Pages

Search

Cheap Statistic's tool. - Microsoft Exchange

Cheap Statistic's tool. - Microsoft Exchange

Cheap Statistic's tool.

Posted: 27 Apr 2004 03:25 PM PDT

Don't know about pricing, but http://www.quest.com/messagestats/ ?
www.promodag.com ?

Jim Boettger wrote: 

How to replace domain name for the emails going out?

Posted: 27 Apr 2004 07:03 AM PDT

Thanks for your help,


We acctually receive emails from our provider's POP3 server through POP3 connector. So I'm not sure if that domain name sharing would apply to that, But I will look into that.

Thanks,
Les
"Matthew Byrd [MSFT]" <microsoft.com> wrote in message news:%phx.gbl...
Hi Les,

It sounds like you are looking to send and receive email as com while there is another server out there that is completely separate that will also need to send and receive email as com ?

If this is the case then you will need to setup SMTP domain name sharing.

258203 XFOR: How to Configure Exchange to Share SMTP Domain Name Space
http://support.microsoft.com/?id=258203

What I might recommend is that you configure you system this way instead.

You send and receive as company.com this will allow you to have your own MX record on the internet and you will be able to process your own incoming and out going mail with any of the issues of setting up SMTP sharing.

Hope this helps,

--
Matthew Byrd
Microsoft PSS

When responding to posts, please "Reply to Group" via your newsreader so
that others may learn and benefit from your issue.

This posting is provided "AS IS" with no warranties, and confers no rights.

"les" <com> wrote in message news:7Ktjc.23175$bellglobal.com...
Hello,

We use our MS Exchange Server 2000 for just sending emails and we need to have domain names the same as of the server where we receive emails (at our provider). What are the ways to make domain name the same?
In other words the question is:

How to make domain of Server B look the same as Server A that is completely separate and run by other company ?

Any help is greatly appreciated,
Les

Exchange 2003 time question

Posted: 27 Apr 2004 06:59 AM PDT

 
the same if the time 
seeing. 
confers no rights. 
wrote in message 
one 
the Eastern time zone. 

e-mail system limits the number of recipients that can be addressed in a sin

Posted: 27 Apr 2004 06:14 AM PDT


after the registry hack in the accompanying post, I am
still getting:

Your message did not reach some or all of the intended
recipients.

Subject: Test (again) delete pls..
Sent: 4/27/2004 11:15 AM

The following recipient(s) could not be reached:

Tuttle, Daniel on 4/27/2004 11:15 AM
The e-mail system limits the number of
recipients that can be addressed in a single message.
Send the message multiple times to fewer recipients.
<MGMAIL.mgm.ufl.edu #4.5.3 smtp;452 4.5.3 Too
many recipients>






 
Each Message 
confers no rights. 
message 
contacts, 
of 
have 
in 

How to disable the Msg for Expiry Day on Exchange OWA ,

Posted: 26 Apr 2004 09:20 PM PDT

Yes

"William Lefkovics [MVP]" <techsanctuary.org> wrote in
message news:com... 

ExMerge for 5.5

Posted: 26 Apr 2004 03:43 PM PDT

THANKS SO MUCH! 
believe 
posted as 

Messages in my BadMail folder

Posted: 26 Apr 2004 01:18 PM PDT

Mark:

Thanks for your reply. I kinda of thought that was well but the number of
message is so high. Yesterday I deleted the contents of the folder. This
morning there are over 17,000 files in the folder. I only have 525
mailboxes.

Any ideas?

Harrison Midkiff
"Mark Arnold [MVP]" <org> wrote in message
news:com... 

Outlook discussion groups ??

Posted: 25 Apr 2004 04:26 PM PDT

You think that's what they meant?
How would you go about using a public folder for "discussion groups"? Would you make it an email folder? If so, how would the relevant emails get into that folder? Could the public folder also contain documents
Do you think they might be referring to "sharepoint services"?
Any additional info from anyone would be appreciated.

