side. When I add 3rd assistant it stacks the third below one of the side-by-side assistants.

I have tried different methods to select the three assistants (dragging box around all three to highlight, shift-clicking, control-clicking, etc) and using the layout pulldown menu, with no result. Selecting left-hanging, right-hanging with multiple boxes selected doesn't have any visible effect.

I have tried grabbing the third box and manually moving it below the other two, but it auto-drops right on top of the second box.

Any suggestions on how to make three assistants align in vertical stack below a parent?

Microsoft Word - In Word 2010, only a few images are replaced with placeholder

Microsoft Word - In Word 2010, only a few images are replaced with placeholder

In Word 2010, only a few images are replaced with placeholder

Posted: 10 Feb 2013 02:40 PM PST

I have many images in my document, most of which are individally inserted, a few are inside a drawing canvas.  During editing, I like to use Picture Placeholder, however not even a third of the images are replaced with a placeholder. 

 

Having every image redrawn during scrolling through my document is annoying.

 

All of the images are jpeg format.

 

Any ideas how to get Placeholder to hide all the images?

 

Thanks,

Sharon

Word doc missing from drop down menu

Posted: 10 Feb 2013 12:42 PM PST

Dear all,

Recently wiped my pc hard drive & restored all software etc. Re-installed Microsoft office home & student 2007, all been working well for approx 4 weeks. (I have a genuine disc, purchased a few years back new).

Office package still working, though one problem; If you try & create a new word doc by right clicking, then selecting 'new', where there are many files to choose, excel, power point etc, the word doc option now isn't there?? Journal document seems to have taken the place of word document?

If I go to my start menu programs & click on the Microsoft office file, then word doc is shown & available, confused, you bet!

Many thanks,
Tony LJ

Unable to insert page numbers in Word 2007 documents

Posted: 10 Feb 2013 11:45 AM PST

I have Office 2007 installed with Windows 7 Pro 64-bit. I have been unable to insert page numbers in Word documents, and the help document only gives instructions for Vista and XP. Also, although can find the U.S. locale folder 1033, I cannot find the Building Blocks.dotx template (with or without the space).

Office 365??

Posted: 10 Feb 2013 09:21 AM PST

I have just purchased office 365 and followed all instructions, but now i have not got a clue where and how to open up word so my children can start doing their homework.

Where is this word 2013 and where do i open it

Printing a book - text on odd numbered pages with even numbered pages left blank

Posted: 10 Feb 2013 01:34 AM PST

I have word document running to 500 pages; the sheet size is A4.

I need to print this document and bind into a book. For this, I would like to print this document in the form of a booklet each with 16 or 32 pages of A3 sheet in landscape orientation folded in the middle. I will have pages 1, 3 , 5 and so on printed but page numbers 2,4, 6 and so on will remain blank.

How can I do this either with Word 2010 or Publisher 2010?

If it is not possible with MS Office what is the solution?

Any detailed instruction  greatly appreciated.

Macro to find a variable length text and replace it with some words

Posted: 09 Feb 2013 01:24 AM PST

Hi,

I'm trying to have a macro that select some text and replace it by a couple of words. My selection of text is of variable length but always starts and ends with the same words (here "START" and "The End"), so I'm trying to have a macro that selects a range based on those two strings of characters as beginning and end (case is important to accurately select the range) then replace it with words of my choice (here "My choice"). My current try does select the proper range but instead of replacing the whole selected range, it replaces only the word "The End" with "My choice".

I guess I have a problem in the hierarchy of actions...

Sub EngCleanBegin()
'
' EngCleanBegin Macro
'
'
    Dim myrng As Range, endrng As Range
Selection.HomeKey wdStory
Selection.Find.ClearFormatting
With Selection.Find
Do While .Execute(findText:="START", MatchCase:=True, Forward:=True, Wrap:=wdFindStop) = True
Set myrng = Selection.Range
Loop
End With
Selection.HomeKey wdStory
Selection.Find.ClearFormatting
With Selection.Find
Do While .Execute(findText:="The End", MatchCase:=True, Forward:=True, Wrap:=wdFindStop) = True
Set endrng = Selection.Range
Loop
myrng.End = endrng.End
myrng.Select
With Selection.Find
        .Replacement.Text = "My choice"
        .Forward = False
        .Wrap = False
        .Format = False
        .MatchCase = False
        .MatchWholeWord = False
        .MatchByte = False
        .MatchAllWordForms = False
        .MatchSoundsLike = False
        .MatchWildcards = False
        .MatchFuzzy = False
    End With
    Selection.Find.Execute Replace:=wdReplaceAll
End With 
End Sub

