Open Office - [discuss] marking paragraphs

---

• [discuss] marking paragraphs
• [discuss] OpenOffice for Android
• [discuss] New idea and request for OPENOFFICE
• [discuss] FW: help in print preview
• [discuss] It would be great to have a OOo which support Symbian
• [discuss] Proposition for financing bug fixing
• [discuss] problems with update.
• [discuss] Metric Numeric Format?
• [discuss] Good idea about integrating Freemind in OpenOffice
• [discuss] Unable to create ANY NEW .odt, .ods, .od* files in OOo 3.1
• [discuss] open office. org word
• [discuss] Compatibility with Adobe Acrobat
• [discuss] Word-like bookmarks
• [discuss] 3.1 vs. 3.2
• [discuss] discuss-unsubscribe@openoffice.org
• [discuss] saving odt files unzipped
• [discuss] OpenOffice for supporting multilanguage documents?

[discuss] marking paragraphs Posted: 20 Aug 2009 07:40 AM PDT Sorry, of course it was the left which I pressed four times. I have the Open Office 3.1 where they recommend in the Help point 4 under "Select" to press the button threee times for a line and perhaps more times for a paragraph. This corresponds to my four times for a paragraph. But since you need a paragraph rather than a line they should give the help "four times for a paragraph" unless this differs in different Macs. Thank you, Axel Am 21.08.2009 um 09:40 schrieb Uwe Fischer:   --------------------------------------------------------------------- To unsubscribe, e-mail: org For additional commands, e-mail: org

[discuss] OpenOffice for Android Posted: 16 Aug 2009 12:12 PM PDT On Mon, 17 Aug 2009 15:35:27 -0500, Lars Nooden <org> wrote:   Only question here is who will develop it? Otherwise we will have another OOPM project. -- Alexandro Colorado CoLeader of OpenOffice.org ES http://es.openoffice.org --------------------------------------------------------------------- To unsubscribe, e-mail: org For additional commands, e-mail: org

[discuss] New idea and request for OPENOFFICE Posted: 10 Aug 2009 03:13 PM PDT Hi, OpenOffice.org has been capable of writing texts vertically from the beginning, OpenOffice.org 1.0. To enjoy with it, in short, with a word processor, Writer, Format - Page - Page - Text Direction - Right-to-left (vertical). If no such a choice is shown there, go Tools - Options - Language Settings - Language, then enable "Enabled for Asian languages." Tora   --------------------------------------------------------------------- To unsubscribe, e-mail: org For additional commands, e-mail: org

[discuss] FW: help in print preview Posted: 09 Aug 2009 12:56 PM PDT Michael Adams wrote (9-8-2009 23:26)  Also: when you define a Print Range (menu Format|Print Range|..) , that is the only part of the spreadsheet that is printed. (Unless you use "Print selection") There can be print ranges on each sheet of the spreadsheet document. Kindest regards, Cot -- Cor Nouws - nl.OpenOffice.org marketing contact Ontwikkelaar? Join! http://council.openoffice.org/developers.html Gevoel niet vrij te zijn? Zie www.nieuwsteversie.nl --------------------------------------------------------------------- To unsubscribe, e-mail: org For additional commands, e-mail: org

[discuss] It would be great to have a OOo which support Symbian Posted: 05 Aug 2009 01:07 PM PDT --_5de443a4-e430-4f4e-be3b-4768b6fffbb3_ Content-Type: text/plain; charset="iso-8859-1" Content-Transfer-Encoding: quoted-printable Joost=2C Thank you for the reply. I will give officereader a shot. Daryl   ian S60.  --_5de443a4-e430-4f4e-be3b-4768b6fffbb3_--

[discuss] Proposition for financing bug fixing Posted: 31 Jul 2009 03:10 AM PDT --------------080405030608070902060401 Content-Type: text/plain; charset=ISO-8859-1; format=flowed Content-Transfer-Encoding: 8bit Then, who has any ideas on the following: A) What entity/person should we touch in the OOo organisation to ask their opinion (shoudl it be managed by the OOo organisation? Should it be managed by "something/somebody" external to the OOo organisation?" B) What could be the sexy/pragmatic way to collect the features/bugs/improvements to be sponsored? a "push" approach: the items are displayed, (with a cost?) and waiting for sponsors or a "pull" approach: waiting for offers of sponsors calling for such or such improvement? C) How to estimate the cost? D) Others Bien cordialement / With Best Regards Patrick DESAUNAY +33 (0) 6 85 21 84 80 www.formachats.com membre du club Achats35 www.clubachats35.com Cor Nouws a écrit :  --------------080405030608070902060401--

[discuss] problems with update. Posted: 26 Jul 2009 12:35 PM PDT Resending, with CC to OP. On Sat, 25 Jul 2009 08:34:10 -0700 (PDT) Came this utterance formulated by Guru to my mailbox:   I hear your frustration. The update tool is a bit of a dog. It downloads the full version of OpenOffice.org anyway. Sounds like you got a slow or distant mirror. I recommend turning it off, subscribing to the announce mailing list and then waiting to be notified every time a new version comes out. The announce list only has one or two emails a month. By the way, it is not *my* update feature; I am a fellow user of the program as are ~90% of the people on this mailing list. So when you send a snotty email you are likely to get snotty replies, in triplicate, from happy users who are zealous in the defence of their baby. Crossposting will make this worse, i hope you have a flameproof suit? Anyone know how to work out which mirror he is using? -- Michael All shall be well, and all shall be well, and all manner of things shall be well - Julian of Norwich 1342 - 1416 --------------------------------------------------------------------- To unsubscribe, e-mail: org For additional commands, e-mail: org

