Word 2010 Template - Double Click Opens new Template, not a Document Posted: 03 Jan 2014 03:22 PM PST When I double click on a Word template, the document that opens as a .dotx file, not a .docx file. This happens on canned templates as well as templates that I have saved. I have tried running a "Repair" on Microsoft office with no success. Any ideas? |
How do I print "2 pages per sheet" properly? It comes out a mess!! (Pics inside) Posted: 03 Jan 2014 01:46 PM PST Please review my settings at the top, I swear they SHOULD BE CORRECT. I've done this before, but I remember it being a HUGE hassle...and didn't seem like it needed to be :( Can anyone assist? I'm trying to make it look like HOW IT IS in the HP Printer Options preview....two 5.5" x 8" docs side-by-side...TWO PER SHEET. THANK YOU!!! |
draw pump curves Posted: 03 Jan 2014 12:46 PM PST can you tell me if i can draw pump curves in word 2010 i cannot illustrate it, but one curve would be say starting from the extreme left, and then slope down gradually and smoothly towards the bottom right corner of the page if we can do this i think i will be able to do other curves in other directions using the same principle thank you |
Change indent in the first line of every paragraph? Posted: 03 Jan 2014 12:38 PM PST Does anyone know if you can change the indent of the first line of every paragraph in a Word document already indented by default? I have tried MS help but it has been futile. Thank you. practicalcogitator |
Watermark visibility on paper Posted: 03 Jan 2014 12:00 PM PST I've encountered a small problem wit my watermarking of documents. In the background of every document I make, there is a faint Weierstrass p (℘) in the background based on the template I use. However, I've discovered that its visibility varies when I print the document. I use the text color named "White, Background 1, 5% darker" (r/g/b 242), which is quite weak, but not too weak, as I want it to be somewhat faint and thereby not dominating. I've also hooked it up to be partially transparent. Here is the deal: Whenever i print a blank page with little on no text the watermark is fine. If I use the automatic color setting on the printer, it is slightly lighter, but still tolerable. Unfortunately, if the page is covered with text, then a black-and-white print will have it considerably weaker. The same document printed with color will make the entire watermark disappear. Is there someway to change this behavior, so the watermark stays non-dominating but still slightly visible on both a black-and-white and a print with color? |
Word 2010, tables getting cut off and can't change "keep with next" paragraph option Posted: 03 Jan 2014 11:34 AM PST I am exported a document from a database to Word. The table is getting cut off the page and does not wrap to the next page. When I go to the Outline view I can see all the text, but in the print view it just disappears from the page. I have tried going the following with no success - The file is saved as a .docx
- Table properties/table/wrap
- Row properties is marked to break across pages
- Paragraph...all the options are dark blue, not checked or unchecked. I think if I could uncheck "Keep lines together" the table may display properly. So when I click twice to make it unchecked, then select OK or I have even tried it as default, when I return to the option it just shows dark blue again. By the way, anyone know what the dark blue box means?
- This is a personal computer so I should have the admin rights necessary to change this. For Word 2010, I have given Everyone full permission, yet I still can't change these settings.
Any ideas how I can get the table to fully display across pages and/or how I can change the paragraph options. thanks.... |
Word is Gone Posted: 03 Jan 2014 11:16 AM PST I got a new laptop with windows 8.1, I'm new to the whole windows tile experience and felt overwhelmed by it, so in cleaning up all the tiles I felt I'd never use I think I've uninstalled the word program. I still want to view and edit documents, and it came with my computer, so is there a way to get it back without paying for it? |
Tables mixing up in word Posted: 03 Jan 2014 10:01 AM PST I've had a recurring issue where i'm creating a specification document which contains several basic tables. A table may be on a number of pages. For instance if table A is on pages 1 and 2 and table B is on pages 3 and 4. When i add table C it sometimes puts a blank page (page 5) and starts table C on page 6. When i try and remove page 5 the first part of table C sites in the middle of table B whilst the rest sits correctly on the new page 5. I've tried various page break set ups but never seem to able to stop this happening and end up starting the document from new. Any advice????? Cheers |
"Do you also want to save changes to the document template?" Posted: 03 Jan 2014 09:32 AM PST I am working on a document that was created as a new document in Word 2013. After starting the document, I went to the Design tab and applied a style that I had previously inserted into the QuickStyles folder from previous Word versions, and applied the Style Set to the new document. Whenever I change the document, though, it prompts me with the question: "Do you also want to save changes to the document template?" I always choose "no," and I would like to disable that question in some way. Any ideas? |
Document formatted differently on Win7 O2010 than Win7 O2007, XP O2010 and XP O2007 Posted: 03 Jan 2014 09:04 AM PST User sent us a Word document to post to our web site. She believes she edited it last in Office 2007. It does not render properly in the combination of Windows 7 and Office 2010. We've tried the document on Windows 7, Office 2010 = 3 pages Windows XP, Office 2010 = 2 pages Windows XP, Office 2007 = 2 pages The attempts were not done on the user's computer so whatever template it may be referencing is inconsequential since it doesn't exist on any of our test computers but renders correctly on two. |
TOC to normal Posted: 03 Jan 2014 08:56 AM PST after updating the TOC, i then want to remove the links so that it is regular normal text with no relation to the original document. How can i do that? THX |
Turn off Font Change Display Posted: 03 Jan 2014 08:54 AM PST When I highlight a word the below display box appears giving me the options to change the font, font size, bold, italics, underline, etc. How do I turn this option off? |
Create Multiline plain text content control in Word 2007 Template Posted: 03 Jan 2014 08:01 AM PST I have created a simple Word form. It contains a plain text content control that will contain various lengths of information. How do I set the format for the control box so that the text for the second line begins right under the first line. |
