Pages

Search

Exch 2007 and Outlook cached not synching correctly - Microsoft Exchange

Exch 2007 and Outlook cached not synching correctly - Microsoft Exchange

Exch 2007 and Outlook cached not synching correctly

Posted: 17 Dec 2008 07:36 AM PST

I will try it and see! Thanks for the info. Sort of surprised this was not
found on a web search. Thanks again!

"Wayne Hollomby" wrote:
 

pop3 virtual server - does not start automatically

Posted: 16 Dec 2008 02:49 PM PST

Good point. I will install sp2 and other updates needed and se what happens.
Thanks for the tip.

"Lanwench [MVP - Exchange]" wrote:
 

Spam blocking help needed

Posted: 16 Dec 2008 11:09 AM PST

On Tue, 16 Dec 2008 13:09:49 -0600, "Clayton Sutton" <com>
wrote:
 

Most phishing mail doesn't depend on getting a reply through email.
They usually include a clickable link in the message that takes the
user to a compromised web site where the data are collected and,
sometimes, nice packeges of malware are deposited on the dupe's
machine. OTOH, lots of "419" mail depends on email replies (see
http://www.419eater.com).

The way to deal with this is to use a URIBL on inbound mail that
checks the domain names in the links against a database of known
spam/phishing/whatever domains. On the outbound side you want to
filter your outbound web traffic and prevent it from reaching the
compromiseds sites.
---
Rich Matheisen
MCSE+I, Exchange MVP

Third party spam filtering setup: SSL and other setup questions

Posted: 15 Dec 2008 02:06 PM PST

Thanks, I'll check this out and let you know how it works out.

Greg

"John Oliver, Jr. [MVP]" wrote:
 

Calendar time issue

Posted: 15 Dec 2008 10:52 AM PST

The odd behavior seems to only be on his WinXP (OL2003) and his Citrix
sessions (Win2003 Server). All the other users on this terminal server do
not have the same problem. I will investigate on his XP laptop. Would this
affect his Terminal Server sessions? If so, should it not also affect his
PDA and OWA sessions?


"Jon LaBarge" <net> wrote in message
news:phx.gbl... 

Outgoing mail filtering

Posted: 15 Dec 2008 06:14 AM PST

Mark <net> wrote: 

In the properties of your virtual SMTP server. However, note that this may
not be the source of your issue. You may just be getting spam.
 

Sender & recipient & connection will help the most. 

Synchronizing GMAIL Email hosting Services with Exchange Server

Posted: 14 Dec 2008 09:05 PM PST

S H A R I Q U E <microsoft.com> wrote: 

As the other reply states, this is not natively possible. I suggest you stop
using Gmail to host your domain's mail - use Exchange itself.

where are emails coming from

Posted: 12 Dec 2008 06:58 AM PST

I found it!! .. There *were* AD accounts forwarding to the holdingcell
account. These accounts that were configured to send email to holding cell
were user templates for employees in each OU. being that they were part of
email groups these template accounts mailboxes where growing and email never
deleted. So, on the user template accounts I forwarded email to the holding
cell account and ran mailbox maintence on the holding cell mailboxes to
delete anything in there over 14 days. Why not run it on the template
accounts, because i wanted the template accounts to be in the mailstore where
the new user's mailbox should reside and I do have a longer "delete anything
over" time period configured.

At any rate... thank you John for shoving me to look into message tracking.

"Dan" wrote:
 

How to move Outlook files?

Posted: 11 Dec 2008 02:12 PM PST

Grandad <co.uk> wrote: 

No need to do anrything w/OST files if you can still open the mail profile,
even offline - you just export directly to PST. 

Simple Exchange Mailserver?

Posted: 11 Dec 2008 11:04 AM PST

com wrote: 

Do you have SBS2003 handy? If you're an MSDN or action pack subscriber you
may have a copy. Perhaps not as nice / fully featured as SBS2008 but would
do the trick for you, I think. You could run it in a VM on your 2008
machine.

Disk Space Issues

Posted: 11 Dec 2008 08:16 AM PST

Excellent,

Thank you very much for your Reply and the information. I really do
appreciate it. I will go ahead and get rid of the log files and the tmp
files as well.

Jon


"Diane Poremsky [MVP]" <com> wrote in message
news:utersA%phx.gbl... 

Mail deleting on it's own.

Posted: 11 Dec 2008 07:24 AM PST

No pattern so far old, new and mail that was just never delivered, so we
thought. I now have a new symptom. One use so far who recieves email via our
own newsletter... The mail we no where to be found i went into the "recover
deleted item" on the tools menu. I found the "missing" mail and still I'm
unable to recover it. These messages were new, yesterday. I'm not sure if
this is an outlook issue - she's using outlook 2007 or an exchange issue.

"Transam388" wrote:
 

Outlook Web Access - single email sent multiple times

Posted: 11 Dec 2008 06:56 AM PST

thats the thing, she can, doesnt matter the machine or browser. So it has to
be something on her acct or some weird PBKAC issue. I was hoping someone
would have seen this before. lol



"Lanwench [MVP - Exchange]" wrote:
 

Move mailbox to new forest, new AD account

Posted: 11 Dec 2008 04:05 AM PST

Hi,

 

you could move him and rename or move and merge the accounts. I ´m not sure
whats the best solution for you, depends on how many users and how much
stuff you have to migrate and a few other things.
why do you want to migrate to another forest?

