Pages

Search

Microsoft Word - Make columns in same table independent of each other.

Microsoft Word - Make columns in same table independent of each other.

Make columns in same table independent of each other.

Posted: 20 May 2013 05:09 AM PDT

Hi everyone,

I am making my job card on word and I need to have two columns in the same table. I know how to make the table and the columns, the problem I have is that I need to have the first column on the left to have 3 rows and the second column on the right to have 5. Both columns should neatly fit into the same table so obviously the left hand column's 3 rows will be wider than the 5 rows in the right hand column. 

The problem I have is that word doesn't allow me to split the second column into 5 rows because it limits me to the three rows in the left hand column because word wants to align the rows. Is there a way to make the two neighboring column independent of each other so that I can split the left hand column into 3 equal width rows and the right hand column into 5 equal width rows?

I need it to look like this. 

--------------------------------------------------------|---------------------------------------------------- |
|                                                                     |                                                                  |
|                                                                     |-----------------------------------------------------|
|-------------------------------------------------------|                                                                  |
|                                                                     |-----------------------------------------------------|
|                                                                     |                                                                  |
|-------------------------------------------------------|-----------------------------------------------------|
|                                                                     |                                                                  |
|                                                                     |-----------------------------------------------------|
|-------------------------------------------------------|-----------------------------------------------------|

this is a very rough example but you get the idea.

Thanks 

Linking to previous in a document which has continuous section breaks

Posted: 20 May 2013 04:18 AM PDT

I have a document with numerous section breaks, some start on the next page, but many are continuous section breaks.  I need to change the footer for the entire document, but when the documented was created initially the 'Link to previous' wasn't selected.  I don't want to have to go through each section and paste the new footer, so I am going through and selecting Link to Previous.  Unfortunately, where the previous section is a continuous section break, it is not linking back to the previous footer..... it asks if I want to delete existing footer and link to previous and I click 'Yes', but it instead puts in a very ancient footer that must be in someway linked to these continuous section breaks.  Is there anyway to have all sections linking so I only need to change the footer on the first page of the document?

find and replace reacts to replaced text with changes tracked

Posted: 19 May 2013 05:50 PM PDT

I have written a macro to find and replace a number of text strings in a document. When I have change tracking ON and ask it to replace "will aim to" with "will" and then "aim to" with "will", it finds the deleted "aim to" and replaces it again. I have also tried dropping the automated replacement of "will aim to", and just doing the replcement of "aim to", but that gives me "will "(original) , then the deleted text, then the new "will", and I can't do a global replace of "will will" because the deleted text is still seen by the find processor.

Tracking the changes is important as I am an editor and have to show my client all the changes I make.

Apart from making all my changes in the document without tracking them, and then doing a document compare, is there a way to get this macro to work?

pasting several rows and keeping track changes... is it possible?

Posted: 19 May 2013 03:09 PM PDT

I have a question - pasting cells and keeping track changes... is it possible? I want to paste a large amount of text, some of which has track changes in it, from one document to another. I know how to do this when text is not in cells (i.e. just make sure track changes is off in both documents) but when the text is contained in rows it's a no-go, all the changes are accepted when I paste no matter what I do. Can someone help?

 

There are many pages of this so I don't want to do each row individually, it will take forever!

 

If you have a solution I will project love and gratitude towards you telepathically

 

Thanks

I Refreshed my laptop and I lost Office 2010 can I get it back without using another download for it

Posted: 19 May 2013 05:41 AM PDT

I can download Office 3 times and it got destroyed when I refreshed my computer can I get it back w/o using another download.

 

Word docs copying to Office Picture Manager?

Posted: 17 May 2013 12:33 PM PDT

Recently all Word documents have copied into Office Picture Manager (2007) where they can only be opened by right click and selection of programme. What is the likely cause and how can this be resolved please? System is Windows 7.

 

 

Turn off Ctrl+click for users of a Word document?