Microsoft Word - Why have I reverted to Word 2007 but kept the preview with Excel files?

Microsoft Word - Why have I reverted to Word 2007 but kept the preview with Excel files?

Why have I reverted to Word 2007 but kept the preview with Excel files?

Posted: 09 Nov 2012 01:22 PM PST

My Word documents have reverted to Office 2007 - though Excel files remain as 2013 Preview.???

How do I add text to a shape?

Posted: 09 Nov 2012 08:17 AM PST

In Word 2007, I could just type into a shape.  Now I have Word 2010 and I cannot do that.  How do I add text to a shape?  I tried adding a text box and typing text in that, and then moving it to the shape, but there must be another way.  Can someone help me?

If then else Home/Work address Fields Mail Merge

Posted: 09 Nov 2012 07:43 AM PST

How do I use a work address field on a mail merge or a home address if the work address is blank?  Thanks for any help.

Is there a special way in Word to use the Alt + 'x' technique to apply a combining mark to a character that is also a hexadecimal digit ?

Posted: 09 Nov 2012 04:59 AM PST

Let's say I want to apply the COMBINING DIACRITICAL MARK U+0300 to the character g in Word. A simple technique is to type g followed by 0300 followed by Alt + 'x', and I get g̀. However if I apply the same mark (U+0300) to the letter a, using the same Alt + 'x' technique, Word will print the .notdef character ꌀ, as a is interpreted as an hexadecimal number and Word will consider the character a0300 an invalid Unicode character. I wonder if there is any trick in Word to use the Alt + 'x' technique in those cases, i.e.. where the base character is an hexadecimal digit ?


Flip text

Posted: 09 Nov 2012 04:27 AM PST

There is really nothing new here, but I was reviewing some of the previous posts on this topic and thought it might be helpful to summarize the various methods in a graphic tutorial:  http://gregmaxey.mvps.org/word_tip_pages/rotate_text.html

The basic takeaways are:
1.  While you can rotate text in Word 2003 and earlier (earlier within reason), you can't produce true mirrored (flipped) text.

2.  The methods used to created mirrored (flipped vertical or flipped horizontal) text in Word2007 and Word2010 are different.

3.  The ability to produce text rotation effects is greatly expanded with the new graphics engine in Word 2010.

 

If any users see something that I missed or just flat out got wrong, please let me know.

 

 

 

Copy and Paste problem

Posted: 09 Nov 2012 04:05 AM PST

When I 'copy' text from a source, then open Word 2010 and seek to 'paste' the text, the popup menu has 'Paste Options' greyed out and unusable. The same with OneNote.  This is an irritant.  How do I effect 'paste' when an MS app is opened after 'copy'?

Remove Look Up from Task List

Posted: 08 Nov 2012 03:41 PM PST

When I click RIGHT MOUSE if the cursor tocuhes "Look Up" (which is all too often) I have a very long wait ahead of me, because it tries connecting to the Internet. . . . terrible feature in 2010.  Can it be removed?

Word 2010 Step by Step

Posted: 08 Nov 2012 01:23 PM PST

In Chapter 10, "Arranging Objects on the Page", I can not get the pictures to overlap.

 

Anybody have this problem or know what I might be doing wrong?

 

Thanks,

 

Scott

forced quotation marks error

Posted: 07 Nov 2012 02:15 PM PST

No matter what font I use (and this has been happening for over a year now), my MS Word forces the single and double quotation mark to become the ending one when it's supposed to be the beginning one.

My uncle said, ‚I'm tired!'

Our uncle said, „I'm very tired!"

Can anyone help?

word 2007 footnotes affects text wrapping when print

Posted: 06 Nov 2012 08:14 PM PST

The symptom:
In writing in Chinese,  2 footnotes have been added in one line, it is fine showing in the display, but when it is printed from printer, the same character appears again in the beginning in the next line.