--
Viele Grüsse aus München

Walter Steinsdorfer
MVP Exchange Server
www.exusg.de
http://www.amazon.de/Exchange-Server-Outlook-Umstieg-Profis/dp/382732484X

Mailbox Permissions

Posted: 10 Dec 2008 01:19 PM PST

Thomas M. <com> wrote: 

Yep - many people have wished for that.

Exchange 5.5 migration to Exchange Server 2007

Posted: 09 Dec 2008 09:46 AM PST

Greetings,

I agree with Andy that your sales rep would be the best one to tell you what
you should do in terms of what to buy. However, you might consider this...
depending on the size of your organizaiton and the amount of preparation you
put into a smooth migration... if you can migrate quickly (go to 2003 and
then to 2007) then you could use evaluation 2003 and you wont have to worry
about paying for it.

You might also consider Quest Software for an easier move from 5.5 to 2007.
Then you don't have to use Exchange 2003 at all.
http://www.quest.com/exchange-migration-wizard/

Hope this helps.
J.Peter Bruzzese
(MCSE, MCT, MCITP: Messaging)
www.exclusivelyexchange.com


"Robin Olsen" <gov.sk.ca> wrote in message
news:com... 

Exchange 2003: Mirror Public folders with folder structure

Posted: 09 Dec 2008 08:26 AM PST

> 

Srsly? xD

Exchange crashes intermittently

Posted: 08 Dec 2008 11:02 AM PST

On Mon, 8 Dec 2008 19:29:21 +0000 (UTC), Jonas Andersson
<com> wrote:
 
Yeah, he did say that he'd checked with exbpa. Not sure this would be
Exchange bringing the box down though. You might be best served by
putting a case into MSFT. They'll go through the crash dump and work
their magic.

Hosting a mailbox on more than one Exchange server at the same time for "high-availability"

Posted: 08 Dec 2008 03:10 AM PST

Not with 2003.
2007 offers CCR which is clustering with two separate copies of the mailbox
store.

But don't forget, if it "must never be down", you are going to need
redundant power, internet, routers, switches, firewalls, probably an offsite
DR location.
Not that I would expect you to have that, but I think its always important
to set realistic expectations for bosses that make those kinds of
statements. :)


"Spin" <com> wrote in message
news:individual.net... 

2007 issue with OAB generation on a CCR cluster?

Posted: 06 Dec 2008 07:36 AM PST

Thanks. It seemed to be a 2008 issue, but I wasn't sure. It's sounds like
there's a couple of similar issues in an OAB/CCR environment, one related to
the 2008 share name and the other related to the share not being created
after a failover.


Before I brought 2007 into the mix, I consolidated our Exchange 2003 public
folder tion to two servers. Then after I set up the Ex 2007 CCR with
the public folder store, I did a "move all s" from the one Ex2003
server to the 2007 one.

Currently we have a single 2003 PF server that is ting with the 2007
CCR public folders. I know that's not supported except during migration,
that's why I want to get this taken care of.

At this point, if I set the OAB generation to be on the CCR cluster, tell it
to use PF distribution, and remove all the public folders on the 2003 server
(and delete the public folder store), all our clients should be able to pick
up the address book, correct? And since the only PF store would be the CCR,
I shouldn't have any public folder issues if an unexpected failover happens,
correct?

Will the Outlook 2007 clients get the OAB from the public folders, if
they're available, or do they only use the CAS server?

At a later time, if I do want to use the web distribution for the OAB, I
would just have to make sure that the OAB is copied from the CCR to the CAS,
correct? I would think I could just set up a scheduled task to take care
of that every couple of hours or so.

Mike O.

"Family" <com> wrote in message
news:com... 

SMTPSVC1 Log Files

Posted: 05 Dec 2008 01:46 PM PST

On Fri, 5 Dec 2008 14:35:04 -0800, "Martin Blackstone [MVP]"
<com> wrote:
 

Yea, we rolled our own, but they are out there.
 

Exchange 2007 and Outlook 2003

Posted: 05 Dec 2008 12:48 AM PST


"Mark Arnold [MVP]" <org> schrieb im Newsbeitrag
 

Hi Mark,

thanks for your answer!

Is there any way to determine who created a Public Folder in Exchange?

Posted: 03 Dec 2008 05:14 PM PST

and you...together...actually, the guy did get into trouble because he put
all kinds of stupid emails he had sent out where he was complaining about
his boss...the folder was there before I started here, and it was one of the
justifications I used with my boss to lock down the ability to create
top-level public folders...it worked...hahaha...

--
Susan Conkey [MVP]



"Andy David {MVP}" <com> wrote in message
news:com... 

Named properties reached its quota

Posted: 03 Dec 2008 10:15 AM PST

You could download a copy of mfcmapi.exe and dump the named properties
tables for the other stores. I don't know that there's a different method to
grab that information. (note that named properties is a per-database, not
per-storage group thing).

As Dave said, you need to move the mailboxes from Fourth Storage Group\HQ
Group1 to a new mailbox database quickly.

Missy

"Chandra" <microsoft.com> wrote in message
news:com... 

Microsoft Word - ERROR! displayed instead of nested formulae in Word-Office 365 under Win 8.1, why? how to avoid this "bug"?

Microsoft Word - ERROR! displayed instead of nested formulae in Word-Office 365 under Win 8.1, why? how to avoid this "bug"?

ERROR! displayed instead of nested formulae in Word-Office 365 under Win 8.1, why? how to avoid this "bug"?

Posted: 11 Mar 2015 03:35 PM PDT

Hi, 

Nobody knows how to let MS-WORD of Office 365 (Office 2013), that runs under Win 8.1, correctly display the "nested mathematical formulas" which I've previously typed in Word_Office 2010. All my formulas display "ERROR!" instead of all the nested formulas in the field codes.