Word and Excel restart after program is closed

Posted: 08 Feb 2013 09:25 AM PST

I am running Office 2013 on a computer recently upgraded to Win 8. When I exit Word or Excel, i get an immediate error message and then the Word is restarting message.

I have searched for answers and have not found any that pertain to my situation.

Can't change Default Table text size in Word 2010

Posted: 08 Feb 2013 08:33 AM PST

I am using Word 2010 to create a template but it won't allow me to change the default table text size from Myriad 11pt to 10pt.  The dropdown to reduce size is there but it won't apply when I click anything below normal document text of 11pt.

The whole table is formatted correctly apart from the text size.  I can apply the correct styles but then when I add a new table to the template it still contains the wrong style.

error message: The list of common spanish (Spain-Modern sort) Auto corrections is not available...

Posted: 07 Feb 2013 09:54 AM PST

I'm constantly getting the error message: "The list of common spanish (Spain-Modern sort) Auto corrections is not available. This feature is not currently installed. Would you like to install it now?" It doesn't matter if I click yes or no, it keeps popping up.

Microsoft Word - Can't open passworded protected Mac Office 2011's Word .docx in Office 2000 SP3 with converter packs?

Microsoft Word - Can't open passworded protected Mac Office 2011's Word .docx in Office 2000 SP3 with converter packs?

Can't open passworded protected Mac Office 2011's Word .docx in Office 2000 SP3 with converter packs?

Posted: 09 Feb 2013 07:23 PM PST

Hello.

Is old Office 2000 SP3 unable to open password protected Mac Office 2011's Word .docx in old, updated Windows XP Pro. SP3? If I remove its password when saving in Office Mac 2011 and opening it, then it is fine. Does the converter packs not recognize password protection or something? Opening is detected as Word 2007 format.

Thank you in advance. :)

How does Office 365 HP Work?

Posted: 09 Feb 2013 06:57 PM PST

I subscribed to Office 365 Home Premium and clicked the install button. After installation, when I open a word document, it opens with Open Office. Is there someplace to find out how to use the programs? Should there be desktop icons? I tried to view the videos but they won't open.

How to format a set of keyboard automatically without using Find and Replace?

Posted: 09 Feb 2013 01:45 PM PST

I'm not sure if this feature even exists in Word 2013 and maybe this should be considered as a request feature. Nonetheless, I'd like to do the following:

I usually takes notes for my programming classes and among the writing I do, there's certain keywords that I usually format a special way different than the rest of my notes. This serves for me to highlight them.

I've found myself formatting these keywords as I type them which leads to time loss and frustration. One solution I thought of was to finish first my document, and then use Find and Replace to format in bulk. This could work for me. However, I'd like to know if there's an easier way to accomplish this.

I've been looking for some sort of list that I could add words to, select the kind of output format I want and then Word would automatically change those keywords to the desired format as I type. Since these aren't regular words (e.g. "#include", "cout", "iostream") I don't think there'd be a problem with formatting wrong parts of my notes.

Thanks for any help.

I want to include the name and address of the person the letter is going to, but when I do it comes out double spaced. How do I not have the double spacing?

Posted: 09 Feb 2013 12:17 PM PST

When I include the name and address of who the letter is going to in the document, the name and address come out double spaced. The rest of the letter is single spaced. How can I correct this. I've gone into the paragraph area and told it to be single spaced, but the name and address is still double spaced. Help please!?

Microsoft office 2010 word and excel shut down when trying to cut and paste

Posted: 09 Feb 2013 12:38 AM PST

When using microsoft office 2010 home and student in both word and excel the messages word has stopped working, followed by word is restarting appear. Word and excel then shut down and restart. After restarting the problem happens again. This happens twice and then the message that word has encountered an unknown problem and to close the program. I am working with Microsoft Vista

Nested IF fields in Word 2010 -- How?