The Chinese text font is in DFKai-SB and the number font is in Times New Roman. There are no spaces in between all Chinese characters in a same paragraph.

I'm not sure the problem is on Word or from the printer ? Please help.

Chicago Style 16th edition in Word 2010

Posted: 03 Nov 2012 02:14 PM PDT

The 15th edition of Chicago Style citation is pre-loaded into Word. Is there any way to get the 16th edition?

Trouble opening a saved file w/ Word 2010 Starter

Posted: 03 Nov 2012 02:13 PM PDT

I am getting an error message stating "File cannot be opened because there are problems with the content".   When I click on Details, there is "no error detail available".  I realize this may be due to my very boring 2012 Holiday Letter content, but after writing and editing the darn thing, I really would like to make copies and print this!  Does anyone know why I am getting this error after having no trouble editing it recently?  I have tried opening it various right click options and get the same message, etc.   Thank you!

Office Starter keeps giving me an error, unable to use it

Posted: 03 Nov 2012 12:33 PM PDT

how do i install microsoft starter that came with my computer i have tryed and keeps comming up error to try again  i have tryed 5 times and nothing

 

Microsoft Word - Microsoft Office 7 problem

Microsoft Word - Microsoft Office 7 problem

Microsoft Office 7 problem

Posted: 07 Nov 2012 03:55 PM PST

I can't save any of my documents in MS Office 7.  In Word, Excel, etc I keep getting same message:  Microsoft Office (Excel) has stopped working.  The screen gets all cloudy with this mesage on it, and it won't go away. Does anyone know of a fix for this?

"don't add space between paragraphsof the same style"

Posted: 07 Nov 2012 02:23 PM PST

I really hate the fact that Word 2010 forces me to adjust paramaters every time I do a table.  I normally try to use say 6pt spaces between points, and previously, this worked a treat.  With 2010, every time I add spaces, it assumes, I don't really want them (!!#!?!) and I have to go throuhg a long process of selecting paragraph, then de-selecting a NEW tick box called "don't add space between paragraphsof the same style"

 

Who would have thought, that by default, a user would add a space if they did not want to have a space!!

 

Any suggestions on how to remove theis newly-evolved nuisance feature?

Microsoft word

Posted: 07 Nov 2012 01:34 PM PST

For some reason Microsoft word has disappeared from my computer.  How do I retrieve it?  Pam

Microsoft Office Word Viewer Still supported?

Posted: 06 Nov 2012 04:13 PM PST

Hi,

I'm using Microsoft Office Word Viewer 2003. It works well.

But now the problem is that I'm told that Microsoft Office Word Viewer 2003 is End of life.


That means I can not receive any security patches for word viewer any more. I googled, But I find out there is no Microsoft Office Word Viewer 2007/2010.



What Should I do now? Is Microsoft Office Word Viewer 2003 still supported by Microsoft?



Thanks

Getting a multlevel list to reset automatically - Word 2007

Posted: 06 Nov 2012 11:44 AM PST

I have created a template with a 5 level multilevel list, following the instructions of Shauna Kelly.  One problem I am having is that as I go through the various levels, for Heading 1, then 2, then 3....when I return to Heading 1 for the second time, the numbering for the next levels do not restart themselves automatically and I can not get this fixed.

It looks like:

I.   Level 1

  A.  Level 2

  B.  Level 2

      1. Level 3

      2. Level 3

II  Level 1 the second time, numbering is correct

   C.  Level 2   I need this to reset back to A

       3.  Level 3   I need this to reset to 1

I can fix this manually, but the users will be quite challanged to do this, and may not even notice.

Any suggestions will be greatly appreciated.


Paul

is there any way to add pinyin/furigana automatically?

Posted: 06 Nov 2012 06:59 AM PST

so the topic of the thread, is there any way to add pinyin/furigana automatically to a chinese/japanese text?
have found the phonetic guide, but it has to be inserted one by one (so is like writing the text twice)

After creating a custom size paper using Windows 7, how do I keep and name that size on the drop down menu?