I've three PC's (laptops). Only the most recent one of them has installed win 8.1 and installed Office 365 when bought 3 months ago, and it is that one that I use now in a "Physics" class room to teach this semester.

Before using it, I have had no problem with the display of nested formulas using the other two PC's who have Win 7.  I used to type the formulae during years myself using the field codes, through Ctrl+F9 and Alt+F9, without major problems.

Now, on the new laptop with Win 8.1, the display is full of ERROR! for the nested equations in the files I open in Win 8.1 under Office 365. However, when I type new nested formula it is displayed correctly (astonishing enough, no?). It is evident that I cannot re-type hundreds of my equations in particular for this machine.

I consulted every possible site, and I did not find any solution for that issue.

It seems related to Win 8.1 and or Office 365, someway. Am I wrong?


Your help is appreciated

Thanks.

Office Starter 2010 missing

Posted: 11 Mar 2015 03:33 PM PDT

Split from this thread.

I am now missing the whole Microsoft Office 10 Starter in my programs.

Any suggestions?    Thank you

microsoft word

Posted: 11 Mar 2015 12:28 PM PDT

I recently copied word documents off my old pc windows xp, and put them on my new pc which has word 2013. None of my documents will open. On my old pc I was using word 203. Can anyone help as I need these important docs.   Forgot to mention when I open documents with wor the page is blank.           

Microsoft Office 2013 will not open.

Posted: 11 Mar 2015 11:13 AM PDT

I am trying to open Microsoft office and I can not get any of the programs to open. I have even tried opening it from a saved document and it will not open. I get no error messages. I am using a ASUS Tablet PC.  I have Windows 8.1.  How do I fix this? 

Word documents won't open

Posted: 11 Mar 2015 10:43 AM PDT

I already had Microsoft Professional 2010 on my computer when I downloaded Office 2013.  I just recently uninstalled the 2010 version because my documents kept opening in that version instead of my 2013 version.  NOW, I can't open any documents unless I go into word and click open and click on the desktop and click on the file...It give me the message "this action is only valid for products that are currently installed" I DO have 2013 installed...Please HELP!!

word.docx is not an valid 32 application

Posted: 11 Mar 2015 10:42 AM PDT

Hello Everyone,

In my system, both ms office word 2010 and ms office word 2003 are installed. doc files are open default by office 2003. But, docx files are not open, Its shown the error message that was "FILEPATH/FILE NAME.docx/IS NOT AN VALID 32 APPLICATION".

As my project, i need both version of office. Basically, i,m using office 2003. But, some kind of document project i need advanced tool of word 2010. So, i keep in my system both office 2010 and office 2003.

How to change the default office open programs?

or

How to avoid this error message? "docx is not an valid 32 application"

Right now, i,m opening docx files indirectly to use like 1) open word 2003 and then 2) file->open -> select docx file

i'm not wiling to use above indirect method.

I not able to download template drom microsoft using surface RT first generation

Posted: 11 Mar 2015 10:17 AM PDT

it said something went wrong while downloading template

didnt specify what went wrong

any thing i can try ?

 

I am prompted when closing Word, something about saving global template or normal.dotm

Posted: 11 Mar 2015 10:08 AM PDT

I am prompted when closing my Word 2007, that there are problems with read-only something and something about the global template and normal.dotm.  I know i have seen what I think are corrupted files (they have a ~ before them) before. I saw something about changing files to read/write but I don't know how to do this.  I know this vague but I would greatly appreciate any help you can provide.  If the actual messages comes up again soon I will try to get it verbatim.  Thank you.

wits end with Word 365 -- fails to save or open files correctly

Posted: 11 Mar 2015 10:02 AM PDT

Ever since I've been using Word 365, I've been extremely frustrated. I've searched all over the boards, and I don't know what to do.

1.) Sometimes when I try to save a Word document, it tells me the pathname is too long. It takes me several different times (changing the name) to save it. This name could be as simple as "Training File" --- It is the quirkiest thing I've ever seen.

2.) If I successfully save a file, when I go to open it, it tells me the "Director name is not valid" or the pathname is too long!!??? What the heck? I have no way to open the document. After searching the board, people tell me to go to the winword /r to "reregister," but when I do this, NOTHING happens. Nothing.

3.) Some of my Word files automatically convert to PDF's --- FURIOUS.

Somebody please help me, because I have MAJOR work files that are being messed up. I'm at my wits end with Microsoft 365.

In advance, THANK YOU.

Cannot find my Microsoft Powerpoint 2007 application

Posted: 11 Mar 2015 09:43 AM PDT

I recently installed Microsoft Office but I cannot seem to find the application for Microsoft Powerpoint on the Start Menu or anywhere else after I deleted the desktop shortcut I created for it.

Does anyone know how to find it again or do I need to contact Microsoft to re-install Office?

Thanks

Darragh

Word 2013 Check Box Content Control not working in Word 2003

Posted: 11 Mar 2015 09:28 AM PDT

We have a 2013 Microsoft Office Word Enabled Document that we want to e-mail to clients to complete (it is a questionnaire) with Check Box Content Control to allow clients to put ticks in relevant boxes.

 

However if the clients use Microsoft Office 2003 the document will open but removed the Check Box Content Control.

 

So we are wanting to create a document that will work in any version of Office and allow the Check Box Content Control/User to click on a box and a tick appear, they save the document then e-mail it back to us.