Font and windows on Office Word changes very unstable Posted: 03 Jan 2014 06:59 AM PST I have Windows 8 and Student Office 2007. My font continually changes while I am working on the document. I don't do anything to make this change. Sometimes it goes from small to large and vice versa. Sometimes when I set the size to 12 or 14 it still comes out really small. When I print it out though it comes our large, sometimes too large since I increased the size to accommodate the document while it's still on the computer. I can't help but think it is an issue with Windows 8. I can't go to 8.1 because it causes my Internet Explorer to stop working and it won't work with Family Tree Maker. I have had to do a full recovery twice. |
Directory name is invalid on word following windows 8.1 update Posted: 03 Jan 2014 05:30 AM PST I have been working on a document for the past few weeks on Microsoft word, yesterday I received a message telling me to update my computer to windows 8.1, I did this and restarted my computer. When I came back to my computer and went onto Skydrive to find my document it and at least one other were not there (not on skydrive on my computer or online) the only place I can find the document is when going onto Word and trying to open recent documents at which I get the following message: The Directory name is not valid: (C:/Users/Lucy/.../draft 1 essay 1.doc) This document is very very important and any help would be really appreciated! |
Word 2007 hour glass comes on and off constantly. Posted: 03 Jan 2014 04:32 AM PST Word 2007 hour glass comes on and off constantly so that I cannot use the program, perhaps indexing? How do I fix this problem? |
Word 2010 stopped showing .eps files Posted: 03 Jan 2014 03:13 AM PST Hello people of the internet, I work in IT support and have a customer who suddenly can't view her .eps files in Word 2010 and the entire office pack. It's a thing that suddenly just stopped working. Until a couple of weeks ago, there was no problem at all. She is accessing Word through Citrix which connects to our terminal server. The problem is on the server itself and trough Citrix. Iv'e been seaching trough almost the intire google, and none of the answers seems to help. I've tryed reinstall the filter, reinstall Office, checking the file block settings in Word, making it a .doc document. But nothing seems to be working. If i download the files to my own pc, Word opens it without any problem, both 2010 and 2013. If i convert the .eps files into .png etc. (wihch is not an acceptable solution), Word opens it without problems too,. Office and the server is fully updated etc. Do mind that all this is running on a Windows Server 2008 R2 Standard terminal server. You would save my day if you could come up with the soloution! Thank you, Rasmus Gyldenvang |
Word 2013 : Changing which thesaurus is used in word Posted: 02 Jan 2014 06:56 PM PST I opened the thesaurus for the first time today and it asked me to select bing, dictionary or something else. I chose bing, but I don't like its results. I want to change to use another provider but I can't figure out how. I am using English(Australia) as my language but the thesaurus is using English(United Kingom) because Australia wasn't available. Any help would be appreciated, Thanks. Old title: Changing which thesaurus is used in word |
Microsoft Word 2013 randomly stops and goes into "Not Responding" Mode. Posted: 02 Jan 2014 05:33 PM PST Hello, I have been struggling with an issue with my 2013 office. Whenever I use 2013 Word and use it for around 5-10 minutes, or hit save after making multiple edits to any documents after 5-10 minutes, typically around the same period of time. Word freezes and goes into not responding mode. It doesn't save any progress I made. I haven't attempted to work with any of the other programs, I have the professional suite. I've dealt with support twice on this issue and even had them take control of my machine and look into it themselves. We ended up force uninstalling word 2013 as it would not allow me to simply uninstall it via control panel programs and features. We were able to successfully install it without any issues and it was working fine for the first couple days. And after not using it for about a week, now the same issue is reoccurring and I can reproduce the error with ease. I cannot find any similar issues specifically related with this details for any other customers. If I do not receive any resolutions shortly, I will have to bring my machine to the Microsoft store for them to investigate my machine and see what the occurrence is. If anything, the file being downloaded is corrupted as I do not have any issues with any other files whatsoever on my machine. |
Word 2013 gives File Conversion Dialog on Word 97-2003 .doc files Posted: 02 Jan 2014 05:04 PM PST Word 97.2003 opens fine on Windows 7/Word 2007 machine. But when I try to open in Windows 8/Word 2013 it displays a dialog Title: File Conversion filename Select encoding that makes the document readable Windows MSDOS Others. ....Preview says SafeGuard File encryption: Encrypted file is Garbage. |
MS Office 2013 Products (Word, Powerpoint) cannot insert cli"online pictures". Posted: 02 Jan 2014 04:37 PM PST What can I do to fix this problem. MS Publisher has no problem searching online but MS Word and Powerpoint both give me a response that the server is down. Thank you, Joyce |
Mail Merge Template with Auto Numbering Posted: 02 Jan 2014 04:14 PM PST Hello, I created a mail merge template that has auto numbering. My problem is, when I save the merged documents and reopen it, the numbering changes. Instead of seeing: -
-
-
-
-
-
I see: -
-
-
4. 5. 6. Is there a way I can prevent this from happening? |
How Do You Set Details View When Opening/Viewing Templates in MS Word 2010? Posted: 02 Jan 2014 03:26 PM PST I would like to be able to see the Details View of files when I choose to create a new/view choices for MS Word Template documents, in the Explorer view that comes up when saving or opening a Word document file. See screenshots below. In other words, when I try to view or open previous or existing Word templates, I am only shown the large icon layout view, and I have no other choices as I normally do when opening/viewing/saving Word documents. How can the inner "Word Explorer" view be changed to Details view? This is the problematic view I'm trying to change: And this is the kind of view I want: Thanks |