Pages

Search

Want seperate mailboxes for user1@CompanyName.com & user1@OtherName.com - Microsoft Exchange

Want seperate mailboxes for user1@CompanyName.com & user1@OtherName.com - Microsoft Exchange


Want seperate mailboxes for user1@CompanyName.com & user1@OtherName.com

Posted: 16 Dec 2005 12:37 PM PST

What version of Exchange?

From account properties remove the second address, uncheck "Automatically
update e-mail addresses based on recipient policy"

Create new account with another username, in user properties | E-mail
addresses assign the second address. Remove the default address stamped by
Recipient policy and uncheck "Automatically.... "

Assign the user permissions to the new user account/mailbox.
--
Bharat Suneja
MCSE, MCT
www.zenprise.com
blog: www.suneja.com/blog
-----------------------------------------


"Oscar Vogel" <net> wrote in message
news:phx.gbl... 


Bringing ISP e-mail in house

Posted: 16 Dec 2005 03:05 AM PST



In news:com,
MMucher <microsoft.com> typed: 
You're welcome.
 


anti-spam quesiton

Posted: 15 Dec 2005 07:30 PM PST

We use an external mail filtering service called mxlogic which is very good,
they also provide an added layer of security by doing a virus scan on
incoming mail and with the fail safe option if your exchange box goes down
they will store your mail for 5 days with unlimited disk space which is a
major plus from a CYA aspect. and the best part is you do not have to try to
keep up with the spammers they do it for you and it is relatively in
expensive. check'em out

"Hii Sing Chung" wrote:
 

Unable to remove mail header

Posted: 15 Dec 2005 12:19 PM PST

"David DeBoer" <com> wrote in message
news:%232C$phx.gbl... 


Put Outlook into offline mode, exit, reload Outlook, and then try deleting
the item while you are still in offline mode. Then go back into online
mode.

I haven't bothered to understand much about cached Exchange mode. Try
disabling it in Outlook, exit, and reload to see if the Inbox looks correct.
Cached mode downloads a copy of the message so it locally available when the
Exchange server is down or unreachable (i.e., rather than fix a flaky or
too-busy Exchange server or network, they use cache mode to cover up the
faults). With cached mode off, Outlook shows you want is in your mailbox on
the Exchange server. In cached mode, the local copy has to be stored
somewhere. My guess is it is in an .ost file. So you could hunt around for
the .ost file to delete/rename/move it to start with a new one. You
probably should talk to our Exchange admin on what to do with the .ost file.


Exchange delivery problems

Posted: 15 Dec 2005 12:10 AM PST

Thanks so much for your help!

"Rich Matheisen [MVP]" <com.NOSPAM.COM> wrote in message
news:com... 


exclude administrator login to OWA ?

Posted: 14 Dec 2005 11:51 AM PST

The only thing defined under Exchange Features is Instant Messaging, and
that's disabled.

I've now been told that OWA acces can be disabled through IIS, rather.



"Mark Arnold [MVP]" <org> wrote in message
news:com... 


LDAP help needed

Posted: 14 Dec 2005 10:08 AM PST

try using OLDCMP from joeware.net
(http://www.joeware.net/win/free/tools/oldcmp.htm)

--
Cheers,
# Jorge de Almeida Pinto #
BLOG --> http://blogs.dirteam.com/blogs/jorge/default.aspx
-----------------------------------------------------------------------------
* This posting is provided "AS IS" with no warranties and confers no rights!
* Always test before implementing!
-----------------------------------------------------------------------------
"Clayton Sutton" <com> wrote in message
news:ev$phx.gbl... 


Optimize Memory Exchange 2003 DC

Posted: 14 Dec 2005 10:05 AM PST

On Thu, 15 Dec 2005 08:11:05 -0800, Harry Piedra
<microsoft.com> wrote:
 

Other than not installing Exchange on a DC? :)

 

Hide from address book question

Posted: 14 Dec 2005 06:51 AM PST

Hiding an account from the GAL doesn't make it any less functional. Using
the legacyExchangeDN should allow you to do anything Exchange-related,
though I haven't tried it with OWA yet (I'll try it and post back later).
For Outlook, the procedure is the same for setting up a profile as it is for
adding a hidden mailbox as an additional mailbox. It's all about the
legacyExchangeDN.