 

It is not essential it is in Word.

 

Has anyone got any ideas?  Below is image of Questionnaire.

Word 2013 Windows 8.1 - Envelopes Stopped Printing

Posted: 11 Mar 2015 09:27 AM PDT

My envelpoes have stopped printing. They where working OK, then just stopped printin. The envelope goes through the printer, but are blank. All other print functions are working OK.

cross-referencing a paragraph number in a figure caption works in one part of my doc but not another

Posted: 11 Mar 2015 08:59 AM PDT

Hello,

I'm trying (in Word 2013) to be able to cross reference a figure caption (just Figure XXX) in the text -- the figure number I'm cross referencing also has a cross reference to the paragraph number. In one part of the document the procedure I show below worked. In another part of the document the procedure fails because the list of figures disappears for that figure

To create the cross references I followed these steps.

1. Click on the figure and select "Insert Caption" -- I get the pop up that says "Figure 4" and hit OK. At this point clicking in the doc and selecting Cross-reference shows Figure 4 in the list

2. Highlight the 4 in the newly added figure caption and select cross-reference, reference-type "Numbered-item", insert reference to "Paragraph number" (4.1 in this case. I also add a dash before the 4 by inserting it in the doc and closing out the popups) -- At this point the figure caption reads "Figure 4.1-4". Since this is the first figure in paragraph 4.1, I want the number after the dash to be 1.

3. Select the 4 and change it to 1. --  At this point the figure caption reads "Figure 4.1-1" as I want it to be. I now want to add a cross-reference in the text to this caption

4. Select "Cross-reference" (to figure) -- Now the list does not show Figure 4.1-1 or Figure 4.

I've tried a different procedure, that includes (when I create the figure caption) selecting "Numbering" and checking the "Include chapter number". When I do this I get as a caption "Figure 1-4". It looks like Word thinks the chapter number is "Chapter 1" and it didn't renumber the figures, starting at -1.

Any help is greatly appreciated

Jeff White

Error 0x404

Posted: 11 Mar 2015 08:41 AM PDT

Word/ Excel asks me to log in to my account every time I go into it, before it lets me do anything else. On some occasions it asks me to log in several times during one session!

Now, whenever I log into word or excel I get an error message pop up after I have been requested to log in to my account. The Error message says error: 0x404.

I can not then use either programme!

Table in Word 2013

Posted: 11 Mar 2015 08:22 AM PDT

I am a teacher of technology and I have been showing the students how to insert a table in Word 2013.  I then show them how to type and insert bullets in the cells.  I have not had this issue happen to me, but the students will have words that split and drop below as if the contents is not fitting in the cell correctly.  I have tried a variety of troubleshooting by selecting the table and selecting to auto fit contents, to changing the margins, to adjusting the bullet margins, and these have helped but it is time consuming.  I wanted to know what could they be doing at the start to get these errors and if there is an easier fix.  I finally walked them through creating a new table and copying the contents from the incorrect table over.  This did help and it copied correctly. 

Linking information from one Word document to another - version 2010

Posted: 11 Mar 2015 05:36 AM PDT

Hi

I'm trying to find out how to copy/autofill specific text from one file to another.

I have a job cover sheet with the job number, customer name and customer address - is there a way to link these to the estimate I send out so that when I open the estimate file the job number, customer name and customer address autofill over ?

I've been trawling the internet for an answer for over an hour now and getting very frustrated !!!!

Thanks for your help xx

Microsoft Office 2010 - Microsoft Server 2008 - will not print Tray 2

Posted: 11 Mar 2015 03:50 AM PDT

Hello all,

I am working from a computer at work, we log in to a server (Microsoft Server 2008 R2 Enterprise as above) and this runs Microsoft Office 2010

I can print from "Manual input Tray 1" and "Tray 1" but I cannot print from "Tray 2".


Please advise.

There is no option to Enable Macros in Word 2010

Posted: 10 Mar 2015 10:13 PM PDT

I suppose I should start with explaining that I've been developing in MS Office (primarily Access, Excel, Word, and Outlook) and writing my own VBA and VB code for at least 15 years.  So when I say I wrote my own code, I mean it.  I know that the code I wrote is safe to run on my own computer.  

But Word 2010 won't let me run my own code.  Every time I try to run my own code, I get a message that Macros are Disabled.  And it means it because I *never get the message bar* that is supposed to at least temporarily let me enable macros.  I'm not sure why I don't get the message bar, because I have the message bar enabled in the trust center.  So at the very least I should get that but I don't.

I've tried self-certifying my document, but all that accomplishes is protecting it further.  Once I edit my document I get the message that the certification is being removed due to the document being edited.  This is NOT what I want at all.  

I've tried adding all locations, including network locations, to trusted locations.  It helped once, but since that one time it stopped.  I don't know what magic I did that one time that it worked.

I have macros fully enabled in the Trust Center, despite M$ warning me that my own code is dangerous.

I'm at my wit's end.  I have exactly ONE document.  It's a .docm.  It contains the ONE MACRO that I want to run, that will save me a ton of keystrokes (joke's on me because it's taken 10x the number of keystrokes just to figure out how to enable macros).

How do I get my macro to run????????

Thanks in advance.

Office 2007 is opening Word files that Office 2013 should be opening

Posted: 10 Mar 2015 09:50 PM PDT

Hi,

I installed Office 365 almost a year ago on a Windows 7 64-bit operating system.

