Pages

Search

Microsoft Word - Emailing word documents connected by hyperlinks...

Microsoft Word - Emailing word documents connected by hyperlinks...

Emailing word documents connected by hyperlinks...

Posted: 17 Nov 2014 02:08 PM PST

Hi everyone,

Thanks in advance for any assistance anyone can give me. I have created a pretty complex set of instructions, starting with an 'Overview' document that hyperlinks to about 8-9 other documents. I can put all these doc's in a file (compressed) and send it to whomever, but when it get's there, the hyperlinks are dead.

How can I email this entire file with all the hyperlinks intact?

Thank you!

Winrland

Text box that will repeat in the same position on each page of a multipage document

Posted: 17 Nov 2014 01:37 PM PST

I am trying to create a text box that will repeat in the same position on each page of a multipage document. Basically I want to place my name and address on the lower left hand side of each page. The text box will be located outside of the margins of the page but in the printable area. I can not figure how to do it. If there is another way to do this other than a text box i would appreciate the help.

Rightclick Autocorrect in Word 2013

Posted: 17 Nov 2014 12:50 PM PST

OK, reality check.

If Microsoft is claiming that those of us who prefer previous versions of Office are dinosaurs, then how come their development team is going backwards to pre-historic errors and functionality with their latest (and by far the worst) version of Word - Word 2013?

One of the most beneficial and frequently used features of their previous Word versions was the right-click Autocorrect function, which many of us (if not all of us, if we think of the executive ranks), used multiple times per day.

now, we have two options - keep a running handwritten list of needed auto correct entries and hand to our secretary to enter at the end of the day - about a page or so per day - or, interrupt any valuable work to go through multiple irrational layers of menus to reach the box where entries can be made and retye all of them one by one...  as in the stone age.

What a perplexingly stupid thing to remove - is there anything we can do to bring this valuable feature back on our laptops?

Updated to WORD 2013 and lost half of tracked changes

Posted: 17 Nov 2014 12:30 PM PST

I was editing an 82-page document and tracking changes successfully.  While I was away with the document still up, the computer guys came in and updated my system and I'm now working with 2013.  Now the document only shows half of my changes!?  I spent over 10 hours on it! 

I'm going to assume I saved the document before I left, and that the computer guys would've done the same before shutting down.  Could there be any other explanation for not being able to see the changes?  Are there any tricks I can try?  A way to recover the document from it's last state?  Anything?!  I've got "All Markups" selected and don't even see those changes in the left "Revisions" pane.

Thanks,

 

Word 2013 replaced Word 2010 on my computer

Posted: 17 Nov 2014 11:27 AM PST

Split from this thread.

This morning, Microsoft installed WORD 2013 into my computer. In doing so, they also uninstalled

WORD 2010 which was in the computer. Now I cannot access either my documents or e-mail attachments. When I try, a box appears saying:"Click-2-Run Virtualization Handler". How can I correct this so that I can again access my documents and e-mail attachments? Thanks for your help.

D. Gorman

*** Email address is removed for privacy ***

Microsoft Directory Merge issues

Posted: 17 Nov 2014 11:17 AM PST

Doing a directory merge using a table I created in Word.   Three columns across (landscape)  several sections down.  I am bringing this in from a existing document in Excel. (columns are the different program passwords and rows are each student.

When I enter the criteria the first one comes out perfect, but it post the same information in the next two columns instead of moving to row 2 for column 2 and so on.   I am enclosing a copy of the document I am working with as a sample.  I am hoping there is a solution that I am just not seeing or able to locate .  Thanks, Jodi

This is what I am entering and this is what I am getting after the merge:

Same student all across, when I would like it to pull from the next row(2,3,4 etc... in excel)?  Can anyone help Please!

Word can't open template

Posted: 17 Nov 2014 11:09 AM PST

Split from this thread.

Hello,

I have been working on a Word document generated from a template (ftp://ftp.springer.de/pub/tex/latex/llncs/word/splnproc1110.zip) for a few months, and I keep both the document and its template on OneDrive. For about a week now, when I try to open the document, Word gets stuck at the splash screen trying to open the template, and I have to force-close it. Opening the file in the Safe Mode works, but I don't get the toolbars that the template provides. I appreciate any help with this.

Thank you!

Why is Word ignoring Read-Only file attribute?

Posted: 17 Nov 2014 11:07 AM PST

I can use Windows File Explorer to enable "Read Only" on a Word document stored on my OneDrive, then open the document in Word, change it and save it.  The original read-only file has now been modified.  What I'm I missing here?

Editing is in English United States - not UK

Posted: 17 Nov 2014 11:07 AM PST

Editing is currently in United States English rather than English UK.

Going to Languages tab in Control Panel English UK is not given as an option.