--
Ben Winzenz
Exchange MVP
MessageOne
Read my blog!
http://winzenz.blogspot.com
http://feeds.feedburner.com/winzenz (RSS Feed)


"Clayton Sutton" <com> wrote in message
news:phx.gbl... 


Public Folders in ESM?

Posted: 13 Dec 2005 01:06 PM PST

"Steele" <net> wrote:
 

It doesn't have to be the first AG, that's just where it winds up if
you haven't moved it somewhere else. :)
 

Domain admins aren't Exchange Full Administrators. And Domain Admins
have "deny" ACE's to keep them from doing things they only *think*
they should be able to do.
 

Try it with a user that's an Exchange Full Administrator.
 

The way you did. But the PFMigrate doesn't actuall migrate a thing --
it just adds the replicas to the folders properties.
 

Where you you run it isn't so important as who runs it. :)

--
Rich Matheisen
MCSE+I, Exchange MVP
MS Exchange FAQ at http://www.swinc.com/resource/exch_faq.htm
Don't send mail to this address mailto:com
Or to these, either: mailto:com mailto:com mailto:com

OWA...

Posted: 13 Dec 2005 12:01 PM PST

And where might I locate these "portal solutions?"

Thanx.

"Mark Arnold [MVP]" wrote:
 

Microsoft Word - Not a valid Win32 application

Microsoft Word - Not a valid Win32 application


Not a valid Win32 application

Posted: 26 Jan 2014 02:18 PM PST

Hi!

I'm using Office 365 Home Edition and I can't use Microsoft Word.

Each time I click a Word document or if I try to start Word, I get an error message saying that it's not a valid win32 application.

I have uninstall and reinstall Office, but it change nothing.

Others applications work fine. This problem only happen with Word.

My OS is Windows 7.

Thanks!

MSOffice2010 Professional

Posted: 26 Jan 2014 01:56 PM PST

I have MSOffice2010 Professional.  When we try to save in Word or Excel, we can't.  We get the message that the program (Word or Excel) has stopped working.  I checked to see that the program has been activated and did a program repair, but it still isn't working.  Any advice?

I am trying to insert page numbers starting on the second page, bhut when i do i nsert page numbers the other pages have the EXACT SAME NUMBER AS THE FIRST!!!!!! HELP!!!!!!!!!

Posted: 26 Jan 2014 12:57 PM PST

I am having a really crazy time in trying to insert a starting number on the second page, (word 2013) and when it is inserted the other pages have the exact same number on them as well. I have tried several times and it is very frustrating too. please help!

Document Recovery of Unsaved Files in Word 2010

Posted: 26 Jan 2014 11:27 AM PST


I have an issue when you are closing an unsaved file and trying to recover a .asd file in unsaved files. When you make a change to an existing document and close without saving the .asd file should show up 2 places instead of navigating to one. When I go to Manage Versions and Recover Unsaved Documents nothing is displayed in the screenshot above. How do I make sure .asd files get displayed here and not navigate tot he Roaming Word Folder?

Removing page numbers

Posted: 26 Jan 2014 10:46 AM PST

Trying to remove the page numbers from a document in MS Word. The help instructions say "click insert, click page numbers, click delete page numbers." Simple enough, but when I do this nothing happens - the numbers remain. Any suggestions?

Auto correct word 2010

Posted: 26 Jan 2014 10:30 AM PST

I have about 30 middle school students and I want to prevent them from editing or adding words to auto correct, without disabling it all together. Any help you con provide will be great.

This error usually occurs because of macro security settings.