For months I had issues with Word 2013; these were stability issues, specifically when using tables and inserting photos, Word would often stop responding and crash. I also had problems with the "dialogue box open" message whenever I opened Word. In despair I reverted to using Word 2007, which had no stability issues, and both Office 2007 and 2013 are on my computer. More recently I ran a Fixit on Word and it seems to have resolved the stability and the dialogue box issues. I now wish to use Word 2013. However, it seems that the default has reset to Office 2007, and each time I try to open a Word document the MS Office Ultimate configuration process is triggered. This takes some time to load (90 seconds) and then the document opens in Word 2007.

Do I need to uninstall Office 2007 to correct this problem or is there another way?

Thanks in advance!

Ctrl+Alt+F5 hijacked from Word (Win 8.1)

Posted: 10 Mar 2015 09:34 PM PDT

I just noticed that a keyboard shortcut that I had added to a Word 2010 and a Word 2003 template was missing. When I tried to reinsert it using Customize the Ribbon > Keyboard the system would not recognize that key combination. It had no problem with Ctrl+Alt+F4 (or F6) but just did not like F5. I am wondering if some other program has hijacked that key combination. In the meantime, I will probably just change to one that can be used.

I have Snagit, but none of its keyboard shortcuts are to F5 variants.

Word will not do anything

Posted: 10 Mar 2015 06:10 PM PDT

I open Word 2007 and I get Word could not create the work file. Check the temp environment variable. I have gone through the suggested fix and it is set that way, still not working. I go to insert a pic and I get An error occurred while importing this file. I also had a look and it seems that Content.Word file is corrupted. Could this be the cause, and if so how do i fix this? I use word for everything, and Im trying to write up a proposal

Seeking Report Template

Posted: 10 Mar 2015 05:13 PM PDT

I have searched through the MS Templates available up to Word 2013 but I cannot find a template for a formal business report.

Such template would have to use the LEGAL heading numbering format.  Apart from that, the less frilly the better.

I have written my own - and that's fine - but the people on my team with less facility with Word need something to use and I don't want it obvious that they get everything from me.

Does MS have such a template, and if so where do I find it?

Thanks

How do I install Chinese and Vietnamese fonts in Office 2010?

Posted: 10 Mar 2015 04:50 PM PDT

Hello,

I need to install Chinese (Taiwanese) and Vietnamese fonts on a PC. I have tried language packs but this is not what the person wanted. Language packs change the entire Windows system to a foreign language. I simply want to keep English but have the capability to install  alternate language fonts. I would also rather not go to a web site other than Microsoft to avoid malware.

Thanks,

Dan

How to make a document always open in print layout showing all markup?

Posted: 10 Mar 2015 04:34 PM PDT

We heavily rely on the track changes feature of Word. Since we've switched to office 2013, there have been two problems with track changes. (1) The default setting for displaying tracked changes is for "Simple Markup" (Which doesn't indicate what changes have been made!) instead of "All Markup", and (2) When you open a Word document from Outlook, it opens in "Read Mode" (which also hides tracked changes!) by default, instead of "Print Layout".

Obviously, I can easily switch over to "Print Layout" and "All Markup" on my computer when someone sends me a document with tracked changes.  The problem I'm having is that when I send a document to other people with tracked changes, they don't see them because the changes are hidden on their computers by default!  Is there a way I can save the display options (print layout and all markup) to a file so that when that file is opened on any computer it will display as desired?

Windows XP Pro Office files seemed to changed file types to "EDPMYJJ" without any known help by me?

Posted: 10 Mar 2015 04:14 PM PDT

The identifying thumbnail has also changed.

Change to default .doc to create word file

Posted: 10 Mar 2015 03:49 PM PDT

I very often create a MS Word Document in folder windows by right clicking > New > Microsoft Word Document.  This action creates a MS Word Document in the folder in .docx format.  I always save in .doc format.  I have to use "Save As" to do this.  I want to set default creation of Microsoft Word Document to .doc format and not .docx format.  How do I do that?

Thank you for your help.

 

I have MS office professional Plus 2010.

I have a i7 haswell midtower, 15GB memory, 2TB HD & Windows 8 Pro.

Office 2013 Word no internet connection , but internet is working well , on Windows 7 64, on microsft domain server, automatic proxy , cant connect my account, cant sync with onedrive or skydrive

Posted: 10 Mar 2015 03:42 PM PDT

Office 2013 Word keep saying no internet connection as well as one note, but internet is working well , on Windows 7 64, on microsoft domain network,  automatic proxy , cant connect my account, cant sync with onedrive or skydrive

OFFICE Home & Student License Keys - Microsoft Office forums

OFFICE Home & Student License Keys - Microsoft Office forums

OFFICE Home & Student License Keys

Posted: 24 Nov 2008 12:28 PM PST


"DBurton" <microsoft.com> wrote in message
news:com... 

The appropriate portions of the EULA for H & S 2007 is duplicated below.
Items in parentheses are my comments.

14. REASSIGN TO ANOTHER DEVICE. You may reassign the license to a
different device any number of times, but not more than one time every 90
days (basically this means transfer from computer to computer). If you
reassign, that other device becomes the "licensed device." If you retire
the licensed device due to hardware failure, you may reassign the license
sooner. (This section really doesn't apply to a sale.)

15. TRANSFER TO A THIRD PARTY. The first user of the software may make a
one-time transfer of the software, and this agreement, directly to a third
party. The first user (you) must uninstall the software before transferring
it separately from the device. The first user may not retain any copies
(disks or paperwork). Before any permitted transfer, the other party must
agree that this agreement applies to the transfer and use of the software.
The transfer must include the proof of license (the Certificate of Authority
which has the key for the software).