Posted: 14 May 2013 12:09 PM PDT

I need to know how to make document navigation easier for others. I do know how to remove the need to use Ctrl+click for a hyperlink---however, that's merely an editing setting for me. I have many documents that are reference for other users and would like to allow users a one-mouse click to navigate to various hyperlinks or bookmarks in documents. Please don't tell me to have them change this setting in Word...this is really not an option. I know there must be a way because I've had Word documents from other sources that worked just fine without the need to use the Ctrl button. Thanks. 

Microsoft Works - Works 7.0 e-mail

Microsoft Works - Works 7.0 e-mail

Works 7.0 e-mail

Posted: 26 Oct 2004 11:43 AM PDT

thanks, I'll try it!

"Kevin James - MSMVP Works" wrote:
 

where is it

Posted: 26 Oct 2004 07:43 AM PDT


To solve a similar problem with my Works Suite 2001 Microsoft Works version
6.0 program, WindowsMe.

When the popup displays to insert CD, click to display details, noticed it
is
on the CD as "standard.sbs" file.

Copied the CD "standard.sbs" file to a folder on my hard drive.

The next time I received the popup to insert CD, I clicked to display
details, browsed to the new location of the "standard.sbs" file on my hard
drive, clicked OK.

The result is every time I now insert clipart it goes to the new location.
No more inserting CD.

Hope this helps,
Ken

"DeneseVon" <microsoft.com> wrote in message
news:com...
Somehow I lost my clip art completely. Sooo I removed works 6.0 and
reinstalled it off the cd. Now when I go to use it I have to insert the
disk
into the computer to get clipart. (I can see/select the clip art I want
to
use but when I select it that's when I'm told to insert cd. This gets quite
old). How come the clip art didn't reinstalled with works, where is it and
how do I get it back?

Works default synchronization for my Palm

Posted: 18 Oct 2004 10:11 PM PDT

Sorry Kevin, most of your advice about Works is great, but this is like
telling someone to tear down their house and rebuild it because a picture is
hanging crooked. There's a much simpler solution...

Irishrutter, Right-click on the Hotsync icon in your taskbar. Select
"Custom..." in the menu that pops up. For each of the conduits "Works
Calendar" and "Works Address Book": click the "Change..." button, select the
"Do Nothing" radio button, and check the "Set As Default" checkbox, then
click the "OK" button.

This will stop it from syncing with Works, but it should still sync with
Palm Desktop.

Jeff

"Kevin James - MSMVP Works" wrote:
 

Microsoft Word - My margins will not change, no matter what I set them to, how do I fix this problem?

Microsoft Word - My margins will not change, no matter what I set them to, how do I fix this problem?

My margins will not change, no matter what I set them to, how do I fix this problem?

Posted: 19 May 2013 12:50 PM PDT

I set a custom margin to almost 0" at the top, and now I cannot change the margins from this setting. I have tried changing them from the "Page Setup" dialog box, and it shows that my margins are all 1", but their is still o change in the margin. The margins drop down box also shows that the margins are set to normal, but it does not appear to be anywhere near that.

Word is calculating the word count

Posted: 18 May 2013 04:52 PM PDT

When I save documents, there has begun to appear on the taskbar the message: "Word is calculating the word count". The message never used to show. Why does it show now? Thanks. 

word in office 2010 is a grey screen not responding & will not turn off, Help please

Posted: 18 May 2013 04:43 AM PDT

word in office 2010 is a grey screen not responding & will not turn off, Help please

WORDS2007 needs set up again after Windows update

Posted: 17 May 2013 05:08 PM PDT

Hello! Friends:

My OS is WinXP-Pro. After the recent Windows updates, whenever I invoke my WORDS2007, I encounter this message:

"Please wait while Setup prepare the necessary files"

and it takes a while for WORDS2007 to be ready.

Any advice to remove this annoyance appreciated. Thank you.


Lee CC

How do I make a template with a different watermark on all 3 pages and merge fields on all pages.

Posted: 17 May 2013 02:49 PM PDT

I need to make a template which has a different watermark on each page along with merge fields on all  3 pages.