[discuss] Metric Numeric Format? Posted: 22 Jul 2009 07:23 PM PDT On Thu, 23 Jul 2009 12:03:09 -0700 Came this utterance formulated by Lew Merrick to my mailbox:   There are more options than that, the number format string can be manually edited. Leading and trailing zeros can be forced, try "0.000" and ".000" as examples. Works for me as far back as OO.o 1.1 (my oldest version). -- Michael All shall be well, and all shall be well, and all manner of things shall be well - Julian of Norwich 1342 - 1416 --------------------------------------------------------------------- To unsubscribe, e-mail: org For additional commands, e-mail: org

[discuss] Good idea about integrating Freemind in OpenOffice Posted: 19 Jul 2009 08:12 PM PDT --0015175cde96f4b107046f25321e Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 7bit I would like to see some integration with Draw. Since draw has connectors and modules. Also I would like to see that in freemind you can embeed ODF files that are editable by OOo and OOo can save back within those attachments. On Mon, Jul 20, 2009 at 8:58 AM, Mathias Bauer <de> wrote:   -- Alexandro Colorado OpenOffice.org Espa&ntilde;ol IM: org --0015175cde96f4b107046f25321e--

[discuss] Unable to create ANY NEW .odt, .ods, .od* files in OOo 3.1 Posted: 19 Jul 2009 04:42 PM PDT Mary, within microsoft it should be possible to deinstall it in the =20 "software" part of system. I once did it with success. With a Mac I =20 don't yet know because it's very new to me. Axel Am 29.07.2009 um 07:39 schrieb Mary Compton:   <net=20              --------------------------------------------------------------------------= ------  --------------------------------------------------------------------- To unsubscribe, e-mail: org For additional commands, e-mail: org

[discuss] open office. org word Posted: 14 Jul 2009 07:01 PM PDT Joe Hartwig wrote:  Well, I have a collection of old English-style fonts that I could possibly send you. Because I've been using and stuck with O2K and Win98/2K for so long they are naturally all (or almost all) TrueType Fonts. I remember searching for the New York Times font but they claim they use a proprietary font that isn't released to the public (so they say). That hasn't stopped someone from trying though. --------------------------------------------------------------------- To unsubscribe, e-mail: org For additional commands, e-mail: org

[discuss] Compatibility with Adobe Acrobat Posted: 07 Jul 2009 06:27 PM PDT On Wed, Jul 8, 2009 at 2:24 AM, Ugly Sean<com> wrote:  I wonder if probably there was an issue on the print tools since Adobe have some options to resize on printing. If there was an attribute that was activated that could trigger this resize. However Adobe Acrobat DO have a resize functionality. -- Alexandro Colorado OpenOffice.org Espa&ntilde;ol IM: org --------------------------------------------------------------------- To unsubscribe, e-mail: org For additional commands, e-mail: org

[discuss] Word-like bookmarks Posted: 27 Jun 2009 06:21 PM PDT I followed your instructions, which were excellent. It worked perfectly, and I like it better than Office 97! Again, thanks, Bob ----- Original Message ----- From: "Michael Adams" <net.nz> To: <org> Sent: Saturday, June 27, 2009 9:25 PM Subject: Re: [discuss] Word-like bookmarks   --------------------------------------------------------------------- To unsubscribe, e-mail: org For additional commands, e-mail: org

[discuss] 3.1 vs. 3.2 Posted: 23 Jun 2009 06:37 PM PDT On Wed, 24 Jun 2009 03:19:05 -0400 Came this utterance formulated by Ugly Sean to my mailbox:   K, that explains it.   Nope, what i am saying is neither of them has been released yet. When it is released it will be 3.1.1 BTW. -- Michael All shall be well, and all shall be well, and all manner of things shall be well - Julian of Norwich 1342 - 1416 --------------------------------------------------------------------- To unsubscribe, e-mail: org For additional commands, e-mail: org

[discuss] discuss-unsubscribe@openoffice.org Posted: 22 Jun 2009 11:16 AM PDT -------------------------------1245756042 Content-Type: text/plain; charset="US-ASCII" Content-Transfer-Encoding: 7bit In a message dated 23/06/2009 10:17:34 GMT Daylight Time, it writes: org Thank you Only wanted to post some requests for new line styles and perhaps some other features like being able to merge designated layers in Draw. -------------------------------1245756042--

[discuss] saving odt files unzipped Posted: 16 Jun 2009 04:47 PM PDT Alexandro Colorado wrote:   Just to avoid confusion, let me go into details here. Maybe in the beginning OOo 1.x was not able to handle more than 4 custom properties correctly (I don't remember that exactly), but at least OOo2(!).0 was able to load and save them, so they were not ignored. OOo didn't have a UI to show them before 3.1, but they could be accessed via Basic. In OOo2.4 we also added support for these properties in Writer text fields: http://blogs.sun.com/GullFOSS/entry/custom_properties_and_fields So now there was a way to make custom properties visible. In 3.0 finally we added support for arbitrary meta data. ODF allows to put any kind of meta data into meta.xml, not only properties, and before 3.0 we just ignored that. Now this data is read, preserved and written again (we keep the whole DOM tree of meta.xml internally instead of just picking up the properties in it as before). OOo 3.1 finally also has got a new UI for displaying custom properties.   As I wrote, that was fixed already a long time ago. Maybe you didn't have custom properties, but custom meta data? This was fixed in 3.0. Regards, Mathias -- Mathias Bauer (mba) - Project Lead OpenOffice.org Writer OpenOffice.org Engineering at Sun: http://blogs.sun.com/GullFOSS Please don't reply to "de". I use it for the OOo lists and only rarely read other mails sent to it. --------------------------------------------------------------------- To unsubscribe, e-mail: org For additional commands, e-mail: org