Just make sure that all software has been uninstalled and sell away.

Where is MS Query

Posted: 24 Nov 2008 09:50 AM PST

I was asking what web page I download it if it needed to be downloaded or
what folder it is on my system.

I eventually found in in the program files directory.

Thanks anyway.




"JoAnn Paules" wrote:
 

Office 2007 Trial causing problems?

Posted: 24 Nov 2008 09:44 AM PST

Thanx that helps.

I was getting fustrated because I couldn't uninstall it via the programs
section.

"DL" wrote:
 

03 Office Pro Install Problems

Posted: 23 Nov 2008 09:16 PM PST

But what does it say for version?

"TC" <microsoft.com> wrote in message
news:com... 

HOW to remove MSOffice 2003 ???

Posted: 22 Nov 2008 01:57 PM PST


"macropod" <invalid> schreef in bericht
news:phx.gbl... 
remove certain folders? This usually indicates you've got 
should remove all the files that Word/Office installed.

During uninstalling I did not get any error messages. Nor had I put other
files of my own there.
In the meantime I've done some searching on the web and noticed that I'm not
exactly the only one with this problem. But as life goes on and I'm out of
time, I deleted the the map C:\Program Files\Microsoft Office\
and all submaps and contents. Then I used Registry Mechanic to clean up all
Office junk and all seems well now :-))



--
regards,

|\ /|
| \/ |@rk
\../
\/os

Help One Note Product Code not recognized

Posted: 22 Nov 2008 10:26 AM PST

Virtual CD-ROM? How does one install a program on a real disk with a virtual
drive? (I'm being quite serious. I don't understand why people even consider
that lack of hardware.)

--

JoAnn Paules
MVP Microsoft [Publisher]
Tech Editor for "Microsoft Publisher 2007 For Dummies"



"WillS" <microsoft.com> wrote in message
news:com... 

Should I remove all versions of works before installing office 200

Posted: 22 Nov 2008 09:16 AM PST


"Malibu Gwen" <Malibu microsoft.com> wrote in message
news:com... 

It is not necessary to remove Works, either version (one with Word, called a
suite, and one without.) If the installation requests to update Office
product, you can allow it to update the Word version installed and it will
change the suite Word version xx to Office '07s version. You, in fact may
need a program in Works installed if you have created any files from within
the programs installed.

You should uninstall any trial version of Office and reboot the computer
that may have been installed before installation of Office '07 however.

Office 2007 trial killed Word 2003

Posted: 20 Nov 2008 11:15 AM PST

If the trial was installed as an upgrade, you will have to reinstall Word
2003.

--

JoAnn Paules
MVP Microsoft [Publisher]
Tech Editor for "Microsoft Publisher 2007 For Dummies"


"M Skabialka" <com> wrote in message
news:phx.gbl... 

Product Key not working on Vista Laptop

Posted: 19 Nov 2008 03:19 AM PST

Generaly reg cleaners are snake oil and can do more damage than they fix
There is an MS KB Article on manual removal of Office 2007
http://support.microsoft.com/kb/928218/en-us
You might want to check through this for any remnents remaining on your
system.

http://support.microsoft.com/kb/924619 may also be relevent (note free
support for installation problems section)


"hilly1609" <co.uk> wrote in message
news:com... 

MS Office 2007 Configures at Every Launch

Posted: 18 Nov 2008 06:34 PM PST

I have Office 2007 Enterprise on my Vista notebook.

I installed Frontpage 2003. Right after that, all of my office progs started
"configuring" whenever I start the program - Outlook, Excel, Word, even FP
2003.

I uninstalled FP 2003 and it still did this.

I used the program you linked to, and now Outlook 2007 opens normally, but
the other Office programs still "configures" whenever I open them.

Please help!

TIA

"Peter Foldes" wrote:
 

Office 2007 Pro will not install: Error installing

Posted: 18 Nov 2008 12:50 PM PST

OKAY ALL YOU HAVING THIS ISSUE, HERE IS THE ONLY WAY I FOUND THAT WORKS.
You have to uninstall Office 2007 prosessional by yourself in pieces. MS has
a link to do this, too bad the programmers didn't do it for us.
http://support.microsoft.com/default.aspx/kb/928218


"Flysortie" wrote:
 

problem entering product key for Office

Posted: 16 Nov 2008 12:31 PM PST


"DavidB" <microsoft.com> wrote in message
news:com... 

Glad you got it working.

Can't uninstall Home and Student 2007 nor activate

Posted: 16 Nov 2008 08:11 AM PST

Thanks. I thought I could just activate the trial, but I was unable to. I
found the page you referred me to after I posted my question.

Microsoft Office Word has not been installed for the current user.

Posted: 13 Nov 2008 08:55 AM PST

Hey,

Follow this procedure.. helped me for office 2k3 !

You receive a "Microsoft <Program_name> has not been installed for the
current user" error message when you try to start an Office 2003 program or
an Office XP program for the first time

you receive the following error message:
Microsoft Program_name has not been installed for the current user. Please
run setup to install the application.