Posted: 07 Feb 2013 02:54 PM PST

I have been driving myself crazy trying to make a multiple IF statement formula work for a table I have create. 

The table has a column set with controls to answer Yes or No. 
It has another column set with controls to select High, Medium, or Low.

I am trying to make the following statements work (inside one cell):

IF (R2C3 = "Yes" and R2C4 = "High") then return "100"

IF (R2C3 = "Yes" and R2C4 = "Medium") then return "50"

IF (R2C3 = "Yes" and R2C4 = "Low") then return "10"

IF (R2C3 = "No") then return "0"

Where R2C3 is Row 2, Cell 3.


Can someone help me? I just cannot figure out how to nest the IFs properly, and I have not experience with VB.


Thanks!!

0X80041002 error - Microsoft Exchange

0X80041002 error - Microsoft Exchange

0X80041002 error

Posted: 14 Jul 2004 07:34 AM PDT

Please email help to com. Thanks

Win2k3 and exchange 2k3

Posted: 14 Jul 2004 06:10 AM PDT

OK - try an AD or Windows Networking group.

Also - make sure that all servers and workstations specify *only* the
internal AD-integrated DNS server's IP address in their network settings.
The AD-integrated DNS server should be set up with forwarders to your ISP's
DNS servers for external resolution. See
http://support.microsoft.com/default.aspx?scid=kb;en-us;300202 for more
info.

Gary Fowler wrote: 

Unbelievable Exchange Server Assertion

Posted: 13 Jul 2004 12:00 PM PDT

actually yah - depending on how they chose to back it up. 3rd party
programs are smart enough to be able to restore individual mailboxes, but if
the use the integrated back with 2003 - in order to restore - it restore the
entire thing.
"Jerre" <com> wrote in message
news:com... 

Double exchange servers

Posted: 13 Jul 2004 05:39 AM PDT

I understand that this isn't something you will do in a hour!!
I also have the problem that I already have a exchange server running.
And if I'm good informed I first have to deinstall exchange...
If I want the data also to be bombproof is there a way to accomplish this
with microsoft or do I need 3-party software then?

Thx Ramon


"Lanwench [MVP - Exchange]"
<donotsendme.unsolicitedmail.atyahoo.com> schreef in
bericht news:phx.gbl... 
it 
http://www.microsoft.com/technet/prodtechnol/exchange/2000/deploy/exonclus.mspx 
http://www.microsoft.com/ntserver/ProductInfo/Enterprise/clustering/clustering_faq.asp 

Initial zero dropped

Posted: 12 Jul 2004 09:59 PM PDT

Hi,
this is an exchange newsgroup but anyway. try to use strings instead of numbers...

"Darrell" <microsoft.com> wrote in message news:363201c46896$31109550$gbl...
 

Error when sending email to AOL

Posted: 12 Jul 2004 07:24 PM PDT

Thanks, I will check it out.

Best,

Anna
"Lee Derbyshire" <com> wrote in message news:de...
AOL has a very strict email policy: http://postmaster.aol.com/guidelines/ , the part that catches a lot of people out is the bit about residential IP blocks.

Lee.

--
_______________________________________

Outlook Web Access For PDA , OWA For WAP:
www.leederbyshire.com
email a@t leederbyshire d.0.t c.0.m
_______________________________________

"Anna" <net> wrote in message news:%phx.gbl...
Hi,

I was hoping that someone might be able to tell me why we are having troubles sending emails to AOL. We are using a Exchange 5.5 server.

The bounce back msg. is telling us:

Your message did not reach some or all of the intended recipients

Subject: Friday

Sent: 7/2/2004 4:15 PM

The following recipient(s) could not be reached:

'com' on 7/2/2004 4:16 PM

The recipient was unavailable to take delivery of the message

The MTS-ID of the original message is: c=US;a= ;p=Service Specialt;l=THESERVER-040702231504Z-206

MSEXCH:IMS:Service Specialties:Sylmar:THESERVER 3554 (000B09AA) 554 Connecting IP: 24.199.53.50

Obviously I'm new to this Exchange thing and I'm not sure how to fix it.