Posted: 26 Jan 2014 06:31 AM PST

I open the words and appear error for macro. this is pictures for macro error.



what's the meaning ??




having problems installing microsoft home and student 2010

Posted: 25 Jan 2014 11:16 PM PST

I have purchased cd but have already used product key three times due to problems with pc.How can i get new pruduct key or must i buy new cd?

Office 2013 autoformat

Posted: 25 Jan 2014 10:41 PM PST

Im using office 2013 and am having a problem with auto format. Every time i type this:

a.
b.
c.
d.


It will keep on going and would like to turn that part of it off completely.I went into the settings, but not sure which one to turn off.Its just kinda irritating because i cant copy and paste the a,b,c,d which is part of what im writing.Just want it to not predict it at all. thanks

How To Use English and Hindi In MS Office 2010 Home and Student

Posted: 25 Jan 2014 09:26 PM PST

Hello


       I am    looking  for  a    solution  on  how to  use    both    English    and    Hindi   in    Microsoft  Office 2010 Home and  Student what   and   how  to  do     so  that  I  can   use both  languages  and if I am  right    changing    the  language  for   1 program     will affect all  other  programs  if I  switch    to Hindi  in  Word    even  Excel   PowerPoint  and  One Note  will     change  Something     I   am  not currently able to   do  as of     Dec 2013Please   HELP


Thank   You

Fillable forms for History and Physicals to be used in a hospital

Posted: 25 Jan 2014 05:12 PM PST

Help! I am a doctor who needs to create a Word fillable form for histories and physicals to be used by myself in our hospital when I admit a patient. I have learned how to create the HandP template document, add the appropriate combo boxes and free texts boxes and create the "clean" template. Indeed, I have created several H and P templates (created on my home Mac with the Mac version of Word 2010) that will work.


I have worked with our IT department and the EMR people, and all is OK regarding security.

 

The trouble is how do I then copy and paste the template document, after it is edited for the patient, WITHOUT those ugly gray boxes? In other words, I wish to see a patient,  open a virgin document, make quick patient-specific changes to the document using the tab key to move quickly to the combo and text boxes, then copy, and paste without having the gray boxes in the final "pasted" document. Also, is there a way to do this without having to first protect, then unprotect the document, then protect it again??? Any help and resources appreciated!

 

Email from Word on Asus T100

Posted: 25 Jan 2014 04:20 PM PST

I have an Asus T100 running Windows 8.1 with Office 2013 Home and Student Edition.  When I try to share a Word document as an email attachment, it tells me I do not have a default email program.  I do, and it is the email client that came with the device and it is set as the default email program.  If I try to send it again, I get "Word couldn't send mail because of MAPI failure: "Unspecified error".

Thoughts?

defragmenting? - Forums Linux

defragmenting? - Forums Linux


defragmenting?

Posted: 20 Oct 2005 10:24 AM PDT

-----BEGIN PGP SIGNED MESSAGE-----
Hash: SHA1

com wrote: 

<question mode="rhetorical">

Why would you want to defragment a filesystem?
What benefits would you get from defragmenting a filesystem?
What drawbacks are there to not defragmenting a filesystem?

</question>
 


- --
Lew Pitcher
IT Specialist, Enterprise Data Systems,
Enterprise Technology Solutions, TD Bank Financial Group

(Opinions expressed are my own, not my employers')
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.2.4 (MingW32)

iD8DBQFDV946agVFX4UWr64RAuovAKC507IY+pq/6sUQ2HHXnwlVEZtq/wCg8C98
1qH0EOhYOLqPIWYEhE0bVX4=
=6Z0g
-----END PGP SIGNATURE-----

Switching off the box after shutdown

Posted: 20 Oct 2005 04:01 AM PDT

-----BEGIN PGP SIGNED MESSAGE-----
Hash: SHA1

Daniel Böhmer wrote: 

Outside of enabling the kernel support, you'll also need to
- - ensure that the apm module is loaded (if you use loadable module support), and
- - ensure that the apmd daemon is running

- --
Lew Pitcher
IT Specialist, Enterprise Data Systems,
Enterprise Technology Solutions, TD Bank Financial Group

(Opinions expressed are my own, not my employers')
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.2.4 (MingW32)

iD8DBQFDV4j2agVFX4UWr64RApG2AJ0dNUkWia7rVA6AFPqzDq Li6X+cMgCfaWVM
g0++xNn1hlD8HKmZm+EeZbI=
=ce+t
-----END PGP SIGNATURE-----

Kodak DVC325 webcam driver?