Posted: 05 Nov 2012 03:21 PM PST

My OS is Windows 7, and I'm using Word in Microsoft office 22010.  I know hot to create the custom size paper I want (7.2" wide; 10.5" high) but after setting margins and clicking OK, it disappears and that size paper does not appear when I'm ready to type. 

How do I give that paper a name and enter it into the drop down Paper Size window so may use it when needed?  Thank you.

Office immediately crashes upon opening

Posted: 02 Nov 2012 05:32 PM PDT

When I open any of the Office programs, they immediately "stop working" and crash.
I have no idea what the problem is, other than this:
  Problem Event Name: APPCRASH
  Application Name: winword.exe
  Application Version: 15.0.4128.1022
  Application Timestamp: 502b994a
  Fault Module Name: unknown
  Fault Module Version: 0.0.0.0
  Fault Module Timestamp: 00000000
  Exception Code: c0000005
  Exception Offset: 003b5d5e
  OS Version: 6.1.7601.2.1.0.768.3
  Locale ID: 1033

Additional information about the problem:
  LCID: 1033
  skulcid: 1033

Is there anyway that a summary page generate instantly, while you are typing?

Posted: 02 Nov 2012 09:04 AM PDT

Hi there,

 

First of all I'm not very expert in word, but I know how to solve most of my problem.

 

I just wonder if there is anyway to gererate a summary page, at the begining or end of a document, while you are typing. I do lots of inspection report and I need to summerize all my points under summary category.

 

To give you a better idea, there are about 12 different sections in my report and under each of them, I write some comments. At the end, I have to go back page by page and copy-paste those comments in summary page. I just wonder if there is any shortcut for this process? Or any suggestion?

 

Thanks for your help,

Eric

trying to open an Attachement in email, get message that Word Starter 2010 cannot be opened

Posted: 02 Nov 2012 08:12 AM PDT

I'm trying to pull up a email paper clip and it keeps saying microsoft word starter 2010 cannot be opened?

Drucker DCP 357C am Router Easy Box 803 A funktioniert nicht

Posted: 02 Nov 2012 06:01 AM PDT

Habe den Drucker an den Router angeschlossen, um ihn im Netzwerk nutzen zu können, aber nichts passiert. Drucker ist im Router freigeschalten.

Excange 2k not sending large messages - Microsoft Exchange

Excange 2k not sending large messages - Microsoft Exchange

Excange 2k not sending large messages

Posted: 26 Apr 2004 08:12 AM PDT

Mark Arnold [MVP] put finger to keyboard and typed: 

There is only a single SMTP Connector, and this has no size limits on it
what so ever, that I can see, there is certainly not a specific one for
Pilkington.

The reason I singled out Pilkington is that it is one of two that it is
happening to, the other being ingersoll rand

Stuart

Exchange tabs in AD

Posted: 26 Apr 2004 07:21 AM PDT

run the exchange setup and select only the Exchange System Management
components at the bottom of the selection box that appears.


"T" <co.uk> wrote:
 


Mark Arnold MCSA MCSE+M MVP, org
FAQ: http://www.swinc.com/resource/exchange.htm &
http:http://www.swinc.com/resource/e2kfaq.htm
Blog: http://www.msexchange.me.uk

software mirroring and exchange 5.5 problem!

Posted: 25 Apr 2004 06:42 AM PDT

First of all thank you for your prompt reply!

Actually the logical drive M: does exist and it has two
subfolders: MBX and PUBLIC FOLDERS. I cannot find those
folders anywhere in C:, i can only find them in the
logical drive M:

As far as your suggestion is concerned, i cannot do
anything else, since there is no raid controller present.
Until we get to buy one, it is the only possible solution
for mirroring.

So, what would eventually happen to M:?

Does the question remain, or have i misunderstood you?

Thanx once more,
ilias.
 