Any suggestions?

PLEASE HELP!!!!! Word 2010, "paste destination" button/option missing, undable to apply style gallery and have it work

Posted: 17 Nov 2014 10:08 AM PST

Hello, can someone PLEASE tell  me how to "paste with "DESTINATION" formatting" in word 2010.  The only options are "keep source, merge formatting, and "keep text only."  I have searched all over the internet and this site and I cannot find any help.  I send documents from person to person and they come back to me all goobed up!!  With office 2007, I never had a problem as I was able to apply my own style gallery to fix the formatting, however... with 2010, this is "gone," and I am at a TOTAL loss of how to copy/paste with "destination" formatting.  
I have seen instructions for "macros," but I am not familiar with macros at all, so those directions have been "totally useless!"  I AM SOOOO FRUSTRATED THAT MS OFFICE WOULD 'REMOVE' THE DESTINATION FORMATTING OPTION,' for what reason I have nooo idea.  
I hope someone can help me and if possible (provide screen shots).  I am NOT a programmer, so I do not understand macros, and/or changing something like my "add in.com settings"
I simply want to "copy/paste" with "destination formatting" AND.... be able to set a particular style gallery and then "apply it to a document."  Again... this is NOT working properly in word 2010.  
PLEASE... CAN SOMEONE HELP ME!!!!
Thank You in advance.

Word Macro Opens Multiple Instances

Posted: 17 Nov 2014 09:30 AM PST

I was expecting worse given that I've been dragging some of these macros around since 95 :)

My macro opens a different instance of Word whenever it hits this:

WordBasic.FileOpen Name:="c:\windows\winword\merge\" + FilName$, ReadOnly:=0, PasswordDoc:="", PasswordDot:=""

FirstWin$ = WordBasic.[WindowName$]()      'get the title of the current window

I want to stay within a single instance of Word. How is that done?

TIA for any help.

Office professional 2000, word

Posted: 17 Nov 2014 09:07 AM PST

Related to: Community Moderator List - Windows

I am using Windows xp, Office 2000 professional.  I recently copied the body of an email into Word, and now every time I open Office, that document appears instead of a blank page.

How do I delete that page?

Thanks

Word document not printing

Posted: 17 Nov 2014 07:21 AM PST

Posted twice in error.

Word has run into an error that is preventing it from working correctly

Posted: 17 Nov 2014 07:09 AM PST

I'm trying to open Microsoft Word and I'm getting the following error message:

We're sorry, but Word has run into an error that is preventing it from working correctly. Word will need to be closed as a result.

Would you like us to repair now?

I tried to repair multiple times. I ran the trouble shooter and tried all options. I'm still getting the same message. Any ideas to get Word to work?

Word document not printing

Posted: 17 Nov 2014 07:04 AM PST

A word 2010 document will not print, other documents print with no issue. What makes the document different is it has an email address in the footer.

I open up the document go to File > Print - a small window opens displaying Microsoft Word in the title bar, Sender's email with the email address in the window. You have the option to select OK or Cancel, but the cursors is displaying the busy orb.

If necessary I can post the document.

Word TOC column

Posted: 17 Nov 2014 06:59 AM PST

When I convert a TOC from 1 column to 2 columns, the page numbers are now shown.  How do I fix it?

Convert document properties to text?

Posted: 17 Nov 2014 05:50 AM PST

Is it possible to convert document property values to plain text?  I need to create a macro to select all doc properties in the document & convert them to plain text and can't figure out a way to do that (it doesn't convert when I treat it like a field & use Alt-A (to select all) followed by Ctrl-Shift-F9 (to convert field to text). 

Thank you for you help!

MS Office items pinned to taskbar icons don't work?

Posted: 17 Nov 2014 03:44 AM PST

I can pin files to the Word and Excel icons on the taskbar, but when I right-click on either of the icons and then click on a pinned file, the spinning circle appears for a few seconds, and then nothing else happens.  It is the same for "Recent" files that appear when the icons are right-clicked.  Other taskbar icons, like File Explorer and IE seem to work ok. 

Unable to Insert a Chart into Word/Powerpoint

Posted: 17 Nov 2014 03:30 AM PST

I was trying to insert a chart in Word and when I select the chart type and click OK it just asks me to select the chart type over an over.  I also tested it in Power Point with the same result.  I get no error messages of any kind, it just places me in a loop unless I cancel out.

I tried to repair the installation, and when that didn't work, I uninstalled and re-installed Office.  I'm at a loss of what else I might be able to try and fix this or work around it.