Word 2007 error message

Posted: 17 May 2013 03:49 AM PDT

Hi, in word 2007 i keep getting the error message "word could not create the work file - check the temp environment variable". I can't understand what this means and i have tried Microsoft fixit and that isn't working. Any advice please as this is driving me crazy. Thanks

How can I print out my Autocorrect Entries in MS Word 2007?

Posted: 14 May 2013 07:12 AM PDT

I use Autocorrect on a regular basis and have many entries.  I often forget what shortcuts I've used and would like to print them out.  Any suggestions?

Custom Multilevel Lists (used as headings) not restarting at 1

Posted: 13 May 2013 09:47 PM PDT

I have created a custom multilevel list to use as headings: 
A Level 1; 
A.1.  Level 2 
A.1.1  Level 3 
A.1.1.1  Level 4 etc. 

except from Level 2 onwards, I ticked the box to not include the Level 1 number (in this case letter), so it is:
A Level 1; 
1.  Level 2 
1.1  Level 3 
1.1.1  Level 4 etc. 

I want the list to start again once there is a Level 1 heading. 

i.e. 
A Title  
1 Sub Title 
1.1 Sub Title 
1.1.1 Sub Title

B Title 
1 Sub Title 
1.1 Sub Title 
1.1.1 Sub Title

At the moment it's doing: 

A Title  
1 Sub Title 
1.1 Sub Title 
1.1.1 Sub Title

B Title 
2 Sub Title 
2.1 Sub Title
2.1.1 Sub Title

How do I get it to restart after a Level 1 entry? I have ticked the checkbox to restart after Level 1 but it doesn't work.

Thanks in advance

Microsoft Word - I Cannot open Word documents or start Fix it

Microsoft Word - I Cannot open Word documents or start Fix it

I Cannot open Word documents or start Fix it

Posted: 18 May 2013 01:41 AM PDT

Good day,
I can't open any word document, any other Office program, or open any fix it solution. I receive the following error message: "The application was unable to start correctly (0xc0150004)". "There was a problem sending the command to the program"

I have tried to scan for Malware with Avast free edition and Malwarebytes, but the scans turn out clean.

PDF files also cannot open with Adobe reader.

I have run Windows Update, but the problem still exists. If I try to Uninstall Word, to try and re-install the application, an error message tells me that a required Dll. is missing.

Please help!
Thanks 



Trouble with Open Office (.odt) documents after installing MS Office

Posted: 17 May 2013 06:21 PM PDT

Hello,

I just purchased Microsoft Office 365 Home Premium version on a trial basis. Prior to this I did not have MS Word on my computer but used Open Office to create documents.
Now when I try to open the documents previously created using Open Office (saved as .odt files), each time MS Word opens them. 

How can I open these documents in the original Open Office format? Any help would be appreciated. I do not want MS Word to open all of my documents. Do I have to remove this Microsoft Office program from my computer? Is there a simpler method? When I open documents, I do not get an option to choose which format I want to open a document in.

Thanks in advance for any suggestions. 

Undoing "update links on save" for hyperlinks

Posted: 17 May 2013 05:02 PM PDT

I have Word documents with a large number of relative hyperlinks. After installing the latest version of Office I found that the relative links had been converted to absolute links--I now know that this can be prevented by unchecking the "update links on save" box in "Word Options".

 

I would like to know how to easily revert the updated hyperlinks back to relative hyperlinks--I know how to do this manually for each individual link but wonder if there is an option to change all the links back to relative hyperlinks?

 

Thanks, Hitesh Patel

To make the Home Screen stay in Microsoft Word 2013

Posted: 17 May 2013 01:25 PM PDT

Lately I noticed when I open Word only the menu bar is visible when I click the Home button the Home screen appears and then when I start typing the Home Screen vanishes. Please let me know how I can make the Home screen to stay always when I am working on a document.    

Word's ellipses (...) are too compressed

Posted: 17 May 2013 12:50 PM PDT

The default Word (2010) ellipsis looks like this: ...