Thanks very much.

Anna

Global/Team Calender

Posted: 12 Jul 2004 09:50 AM PDT

Precision (again) wrote: 

That's what Free/Busy is for, I believe!

How to analyze tracking logs ???

Posted: 11 Jul 2004 06:11 AM PDT

thank you dude
i will try your idea

and about the parsers
i saw a lot of them
can you recomend any one
you trusted ( an open source one )
i'll be very thankfull for that

Regards....

"Chris Scharff [MVP]" wrote:
 

Quarantine filling C: every friday

Posted: 10 Jul 2004 08:31 AM PDT

In the last exciting episode, "johannes"
<microsoft.com> wrote:
 

Your file based AV software isn't scanning Exchange working
directories is it? Cause that would be all kinds of bad. Where is the
realtime software finding the viruses initially that it is reporting?
In the temp directory itself?

SMTP Error - Mail must be to or from host domain

Posted: 09 Jul 2004 12:45 PM PDT

In the last exciting episode, "Joe Williams" <com> wrote:
 

Your smart host is receiving a message from the sending MTA and
believes that it is neither to or from your domain. That could happen
if someone is sending a message (from outside) to a custom recipient
in your organization for example. Is it happening when internal
senders send a message to external recipients?

You might look at the SMTP protocol logs of your server or the
protocol logs of the smart host of you control it.
 

Exchange 2003 Error

Posted: 09 Jul 2004 12:22 PM PDT

Hi Ana,

Thanks for your update.

I am glad to know the issue is resolved.

If need further help about this issue, just post back to let me know.

Have a nice day!

Thanks & Regards
Alan Sun
Microsoft Online Partner Support

Get Secure! - www.microsoft.com/security
================================================== ===
When responding to posts, please "Reply to Group" via your newsreader so
that others may learn and benefit from your issue.
================================================== ===

This posting is provided "AS IS" with no warranties, and confers no rights.