Exit custom bullet list style problem

Posted: 17 Nov 2014 02:30 AM PST

Hello everyone,

I have created a custom bullet list style for a company wide used normal.dotm which uses different indentions and colors than the standard in word.
Basically I designed a style like described here: http://shaunakelly.com/word/bullets/controlbullets20072010.html
(actually I changed the "List Bullet Styles" and added the first level to the Quick Style Gallery)

Everything works fine so far beside for one problem:

The standard bullet list of word can be easily exited with pressing return twice or deleting the last bullet point. If doing so Word automatically changes the style of the next line to "Normal" style and begins a new paragraph.

With our own bullet style this does not happen. When pressing return twice, while being in the list, Word at first look seems to behave the same: it removes the bullet list and set the cursor to the beginning of the new line. BUT it does not change the style of the new line to Standard but instead keeps the List Bullet Style active. This happens for every new line and paragraph. The custom style stays active but is just not painting the bullet points any more.

Of course its possible to change the style in the new line manually to "Normal" again. Our fear is though that most users will just not do this and not even be aware of the problem.

So the question is: Is there any way (VBA included) to make Word behave like with its own bullet points, even we use our custom designed style?

Thank you very much in advance already!
Thomas

PS: just for completeness: I have also used VBA to handle the FormatBulletDefault event when the bullet point button is pressed, but this seems not to affect the previous described problem.

Line Randomize in MS Word

Posted: 16 Nov 2014 10:48 PM PST

Dear Expert,

Suppose,

here 4 lines written in ms word that represent a set of question.

1. AAAAAAAAAAAAAAAAAAAAA

(a) Love (b) Hate (c) mutual (d) live

2.BBBBBBBBBBBBBBBBBBBBBBBB

(a) play (b) sky (c) milk (d)world

3.CCCCCCCCCCCCCCCCCCCCCCCC

(a) Mars (b) Apple (c) Game (d)Hot

4. EEEEEEEEEEEEEEEEEEEEEEEEEEEE

(a)Cat (b) Cow (c) Tiger (d) Home

(please tell me the short cut way or any logical treatment)

I want make more set of question within the same data/information. I mean the number of questions  will be randomized in a single click with data they held.

like:

 

2.BBBBBBBBBBBBBBBBBBBBBBBB

(a) play (b) sky (c) milk (d)world

3.CCCCCCCCCCCCCCCCCCCCCCCC

(a) Mars (b) Apple (c) Game (d)Hot

1. AAAAAAAAAAAAAAAAAAAAA

(a) Love (b) Hate (c) mutual (d) live

4. EEEEEEEEEEEEEEEEEEEEEEEEEEEE

(a)Cat (b) Cow (c) Tiger (d) Home

thanks in advance

corrupted new document template

Posted: 16 Nov 2014 10:19 PM PST

I'm using Word 2010.  When I open a blank document, there are no top or bottom margins.  I am unable to click and drag the margins on the ruler and when I open the page layout dialogue box it shows that the margins are the normal default.  How do I fix this?

Calibri has Serifs

Posted: 16 Nov 2014 10:07 PM PST

Hello,

I recently installed Office 365 on my computer, and it has come to my attention that the Calibri font is not showing up as it should. The Calibri that shows up on my computer has serifs, and is most likely using a different font in place of the actual Calibri font. 

Does this mean that Calibri somehow didn't install properly? The proper font shows up on other Office products on my computer, as well as Word 2013 on my laptop.

Running Office 2013 under application verifier

Posted: 16 Nov 2014 08:54 PM PST

As a security measure, I run many programs under Application Verifier. As exploits, by definition, rely on bugs, my intention is that Application Verifier will force the program to crash long before successful RCE begins.

However, if I try to run any part of Office 2013 ( e.g. Word ), Word will crash long before the UI even initializes. 

Is/was Office tested under Application Verifier?

How might I use it as such?

Yes, I expect crashes. I happily file bug reports whenever I can.

Puzzling development

Posted: 16 Nov 2014 07:30 PM PST

I had to remove several programs to make room on my hard drive, which was maxed out.  (The only one I remember is Scribus.)  After I did this, I found that about half of my Word documents were gone, and the other half now have a Wordpad icon next to the file titles instead of the Word icon.  Also, the Word desktop icon disappeared.  I didn't realize there was any connection between Word and Scribus.  If I had known, I wouldn't have deleted it.  Or was one of the other programs I deleted responsible for what happened?  Most important, is there any way I can recover my missing files?

Thank you.

Word 2013 splits words when wrapping text

Posted: 16 Nov 2014 06:03 PM PST

Words in bulleted text are being split (e.g., the word "stones" in the following sentence):





I haven't noticed this problem in ordinary paragraphs.


(Windows 7 32 bit system)


This doesn't quite fit any other issues I've seen posted.


Thanks for the help!