RESOLUTIONTo resolve this problem, follow these steps: Log on to the
computer by using an...To resolve this problem, follow these steps:
Log on to the computer by using an Administrator user account.
Start Microsoft Windows Explorer.
On the Tools menu, click Folder Options.
Click the View tab.
Under Hidden files and folders, click Show hidden files and folders.
Click to clear the Hide extensions for known file types check box, and then
click OK.
Open the following folder:
C:\Doents and Settings\All Users\Application Data\Microsoft\Office\Data\
If you are running Office 2003, right-click Opa11.dat, and then click
Properties. If you are running Office XP, right-click Data.dat, and then
click Properties.
Click the Security tab.
Click Advanced.
Click the Permissions tab.
Click to select Everyone in the Permission entries list, and then click Edit.
Click to select the Full Control check box.
Click OK three times.
If these steps do not resolve this issue, delete the Opa11.dat file or the
Data.dat file from the following folder, and then restart an Office 2003
program or an Office XP program
C:\Doents and Settings\All Users\Application Data\Microsoft\Office\Data


Gud Luck !
Abdul Muneem Khan

"CR Geissler" wrote:
 

Office 2007 Startup

Posted: 13 Nov 2008 07:10 AM PST

Thanks, Scott! This is perfect.

"Scott2008" wrote:
 

Microsoft Office 2007

Posted: 13 Nov 2008 06:46 AM PST

thanks DL. I wanted to double check this before I reinstalled, so i didn't
use an extra license. thanks for your help.

"DL" wrote:
 

my product key does not work?

Posted: 12 Nov 2008 07:59 AM PST



"emalina" <microsoft.com> wrote in message
news:com... 

Where exactly are you getting the product key from? It should be on a
sticker on the case that the Publisher CD/DVD came in, on the email that you
received when you purchased and downloaded Publisher or on a Certificate of
Authenticity received when you got the product. It is NOT the key on the
bottom or back of the computer.

Can the Office Customer Experience popup be disabled

Posted: 12 Nov 2008 06:03 AM PST

hi Andy,

What version of Office? I'm assuming you're using a volume license edition and key?

============
<<"AndyR" <microsoft.com> wrote in message news:com...
Can the Office Customer Experience popup be disabled through the use of a
custom MST file? I do not see where this option is listed in the msi,
further more the bigest problem is that everytime a new user profile is
created this comes up.
I have checked the "active setup" in the registry and can not locate
anything pointing to this option.
Can any one lend a hand on this?
Thanks>>
--

Bob Buckland ?:-)
MS Office System Products MVP

*Courtesy is not expensive and can pay big dividends*

Corrupt or not available files in office 2007 set up

Posted: 12 Nov 2008 05:28 AM PST

Sorry--what and where can I find the event viewer?
--
Adelphia


"Peter Foldes" wrote:
 

Office 2k7 pro plus install fails

Posted: 11 Nov 2008 11:33 AM PST

Hi Peter,
Purchased from Ingram Micro, has the hologram intact, office 2007 pro plus
vlk.
I even took the machine completely off the domain yesterday and tried to
install with the same results.. Driving me nuto !!!!!

"Peter Foldes" wrote:
 

Error 1907 while installing Office 2007 on Vista

Posted: 11 Nov 2008 10:42 AM PST

Peter,

thanks for your answer. But as I wrote in my first post:
- I'm logged in as administrator
- I've started the setup.exe of MS Office 2007 with "Run as administrator".

So I think from the privileges point of view that's all I can do.

Your hint with "font is invalid or not supported" maybe is true, but I
cannot avoid this as I use an Original MS Office 2007 installation CD. So how
can I avoid an invalid font if it comes with the orginal installation files?
Also the title comes with the original CD.

I will try to run "sfc /scannow" but the problem is that the sfc.exe is not
available on my Vista Home environment. Don't know why but have to search for
it in other forums.

Do you have any other hint?
I'm really disappointed that the newest Office does not work on the newest
operating system of MS...


"Peter Foldes" wrote:
 

Not been installed for current user

Posted: 10 Nov 2008 01:33 PM PST

MarkC, you must have skipped the part in each .exe to click the compatibility
tab and put a check mark in the "Run as administrator" box.

"MarkC" wrote:
 

Chart of 2003 > 2007 menus

Posted: 09 Nov 2008 03:23 PM PST

Hi Jim,

You may find one or more of these Microsoft resources to be helpful.

http://office.microsoft.com/en-us/training/HA102295841033.aspx

http://officelabs.com/projects/searchcommands/Pages/default.aspx

=========
<<"Wickiup" <com> wrote in message news:%phx.gbl...
Hi JoAnn
Does this "list" have a search term that will find it?

Thanks

-*-
Jim Cur <<

--

Bob Buckland ?:-)
MS Office System Products MVP

*Courtesy is not expensive and can pay big dividends*

Will Office 2003 Pro run on Vista

Posted: 09 Nov 2008 09:57 AM PST

Past_it wrote: 
Thanks so much for the prompt replies. You folks are the best.
Mike

Microsoft Office2000 Professional

Posted: 08 Nov 2008 04:27 PM PST

You can check here if you registered your product correctly. You will need exactly the answers that you gave as info or otherwise you will get nothing

https://eopen.microsoft.com/EN/default.asp
--
Peter

Please Reply to Newsgroup for the benefit of others
Requests for assistance by email can not and will not be acknowledged.

"gbmtecm" <microsoft.com> wrote in message news:com... 

Show/All Subtasks - except recurring tasks? Microsoft Project

Show/All Subtasks - except recurring tasks? Microsoft Project

Show/All Subtasks - except recurring tasks?

Posted: 24 Feb 2006 08:43 AM PST

Thanks again. I've never used filters, but I guess now is a good time to
learn!

Pat


"JulieS" <microsoft.com> wrote in message
news:com... 