[discuss] OpenOffice for supporting multilanguage documents? Posted: 09 Jun 2009 08:15 AM PDT jonathon wrote:   Of course an extension is needed here. As OOo itself does not have any functionality using smart tags my answer automatically included that. Last year I was in contact with someone who was interested in developing such an extension, but finally we didn't start the project. The idea behind smart tags in OOo is that text can be "tagged" and extensions can tell OOo which functionality they can apply to text with a particular tag. Best regards, Mathias -- Mathias Bauer (mba) - Project Lead OpenOffice.org Writer OpenOffice.org Engineering at Sun: http://blogs.sun.com/GullFOSS Please don't reply to "de". I use it for the OOo lists and only rarely read other mails sent to it. --------------------------------------------------------------------- To unsubscribe, e-mail: org For additional commands, e-mail: org

You are subscribed to email updates from TextNData Forums - Open Office / OpenOffice.org To stop receiving these emails, you may unsubscribe now.	Email delivery powered by Google
Google Inc., 20 West Kinzie, Chicago IL USA 60610

Mac Office 2004 -- Mac Office 2008 Microsoft Office for Mac

---

• Mac Office 2004 -- Mac Office 2008
• font spacing erors
• Bought Student Edition by mistake--OPPS!
• Macro - Scriptsmart
• How can I get the product key?
• Can I use Office among 4 users on one machine?
• run preflight script error
• Office 2004 won't run on Xserve
• Can't install Office 08 for mac.
• AutoUpdater
• Language Problems

Mac Office 2004 -- Mac Office 2008 Posted: 21 Apr 2008 12:41 PM PDT Thanks, Mickey. Tom

font spacing erors Posted: 20 Apr 2008 08:47 PM PDT On 4/20/08 8:47 57PM, in article caR9absDaxw, "com" <com> wrote:   Have you restarted? Did you upgrade to 12.0.1? Restart should clear out any font caches that is causing the problems. Link for updates or use AutoUpdater (it needs to be updated also) <http://www.entourage.mvps.org/downloads/mactopia_dl.html> -- Diane

Bought Student Edition by mistake--OPPS! Posted: 20 Apr 2008 06:27 PM PDT On 4/21/08 7:25 05PM, in article 210420081925051029%techline.com, "Strat" <techline.com> wrote:   That is not a helpful answer. Watch out or you'll end up on everyone's kill file list and not get any help when you need it. -- Diane

Macro - Scriptsmart Posted: 20 Apr 2008 03:43 AM PDT HI, smartscript gold seems to work with my office 2004 OK. However, if you have 2008 you may be out of luck. Peter

How can I get the product key? Posted: 19 Apr 2008 03:36 PM PDT Thank you very much, I find out the way to install the office!

Can I use Office among 4 users on one machine? Posted: 19 Apr 2008 09:08 AM PDT On 4/19/08 6:24 48PM, in article caR9absDaxw, "com" <com> wrote:   The forum is not version specific. In fact it is not even a forum but an interface to a newsgroup. It's much easier to use the Entourage newsreader to view this newsgroup. The Mactopia web interface is just one way to access. If you can do an email, then you can use the Entourage newsreader. Another benefit is messages downloaded are searchable by Entourage's Spotlight search. By clicking on the "more" button you can get older messages to search for help. How to subscribe to the Microsoft Entourage newsgroup <http://www.entourage.mvps.org/support_options/subnews.html> -- Diane

run preflight script error Posted: 18 Apr 2008 05:09 PM PDT On 4/21/08 12:22 04PM, in article caR9absDaxw, "com" <com> wrote:   Glad we got you working again. Most people don't want to hear they need to do an "Archive & Install" but sometimes this is the only thing that will fix the problem short of "Erase & Install". Now that is work! -- Diane

Office 2004 won't run on Xserve Posted: 17 Apr 2008 07:48 AM PDT In article <caR9absDaxw>, <com> wrote:   Why not make life much easier and settle on one version?

Can't install Office 08 for mac. Posted: 16 Apr 2008 12:36 PM PDT Hello, I hope install worked for you. In case you are still seeing issues, Please let me know and I will work with you to resolve the problem Thanks, Priyanka <com> wrote in message news:caR9absDaxw...

AutoUpdater Posted: 15 Apr 2008 05:21 PM PDT Hello, You can install AutoUpdater from the Office 2008 disk. You do not have to install the Whole 2008 Suite again. Here is what you do 1. Start installation as you did the first time 2. Continue to the "installation Type" pane 3. click customize 4. unselect all packages listed and then click install Autoupdate will be installed again now you should be able to use this auto update to get office 2008 updates. If you face any problems, please post back. Thanks, Priyanka <com> wrote in message news:caR9absDaxw...

Language Problems Posted: 08 Apr 2008 03:14 PM PDT Many thanks to Bob Greenblatt for your helpful reply joe

You are subscribed to email updates from TextNData Forums - Microsoft Office for Mac To stop receiving these emails, you may unsubscribe now.	Email delivery powered by Google
Google Inc., 20 West Kinzie, Chicago IL USA 60610

Microsoft Works - How to Prevent the Works Portfolio from Starting Automatically in

---

• How to Prevent the Works Portfolio from Starting Automatically in
• Works Suite 8 Install Word only
• Rounding query.
• Microsoft Works 8.0 wont read Works 3.0 documents (again)
• Invisible fonts in Works 4.5
• Interesting Older Material
• Note on Hurricane Rita
• Password protect Works spreadsheet
• DB: whole numbers from a division.
• Works 8 Task Launcher and Calendar
• Works 8 Vs. Office 97
• Money 2005 not allowing me to work at all
• restore a deleted wordpad doc
• Streets and Trips Mapping Omissions
• problem in works
• Reading Works Word Processor Doc. by Word users and vice versa
• Corrupted Databases, Data exists but can't be accessed.