Word Starter

Posted: 16 Nov 2014 05:42 PM PST

My files have recently stated that there are problems with the content.  This has continued to impact files but not all.  When opening the help it state the file is corrupt and cannot open.  When I check the yes button to recover the response is there are problems with the contents.  I have tried to go back about four days and reset the computer but that has no impact.

Any help you can provide would be greatly appreciated.  There are a number of files that wouldn't open.  I had also saved everything on a portable hard drive but that information is also not working.

Thank you for any and all help. 

Multilevel list in Outline view

Posted: 16 Nov 2014 05:12 PM PST

Split from this thread.

Hello dear Suzanne and others!

I'd like to ask a slightly different question. I am on word 2013. I made a bullet list using the bullet list icon. 

In my bullet list, I sometimes wanted to make subentries, so I simply pressed the TAB key to indent one further.

Now I have a magnificient 5 pages list (yesyes) and can't sort it alphabetically as I intended to, because the pseudo "2nd level" indents are also sorted independently of the pseudo "1st level" bullets I had made. When I go into "Outline view" and click 1st level, 2nd level or whatever level, my page just becomes blank. I guess that no levels have been defined at all. 

You understand right, that I haven't created no numbered list style before working on this. 

I only used the bullets icon (once) and the TAB key to move between my (at least visual) levels.

Any help would be really welcome as to how to solve this problem without having to redefine everything manually (which I also didn't really understand how to do, as the fake "2nd level" bullets already are recognized as smth different when I test the option "Change list level"...)

Really really thanks for help!

Lionel

How can I delete offline printers?

Posted: 16 Nov 2014 04:15 PM PST

When printing a Word 2010 document using File>Print, the default printer's name is shown with a drop-down list of other printers recognized by the computer.  Many of these no longer exist, having been replaced by newer printers, but their names remain, labeled Offline.  I've accumulated 7 such phantom printers and can find no way to remove mention of them.  Any ideas on how to remove them from the list?

Microsoft CRM - Incorrect Schema Entry

Microsoft CRM - Incorrect Schema Entry

Incorrect Schema Entry

Posted: 21 Jun 2005 04:40 AM PDT

No it will not. The problem is the column already exists in the database and
you can't modify the length of the column due to tion.

Matt Parks
MVP - Microsoft CRM

----------------------------------------
----------------------------------------
On Tue, 21 Jun 2005 16:31:59 +0100, "Bill Gates" <com>
wrote:

Thanks for the link quite useful,

another thing, As i haven't carried out a Deployment of the new changes yet,
does anyone know if just changing the Length attribute in the attribute
table in the Metabase will fix my issue?




"Matt Parks" <com> wrote in message
news:com... 

Setting week number in Microsoft CRM

Posted: 21 Jun 2005 03:53 AM PDT

Hi Sanne!
Thank you, do you now if there is a special way to update the week. no. for
the startside from Outlook?

Best Regard
Claus


"Sanne" <com> skrev i en meddelelse
news:googlegroups.com... 

Sales for Outlook profile

Posted: 20 Jun 2005 10:33 PM PDT

There is one work around. Install 2 versions of Windows XP on one
machine (on different partitions).
The trick with the outlook client is that you install a local database
server which synchronizes with MS SQL.

There are add-ons which help as well.

Safari Web Browser

Posted: 20 Jun 2005 09:55 AM PDT

I don't think it will work, but the latest Netscape might work btw. Since it
incoorporates an option to render the pages using internet explorer. But I
haven't tested it.

Rob Bakkers,
Avanade Netherlands


"Nathan Warner" wrote:
 

print record whit crystal

Posted: 20 Jun 2005 09:36 AM PDT

You must install the crystal reports smart viewer plugin in order to
print full reports.
It is requested to install first time you try to view any report in
crystal viewer.
If you have installed Win Xp sp2, check if the pop-up blocker is
stopping this plugin.

Hope this be helpful
Regards

Backup Workflow Rules

Posted: 20 Jun 2005 09:10 AM PDT

Thank you very much. I haven't found this information yet. It's very
important.
Regards,
fc3

"Tim VonDerHaar" wrote:
 

Can't reach CRM Website

Posted: 20 Jun 2005 01:50 AM PDT

I agree with bass hacker it looks like a DNS issue. In addition check in IE
that you have a DNS entry for the CRM server. DNS suffix can play funny
buggers with it too so have a look at that also.
Good luck.
Regards,
Nathan

"bass hacker" wrote:
 

Permissions

Posted: 20 Jun 2005 12:25 AM PDT

I'm sure I read somewhere that it can be achieved by editing the makeup
of the asp pages.

Dont quote me on that.