--------------------
|Content-Class: urn:content-classes:message
|From: "Ana" <microsoft.com>
|Sender: "Ana" <microsoft.com>
|References: <2a23a01c465ea$0525ea20$gbl>
<phx.gbl>
<2ba8101c46808$b140d660$gbl>
<2bc0b01c4681b$99a99510$gbl>
<phx.gbl>
|Subject: RE: Exchange 2003 Error
|Date: Tue, 13 Jul 2004 17:14:18 -0700
|Lines: 321
|Message-ID: <2bab801c46937$81174480$gbl>
|MIME-Version: 1.0
|Content-Type: text/plain;
| charset="iso-8859-1"
|Content-Transfer-Encoding: 7bit
|X-Newsreader: Microsoft CDO for Windows 2000
|thread-index: AcRpN4EXWn1kXgz+RziCBq9ARXpvEQ==
|X-MimeOLE: Produced By Microsoft MimeOLE V5.50.4910.0300
|Newsgroups: microsoft.public.exchange.misc
|Path: cpmsftngxa06.phx.gbl
|Xref: cpmsftngxa06.phx.gbl microsoft.public.exchange.misc:111023
|NNTP-Posting-Host: tk2msftngxa14.phx.gbl 10.40.1.166
|X-Tomcat-NG: microsoft.public.exchange.misc
|
|Thank you for your help. The problem has not come back
|since we entered the registry key. We also left our Anti-
|virus programs running.
|>-----Original Message-----
|>Hi Ana,
|>
|>Thanks for your posting back.
|>
|>I suggest you configure the "Maximum allowed sessions
|per user" value to
|>isolate the issue.
|>
|>As for the third party tools, you may disable them
|temporary to narrow down
|>the issue for your situation.
|>
|>For more information about Exchange and antivirus
|software, you may look
|>into the following article:
|>
|>823166 Overview of Exchange Server 2003 and antivirus
|software
|>http://support.microsoft.com/?id=823166
|>
|>Please inform me of the results. Have a nice day!
|>
|>Thanks & Regards
|>Alan Sun
|>Microsoft Online Partner Support
|>
|>Get Secure! - www.microsoft.com/security
|>================================================ =====
|>When responding to posts, please "Reply to Group" via
|your newsreader so
|>that others may learn and benefit from your issue.
|>================================================ =====
|>
|>This posting is provided "AS IS" with no warranties, and
|confers no rights.
|>
|>
|>
|>--------------------
|> |Content-Class: urn:content-classes:message
|> |From: <microsoft.com>
|> |Sender: <microsoft.com>
|> |References: <2a23a01c465ea$0525ea20
|$gbl>
|><phx.gbl>
|><2ba8101c46808$b140d660$gbl>
|> |Subject: RE: Exchange 2003 Error
|> |Date: Mon, 12 Jul 2004 07:22:02 -0700
|> |Lines: 197
|> |Message-ID: <2bc0b01c4681b$99a99510
|$gbl>
|> |MIME-Version: 1.0
|> |Content-Type: text/plain;
|> | charset="iso-8859-1"
|> |Content-Transfer-Encoding: 7bit
|> |X-Newsreader: Microsoft CDO for Windows 2000
|> |Thread-Index: AcRoG5mpng1NYezpRm2/IIi0gGNRJg==
|> |X-MimeOLE: Produced By Microsoft MimeOLE
|V5.50.4910.0300
|> |Newsgroups: microsoft.public.exchange.misc
|> |Path: cpmsftngxa06.phx.gbl
|> |Xref: cpmsftngxa06.phx.gbl
|microsoft.public.exchange.misc:110964
|> |NNTP-Posting-Host: tk2msftngxa11.phx.gbl
|10.40.1.163
|> |X-Tomcat-NG: microsoft.public.exchange.misc
|> |
|> |One more question. Is there a best practice with
|regard
|> |to setting the value "Maximum allowed sessions per
|user"?
|> |>-----Original Message-----
|> |>Thanks.
|> |>
|> |>We currently are running SP1 for Exchange. Also,
|I
|> |>checked for that registry entry and it does not
|exist. I
|> |>have not added it yet, but plan to shortly.
|> |>
|> |>When you say disable all third-party software
|such as
|> |anti-
|> |>virus software, do you mean permanently, or just
|while
|> |>changing this registry setting? I am not sure if
|> |>permanently would be feasible, since we rely
|heavily on
|> |>this protection. Other than anti-virus software,
|there
|> |>are no other third-party products running on
|Exchange.
|> |>
|> |>Thanks for you help
|> |>
|> |>>-----Original Message-----
|> |>>Hi Ana,
|> |>>
|> |>>Thanks for posting here.
|> |>>
|> |>>According to the situation, I suggest you first
|apply
|> |the
|> |>service pack 1
|> |>>for Exchange 2003. For more info, refer to the
|following
|> |>article:
|> |>>
|> |>>836993 How to obtain the latest updates and
|service
|> |packs
|> |>for Exchange
|> |>>Server
|> |>>http://support.microsoft.com/?id=836993
|> |>>
|> |>>Second, please verify the "Maximum Allowed
|Sessions Per
|> |>User" setting in
|> |>>Registry.
|> |>>
|> |>>Warning: If you use Registry Editor incorrectly,
|you may
|> |>cause serious
|> |>>problems that may require you to reinstall your
|> |operating
|> |>system. Microsoft
|> |>>cannot guarantee that you can solve problems
|that result
|> |>from using