How to Prevent the Works Portfolio from Starting Automatically in Posted: 29 Sep 2005 07:41 AM PDT Hi Mike, Apparently the option has been removed with version 8.0. In a previous post "Paul Ballou" wrote: "The option apparently has been remove since I don't have the option either since upgrading to version 8". Ken "Michael Santovec" <net> wrote in message news:phx.gbl... | To get rid of the Portfolio | - Click on the Portfolio, then Tasks, then Options and uncheck the | Start Portfolio with Windows and then click OK | - Click on the Portfolio, then Tasks, then Close | | | -- | | Mike - http://pages.prodigy.net/michael_santovec/techhelp.htm | | | "Jackie" <microsoft.com> wrote in message | news:com... | > In the older version of Works a person could prevent works porfolio | > from | > starting up automatically when the computer is turned on.. | > | > In the new version 8.0 the turn off box is not in the options menue.. | > | > Is there a way to turn it off???? | > | > Its driving me nuts.. I do not use this function.. | > | > Jackie | > | > | > | |

Works Suite 8 Install Word only Posted: 25 Sep 2005 08:40 AM PDT Andy, Many thanks. I will pass this informaton to her. "Andy" <microsoft.com> wrote in message news:com...

Rounding query. Posted: 24 Sep 2005 04:43 PM PDT Oh! if I had known that, I would have put on me footy shorts and getters, put some puss in the chully bun, cooked some pooha, and had a party. Oooooooo. I don't like what's going on lately on your political scene. Seems the whole planet is going nuts. gov | | No worries mate. Us Kiwis are always ready to help the Ozzies! | | N | |

Microsoft Works 8.0 wont read Works 3.0 documents (again) Posted: 24 Sep 2005 12:07 PM PDT D7666 wrote:   Worked. Apart from the original footer depth was 1.5 cm and now its 1.8 cm but think we can live with that. TY for anwsers - has saved someones life works here - all typed up in Works 3 - and backed up - PC exploded, had backups [good] but all this came about when reading files on new PC. Sorted now anyway TY. -- Nick

Invisible fonts in Works 4.5 Posted: 24 Sep 2005 09:27 AM PDT Homer J Simpson wrote:   ==> OK ! My printer was not selected "by default". After that correction, all my fonts are there. Thank you a lot !

Interesting Older Material Posted: 24 Sep 2005 07:09 AM PDT that worked, tried the other again and it worked. Must of been a different problem. Thanks. "Ken" <ne> wrote in message news:O%phx.gbl...

Note on Hurricane Rita Posted: 23 Sep 2005 06:46 AM PDT If mankind is causing global warming because of greenhouse gas emissions why is Mars also getting hotter and the other solar system planets? Also, water vapor is the biggest greenhouse gas on Earth and the levels of CO2 and other gases are tiny and do not change enough to account for the level of warming. Check out the Sun's weather and you'll find that this is a cycle man can't control. -- The people think the Constitution protects their rights; But government sees it as an obstacle to be overcome. some support http://www.usdoj.gov/olc/secondamendment2.htm "Rodney" <com.au> wrote in message news:phx.gbl... | An appropriate thread for people (and Presidents) to reflect | on global warming, with agreements to reduce greenhouse gasses. | Mother nature is offering a big hint here. | | | || > We are expecting Hurricane Rita later today. | | |

Password protect Works spreadsheet Posted: 22 Sep 2005 03:55 PM PDT You can password protect the file from opening, by using "Winzip", or similar. Zip up the file/files and password protect. Be sure to keep the password handy, using alpha numeric, I keep mine written inside my printer case. -- rodney at touch88.com.au Send spam to the FTC at gov Thanks, robots. "DG" <com> wrote in message news:#phx.gbl... | I am using Microsoft Works 8.0. Is there a way to password protect a | spreadsheet file for both opening and revising the file like it can be done | in Excel?? Thanks in advance for any help provided. | |

DB: whole numbers from a division. Posted: 21 Sep 2005 10:32 PM PDT Thanks Kevin, (getting old is lots of fun :) round works fine for my requirements | Integer truncates numbers and thereby ROUNDs DOWN. | It will not provide a solution to this query. | | ROUND to 0 decimal places will do as required here, | provided rounding down is wanted for those numbers with | the decimal part value of less then 0.5 | | = ROUND ( aValue, 0 ) | | | One way to always have ROUNDing UP | = =INT(Field1)+(INT(Field1)<Field1) | | Another, less accurate way, is | | =ROUND( aValue+0.49999 ,0) | (add more 9's to enhance accuracy) | | HTH, | -- | Kevin James. | Tua'r Goleuni | Microsoft MVP (Works) 1999-2005 | Works KB Links: http://www.btinternet.com/~kevin.james1/WorksFAQ.htm | | | | | | "Jim Macklin" <p51mustang[threeX12]@xxxhotmail.calm> wrote in message | news:phx.gbl... | | integer | | | | | | | | -- | | The people think the Constitution protects their rights; | | But government sees it as an obstacle to be overcome. | | some support | | http://www.usdoj.gov/olc/secondamendment2.htm | | | | | | | | "Rodney" <com.au> wrote in message | | news:u0$phx.gbl... | || | || G'day Trendsetters, | || I have forgotten how I used to do this. | || | || I need the result cell to have whole numbers. | || Eg: 60 divided by 2.25=27, not 26.6667 | || formatting the cell/field is not good enough. | || | || I think there was a min/max in there somewhere | || | || Thanks. | || | || | || | || -- | || rodney at touch88.com.au | || | || Send spam to the FTC at | || gov | || Thanks, robots. | || | || | || | || | || | | | | | | |