MS CRM without Exchange

Posted: 19 Jun 2005 11:04 AM PDT

Thanks for the notes! I see CRM team still has something to work on :)



"John O'Donnell" <com-nospam> wrote in
message news:phx.gbl... 

Microsoft CRM and SharePoint Portal.

Posted: 18 Jun 2005 10:48 PM PDT

I understand that using the menu bars or navigation bars we will be able to
link to the share point easily but is it possible to link a particular
opportunityA say for example to a doentA that is related to the oportunity
in sharepoint. ..if so how do i go about it..
Since sharepoint is the centralised area for doents we would like to have
easy access to the doents with out going to search through the folders.

Thanks for the prompt reply

"Daniel" wrote:
 

Import Wizard Error

Posted: 17 Jun 2005 08:42 PM PDT

Dear John,

Thanks for the response.

No, our MSCRM system is running on Port 80.

Regards,
Tony

"John O'Donnell" wrote:
 

Synching CRM Mobile

Posted: 17 Jun 2005 10:35 AM PDT

have you checked the event viewer to see if you can see any errors?

"scotia100" wrote:
 

When open a new case, only customerid, no accountid?

Posted: 17 Jun 2005 09:53 AM PDT

Search This Question in this forum

Adding a lookup field to the incident form 6/16/2005 5:52 PM PST

"CEO" wrote:
 

Problems with Sales for Outlook reinstall

Posted: 17 Jun 2005 09:40 AM PDT

At this point I've done plenty of things to clean my system :

- Registry clean
- Uninstall of SQL Server Tools and registry keys
- Delete of the MS CRM Install folder
- Delete of the MSCRM.PST file
....

I can launch the install process (thanks Marhoun, a MS CRM registry key was
still present), but I still got the same error ("The install software was
unable to install .msi file for the Sales for Outlook").

I'm completely out of ideas :( The only solution I see is to reinstall
completely my system...

Does everyone experience the same problem with the reinstall of SFO ?
Can it be due to XP SP2 ?

If MS CRM Support team has a suggestion... :(

Many Thanks
--
Michael MARTIN
BrainSoft (France)


"Marhoon" wrote:
 

Microsoft Word - Compatibility for Content Controls in Word forms

Microsoft Word - Compatibility for Content Controls in Word forms

Compatibility for Content Controls in Word forms

Posted: 16 Nov 2014 02:17 PM PST

I've created a form in Word 2013 using only content controls. I grouped the tick boxes by category. Protection is turned on for filling in forms. I have no problem completing the form. When I send it to my friend to test in Word 2007 on Windows 7, she can edit the text boxes and tab from field to field with no problem. Yet she cannot tick the check boxes. I tried using legacy tick boxes (boxes grouped and form protected) with no luck. Do I have to convert all fields to legacy fields for backwards compatibility? Should I have done Select All before grouping? Thanks for your help.

Problem with Microsoft wanting me to accept licence & confirm document settings every time I open Word 10

Posted: 16 Nov 2014 01:38 PM PST

I run Windows 7 & and have Microsoft Office 10. No changes over long period & I am not a heavy PC user. Over last few months every time I go to desktop & open Word to prepare a document or anything in Word up comes a Microsoft box asking me to accept licence agreement and then to confirm settings for documents. Until I do this I can not move to any task. I have today checked that Outlook is up to date and also went on to Microsoft site which told me that all updates for Word 10 were current. Can anyone suggest how I can fix this - I have a computer age of about 4 so keep it simple please! Thanks - this is the first time I have gone on to a forum.

MHT File Generation in Word 2010 Max Columns?

Posted: 16 Nov 2014 01:17 PM PST

Hello,

I am converting a Word file to .mht format (using "Save As"). Although the file displays correctly in the browser, I am concerned about the seemingly 77 max column limit when viewed in a text editor such as Notepad++. If any words are broken by this limit, the 77th character is replaced with '='. Is there a way to remove the max column limit or for the converted file not to use these pesky '='? Thanks!

Gary

Print multiple envelopes with just return addresses

Posted: 16 Nov 2014 12:37 PM PST

Want to just print return addresses on 200 envelopes. Would anyone have any tricks for doing this without hitting the print button 200 times?

2010?

Posted: 16 Nov 2014 11:12 AM PST


I have 2010 (complete office) in my old computer. I got a new computer just a week or so after moving into my new place. The problem is I love 2010 and do not have the disc to download into my new computer. Do I have to purchase again?My old computer was windows 7, and this one 8.1.

right clicked hypertext to copy and all text below disappeared

Posted: 16 Nov 2014 10:58 AM PST

I was working in MS Word 2013 / Office 365 for hours, all fine. Then I right clicked on a line of hypertext in a document in order to copy the link for pasting elsewhere.