Most publications have spaces between the periods, like this: . . .

I can create my own symbol easily enough, but then the ellipsis potentially breaks in its middle if it's at the end of a line (so one or two of the periods stat on the previous line). In other words, the ellipsis won't stick together, as the default symbol (...) does (and as ellipses should).

Any ideas?

can Word 2003 accept only "added" text from tracked changes?

Posted: 17 May 2013 12:25 PM PDT

I edited a number of documents with Track Changes on. I completely understand accepting all, none, or individual changes. What I want to do is accept all but only "added" text from those tracked changes. I want to leave my deletions alone and intact.  Can this be done? Anybody have a macro they would share to do this?

I cannot download documents, Office 2013, Windows 8

Posted: 16 May 2013 03:36 PM PDT

Hello,

When I try to download a Word, Excel or Powerpoint document from my Gmail, Facebook or Black Board I get an error message that says:

"We're sorry, but Word has run into an error that is preventing it from working correctly. Word will need to be closed as a result.
Would you like us to repair now?"

I've tried both repair options and neither has changed anything. I was able to download documents without problem until about two weeks ago. I haven't changed anything with Office; I haven't done anything with it but some projects since I've downloaded the product. 
Any help would be appreciated.

Thank you,

Cory

Windows 365Home Premium download has morphed out of control. HELP

Posted: 15 May 2013 09:16 PM PDT

Just downloaded Word 365 Home Premium and it has taken over my entire computer. There are over 18+ Windows cells requiring "answers" that show up even before I can see the desktop on logging in.  When I cancel them or downsize them, they keep multiplying. Word has taken over my desktop and applications for games like Zuma, Mahjong Deluxe, Solitaire. Some icons have been "replaced" by Word icons with name of program underneath. Others have original icon, but on trying to access them, they just freeze up.  It has also "eaten" my Avast! anti-virus protection. This is no fun.

 

 This is a nightmare!!!!!!

insert button crashes word 2010

Posted: 13 May 2013 02:27 AM PDT

If I want to select the "insert" button from the symbols Word crashes instant. Every other symbol is working fine. Already tried to reinstall but it didnt help. Any suggestions?

Microsoft Word - Keep Tracked Changes, but have document open showing in Final only?

Microsoft Word - Keep Tracked Changes, but have document open showing in Final only?

Keep Tracked Changes, but have document open showing in Final only?

Posted: 17 May 2013 10:09 AM PDT

Hello everyone -- Is there a way to control the view that shows up when someone opens a document with Track Changes turned off, but with Tracked Changes still in there but not Accepted, and having it open in Final view when the user clicks on the document to open it?

 

Thank you very much,

 

-Lynne

 

 

Search and Replace Macro

Posted: 16 May 2013 11:53 PM PDT

Greetings!

I need to delete (carefully) certain bold numbers from a MS WORD 2010 document, as in the following examples:

Before the macro is run:

Ge 1:6 6 And God ...

The Ge 1:6 is in bold, following by a blank space, then the second 6 is raised font also bold, then this followed by another blank space,

So, after the macro is run the result should be:

Gen 1:6 And God ...

Thus, the raised font second 6 and the following blank space have been removed. Another example:

Before:

Nu 22:33 33 And having ...

After:

Nu 22:33 And having ...

Thus, the raised font second 33 and the following blank space have been removed.

Just to be on the safe side, note that the books, chapters and verses (Ex 22:3 3) come at the head of each sentence, and the raised bold numbers that must be deleted come right after that.

I would deeply appreciate your help.