Works 8 Task Launcher and Calendar Posted: 21 Sep 2005 08:11 PM PDT I am having the same problem and the suggested fix didn't work. Anybody got any other ideas for this? "mr9point8" wrote:

Works 8 Vs. Office 97 Posted: 21 Sep 2005 07:46 PM PDT MSWorks: The Swiss Army Knife of DB/SS/WordProc computing. | I strongly support that statement! | | -- | Kevin James. | Tua'r Goleuni | Microsoft MVP (Works) 1999-2005 | Works KB Links: http://www.btinternet.com/~kevin.james1/WorksFAQ.htm | | | | | | "Homer J Simpson" <com> wrote in message | news:_1sYe.300354$.. | | | | Works: It's more than adequate for most users. It's friendly and has many | | templates which minimizes support requirements. Many of the limitations can | | be worked around. And you can buy it for US$10 on eBay right now! | | | | N | | | | | |

Money 2005 not allowing me to work at all Posted: 20 Sep 2005 05:52 PM PDT You receive the "Your current security settings do not allow this file to be downloaded" error message when you start Money http://support.microsoft.com/?kbid=899630 -- Mike - http://pages.prodigy.net/michael_santovec/techhelp.htm "Jaremy Brown" <Jaremy microsoft.com> wrote in message news:com...

restore a deleted wordpad doc Posted: 19 Sep 2005 08:28 PM PDT Clicked send before finishing message. Like I said before, my WordPad always ask to "Save changes to Document?" if I exit without saving. Can you duplicate why your system didn't? Ken "Ken" <ne> wrote in message news:phx.gbl... | Hi merlynnek, | | I have WindowsMe operating system on my computer. | | WordPad, which is an accessory to it's operating system, always ask if I | want to "Save changes to Document?" if I exit without saving. | | Does not your WordPad application? | | Ken | | "merlynnek" <merlynne(removethis)net> wrote in message | news:com... | | Thanks, I was afraid of that. (That's why I like wordperfect, next time | you | | open it, it says you didn't save your last work.) | | -- | | merlynnek | | | | | | "Jim Macklin" wrote: | | | | > If it was not previously saved, it was only in RAM. It is | | > gone. | | > | | > | | > -- | | > The people think the Constitution protects their rights; | | > But government sees it as an obstacle to be overcome. | | > some support | | > http://www.usdoj.gov/olc/secondamendment2.htm | | > | | > | | > | | > "merlynnek" <merlynne(removethis)net> wrote in | | > message | | > news:com... | | > | How can I restore a deleted document in wordpad. Just as | | > I was trying to | | > | save it, i pushed in a disk and some other window popped | | > up that I closed. | | > | Only it was wordpad that I closed and it didn't prompt me | | > to save. Is it | | > | anywhere retrievable | | > | -- | | > | merlynnek | | > | | > | | > | | |

Streets and Trips Mapping Omissions Posted: 19 Sep 2005 03:50 PM PDT Hello Jack, Unfortunately, users are not given facilities to directly edit the data in S&T, see the item in 'Help>Getting Started>Credits. There are, however, construction updates you may download. http://www.microsoft.com/downloads/details.aspx?familyid=522994de-80a4-46a5-b4f9-6ea38de335cd&displaylang=en See also, http://support.microsoft.com/?scid=kb;en-us;812938 http://support.microsoft.com/default.aspx?pr=sandt HTH, -- Kevin James. Tua'r Goleuni Microsoft MVP (Works) 1999-2005 Works KB Links: http://www.btinternet.com/~kevin.james1/WorksFAQ.htm "jkpsr" <microsoft.com> wrote in message news:com... |I just installed S&T 2005, but it does not have any information on the | completed portion of I288 above Richmond, VA. How can I update this | information? | | Thanks, | | Jack

problem in works Posted: 18 Sep 2005 10:47 PM PDT "sj" <microsoft.com> wrote in message news:com...   What can happen with XP is that it captures the screen and pastes it into the document as a picture. Try View : Custom Zoom and set it to 500% and see if you can figure out what happened. N

Reading Works Word Processor Doc. by Word users and vice versa Posted: 18 Sep 2005 03:11 PM PDT "Leon" <microsoft.com> wrote in message news:com...  Save As : .rtf or either of the .doc formats. Word can read those. N

Corrupted Databases, Data exists but can't be accessed. Posted: 14 Sep 2005 12:36 AM PDT Actually, all the data in a wdb (like field formulas) is binary, so all you can get from an ascii copy is records data. Fixing the field names and regaining the formulas is what I need; especially as I spent a lot of time designing the form (Colors, sizes, position, etc.) Usually, especially when designing a db, I make one of the records a "formula text" going to each field with a formula, and override the entry with a " prefix ("formulas), which would have preseved formulas for an ascii or txt view. Another trick I use is to save as a dbf 4, which preserves all the field names (but nothing else useful). Thanks. I guess I just have to eat this one. ======================= Rename file from *.wdb to *.txt. You should be able to open it with Works WP and get the ascii information at least. N

You are subscribed to email updates from TextNData Forums - Microsoft Works To stop receiving these emails, you may unsubscribe now.	Email delivery powered by Google
Google Inc., 20 West Kinzie, Chicago IL USA 60610