|> |>>Registry Editor incorrectly. Use the Registry
|Editor at
|> |>your own risk.
|> |>>
|> |>>1. Click "Start", click "Run", type "regedit"
|(without
|> |>the quotation marks)
|> |>>in the "Open" box, and then click "OK".
|> |>>
|> |>>2. Locate, and then click the following registry
|subkey:
|> |>>
|> |>>
|>
||>>"HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\S ervices\M
|SE
|> |x
|> |>changeIS\Parameter
|> |>>sSystem"
|> |>>
|> |>>3. If the "Maximum Allowed Sessions Per User"
|entry does
|> |>not exist, do the
|> |>>following:
|> |>>
|> |>> a. On the "Edit" menu, point
|to "New", and
|> |>then click "DWORD Value".
|> |>>
|> |>> b. Type "Maximum Allowed Sessions
|Per User"
|> |>(without the quotation marks)
|> |>>as the entry name, and then press ENTER.
|> |>>
|> |>>4. Right-click the "Maximum Allowed Sessions Per
|User"
|> |>entry, and then
|> |>>click "Modify".
|> |>>
|> |>>5. Click "Decimal", type the value that you want
|to set
|> |>in the "Value data"
|> |>>box, and then click "OK".
|> |>>
|> |>>6. Quit Registry Editor.
|> |>>
|> |>>Third, please disable all the third-party
|applications
|> |>running on the
|> |>>Exchange server, especially the antivirus
|software.
|> |>>
|> |>>Also, please check the issue from OWA.
|> |>>
|> |>>I am looking forward to hearing from you. Have a
|nice
|> |day!
|> |>>
|> |>>Thanks & Regards
|> |>>Alan Sun
|> |>>Microsoft Online Partner Support
|> |>>
|> |>>Get Secure! - www.microsoft.com/security
|>
||>>============================================== =======
|> |>>When responding to posts, please "Reply to
|Group" via
|> |>your newsreader so
|> |>>that others may learn and benefit from your
|issue.
|>
||>>============================================== =======
|> |>>
|> |>>This posting is provided "AS IS" with no
|warranties, and
|> |>confers no rights.
|> |>>
|> |>>
|> |>>
|> |>>--------------------
|> |>> |Content-Class: urn:content-classes:message
|> |>> |From: "Ana" <postalias>
|> |>> |Sender: "Ana" <postalias>
|> |>> |Subject: Exchange 2003 Error
|> |>> |Date: Fri, 9 Jul 2004 12:22:05 -0700
|> |>> |Lines: 39
|> |>> |Message-ID: <2a23a01c465ea$0525ea20
|> |>$gbl>
|> |>> |MIME-Version: 1.0
|> |>> |Content-Type: text/plain;
|> |>> | charset="iso-8859-1"
|> |>> |Content-Transfer-Encoding: 7bit
|> |>> |X-Newsreader: Microsoft CDO for Windows
|2000
|> |>> |X-MimeOLE: Produced By Microsoft MimeOLE
|> |>V5.50.4910.0300
|> |>> |Thread-Index:
|AcRl6gUlC1g6TlvNQyGTUB/EnxWkEA==
|> |>> |Newsgroups: microsoft.public.exchange.misc
|> |>> |Path: cpmsftngxa06.phx.gbl
|> |>> |Xref: cpmsftngxa06.phx.gbl
|> |>microsoft.public.exchange.misc:110914
|> |>> |NNTP-Posting-Host: tk2msftngxa12.phx.gbl
|> |10.40.1.164
|> |>> |X-Tomcat-NG: microsoft.public.exchange.misc
|> |>> |
|> |>> |We just installed an Exchange 2003 server
|(which
|> |is
|> |>co-
|> |>> |existing with Exchange 5.5). We got the
|following
|> |>error
|> |>> |in the Application log:
|> |>> |
|> |>> |Source: MSExchangeIS
|> |>> |Event ID: 9646
|> |>> |Mapi session "45282065-5353-3130-2900-
|> |000000000000"
|> |>> |exceeded the maximum of 32 objects of
|> |>type "session".
|> |>> |
|> |>> |This was followed by:
|> |>> |
|> |>> |Source: MSExchangeIS
|> |>> |Event ID: 9646
|> |>> |Mapi session /o=,/ou= /cn= /cn= exceeded
|the
|> |>maximum of 32
|> |>> |objects of type "session".
|> |>> |
|> |>> |Then the Exchange server became
|unavailable and no
|> |>one
|> |>> |could open their mailboxes. We were only
|able to
|> |>restore
|> |>> |mail service after rebooting the Exchange
|server.
|> |>> |
|> |>> |I looked at the following article:
|> |>> |
|> |>> |Event ID 9646 is logged when you try to
|send many
|> |>messages
|> |>> |in Exchange Server 2003
|> |>> |
|> |>> |http://support.microsoft.com/default.aspx?
|> |>scid=kb;en-
|> |>> |us;830836&sd=ee.
|> |>> |
|> |>> |I don't think this article applies to us
|because
|> |we
|> |>only
|> |>> |have two users on the server (while we are
|testing
|> |>to make
|> |>> |sure it is stable), and I am one of those
|users
|> |and
|> |>I
|> |>> |checked with the other user, and neither
|one of us
|> |>was
|> |>> |sending mail through scripts or batches.
|We were
|> |>sending
|> |>> |regular emails.
|> |>> |
|> |>> |Any ideas on what might have caused this?
|We are
|> |>holding
|> |>> |off on moving over more mailboxes until we
|get
|> |this
|> |>> |squared away.
|> |>> |
|> |>> |
|> |>>
|> |>>.
|> |>>
|> |>.
|> |>
|> |
|>
|>.
|>
|