Moving Word 2003 'AutoText' to Word 2011

Posted: 16 May 2013 11:10 PM PDT

Moving AutoText from Word 2003 to Word 2010?  Here's how:
=========================================

1.  Find and save a copy of the old Word 2003 'Normal.Dot' from its location:
     Probably = C:\Documents and Settings\<username>\Application Data\Microsoft\Templates

 

2.   Copy the Word 2003 'normal.dot' to the new Word 2010 location:
     probably = C:\Users\<username>\AppData\Roaming\Microsoft\Document Building Blocks\1033

 

3.   Once transferred click on the old 'Normal.Dot' template to open it and trigger a file conversion, then save the resulting template as with a new 

      name (see suggestion in step #5)  at:
     probably = C:\Users\<username>\AppData\Roaming\Microsoft\Document Building Blocks\1033

 

4.   The new entry name might be 'Normal-new.Dotx' (<-- be sure to select the new template extension)

 

5.   Rename the Word 2010 original 'Normal.Dotx' to something like 'Normal-Orig.Dotx'


6.   Rename the template just saved above as 'Normal-new.Dotx' to 'Normal.Dotx'. 
      This makes the just transferred and converted file the starting file that Word uses every time you open it.


Restart Word and the transferred AutoText is now present...
==========================================================

I found references on the Internet and here in this forum that helped me figure it out, but nothing quite this step-by-step.  I hope others will find it useful.

Navigation Pane and Master Documents

Posted: 16 May 2013 11:15 AM PDT

I seem to recall that in earlier versions of Word the navigation pane--I think it was previously called the document map--and master documents were both considered fabulous ways to corrupt a Word document.  I'm wondering if that is still true in Word 2010 and 2013.

 

Thanks in advance for any information that you can offer.

 

--Tom

labels wont print correctly

Posted: 16 May 2013 09:09 AM PDT

I am trying to print a full page of labels number in Avery list C2160 the details of the label are all correct and the measurements are correct but the printout is way out.  I have selected the correct paper size A4 and all the borders are correct, but the printer prints it as though there were no borders and not one of the addresses is on a label in full, I have never had this problem with previous versions of word but 2010 seems to be totally out of sync with everything.  If anyone can help me before I throw the program or printer out I would be very grateful.

Microsoft Word NOT working

Posted: 16 May 2013 03:55 AM PDT

I have just bought a HP computer that is only about 5 weeks old.I launch Microsoft Word (Office 2013) and it stops working and fades to white and then I cannot open any documents at all.

 

I try the use Zip and despite me having a free zip tool it is ""elbowed "" out of the way and a WIN ZIP beggar ware sign appears.

 

I am finding that the Metro Apps are shocking and very slow and I cannot understand why a major company would invent something that is basically so confusing to use that you simply cannot use it.

 

I tried to send an email earlier on and Office 2013 just would NOT let me do it.

 

I am experiencing more BUGS than a pest exterminator including messages that  My antivirus and Firewall are NOT switched on and yet I am running a NORTON trial that says ""everything's cool""

 

All our Major Hospitals are still running Windows XP and that encompasses millions of peoples medical records and they are having No trouble ,yet I cannot even open a simple message that has an attachment, sent by a Christian school in regards to School Fees.

 

I understand that Microsoft made XP Too good but I paid $650 Aus for it. This Windows 8 is absolutely JUNK.

All I do is have Misfire after Misfire and it wouldn't even let me do SYSTEM RESTORE. Microsoft seem to want people to buy their software, Yet they just cannot make a system that works. XP excepted.

 

 

 

 

How do I enter my 25 character Product Key for Word 2013?

Posted: 15 May 2013 10:32 AM PDT

Would like to know how to enter the 25 charater product key for Word 2013. After typing in step 1, www.office.com/setup, step 2 tells you to enter the 25 characters. A whole host of sites pop up. Where do I go to complete step 2? Running Windows 7

How do I remove the space between lines.

Posted: 12 May 2013 07:26 AM PDT

When I type in an address, when I wish to move to the next part of the address, I use the Enter and I end up with a space between the lines.

*** Email address is removed for privacy ***

Lost Word doc. 11pm saved version reverted to 6pm version. Where is the 11pm version?

Posted: 12 May 2013 02:50 AM PDT

I lost a Word doc. Saved between 6pm and 11pm....but the version kept is from 6pm. Lost 5 hours of work. What happened?

word not working

Posted: 11 May 2013 07:15 PM PDT

When I had the free trial for word it worked fine but since I paid I cannot get it to work from my apps on my HP desktop why has this happened?  When I go to my account it say to install but there is always a problem and I cannot get any details.