SMTP Not sending emails...

Posted: 23 Apr 2004 07:41 AM PDT

Hello,

I used to be able to send emails internally. However, I cannot anymore. Now
I'm totally confused. I really didn't change anything. When traced the email
that I sent internally I got the following messages:
-------------------------------------------------------------
Tracked message history on server MYSERVER
SMTP Store Driver: Message Submitted from Store
SMTP: Message Submitted to Advanced Queuing
SMTP: Started Message Submission to Advanced Queue
SMTP: Message Submitted to Categorizer
SMTP: Non-Delivered Report (NDR) Generated
-------------------------------------------------------------

I don't have any connectors and I don't think I need it since I have only
one server that needs just simple (default) configuration.

Also, my queues are sitting under the Default SMTP Virtual Server/Queues.

Thanks,
Les

"Chris Ahlers [MSFT]" <Microsoft.Com> wrote in message
news:erqH$phx.gbl... 
on 
================================================== ========================== 
rights. 
================================================== ========================== 
2000. 
can 
-- 
-- 

Exchange Log Files

Posted: 23 Apr 2004 04:46 AM PDT

Is your online backup now removing logs? What backup software are you using?
If you're using NTBackup, are you running it from the Exchange server or
from another server with Exchange System Manager installed? Remember - this
must be an ONLINE backup of the stores - not a file-level backup. Exclude
the M drive, Exchange database & log folders from file-level backup.

Syed Ali wrote: 

Mailbox rights in 2003

Posted: 23 Apr 2004 03:00 AM PDT

While this article talks about exmerge, if you want your domain admins to be
able to access mailboxes thie following article is what you will need to do:

823143.KB.EN-US
How to Configure the Administrator Account to Use Exmerge 2003 in

microsoft.com
Please do not send email directly to this alias. This alias is for
newsgroup purposes only.
This posting is provided "AS IS" with no warranties, and confers no rights.

"T" <co.uk> wrote in message
news:phx.gbl... 
thing 
if 
the 

Download all messages from exchange server through outlook 2000 client

Posted: 22 Apr 2004 09:50 PM PDT

In addition to Mark's comments -

P.Ravialahan wrote: 

Yes, that's the way it's supposed to work.
 

What does server "cleaned" mean? Why not just connect and use an OST file to
sync to for offline use? 

Why do you need the items removed from your mailbox, if you don't mind my
asking? Why use Exchange if you don't want to keep your stuff on the server
for centralized admin, backup, ease of access? 

Exchange 2000 not receiving e-mail

Posted: 22 Apr 2004 03:11 PM PDT

You will want to contact Qwest and see if they can help you since it was
working before the installed the new modem.

--
Michael Barta [MSFT]
Microsoft Exchange Support

Please do not send e-mail directly to this alias. This alias is for
newsgroup purposes only.
This posting is provided "AS IS" with no warranties, and confers no rights.

"JCF" <microsoft.com> wrote in message
news:com... 

Lanwench Help!

Posted: 22 Apr 2004 09:17 AM PDT

Yes, this computer has the dumpsteralwayson registry
setting. I tried to recover the folder by giving this
user full rights the parent folder and he had full rights
to his deleted folder. I even gave his username full
permissions. But none of that worked. (His folder did
show up under the recover deleted items) You don't have
to worry about helping with this issue any more, I just
made him a new folder and then changed the permission so
that no one can delete a folder, by making no one an owner
of any folder. Thanks for your help!

 
dumpsteralwayson registry 
rights to all the 
then under recover 
server 
folder. It 
folder 
It 
recover 
you 
this 
folder. 

mail redirection

Posted: 19 Apr 2004 01:53 PM PDT

Take a look at SelectiveJournaling application at http://www.ivasoft.biz


Regards,

Victor Ivanidze,
software developer





"Bernd" <microsoft.com> wrore:
news:138301c42650$56e2a670$gbl... 