Posted: 19 Oct 2005 11:36 AM PDT

Lew Pitcher wrote: 

Thanks Lew; I don't know why my searches never showed that. I have downloaded it
and will try it out..

What can I check to fix system performance?

Posted: 19 Oct 2005 10:47 AM PDT

On Wed, 19 Oct 2005 19:47:42 +0200, tuxworks <com> wrote: 

Are these memory data taken while the system was running that make?

If so, it seems you have plenty of memory available: 3.5 Gbytes.
Also notice the amount of swap usage: In: 0, out: 0.

(When the kernel does not need the memory for anything else, it keeps
copies of files you have read of written lately, in a cache, in case
you access them again. That makes it look like that there is never
much memory free, but you should really consider "cache" as equivalent
to "free" - except a resonable amount matching the amount of cache
hits per 10 seconds or so.)

The next time you post data, please do not use Google to post.
As you see above, Google breaks the lines, making it very hard to
read this kind of tabular data. Since you obviously have access to
Linux computers, get a newsreader. Myself I am using Opera, and,
well, not bad, but not perfect, some frustrating bugs and limitations.
I see people are talking about Pan, and I am considering giving it
a try. I used Gnus (standard part of Emacs), quite good, but the docs
are horrible: They try to be good, but unless you know the lingo,
there is no hope. And no, you don't know the lingo.

As newbies go, you are unusually well behaved, posting a selection
of data. Good! Unfortunately (and you are are aware of it,it seems,
you hint at it) this problem is quite difficult and needs much more
data and a bit of thinking and asking and replying.

Myself I am among the less expert in tuning issues, so I hope others
will join in with suggestions, but here are my first reactions.

Is it possible that the increase in time is due to changes in the
software package or its makefiles?

Builds can usually be made a lot faster by adding some "-j" options
to make commands. This is true on uniprocessor systems too. I saw you
said your system has 4 CPUs, then consider having at least 16 processes
running, four per CPU. Quite likely, the optimum is closer to 10
processes per CPU, or 40 in all. (This is based on my own experience,
but that was with a very different kind of systems about 10 years ago.
If other readers on this list know differently and specifically for
Linux systems or modern systems, please speak up.)

However, this has to be done judiciously. It is far from trivial to do.
But I brought a build down from 30 hours to 13 that way. (Back then
gmake did not have "-j", so I hacked a version of bash that allowed me
to run 300 processes with "&", and the shell would only issue as many
processes as I allowed in a special variable, and automatically issue
another from the queue when any process terminated. I found 25 gave good
results. I did not really experiment with it, I just was so happy to
come down to 13 hours. But I believe the OS in question was more geared
for batch processing than is customary today, that is why I would
consider trying first with lower numbers per CPU.)

Consider the disk structure. See if you can arrange that the build
reads one disk while it writes another. This measure and the -j option
measure win time taken from the same pool: each measure can, with luck,
give great returns, but when both are applied, the second one does not
win nearly as much.

First of all learn more about what is going on when the system is
loaded. Run "top". By default the list is sorted with the processes
that use more CPU at the top. If the system becomes memory or disk
constraned it is better to sort by other columns. Hit the ">" key.
Then the list gets sorted by the next column, %mem (rather than %cpu).
Play with ">" and "<". Do "man top" to learn about displaying other
columns with other kinds of data.