new user not creating mailbox

Posted: 06 Jul 2004 01:52 PM PDT

Nope, I had her logged in all day before I rebooted the
server at EOD and the mailbox created. 
actually created 
time. 
new 
in 
when 
server 

Microsoft Works - Drop-down menu in Works Database

Microsoft Works - Drop-down menu in Works Database

Drop-down menu in Works Database

Posted: 29 Aug 2004 12:32 PM PDT

Brian,
There is no download available and apparently the windows version is
not include with the retail version at least that's according to a sales rep
at the local apple store. I bought mine from the Apple store for education
online this CD contains both Windows and Mac. You might try contacting Apple
as I thought there was non educational version available. If you want to see
a screen shot of a database send me an email.

--
Paul Ballou
MVP Office
http://office.microsoft.com/clipart/default.aspx
http://office.microsoft.com/templates
http://office.microsoft.com/home

Control the things you can and Don't Worry about the things you can't
control.

"Brian Kvalheim [MSFT MVP]" <com> wrote in message
news:phx.gbl... 

Microsoft Cardfile

Posted: 29 Aug 2004 10:40 AM PDT

Do you still have the Win3.1 program for Cardfile?

If you run that program directly, can it open the CRD file from the floppy?

If so, then you need to set up a Windows File Association for the CRD files point to the
Cardfile program.

See the Identifying Attachment File Types and Setting File Associations section of
Decoding Internet Attachments - A Tutorial
http://pages.prodigy.net/michael_santovec/decode.htm#identify


--

Mike - http://pages.prodigy.net/michael_santovec/techhelp.htm


"Ralph-W" <microsoft.com> wrote in message
news:23ef01c48def$383d0600$gbl... 

Spell check /Wordperfect

Posted: 29 Aug 2004 01:58 AM PDT

"Galli Gibson" <com> wrote in message
news:google.com... 

$50 for a spell check program. Ouch!!!

--
"Adults are obsolete children."

Dr. Seuss


---
Outgoing mail is certified Virus Free.
Checked by AVG anti-virus system (http://www.grisoft.com).
Version: 6.0.745 / Virus Database: 497 - Release Date: 27/08/2004

Upgrade v 6 -> v 8 problem ?

Posted: 28 Aug 2004 12:56 PM PDT

Found a workaround for anyone else experiencing this
problem. Can't guarantee it will work in all instances,
but I was able to get Wks 8 installed with this
alternative installation procedure.

Insert the Wks 8 install CD
Open Wdws Explorer
Navigate to your CD drive i.e. D:\
Navigate to folder--> D:\MSWORKS
Right click on file --> WORKS8.MSI
Choose --> *Install* from the pop-up choices

Wks 8 proceeded to install without the error dialogue box
described below. Good luck !

Regards,
Cuyler
++++++++++++++++++++++++++++++++++++++++++++++++++ +++++

 
Installer 
work 
the 

Office Access to Works 8 Spreadsheet

Posted: 28 Aug 2004 10:44 AM PDT

Hi Bruce,

File>Export can save your Access database table to a compatible file
format for Works to open. ( *.csv, *.dbf, *.xls )

Works: Sharing Works Files with Other Programs
http://support.microsoft.com/?kbid=271080

HTH,
--
Kevin James.
Tua'r Goleuni
Microsoft MVP (Works) 1999-2004
Website & FAQ for Works: http://www.btinternet.com/~kevin.james1/index.htm





"Bruce" <microsoft.com> wrote in message
news:1ece01c48d26$b208c790$gbl... 