When I clicked on the link, ALL of the text below it disappeared. More out of curiosity and desire to fix the issue, I highlighted where the text had been and clicked on black in font colors - it worked to restore the text.

The link was just a page link on my website, so it wasn't from an unknown source.

However, I tried it again - same issue. Closed all Word docs, waited a bit and opened only that document again - tried to copy hypertext and same thing happened. I closed all programs, went to folder and since it was basically a "throw-away" doc, I deleted it.

But - why did it happen? Will it happen again?? Anyone else have this issue?

Something went wrong downloading your template - Office 2013 SP1

Posted: 16 Nov 2014 10:45 AM PST

Good evening,

I am trying to use a template in Microsoft Office 2013.  I'm predominantly talking about Microsoft Word but I have tried all other Office applications and am getting the exact same issue.  I notice that others have previously indicated similar problems but there has been no fix.  THings I have tried:

  • Completely uninstalling Office and reinstalling.  I used the Microsoft FixIt to ensure full removal of office.
  • Uninstalling Visio Viewer - seemed to work for a few others.

Nothing seems to be working and this is extremely frustrating.

I'm running Office 2013 Professional Plus x64 on Windows 8.1 x64.  Any ideas what's happening?

Please don't tell me to download the template from the Office website - I shouldn't have to do that as the software should work properly.

office 2013 365

Posted: 16 Nov 2014 09:59 AM PST

please help just installed windows office 365 and opening the microsoft word works prfectly but when it comes to the typing part it takes time to respond and display what i have typed in other words it is extremely slow i have tried repairing it online but it doesnt work at all and when i run ms word in safe mode it works flawlessly what could be the issue with my office package....pleeeeaaaaassssseeeeeee help!!!!!

How can i format the font in cross reference automatically?

Posted: 16 Nov 2014 05:44 AM PST

I'm using Word 2010 during insert cross references, its inserted in format other than what is

now, i need to set the cross reference previously at bold and time new roman 

pleas, i need help 

Warning about printing pages with page borders in WORD 2013

Posted: 16 Nov 2014 04:37 AM PST

I just finished a flyer and printed it out single side. 

It printed out fine.

I then printed it out two sides and the top and bottom borders were cut off. Additionally the page numbering was partly missing.

So WORD 2013 has printing problems. 

I doubt there is a fix. 

I am going to print out pages and then feed them in and printout the back side. That will work for two-page flyers. 

This wasn't a problem in WORD 2007. 

I have an HP Officejet Pro 8100, but this is a Microsoft problem. 

I am putting this in Discussions since I don't think there is an answer. Usually when you post a question you get incompetent answers. I haven't gotten one useful answer yet.

Prior changes to Microsoft Office have been somewhat useful, but I wasn't planning on them wrecking their software. I really will need to consider alternatives. 

problems when writing a document

Posted: 16 Nov 2014 04:30 AM PST

Hi,  I have experienced this problem before but have never found out what causes it.   When I have typed several lines I some times find the start of one of  lines

is jutting more to the left than the others.   I then place the curser at the start of this line and use the space bar to attempt to move the line to the right so that it lines up with rest of the text,   but instead of moving the line of text,  it deletes the first letter in the line and so on.   If I then retype the letter that has been deleted then next letter is deleted and so on.   I would like to find out what I have done to cause this and also what to do to correct it.  Thank you. Derek

Microsoft Office Missing!

Posted: 15 Nov 2014 11:20 PM PST

When I first got my laptop (windows 8), it came with the Microsoft Office programs like Word, Powerpoint and Excel. Last night, I have reset my laptop and updated the latest version of Windows 8, all those programs went missing! Please help! I need it for work!

Making one page landscape

Posted: 15 Nov 2014 06:12 PM PST

I am using Microsoft Word 2013 and I am trying format ONE page into landscape while keeping all other pages in portrait. I had no problem doing this is prior versions of word. The only options I get are apply to: this section, this point forward, and the whole document.

Sorry, something went wrong and Word was unable to start

Posted: 15 Nov 2014 04:13 PM PST

Reset computer to factory settings since it was used by a now terminated employee.

Reinstalled drivers from Dell.

Reinstalled Microsoft from Office 365.

I get the error message noted in title.

I uninstalled Office and reinstalled. Same error.

help?

Word Forms exporting issues for Accessibility

Posted: 15 Nov 2014 03:54 PM PST

How do I get the form features to export to an accessible PDF? I have created a form using the developer tab, I used the insert Plain Text Content Control and the check box for Fillable areas. and they are not available in the PDF. Any links to tutorials would be helpful too!

how to convert xps to doc

Posted: 15 Nov 2014 03:14 PM PST

I need to convert an xps file to doc file and send in an email. Help please?