Take some snapshots by copying and pasting into an editor. (Since you
are new to Linux, do you know the Unix way of copying and pasting?
There is no "Ctrl-C Ctrl-V", but just mark what you want to copy,
and *middle*-click where you want to paste. You do have a mouse
with three buttons? or you have configured the trick of using both
buttons at once to emulate the middle button?) If you need more time
between screen updates (default 1 second), find the commands to change
that.

In the head part of the "top" screen, look at the "%wa" item in the
Cpu(s) line. It measures the time the CPU is waiting, mostly this is
disk wait. Notice that this is different from idle.

Tell us about the disks your system has. Is the system using any
network mounted storage? If so, we will need data about the network
performance too.

Be specific. If you are using sotware raid or logical volumes, use
the tools to list the complete configuration and post it. Also post
the output of "fdisk -l /dev/hda" and similarly for the other disks.
You probably have most of your data on scsi disks or harware raid
units, use the appropriate tools to list the partitioning (if
applicable) and setup. Post the file /etc/fstab, and tell us what
mount points contain the source file tree. If the build tree is separate
from the source tree, tell us what mount point contains it.

If the build writes files in the source tree, consider if you can
modify the build process to have a separate build tree where all
but the pristine source files are written. Then consider using a tmpfs
to hold the build tree. This means the files are mostly not written
to disk at all. The "make install" step should write the final results
to a disk-backed file system, of course.

-Enrique

RH ES4 update 2 installation on a HP tc4100 with NetRaid1 card

Posted: 18 Oct 2005 12:13 PM PDT


"Jean-David Beyer" <com> wrote in message
news:supernews.com... 

Yes, it's a *86. I'm trying the 30 day trial from their website which
includes just the software without support, So I thought this was the right
place to ask about installation issues.


Mysql

Posted: 18 Oct 2005 11:10 AM PDT

On Tue, 18 Oct 2005 20:10:51 +0200, test
<nl> wrote: 
You don't run udeb files, you install them. .udeb files are used in the
initial installation process, after that you install .deb files using
dpkg, apt-get, aptitude or synaptic.



--
"I have just one word for you, my boy...plastics."
- from "The Graduate"

writeable ntfs

Posted: 18 Oct 2005 07:39 AM PDT

On Tue, 18 Oct 2005 16:39:53 +0200, Abanowicz Tomasz <pl> wrote:
 

Linux NTFS support had a sad history of problems, and it was almost
given up until a new rewrite recently was included in mainline. I am
not sure of when that happened, it may have been as late as 2.6.13.

Due to all the problems, the previous version was crippled to write
only inside existing files, that is, only when it was not necessary
to alter the metadata structure. That means no new files, no renames,
no moves, no append, not even delete. It was essentially a read
function turned ont a write.

Due to license fears and other issues, distributions may or may not
include the new ntfs code in their kernels.
 

I don't know what error number the old ntfs would use to say "no"
to unsupported operations.

---

By the way, I saw you got an answer from Peter Breuer (Hello Peter!)
but for some reason it was not threaded with your post. It seems to
contain approximately the same information as I give you here, but in
a different style. If you haven't read it yet, his posts are best
read wearing red glasses and a crocodile skin. If you already read it,
be honored, it is much more friendly than many others. He appears
(in my view) to be working hard to become more friendly and informative,
although we may differ in our interpretation of pedagogical issues.

Good luck,
Enrique

Corrupted persistent superblock - repairable?

Posted: 18 Oct 2005 07:37 AM PDT

Enrique --

Thank you for your reply. It worked perfectly! Thanks for your help. :-))

Best,

Rohan Beckles
net

--
ASUS PC-DL Deluxe
Intel Xeon @ 3.06GHz (dual)
Corsair TwinX2048-3200C2-PT
Western Digital WD2500SD (dual, RAID1)
ABIT Siluro Ti4200-8x DOTH 128MB OTES

Linux tool can do email with attachment from command line

Posted: 17 Oct 2005 08:38 PM PDT

Matt Payton <com> writes:
 
 

So, install it.
 