Microsoft Word - MS Word 2010 Text Formatting Problem

---

• MS Word 2010 Text Formatting Problem
• Cannot print readable barcode in Word 2010
• office 2007
• Word and Excel 2013 fail to launch. Why did I buy it? Solutions please in simple lingo!
• Headers Microsoft Word
• Keyboard frozen.
• Table breaking across pages - keep with next not working
• Word 2003 does not create normal.dot
• Office 2013 won't print PDFs
• paste nested table
• my microsoft word office shut down because it can not verify product license
• How to buy in South Korea
• edit individual documents on mail merge problem
• What do I need to be aware of before switching to dotm templates from dot?
• Can i Delete from an oracle table using word vba.
• Mail Merge Edit Recipient Easy Click
• Opening new document from template
• Word 2013 - why extra step to open a document?
• border printing problem
• Can't open office files which are for previous version or in protected view
• Can't Remove Mystery Table
• Add synopsis or descriptor to Index Word 2003
• Can you change a film's reference to display a film's director as the author, rather than the film's screenwriter?
• Create a 3-column sorted list in a template
• word 2010 shuts down when closing a merge document
• Formatting changes and fewer lines per page in word 2013 compared to 2010?
• Download microsoft software 2007
• Installed Office Home & Student 2013 on Windows 8 in February and worked, but now Word won't open
• How to get images to display in draft layout?
• office 365 univerisity HELP!!!
• Problems with "Save"
• Yet again, Word is slow to close

MS Word 2010 Text Formatting Problem Posted: 28 Aug 2013 02:23 PM PDT Hi Microsoft Community, I've been trying to copy text from one word document to another, but when I paste the text from the donor document into the recipient document, the formatting changes. I know this is caused by the difference in formatting styles from one page to another but although I've pasted using the option of keeping source formatting, it still mucks up the order of text and words aren't on lines where they should be as per the donor document. Note: I am pasting this onto a section break page but the problem still persists on a page break. Could you please give me a solution. Thanks in advance.

Cannot print readable barcode in Word 2010 Posted: 28 Aug 2013 02:01 PM PDT A barcode label I print-merge from Word 2010 is unreadable by my Symbol(r) scanner.  For that matter, my phone can't read it. HOWEVER, Printing the same text, copy-and-paste into Excel 2010, produces a readable barcode!   I last made a set of labels when I had Word 2007, if that's any clue   I printed to the same printer each time, an HP LaserJet. I tried flipping settings: PostScript over text, print in grayscale, best quality, draft quality, etc. I know I have to place asterisks, to wit: *BARCODE*   What setting am I missing?   So, what is the difference in how Word and Excel print??!!!?!!!?

office 2007 Posted: 28 Aug 2013 01:54 PM PDT MS office files on desktop or C drive. i cant open MS office files which are on desktop or C drive while these files are opening if i paste these files in D drive.Even if i am creating any office file on desktop its showing that file but when opening again receiving caption file could not found. please help me to resolve this problem.

Word and Excel 2013 fail to launch. Why did I buy it? Solutions please in simple lingo! Posted: 28 Aug 2013 01:33 PM PDT Simply failed to launch. Spent £79 and nothing works. Why did I bother? Solutions please.

Headers Microsoft Word Posted: 28 Aug 2013 12:57 PM PDT Hi   I have a 600 page document that I need to print out but I noticed a mistake in the header. When I changed the header on page 1, it did not change the other 599 pages. Please tell me there is an easy, quick way to change the header to all 600 pages?  I'm using Microsoft Office 2010 and it's supposed to be the same header for every single page. Thanks so much!

Keyboard frozen. Posted: 28 Aug 2013 12:32 PM PDT After holding Shift too long a box appeared and I must have answered the question wrong because now the Keyboard won't work.

Table breaking across pages - keep with next not working Posted: 28 Aug 2013 11:01 AM PDT I have several tables in my Word 2010 document that are breaking across pages.  They are two row, single column tables with a picture in the top row and the caption in the bottom row.  The caption is ending up on a different page from the picture.  I am familiar with using "keep with next" in the paragraph properties for the top row to solve this problem, and it works in a "test" document, but not in my "real" document which is a long and complicated report.  This isn't a problem with individual rows breaking across pages (I have disabled that in table properties). Any thoughts about where else to look to solve this problem?

Word 2003 does not create normal.dot Posted: 28 Aug 2013 10:42 AM PDT Word 2003 running on Windows 7 Professional (64 bit) does not create a Normal.dot after the exisiting Normal.dot template has been deleted from C:\Users\<username>\AppData\Roaming\Microsoft\Templates folder. Please advise! Thank you in advance.

Office 2013 won't print PDFs Posted: 28 Aug 2013 10:36 AM PDT I have just installed Office 2013.  When I try to print a document using any Office 2013 application (Word, Excel or PowerPoint) using Adobe PDF (version 9.5.5) the application locks up and says 'Not Responding'.  If I open Office 2010 and print the same document as PDF there is absolutely no issue.  So the problem appears to be with Office 2013.  Can anyone help? Thank you.

paste nested table Posted: 28 Aug 2013 10:05 AM PDT I am working in Word 2007. I have a two cell table in a header, and I need to paste a nested single cell table into the left cell of the header table. I have to use this approach due to the inner workings of an external Mail Merge based tool. That nested single cell table has row and column dimension control that is required. So, once I have this done in one document, I would of course like to copy/paste into other documents. But when I paste just the single cell table, Word deletes the table and leaves me with the contents in the left cell of the parent table. This happens even when I choose Paste as Nested Table. I am hoping someone has a setting to turn of "Word over think" behavior so it will just do as it's told. Or an alternative workflow. Or even just verification that this is a bug that got fixed in a more recent version. Thanks, Gordon

my microsoft word office shut down because it can not verify product license Posted: 28 Aug 2013 08:38 AM PDT Hi evrytime I want to log in my Microsoft word 2010 an error comes out saying they need to shut off cuz they cant verify license.  Please help  with this as soon as possible  thank you.