Scheduled email stays in outbox - Microsoft Exchange

Scheduled email stays in outbox - Microsoft Exchange

Scheduled email stays in outbox

Posted: 22 Apr 2004 06:36 AM PDT

I found a possible explanation in Microsoft KB 311722.
http://support.microsoft.com/default.aspx?scid=kb;en-us;311722

The message subject and sent time are indeed in italic.

I have SP3 installed on my server, I guess that I'll have to upgrade it to
SP4

Btw, are you saying that as a normal operation when you send a schedule
email, that you have to go in Outbox and press send again even if you've
already press send after writing my message?

If its the case, then my problem lies there.

thanks!

Heather. <microsoft.com> wrote in message
news:2bc001c42876$58776c50$gbl... 

confused with replication

Posted: 22 Apr 2004 06:19 AM PDT

You can also use the pfmigrate utility if you have lots of folders.

822895 Overview of the Public Folder Migration Tool
http://support.microsoft.com/?id=822895

--
Michael Barta [MSFT]
Microsoft Exchange Support

Please do not send e-mail directly to this alias. This alias is for
newsgroup purposes only.
This posting is provided "AS IS" with no warranties, and confers no rights.

"Amy-Leigh Mack[MSFT]" <microsoft.com> wrote in message
news:phx.gbl... 

Delivery of email to mailbox Problem

Posted: 22 Apr 2004 05:47 AM PDT

What recovery?
Note - this is still not really an Exchange issue. The POP connector mfr's
website or doc should tell you exactly how you need to set up their product,
and the Exchange server, to use the POP connector. I can tell you how to
host your own domain's mail instead if you're interested, so you won't need
the POP connector at all, if you like.

Japie Niemand wrote: 

moving exchange 5.5 server mailbox to a.pst

Posted: 21 Apr 2004 03:12 PM PDT

"sean" <microsoft.com> wrote:
 
What:
http://support.microsoft.com/default.aspx?scid=kb;EN-US;265441
Where:
http://www.mvps.org/exchange/Exmerge.htm for the version that I think
you need
http://www.microsoft.com/downloads/details.aspx?FamilyID=429163ec-dcdf-47dc-96da-1c12d67327d5&DisplayLang=en
If you need the latest version.


Mark Arnold MCSA MCSE+M MVP, org
FAQ: http://www.swinc.com/resource/exchange.htm &
http:http://www.swinc.com/resource/e2kfaq.htm
Blog: http://www.msexchange.me.uk

Exchange Backup Types

Posted: 21 Apr 2004 01:53 PM PDT

In addition to Linda's answer - you need to run a database level (online)
backup nightly for disaster recovery (mailbox level is useless for that) and
it will also purge your committed transaction logs. If you want/need brick
level as well, do it only in *addition* to the online full backup....brick
level takes up a lot of time and tape, so you may want to select only a few
important mailboxes/PFs for it.

Bridie wrote: 

Change password over OWA

Posted: 21 Apr 2004 10:56 AM PDT

tnx
"Mark Arnold [MVP]" <org> wrote in message
news:com... 
through 
http://support.microsoft.com/default.aspx?scid=kb;en-us;327134&Product=exch2k 

All users receive appointment invitation for a single user

Posted: 21 Apr 2004 09:13 AM PDT

Turns out that the user had assigned the entire global address book as
"delegates". So everyone was getting her appointments.

Mail time is off 1 hour

Posted: 21 Apr 2004 05:11 AM PDT

....and in Outlook (tools, options, calendar options)?

CD wrote: 

Exchange 2000 Distribution Groups Problem

Posted: 21 Apr 2004 01:36 AM PDT

This worked. Thanks a lot

Regard

Chris

Removing an email alias from all mail enabled objects in AD

Posted: 20 Apr 2004 01:46 PM PDT

You can use a tool called AdModify to do this as well.