Pine?

 
 
 
 

Fedora 3/Windows Problem

Posted: 17 Oct 2005 06:10 PM PDT

I used the grub disk and reconfigured the grub configuration file.
Thanks for your Help, I really appreciate it.

Driver update available for Suse 9.1 (kernel 2.6) to resolve problem loading windows with GRUB

Posted: 17 Oct 2005 04:24 PM PDT

I was only trying to be useful here......

CD7DVD burner k3b damaged

Posted: 17 Oct 2005 07:18 AM PDT

Enrique Perez-Terron schrieb:
 

Hi Enrique -
 

thank you for the answer.

The subject line had been damaged also. :-(
It should read

CD and DVD burner software k3b damaged

which means the Linux software k3b.
k3b is a CD and DVD burner for Linux working with KDE
or GNOME. It is delivered with the SuSE distribution
of Linux (Now the german company is bought by Novell).
 

No, it is no port from Windows but developed for Linux.
I am not very much skilled in the Linux system but
want to learn and use it. That's why I could not find
any solution for that software problem.
I will check your hints this evening and tell what I
found.

Regards Udo

Linux, Windows Dual boot problem with GRUB

Posted: 16 Oct 2005 07:17 PM PDT

On Tue, 18 Oct 2005 01:21:35 +0200, Kunal <com> wrote:
 

Thanks for your report, I was not aware of it.

-Enrique

Can't used parted to resize recent ext2 partitions, what has changed?

Posted: 16 Oct 2005 10:19 AM PDT

On Mon, 17 Oct 2005 23:56:36 +0200, Chris F Clark <TheWorld.com> wrote:
 

Oh yes, don't remind me about that. :)
 

Consider not using parted, but resize2fs, combined with fdisk, and
possibly dd.

Or consider relabeling the partition again after the move. It takes
(quite) some time, but should not be problematic.

With fdisk you can control the exact sector number each partition
starts on, and the size of each partition in sectors.

Two caveats: Apart from the flexibility, the documentation and the
interface is *bad*. Take valium first. Explore the 'm' and 'x'
commands. Sometimes fdisk tells me the kernel failed to adjust
it's idea of the partition table afterwards. I have no idea what
is happening then, but rebooting always forces the kernel to
learn the new paritition sizes. Until then do not mount anything,
and do not write to the new partitions through eg. /dev/hda8,
use only /dev/hda, which does not depend on the partition table.

Second: Changing this data does not change the data on the disk,
so you must be very methodical and write down the contents of the
partition table before you do any changes, so you can set things
back if something goes wrong. If you move the start of a partition,
you must separately move the contents of the disk sectors.
And remember, if you want to shift the sectors UP, e.g from 100000 -
129999 to 110000 - 139999, then you must copy the last sector before
you overwrite it! (I have never done this, and don't even know if
I know of a tool that will move sectors in reverse order. But in the
above example it would be enough to copy 120000 - 129999 to 130000
- 139999, then 110000 - 119999 to 120000 - 129999, and then finally
100000 - 109999 to 110000 - 119999, three dd commands.

A third caveat: for what I know, parted perhaps does exactly what
I am suggesting, and fails because resize2fs does not yet handle
the newest attributes. I don't know if this is the case, I just
fantsize.

-Enrique

Microsoft Word - It has now been two weeks since I have been able to use Microsoft Office Home 365

Microsoft Word - It has now been two weeks since I have been able to use Microsoft Office Home 365


It has now been two weeks since I have been able to use Microsoft Office Home 365

Posted: 25 Jan 2014 01:52 PM PST

Hey to all you 365r's,

Does anybody have a solution to another one of Microsoft's new OS (only kidding).  I don't know what to think about this problem.  I am tired of not being able to enjoy my computer.  No, I do not have an IT Certificate, but  I think owning a Microsoft product should require that you have one.  It is bad enough, that we don't get paper manuals anymore.    Oh, I love Microsoft, don't get me wrong.  I really was enjoying Office 365 until it had a meltdown.  So far, the  Office 365 on my new 27" Imac looks beautiful and a bit different than Microsoft.  It looks kind of classy on the Imac. 