DCOM error, I think this goes with Word 2007

Posted: 15 Nov 2014 06:34 AM PST

I've been receiving an error message with Word 2007 for a long time.

If I click on a document in a folder I receive this error message, then Word will open & I need to find my file that way rather than just clicking on it in my documents.

I think the DCOM error goes with that maybe?

I'd hate to uninstall  and reinstall  being its an older ver of Word,  I remember asking about it here when I needed help years ago to install it from a disk.

Office 2007 SP1 - unable to install - Microsoft Office forums

Office 2007 SP1 - unable to install - Microsoft Office forums

Office 2007 SP1 - unable to install

Posted: 12 Dec 2007 01:01 PM PST

Hi Chris,

If possible, send the log file to me for further research. My email address is com.

At this point, follow the steps below to see if it works.

#1 check the Office 2007 installation
===============
1. Go to Control Panel > Add or Remove Programs.
Go to Control Panel > Programs > Programs and Features.

2. Select Office 2007. Click Change. Choose Repair to repair it. Can it be finished properly?
3. If not, repair it from the Office 2007 installation CD. If it also doesn't work, there should be problem with the Office 2007
installation, refer to the following KB article to remove and reinstall Office 2007.
928218 How to uninstall the 2007 Office system if you cannot uninstall it by using the "Add or Remove Programs" feature
http://support.microsoft.com/default.aspx?scid=kb;EN-US;928218

Install the Office 2007 SP1 update again. If it doesn't work, go to next step.

#2 Install the latest version of Windows Installer
==========================
Patch deployment for the 2007 Office release system requires Microsoft Windows Installer 3.1. If you do not have the required Windows
Installer version, you might receive an error message similar to the following during installation:
"2007 Microsoft Office Suite Service Pack 1 (SP1) failed to install"

Download and install the latest version of the Windows Installer (Instmsiw.exe) from the following link.
http://www.microsoft.com/downloads/details.aspx?FamilyID=889482FC-5F56-4A38-B838-DE776FD4138C&displaylang=en

#3 Make sure that you have sufficient free disk space on the Windows system drive.
==========================
Office 2007 Service Pack 1 (SP1) requires that you have at least 1.75 GB of free space on Windows Vista and at least 1.1 GB of free
space on other versions of Windows, much of which will be returned after the installation is complete.

#4 check the Local Install Source (LIS) for Office 2007
===============
Since all Office 2007 installs create a Local Install Source (LIS), updates such as SP1 will require this to be present and in good
condition to complete. If users have tried to recover hard disk space by removing all or part of the LIS (the MSOCache folder), it will
need to be repaired before applying SP1.

Please insert the Office 2007 installation CD (or access the original Office 2007 installation source) and then choose Repair to repair the
Office 2007 installation. It will restore the LIS.

If anything is unclear or if you have any other concerns, please don't hesitate to contact me.

Sincerely,

Emily Lin,
Microsoft Online Partner Support

Get Secure! - www.microsoft.com/security

===========
When responding to posts, please "Reply to Group" via your newsreader so that others may learn and benefit from this issue.
================================================== ====
This posting is provided "AS IS" with no warranties, and confers no rights.


-------------------- 
"71E9BCE111E9429C",processorArchitecture="MSIL " 

How do I install Access 2000 without overwritting existing Office

Posted: 12 Dec 2007 08:36 AM PST

Woops, that will uninstall the other apps,
Custom install and make access available to run from computer

"DL" <address@invalid> wrote in message
news:e%phx.gbl... 

2007 SP1 update failure on Vista x64

Posted: 12 Dec 2007 08:20 AM PST

Did you select the correct download file for the Enterprise version of Office 2007 in the 64 bit windows environment

--
Peter

Please Reply to Newsgroup for the benefit of others
Requests for assistance by email can not and will not be acknowledged.

"Darin Dugan" <microsoft.com> wrote in message news:com... 

Installation error on Office 2007

Posted: 11 Dec 2007 06:12 PM PST

Yes both of your answers did help me out a lot. I do appreciate the help you
guys have given me...

Thanks again

"Bob Cooley [MSFT]" wrote:
 

office enterprise: enterprise.ww\enterrww.cab

Posted: 11 Dec 2007 11:06 AM PST


I do not have office already installed only using msword.

"Eric Ashton" wrote:
 

Microsoft Documents Imaging won't install

Posted: 11 Dec 2007 08:04 AM PST

Hi Eric. MODI was not in Start>Programs>Microsoft Office>Office Tools, but I
did find out what I was doing wrong. In Add/remove>Office2007>Change, when I
expanded Office Tools I was choosing "Run from My Computer". It would act
as if it was installing but wouldn't. I went through uninstall/reinstall
and chose "Run All from My Computer" and then every thing worked. Why? I
have no idea, but current problem is solved. Thanks for answering.