Calculating Workdays in an Interval

Posted: 24 Feb 2006 05:44 AM PST

Thank you. That takes care of it.
- Will

"Jan De Messemaeker" wrote:
 

Odd Start Date

Posted: 23 Feb 2006 03:04 PM PST

In article <com>,
"tschock" <microsoft.com> wrote:
 
Todd,
OK, let's review your file structure a bit. You said you have 5 projects
consolidated. First, what version of Project are you using? By 5
consolidated projects do you mean that you have a master file with the 5
subproject inserted or something else? If it is something else, exactly
what do you have? If it is indeed a consolidated master, is it a dynamic
master or static master?

Also, do the tasks that start on 9/25 perhaps have a resource assignmed
that isn't available until that date?

John
Project MVP 

how do you change 'hours' to 'days' in the "work" field?

Posted: 23 Feb 2006 12:59 PM PST

However, note that costs are always calculated on an hourly basis,
regardless of the units used to display work or the way the standard rate is
entered. If I have a resource whose rate is entered as "$100/day" and I
assign him to a task that runs from 9am to 11am on Monday, if the "Work"
field is formatted to show days it will display "0.25 day" and the cost will
show $25.00. It's up to you to figure out something else for him to do that
day as well in order to get your money's worth of the full $100 you have to
pay him to show up at all and if you don't include that other work in the
project, Project won't count the additional $75 in the cost.


--
Steve House [MVP]
MS Project Trainer & Consultant
Visit http://www.mvps.org/project/faqs.htm for the FAQs


"Deanna" <microsoft.com> wrote in message
news:com... 

Problem saving Resource Pool changes

Posted: 23 Feb 2006 12:53 PM PST

I'm using Project 2002 Pro. Sorry, I should have mentioned that.
Do you know if there was a fix for this version as well?

Pat


"JulieS" <microsoft.com> wrote in message
news:com... 

Network diagram?

Posted: 23 Feb 2006 12:48 PM PST

thanks again

"Catfish Hunter" wrote:
 

Is it possible to set new tasks to a specific date

Posted: 23 Feb 2006 11:59 AM PST

Go to Tools>Options>Schedule. Here you have 2 options to have new task start
on. Good Luck!

"la0d0g" wrote:
 

network diagram header

Posted: 23 Feb 2006 10:10 AM PST

There are no scheduling programs I know of that will put a time scale on a
pure logic diagram. You might look at View>Calendar. This will not show logic
ties but has dates.

"KP77" wrote:
 

reference a task from another project not as a predecessor

Posted: 23 Feb 2006 09:43 AM PST

In article <com>,
MichelleM <microsoft.com> wrote:
 

MichelleM,
Sure, you can always create a separate "CEO's" version by just listing
the big milestones in a short Project file and not tie it to anything,
but it probably isn't going to be what you want.

I would assume you want the top level report or view to be dynamic, that
is, automatically track with the detail plan. One fairly easy way to do
that is to create a top level filter that only displays the major
milestones. If for some reason that just won't do, then you could also
create a separate top level file as above but externally link the top
level file to the actual tasks or milestones in the detail plan(s). But
either way you look at it, it you want a dynamic top level overview some
type of links will be necessary.

John
Project MVP

How do you delete a password?

Posted: 23 Feb 2006 05:27 AM PST

Hi Gitmo,

I am sorry, perhaps I wasn't clear enough. You must open the Project file
by entering the original password first. Then to remove you'll Save As> then
delete the **** that appears and re-save the file.

I hope this helps.
Julie

"Gitmo" wrote:
 

File custom properties

Posted: 23 Feb 2006 12:28 AM PST

You can't link it to a particular "cell" because Project is not cell based.
Cells are a display artifact only. Data still exists even if the cell is not
there.
You can link to various bits of project data.
Go to file menu, select properties,
go to custom tab
check the "link to content" box and then select the source in the source
box.

-Jack Dahlgren



"Chris" <microsoft.com> wrote in message
news:com... 

Negative Lag (Lead Time) in Schedules

Posted: 22 Feb 2006 10:32 AM PST

What do you mean by "without breaking date confines?" Links, including
links with lag and lead times, calculate the start or end dates of successor
tasks, the "controlled" tasks, based on the start or end of the predecessor
or "controlling" tasks. The link type and lag/lead times establish the
rules for that calculation. If you change the rules, you'll change the
calculation results. I get the feeling you've taken the advice to let
Project calculate the task's dates for you but then when it didn't come up
with the results you thought it should, you put in links, leads, and lags to
make it "fudge" the schedule into some pre-determined idea of what the
schedule is supposed to be. Don't do that.

Lags and leads are valuable tools when they describe the true nature of the
work and the task relationships - for example, if I'm moving offices I have
to pack up the furnishings before before I can load them on the truck. But
I don't have to do all the packing before I start loading - after the first
few boxes are done I canh have the loaders put them on the truck while the
packers continue packing. Lead times model such an overlap perfectly.

If the free calculated schedule doesn't hit the deadlines you're required to
meet, don't just throw in lags, leads, or constraints to fudge it into doing
so. Odds are the schedule that results will prove unworkable when you
actually go and try to do it. Instead you need to look for real,
controllable parameters you can change. A task taking too long to meet it's
deadline? Don't just put lead time into the link from its predecessor to
force it to start earlier - odds are it won't be able to no matter what your
schedule says. Instead put more resources on the task to get in done in a
shorter period of time.

HTH
--
Steve House [MVP]
MS Project Trainer & Consultant
Visit http://www.mvps.org/project/faqs.htm for the FAQs


"CraigB" <microsoft.com> wrote in message
news:com... 
Subscribe to: Posts (Atom)