Can I Merge individual pictures along with names onto an ID badge with Word or anything? (I HAVE PROFESSIONAL2007)

Posted: 11 May 2013 06:04 PM PDT

I am trying to make an ID card for each of 200 classmates for a 50th reunion.  I have the high school name centered on top, Class of 64 and 50th reunion on 2nd and 3rd line (to left or right, I don't care) then on the bottom I have the mail merge putting each classmates name.  I am trying to put the picture which was scanned out of the yearbook along side the 2nd and third lines.  I have the data all there, and the mail merge classmate names, but am trying to figure out how to get the picture placed on the badge.
Is it possible???????

Going to try Suse - Forums Linux

Going to try Suse - Forums Linux

Going to try Suse

Posted: 20 Jul 2004 12:48 PM PDT

Eric Cragganmore wrote:
 
Hi,

you can defenitly make your bootloader load both OSes (lilo/grub). If you
don't want to change your bootsector, do the following with lilo:
1. Make lilo write the boot sector in a file
boot=/home/username/bootsec.lin
2. start MS
3. copy bootsec.lin to c: (on a fat parition, you can do this from Linux,
using NTFS->copy the bootsec.lin to a floppy and use MS)
4. edit boot.ini:
add->c:\bootsec.lin="LILO" to the bottom line
5. done. When you boot the next time, your ntloader will give you the option
to start lilo. To get rid of the changes, just delete the last line you
added in boot.ini on your MS system.

Regards, Alex

BUG:Unable to handle kernel paging request

Posted: 20 Jul 2004 10:53 AM PDT

-----BEGIN PGP SIGNED MESSAGE-----
Hash: SHA1
NotDashEscaped: You need GnuPG to verify this message

In comp.os.linux.setup Alberto <it> suggested: 
 
 

man ksymoops contains a few examples and a one-shot script.

[..]
 
[..] 
 

Remove it and try reproducing the oops without it loaded. If you
can't reproduce it without the proprietary module loaded blame
NVIDIA.

--
Michael Heiming (GPG-Key ID: 0xEDD27B94)
mail: echo qr | perl -pe 'y/a-z/n-za-m/'
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.2.4 (GNU/Linux)

iD8DBQFA/i0RAkPEju3Se5QRAifWAJwJCPQ22nt3k7qUJzeOiUvgaMpxvAC gzq2S
EIxQzNzWlC0t1moVrDhxZEQ=
=NQtI
-----END PGP SIGNATURE-----

Get the old email

Posted: 20 Jul 2004 06:08 AM PDT

On Tue, 20 Jul 2004 09:51:59 -0400, Franck wrote:
 
You need to look for and in the directory named something like;
/home/username/.netscape/default/<8-character_name.slt>/Mail

--
Hi! I'm a .sig virus! Please copy me to your .sig! so I can spread
This E-mail is safe, no Microsoft products where used in creating me!

Mandrake Linux Instructions

Posted: 19 Jul 2004 02:21 PM PDT


"James Carter" <com> skrev i meddelandet
news:google.com... 

CD #1 should have all the info you need.

Mandrake 2.6.3-4mdk v. 2.6.3-7mdk - trying to get a wireless card to work

Posted: 19 Jul 2004 01:00 PM PDT

John Stumbles wrote:
 


include/linux/modversions.h is in 2.4 kernels source.
include/config/modversions.h is in 2.6 kernels source.

To build a 2.6 kernel, the simple procedure is:

make xconfig
make && make modules_install && make install

That's it :)

--
,,,
(._.)
/|\+\\
\|/ @u(==-

Dual boot Win2K Pro and RHL Fedora 9

Posted: 19 Jul 2004 12:55 PM PDT

thanks, i fixed it.
Timothy Murphy <maths.tcd.ie> wrote in message news:<oJ7Lc.5016$indigo.ie>... 