"Eric Ashton" wrote:
 

Office 2007 Norwegian Silent Install

Posted: 11 Dec 2007 05:07 AM PST

Hi and thanks! that solved the problem.

Clive

"Eric Ashton" wrote:
 

Outlook abends

Posted: 11 Dec 2007 04:32 AM PST

Hello Bob,

Appreciate your update and response. I am glad to hear that the problem has been fixed.

I understand that there might be problems on the Windows system. You can refer to the following KB article to repair/reinstall Windows
XP to see if it is helpful.
315341 How to perform an in-place upgrade (reinstallation) of Windows XP
http://support.microsoft.com/default.aspx?scid=kb;EN-US;315341

If not, post it in the Windows XP newsgroup microsoft.public.windowsxp.general. Hope everything will be fine soon.

If you have any other questions or concerns, please do not hesitate to contact me. It is always my pleasure to be of assistance.

Have a nice day!

Emily Lin,
Microsoft Online Partner Support

Get Secure! - www.microsoft.com/security

================================================== ====
PLEASE NOTE:
This newsgroup service currently provides a one business day response time, Monday through Friday, excluding holidays.
================================================== ====
When responding to posts, please "Reply to Group" via your newsreader so that others may learn and benefit from this issue.
================================================== ====
This posting is provided "AS IS" with no warranties, and confers no rights.

-------------------- 

how do I make office 2007 look like older versions of office?

Posted: 10 Dec 2007 07:20 PM PST

It looks like you'll be downgrading. You have three color choices, period.

--
JoAnn Paules
MVP Microsoft [Publisher]

~~~~~
How to ask a question
http://support.microsoft.com/KB/555375


"Daniel" <microsoft.com> wrote in message
news:com... 

Invalid product key for Office SB 2007

Posted: 10 Dec 2007 08:41 AM PST

I uninstalled Office and the Activation assistant, rebooted and reinstalled.
It keeps asking for the product key but will not accept the one I have
bought. Again I have tried all possible combinations of 8 and B. What can I
try next?

"JoAnn Paules" wrote:
 

Need CALS now for 2007?

Posted: 10 Dec 2007 07:54 AM PST

Hi Bob,

Thanks for replying. That's just it. In the past all I ever did was grab a
copy of MS Office, load it on the term server and everything was fine. This
time I grabbed a copy of Standard Edition, loaded it on to term server and I
can't get the silly thing to work. Is there yet another version of MS Office
that I need to procure, or do I simply buy CALS to add to the version I
already have? I can't find any info on what I'm supposed to do on the MS
site.

Thanks again,

RB

"Bob Buckland ?:-)" wrote:
 

i need product key for office 97

Posted: 09 Dec 2007 10:36 AM PST

You've helped quite a few people yourself. You should be proud of that. ;-)

--
JoAnn Paules
MVP Microsoft [Publisher]

~~~~~
How to ask a question
http://support.microsoft.com/KB/555375


"LVTravel" <com> wrote in message
news:uNwT7$phx.gbl... 

missing pro11n.msi file

Posted: 09 Dec 2007 04:02 AM PST

You'll have to contact Microsoft about getting replacement disks. It's a
nominal cost and you'll need to provide some sort of proof that you own it
(product key, confirmation email, receipt, etc)

--
JoAnn Paules
MVP Microsoft [Publisher]

~~~~~
How to ask a question
http://support.microsoft.com/KB/555375


"Jennifer" <microsoft.com> wrote in message
news:com... 

office 2007 - Outlook offline cache

Posted: 08 Dec 2007 11:22 AM PST

I know you can disable it using a GPO so you can probably do the opposite as well. Look into using either a GPO or a logon script.

--
Milly Staples [MVP - Outlook]

Post all replies to the group to keep the discussion intact. All
unsolicited mail sent to my personal account will be deleted without
reading.

"Phoenix" <com> wrote in message news:e$%phx.gbl...
Milly Staples [MVP - Outlook] wrote: 


yes cached exchange mode...

Office 2007 Trial Expired Activation of New Key - How?

Posted: 07 Dec 2007 03:52 AM PST

Hi Ian,

How's everything going?

I'm wondering if the suggestion has helped or if you have any further questions. Please feel free to respond to the newsgroups if you
need any additional help.

Sincerely,

Emily Lin,
Microsoft Online Partner Support

Get Secure! - www.microsoft.com/security

==================================================
When responding to posts, please "Reply to Group" via your newsreader so that others may learn and benefit from this issue.
================================================== ====
This posting is provided "AS IS" with no warranties, and confers no rights.
================================================== ====


-------------------- 
Subscribe to: Posts (Atom)