--
Brandy Van Dao
Exchange Support Professional
microsoft.com

****** Disclaimer ******
This posting is provided "AS IS" with no warranties, and confers no rights.

Note: Please do NOT reply to this e-mail address. It is used for newsgroup
purposes only.


"Terry Strohecker" <com> wrote in message
news:eTMTp%phx.gbl... 
all 
a 
newsgroup 
way 

SRS

Posted: 20 Apr 2004 01:37 AM PDT

I am doing a 5.5 to 2003 migration I have installed Exchange 2003, how do I
know SRS has been installed and is setup right?

Outgoing mails problems

Posted: 19 Apr 2004 10:10 PM PDT

Hi Mcduf
Actually we were using normal DIAL Up for Exchange 5.5 with NT4 Operating System. but since a weak a go we shifted to ISDN. mails started creating problems. Now we can easily work with internal mails and ISP is not accepting any changes on their side .the error we are getting is

Your message did not reach some or all of the intended recipients

Subject: RE: test please repl
Sent: 4/20/04 7:47 P

The following recipient(s) could not be reached

Asghar, Muhammad on 4/20/04 7:47 P
Unable to deliver the message due to a communications failur
The MTS-ID of the original message is: c=US;a= ;p=Save the Childre;l=QUETTA-040420144728Z-

Just let me know that is it our Exchange servers problem or ISP problm

Thank

----- Mcduff359 wrote: ----

My first thought would be your Exchange server is pointing to an invalid DNS entry. Your ISP may have also changed a firewall setting which could stop outgoing email (we had this happen). Find out what the ISP has changed that would help

Mcduff

Microsoft Word - can't modify multilevel list style

Microsoft Word - can't modify multilevel list style

can't modify multilevel list style

Posted: 07 Nov 2012 12:12 PM PST

I went through the laborious process of attaching headings to a multilevel list style as recommended by Shauna Kelly.  When I want to change the multilevel list style, I could sometimes right click on the style in the dropdown menu for multilevel list.  However, when I right click on the style now, the only option that appears is "Remove from List Library." 

How can I modify the style?

Thank you.

New page in word opens as a tiny "mini page" inthe top left corner. I am using Officer Starter 2010.

Posted: 07 Nov 2012 10:59 AM PST

All saved documents open properly but when opening to new page it's so small you canhardly see it and impossible to use.

 

I would appreciate any help you can provide as I need this program for the work I am currently doing.

 

Thanks! 

Date field in a Word 2007 Template

Posted: 07 Nov 2012 07:54 AM PST

I have a Word 2007 template created with a field for date. But when I create a document based on that template, the date the template was created is automatically populated into the field. I would like it to show the day the document based on the template is created.

 

When I look at the properties for the field, I can format it, change the calendar type, give it a name etc. But I don't see anywhere to format what date is going to be in the field. If I can't get today's date to populate when created, I'd prefer no date be included.

 

Could someone help me accomplish this?

 

Thanks,

Christine

Text background is coloured although no highlighting is set

Posted: 07 Nov 2012 01:38 AM PST

I have a 123 page document and the Contents and all the page numbers are highlighted in grey although Highlighting is set to "None".  Completely deleting the highlighted text and ensuring formatting is set to 'Normal' but still reinserts the text with the same grey background!

I am using the Mac version of Office X Professional.

Problem with page layout view as letter

Posted: 06 Nov 2012 11:08 PM PST

I have a problem with my Microsoft Word, when I receive documents or create one then open it, the Word showed as a letter in page layout and if you choose A4 layout it didn't change the view, please what I have to do ?

What is wrong with Word Starter? When I re-start my computer, it takes all day to get Word working again! My machine keeps losing internet connection and freezing.

Posted: 06 Nov 2012 11:23 AM PST

As an advertisement for the more "complete" Word software, this Word Starter is a big loser.

How to edit the "normal.dotm"?

Posted: 06 Nov 2012 10:18 AM PST

How does one edit the "normal.dotm" document or replace it so when one opens new page the new settings are there?