Help Closing Ports (Debian Woody)

Posted: 19 Jul 2004 02:25 AM PDT

MonkeyOmen <hush.com> wrote: 

Who cares? You scanned from localhost, so you won't learn anything
from that anyway!

Don't worry about such things. If there were a security flaw in a
default server, a debian correction would fix it at once, and so would
you, automatically, with your nightly updates.
 

This is only going to be open on localhost, where you do need it, and
even if it were open to the world, so what? Nobody has your root
password, so they can't use it, and if they did have, they could get in
via ssh instead (hic: if root login not disabled).
 

This doesn't route. And of course will be protected by tcp_wrappers,
where presumably you have lited what you want to be able to access it.
 

Auth? What? Oh, identd! You need that. Otherwise people out there can't
check that you are who you say you are. Well - you could disable it and
then you act like a ms-win box, and whowould want to do that!
 

You definitely don't want this anywhere on your system!
 

This should be closed to all but local hosts. See your printer setup.
 

These are probably local halves of some connection - but take a look at
what they are. Anyway, you can't tell anything by looking from
localhost.
 

Fine. Ditto, I presume.


Peter

REPOST: Why I hate Linux: List of 9 (trolling please ignore)

Posted: 18 Jul 2004 08:25 PM PDT

Gerard Wassink (nl) wrote:
: On Sun, 18 Jul 2004 20:25:09 -0700, com wrote:

: [snipped some garbage]


: Please do not feed the troll...

sorry.

James Phillips

"ling please ignore)" is cut off on my subject line.

: Plonk


: --
: There's no place like 127.0.0.1
: Gerard Wassink http://linux.family.filternet.nl
: Linux counter #360967, "In a world without fences, who needs gates?"

REPOST: Screw Linux, I'm going back to Windows!

Posted: 18 Jul 2004 08:25 PM PDT

Walter Schiessberg wrote:
 

And that is even funnier than the OP.

NR


-----= Posted via Newsfeeds.Com, Uncensored Usenet News =-----
http://www.newsfeeds.com - The #1 Newsgroup Service in the World!
-----== Over 100,000 Newsgroups - 19 Different Servers! =-----

Debian or Where do I go from here?

Posted: 18 Jul 2004 06:37 PM PDT

s. keeling banged the keyboard in this fashion: 
off, 
http://groups.google.com/groups?q=Netgear+FA311+Debian+Linux&hl=en&lr=&ie=U TF-8&selm=yzswuumgsg7.fsf%40bae162.exu.ericsson.se&rn um=3



Thanks, just the info I was looking for!

I know I could have googled that myself, (and I may have, just not in
those terms), but my fingers were all googled out by the time I posted
the original message.

Thanks again!



--


DP Roberts

How do I exit from X into the shell?

Posted: 18 Jul 2004 05:23 PM PDT

["Followup-To:" header set to comp.os.linux.x.]
On 19 Jul 2004 12:09:44 -0700, Raqueeb Hassan staggered into the Black
Sun and said: 

....iff you started X using "startx". If xdm/gdm/kdm was started from
init, xdm/gdm/kdm will respawn after you kill X. "init 3" or
"/etc/init.d/xdm stop" is a better idea.

--
Matt G|There is no Darkness in Eternity/But only Light too dim for us to see
Brainbench MVP for Linux Admin / mail: TRAP + SPAN don't belong
http://www.brainbench.com / Hire me!
-----------------------------/ http://crow202.dyndns.org/~mhgraham/resume

Fedora download

Posted: 18 Jul 2004 11:05 AM PDT

Yes, netBSD is better should you are running low in bandwidth. You
might go to linuxiso.org and distrowatch.com for that comparison.

Ah, well, you might try slackware(no x-window) and gentoo, the fit 1
cd.

--
raqueeb hassan
congo (drc)

RedHat 9 setup related questions.

Posted: 18 Jul 2004 06:30 AM PDT

lokman <com> wrote: 
 

That is old information with regards both VNC and xdmcp.
The instructions are overly complex for VNc, and missing some steps for X.