Migrating data

Posted: 27 Aug 2004 09:32 PM PDT

Here are the steps you should follow. The real trick is getting the two
computers to talk to each other (either via a network or connecting them
together directly using a crossover cable). If all else fails, there are a
couple other options: purchase an external harddrive to make the transfer or
remove the harddrive from the old computer and plug it in as an IDE slave to
the new computer and then copy the data...



1.. Do Windows Update on the XP machine - be sure to get any updates for
Files and Settings Transfer Wizard
2.. Setup the crossover cable
3.. Make sure the machines can talk to each other directly using the
crossover cable as a network
4.. Make sure Firewall is turned off on the crossover cable connect on
both sides
5.. Run Files & Settings Transfer Wizard on the XP machine
1.. Going through the Wizard you'll be able to make a disk for the other
machine (don't use the Windows XP CD to run the wizard on the other machine)
2.. Leave the Wizard running on the Windows XP box and go to the other
machine (when instructed)
6.. Run Files & Settings Transfer Wizard on the old PC
1.. As you go through the Wizard, the LAN option should be enabled an
selected
2.. If it isn't - don't sweat it, just store it to a local folder and
then manually copy it over later.
Hope this helps

Thomas


"Matt" <com> wrote in message
news:1bad01c48cb8$0208d1a0$gbl... 

Word Processor in Works 8 not working

Posted: 27 Aug 2004 11:27 AM PDT

Did you try to reboot your machine?
May be that should help.
 
both 
http://www.btinternet.com/~kevin.james1/index.htm 
message 
word processor. When I 
uses the word 
closes. Any help will be 

Printing Works 2000 Calendar

Posted: 26 Aug 2004 08:37 AM PDT

Hi ZionUMC,

Perhaps these help:

http://support.microsoft.com/?kbid=266000
http://support.microsoft.com/?kbid=281429
http://support.microsoft.com/?kbid=314517
http://support.microsoft.com/?kbid=265990
http://support.microsoft.com/?kbid=269968

This problem was resolved in Works 7, where a new version of
the Calendar program was included.

Works 8 also has a newer version of Works Calendar.

HTH,
--
Kevin James.
Tua'r Goleuni
Microsoft MVP (Works) 1999-2004
Website & FAQ for Works: http://www.btinternet.com/~kevin.james1/index.htm





"ZionUMC" <microsoft.com> wrote in message
news:0afc01c48b82$9fb95870$gbl... 

Print Issue on Works 8 (Word Processor)

Posted: 25 Aug 2004 10:18 PM PDT

Hi Mark,

If you care to, you may post your file to me and I will investigate.

HTH,
--
Kevin James.
Tua'r Goleuni
Microsoft MVP (Works) 1999-2004
Website & FAQ for Works: http://www.btinternet.com/~kevin.james1/index.htm





"Mark Wobecky" <COM> wrote in message
news:0e9301c48bb2$61ea6f90$gbl... 

Lost Word

Posted: 25 Aug 2004 09:28 PM PDT

PowerPoint,Excel, and Word are all part of Office
Word is also part of the Works Suite

Check Add/Remove programs control panel to see if the programs are still
listed?
Try reinstalling the programs from the Office or Works CD's
--
Paul Ballou
MVP Office
http://office.microsoft.com/clipart/default.aspx
http://office.microsoft.com/templates
http://office.microsoft.com/home

Control the things you can and Don't Worry about the things you can't
control.

"Miller" <microsoft.com> wrote in message
news:01d401c48c6c$15003bf0$gbl... 

opening read-only database file

Posted: 24 Aug 2004 07:40 PM PDT

Thank you; I did copy and rename the file as well as remove
all checkmarks in the properties dialog box. In the copy,
the archive file was the one that had the checkmark. Does
that make a difference in how it should be handled?

Thanks.

 

Synchronising Works Calendar

Posted: 23 Aug 2004 10:09 AM PDT

I've tried their website to no avail.

I was wondering if there was any way of doing it through
Works or if there was any third party software available?
Subscribe to: Posts (Atom)