How to buy in South Korea Posted: 28 Aug 2013 08:33 AM PDT Hi, I'm interested in buying office 2013 for one computer only. I just have 2 questions. If I buy office 2013 in South Korea (where I am currently working), will the programs still be in English? I can't read any Korean so.... Also, if I get a new computer but I deactivate the one on this one and reinstall it on another computer, will it still work/count as a registered product?

edit individual documents on mail merge problem Posted: 28 Aug 2013 08:26 AM PDT please somebody help i am doing a mail merge for an exam and have followed everything to the book, but when i get to this end part i can preview the individual files on seperate pages but when i select the last option to complete the mail merge then edit indiviual documents i get the 3 files i want but instead of them starting each one on a seperate page i get them carrying on on the same page so what should be the first word on page 2 is carrying on on page 1. please help me i am enclosing what is happening, as you can see this should be 3 seperate files but is just following on Steaton Storm Basketball Club   Autumn Half Term 23 to 27 October 2006   3 day training camps for the Under 12s Will be held at Moorvale Sports Centre   Leader: Matt Stevens   Telephone our hotline for details 01202 177252Steaton Storm Basketball Club   Autumn Half Term 23 to 27 October 2006   3 day training camps for the Under 12s Will be held at Riverside Leisure Centre   Leader: Rich Thomson   Telephone our hotline for details 01202 177252Steaton Storm Basketball Club   Autumn Half Term 23 to 27 October 2006   4 day training camps for the Under 12s Will be held at Bradley Sports Complex   Leader: Adam Murphy   Telephone our hotline for details 01202 177252

What do I need to be aware of before switching to dotm templates from dot? Posted: 28 Aug 2013 08:25 AM PDT Hi all, Customer has a large number of templates (150 or so) and am about to do an update to most of them (automated thankfully).  They are all older .dot templates.  I was thinking of updating them all to .dotm while I was at it. But before I do that, is this going to cause me a lot of work because of some unknown (by me that is) landmines that I might be triggering e.g. will I have to go around to each PC (about 35 of them) and update any security settings?  And is there anything else I need to be aware of? Thanks, Albert Gostick

Can i Delete from an oracle table using word vba. Posted: 28 Aug 2013 08:24 AM PDT ok so using the active x data objects 2.1 to load data from a database (oracle) and i get my select statement working perfectly and i can read the data into vba variables for messing about with in VBA! However i have a one off requirement to delete one row of data off the data base after i have read it in. Any idea's on how to delete it? trawled the web and all the answers are based on access.  i have tried to modify those things but had little success. i believe this needs to be run as a command instead of into a recordset? any help would be appreciated. ta

Mail Merge Edit Recipient Easy Click Posted: 28 Aug 2013 08:12 AM PDT When I export an excel list to word in the mail merge program, I have the option to edit recipient list after selecting my file.  When I get to the edit recipient list, I have a list/line of boxes I can check to include or exclude names/items from the list, choosing which ones will end up as labels.  It requires clicking on sometimes hundreds of boxes.  In Quickbooks, I can hold down the right mouse key and scroll down the list, which checks all the boxes as I scroll through.  Let go of the right mouse button and the process stops.  Is there any way to have this kind of functionality with the mail merge edit recipient process?

Opening new document from template Posted: 28 Aug 2013 08:05 AM PDT I've been having this problem for a while now when trying to create a new document, either on Word 2010 or Excel 2010. I click on File -> New. Then if I double click on the "Blank workbook" or "Blank document", nothing happens. I have to click once to select the template, and then hit enter. It's not a major nuisiance, but I would rather be able to double click as I used to do. I'm using Office 2010.

Word 2013 - why extra step to open a document? Posted: 28 Aug 2013 06:13 AM PDT in Word 2010 you just open Word, then do File Open, and  it opens your Documents library. in Word 2013 you open Word, then Open computer NOW you see your documents library, and can open it okay, so I know it is just an extra step, but users are complaining. is there any way to make it more like 2010?

border printing problem Posted: 28 Aug 2013 06:03 AM PDT When I use Word 2010 to create a border around text or a picture the border will not print. It shows on the preview page but will not print. I didn't have this problem when I first purchased the Office Home and Student 2010 software. This is a recent problem. 2007 word documents print fine. Any suggestions?

Can't open office files which are for previous version or in protected view Posted: 28 Aug 2013 03:34 AM PDT When I get some office files (word, excel, etc) which are saved in previous version (I'm using Office 2013) or get files which are in protected view, I can't open them and when I clicked on them, just word splash screen (the small blue -for word- screen which start add-ons, and load setting) showed up and it stops on that and I have to close that splash screen. What is the problem?

Can't Remove Mystery Table Posted: 28 Aug 2013 02:46 AM PDT All the text in my 74-page document is in a table. The table is preventing my book from being published by Smashwords. I use Word 2007, but the document has to be saved as Word 97-2003. Other books formatted at the same time, using the same Styles menu have published OK. In this one, each paragraph seems to be in a row. When I click on borders, the table shows. If I click in the table, the table tools ribbon does not appear, so I can't convert to text. No table menu appears if I right click. Pasting to Notepad & back does not destroy the table. Pasting to Excel and back as un-formatted text does not remove the table.  Pasting one line of the text from Notepad to Word brings the table formatting back with it, so I can't even rescue the text a line at a time. I would be so grateful for help.

Add synopsis or descriptor to Index Word 2003 Posted: 28 Aug 2013 01:39 AM PDT I need to add a short descriptor or synopsis as a sub-heading to an index entry that summarises what the heading referred to is about  in Word 200. Is his possible? Like this: General Introduction                      This chapter is all about the introduction.