RedHat 9 is more prepared for VNC, and more cautious about X.

---
Clarence A Dold - Hidden Valley (Lake County) CA USA 38.8-122.5

Starting faxgetty on startup

Posted: 17 Jul 2004 12:43 AM PDT


"Raqueeb Hassan" <com> wrote in message
news:google.com... 

Confirm this one. I used to be one of the HylaFAX maintainers, and this is
precisely how you do it in modern versions of Linux.

By the way, it's also very useful to use Kermit to test the state of the
modem and make sure it handles outgoing connections correctly, and to
examine the state of the modem registers.

Presentation Wizard in Project 2003 Microsoft Project

Presentation Wizard in Project 2003 Microsoft Project

Presentation Wizard in Project 2003

Posted: 16 Jul 2004 10:40 PM PDT

Thanks for the quick response.
 
Wizard" 
information as well - like 
use the creation 
message 

Document and Issues management 2002

Posted: 16 Jul 2004 09:46 AM PDT

This is a feature of using Project Server and Microsoft SharePoint --
packaged as one environment called Microsoft Enterprise Project
Management. I happen to think this way of handling project documents
and issues is quite good...powerful because of its simplicity and
enabling project teams to move beyond what I have called "silo project
management with paper and email".

A large amount of material about this product available on Microsoft's
web site. You use Microsoft Project Professional to connect the tool you
are familiar with to this "enterprise" environment.

Hope this is useful to you. Let us know.

rms




Barb Henderson wrote: 

MS EMP 2003

Posted: 16 Jul 2004 04:23 AM PDT

Brendan --

The Enterprise Global is a feature of Microsoft Project Server 2002 and
2003. The Enterprise Global is the "library" of your organization's
enterprise custom objects, such as custom Fields, Views, Tables, Filters,
Groups, Calendars, and the like. The Enterprise Global is also used to set
your organization's default currency for tracking project costs.

Each time a user logs into Microsoft Project Server through Microsoft
Project Professional, the system loads the user's personal Global.mpt file
and the Enterprise Global file, and then merges the two files into a single
Global file in the background. This gives the user access to his/her own
personal objects found in the Global.mpt and the organization's custom
enterprise objects found in the Enterprise Global file. When there is a
conflict between personal objects and enterprise objects that have the same
name, the enterprise objects always "win" and replace the local objects.

To access the Enterprise Global, complete the following steps:

1. Launch Microsoft Project Professional and log into Project Server with
administrator permissions
2. Click Tools - Enterprise Options - Open Enterprise Global
3. To customize enterprise fields and outline codes, click Tools -
Customize - Enterprise Fields
4. To customize the default currency, click Tools - Options - View and set
the Symbol value

Hope this helps.

--
Dale A. Howard [MVP]
Enterprise Project Trainer/Consultant
http://www.msprojectexperts.com
"We wrote the book on Project Server"


"Brendan Tuck" <microsoft.com> wrote in message
news:2d6b601c46b27$47796090$gbl... 

Non critical resource is holding up my progress

Posted: 15 Jul 2004 04:51 PM PDT

Amplifying a little on Jack's comment, generally speaking you should break
the tasks down to a level of granularity the reflects a 1 resource to 1 task
correspondence, "resource" here meaning what I think of as a package of
skills. That could be a single individual or it could be a team of
individuals but in any case the skills must work together in a cohesive
unit. If it is a team, they are working together and really can't work
separately because to do so would break up the skill package. If different
skills are required to design the page graphics versus program it, they
really are two different tasks.

--
Steve House [MVP]
MS Project Trainer/Consultant
Visit http://www.mvps.org/project/faqs.htm for the FAQs

"JeremyE" <microsoft.com> wrote in message
news:com... 
would be. 
I'd 
to 
graphics 
chugging 
the 
do. 
back 
we 
critical 
stuff 
getting 
just 
Subscribe to: Posts (Atom)