Insert Symbol menu in Word 2010

Posted: 06 Nov 2012 10:16 AM PST

I recently upgraded from Word 2003 to Word 2010.

I've discovered that the Insert Symbol menu in Word 2010 is missing a few characters.

In Subset: Basic Latin, the Latin Small Letters E and O With Tilde, that were included in my old Word 2003, are missing in Word 2010.

Example: the ẽ with a tilde from a Word 2003 doc to show what it looks like.

I need the e and o vowels with tilde to use in trancribing manuscripts that were written in the 16th Century, which used those symbols. The omission of those symbols from Word 2010 seems to have been oversight, rather than a deliberate exclusion. How can it be corrected?

How can I use the Insert>Object>Insert Text File feature to insert several files at one time in Word 2010?

Posted: 05 Nov 2012 07:24 PM PST

I did it by accident once and can't seem to do it again.  Rather than inserting only one text file at a time, it is possible to use the Insert>Object>Text File feature to insert several files at a time.  I can't remember if they were bookmarked paragraphs or individual document, but I did it a few times one day and now can't remember how I did it. 

Want TOC to use the actual page numbers (not restarted section numbering)

Posted: 05 Nov 2012 12:33 AM PST

I have a document with multiple sections (created with next page section breaks) and two independent page numbering systems in each footer(numbering within each section, eg. section page 1 of 2; and the total number of pages in the document, eg. handbook page 24 of 56). For each section, the page numbering starts again at 1.

I have an automatically generated TOC which is only picking up the section numbering so it looks like I have lots of pages starting on page 1. Is there any way I can tell it to use the other footer numbering, ie. number the actual/real page numbers of the document?

FYI, the footers were created by bookmarking each section A, B, C, etc. and then,

Page { page } of { pageref {section \* Alphabetic } }

for the section numbering and then

{= { pageref A } + { page } } of { numpages }

for the total page numbering, adding pageref B and so on as the sections progress.

Whilst the footer numbering is complex, the TOC numbering needed is the actual/real page numbers of the document.

Any help greatly appreciated. (While it would be possible to manually alter the page numbers after autogeneration of TOC, this is a document that will need to be maintained by a third-party and it is already quite complex. Ever hopeful of some wisdom out there.)

Problems with saving selection to header (and quick parts) gallery

Posted: 04 Nov 2012 06:15 AM PST

I created a header in my document by going to Insert/Header and choosing 'Austere (Even Page)'. I filled in the date field and title field like it asked me to, hit CTRL-A to select all of the header, and saved selection to header gallery as 'Company Header' (and the thumbnail of my new header--with date and company name filled in--does appear under the 'General' section of this gallery).

I saved my document and then tried to insert this new header into a new document but my date and company name did not show up--it's just the formatting with 'Pick a Date' and 'Type Title', as if I had never filled in those fields.

Since this header was created from Austere (Even Page) I tried inserting my header on the second page, thinking it only works on even pages, and I still had the same problem. I tried saving this header as a Quick Part as well, thinking it needed to be saved in the header gallery and the quick parts gallery, but when I tried to insert header it still did not work. Nor did it work when I tried to insert the header via Quick Parts.

What is wrong? Quick Parts has worked before and so has something I saved to a page number gallery.

I would appreciate any help. Thank you.

I need to install the word program that was installed on my previous computer which is now ruined. i need to know how to cancel it so i can put in my current device?

Posted: 01 Nov 2012 05:06 PM PDT

I need to install the word program that was installed on my previous computer which is now ruined. i need to know how to cancel it so i can put in my current device?

Excel 2010 Mail Merge Issues (creating labels)

Posted: 01 Nov 2012 07:47 AM PDT

List contains address1 and address2 when merged to Word, address2 is not suppressed when blank and only one label appears per page. I know there is code for this not sure where and how to enter it. HELP!.
Subscribe to: Posts (Atom)