Can you change a film's reference to display a film's director as the author, rather than the film's screenwriter? Posted: 27 Aug 2013 11:27 PM PDT I'm referencing a Feature Film (Se7en) in my essay, but when I reference it (Chicago 16th Edition) it uses the film's writer as the author, when in fact it should be the director: (Walker 1995) Walker, Andrew Kevin. 1995. Se7en. Film. Directed by David Fincher. Produced by Arnold Kopelson and Phyllis Carlylle. Performed by Brad Pitt and Morgan Freeman. New Line Cinema. When it should be: (Fincher 1995) Fincher, David. 1995. Se7en. Film. Written by Andrew Kevin Walker. Produced by Arnold Kopelson and Phyllis Carlylle. Performed by Brad Pitt and Morgan Freeman. New Line Cinema. Is there a way to change this?

Create a 3-column sorted list in a template Posted: 27 Aug 2013 08:35 PM PDT I am trying to create a template for meeting minutes using Word 2007. Ideally, I'd like to type a list of names in (the attendees), and have them automatically format into a 3-column list that's sorted alphabetically. I can think of a few ways to do this (e.g., using columns or a table), but I'm not sure how to have the list automatically sort when I enter the names. I'd like to avoid having people do the formatting manually, if possible. Any suggestions? Thanks in advance!

word 2010 shuts down when closing a merge document Posted: 27 Aug 2013 07:31 PM PDT  After complete a merge letter process and then closing the word document, Word sends a message that word must shut down; sometimes it also cites a long error message which includes this number: WRS{2C3R1DOE-CB66-45BC-A575-8B49FAC7AO72. Thanks. Roland Casad, Oregon

Formatting changes and fewer lines per page in word 2013 compared to 2010? Posted: 27 Aug 2013 05:59 PM PDT I have 2-page documents created in Word 2010 that I opened on a new computer with Word 2013. All settings are the same (page size, fonts and points, spacing, margins, etc). The 2013 version is now 2.5 pages vs the original 2 pages using the 2010 version. Sentences are broken in different places and there are about 10 fewer lines per page in 2013. I tried to change the display option to 2010 but it didn't change anything. Is there any way to revert back to the original formatting?

Download microsoft software 2007 Posted: 27 Aug 2013 05:51 PM PDT i have purches the microsoft  office home and student 2007, i need the soft were to down loud on this pc, i have the cd but this new one dont have for cd roam. also cant fine the down loud on line.

Installed Office Home & Student 2013 on Windows 8 in February and worked, but now Word won't open Posted: 27 Aug 2013 05:16 PM PDT When ever I attempt to open Word a box comes up asking me if I want to allow the following program to make changes to this computer. The program name is Microsoft Word, verified publisher: Microsoft Corp. Whether I click Yes or No I then get this message: We're sorry, but Word has run into an error that is preventing it from working correctly. Word will need to be closed as a result. Would you like to repair now? When I hit repair now it as if I want a Quick Repair or online.  I've done both and end up right back where I started when I attempt to open Word. I've uninstalled the program and reinstalled and still no luck. Excel, Powerpoint both work, just not Word.

How to get images to display in draft layout? Posted: 27 Aug 2013 05:11 PM PDT If I paste an image into a Word document, it is only visible in print layout (page mode), not in draft layout (normal view). But, if I first paste it into Visio and then paste that image into Word, it is visible in both layouts. I could not find a way to attach a Word document, so I created a screen shot as a JPG. I couldn't get that to upload (I kept getting "The connection was reset"), so I created a shared DropBox folder containing both the Word document and the JPG image. Here's the link: https://www.dropbox.com/sh/o9ah4faeul14sq8/6CQUKgWs47 If I select the first image, I see square handles. If I click on the second image, I see round handles. Clearly, these images are being stored in different formats. My question is : How can I get all images to display in both print and draft layout? The "Show picture placeholders" option is not checked. Thanks

office 365 univerisity HELP!!! Posted: 27 Aug 2013 04:32 PM PDT   Everytime I try using any of the Office 365, University programs (word, excell, pp) it completely crashes my  computer and shuts it down.  The program opens, and within 10 seconds, everything crashes.  I have followed posts and tried starting in the safe mode and doing the repairs, but no luck.  It was such an issue installing it, I don't really want to reinstall.  I have the program for a month and not been able to use it once.  I'm very upset with the program right now

Problems with "Save" Posted: 27 Aug 2013 04:32 PM PDT Hi everyone! I have been having a problema wjen saving files in Office. Whenever I hit the "Save" button or give the "Save" command, the process goes slow on me  (veeeeeery sloooooooow), it takes more tan five minutes for it to process. I will be writting a document, I hit save, then the saving box appears and the process freezes. I can not cancel, allthough I can go to a different application (in Word or other). Any suggestions as to what may be happening and how I can fix this? this started about two weeks ago.   thanks!

Yet again, Word is slow to close Posted: 27 Aug 2013 04:07 PM PDT Hello. Yet again, another request for some ideas about how to "fix" the slow close in Windows.  Points: 1) Purchased new Dell computer five days ago.  2) Installed Office 2010. 3) When I click on the "x" to close a word document, the little wheel goes round, and round, and round for about 3-5 seconds. Ultimately, the document closes. 4) Tried replacing Normal template. Not corrupted. No change. 5) Uninstalled. Ran CCleaner to remove leftover registry bits. Reinstalled. No change One observation: When I open and close Word documents from a flash drive -- no problem. When I open/close from my hard drive = problem. Could I have a faulty hard drive? Other suggestions? Thanks.

You are subscribed to email updates from Office Category - All Questions, Microsoft Office Word To stop receiving these emails, you may unsubscribe now.	Email delivery powered by Google
Google Inc., 20 West Kinzie, Chicago IL USA 60610