I have owned Windows cpu's since they were born.  I could never understand why my daughter, a creative designer only used Apple computers.  Now, 15 years later, she has done more creative, constructive, and has fun on her machine than I have on mine.  I know I am going to get a lot of different responses with this email, but hey isn't there something called "freedom of speech" well, knock yourself out, but if you have come up with a solution on how to get this working again, please let me know. 

Thanks you all, and have a wonderful day,

Autorecover HELP HELP!

Posted: 25 Jan 2014 01:42 PM PST

So, I was in the process of writing what is probably the most important word document i've ever typed. As I went to save (I know i should have before but I was so into it i didn't) the Save dialog froze and the Not Responding thing came up. I chose to restart the programme and two autorecover files appeared. One was from ages ago. The other was from 21:26 (it crashed at 21:25 strangely). I clicked on it but an error dialog came up saying the  .EXE file 'could not be opened'. I clicked okay and it was lost. Tried reopening word and that auto recover had gone. I'm using Office 2010 on Windows 8.1 and I looked under Recent>Recover Unsaved Documents but the folder was empty.

Could someone please help me find it in temp or ~ files as I'm so upset right now? :(

Word 2013 print date and path

Posted: 25 Jan 2014 01:05 PM PST

In the past I could print the date and path on each word document that I create with one click.  I have been attempting to set this up in Word 2013 but cannot  figure out how to do it.  Does anyone know how to do this so with one click I can insert a header which will have the date and path in each new document?

Hidden Frames or Pictures in Word doc

Posted: 25 Jan 2014 12:14 PM PST

I seem to have a bunch of hidden picture frames or text boxes or something in a Word 2010 doc. I tried searching for them with ^g and it appears to find them but I can't see them. Even if I highlight the page, they don't always show.

I also tried this VBA code to remove them but they're still there.

Sub RemoveFrames()
Dim frm As Frame
For Each frm In ActiveDocument.Frames
frm.Delete
Next frm
End Sub

Any suggestions would be very much appreciated.

Multilevel numbering will NOT work even with all the right boxes checked AND ListGal.dat deleted in both vers. 210 & 2013

Posted: 25 Jan 2014 11:34 AM PST

Hi, I am having the same problem (in Office 2010 & 2013) that Word will not automatically update the multilevels upon entering and tabbing.  A work around is entering and tabbing to the next spot and then clicking on the multilevel button and then the multilevel of choice-EACH TIME I change to a new level.  I know it worked previously last year on the 2013 because I typed a ML research paper for a kiddo and taught them how to do it.  Now it is not working on either machine. ?????

I checked with MS online help and it said to make sure that the Automatic number/bullets list checkboxes under Options/Proofing/AutoCorrectOptions/AutoFormatAsYouType/ApplyAsYouType are checked.  They were.  So I unchecked them, closed Word, restarted computer, restarted Word, checked them back on, closed Word, restarted computer.  Still not auotmatic updating.  

So I then checked what Stefan Blom and others suggested:.  To check the box for Set left and first indent with tabs and backspaces, but it was already checked.  Repeated the procedure above as with the other checkboxes but again with no success.

Even tried Stefan Blom's suggestion:  ... However, you may want to start by exiting Word and deleting the ListGal.dat file in your user profile, just in case.

You'll find the file in the %appdata%\Microsoft\Word folder. To open the folder, hold the Windows key as you press R; in the Run dialog box, type %appdata%\Microsoft\Word and press Enter.


Without success either....


Any further suggestions?  Thanks, ToBT

Office 365 Home Premuim - Word and Excel 2013 Lagging and shows not responding

Posted: 25 Jan 2014 10:57 AM PST

Hi ...

 

I have here a Sony Vaio laptop connected to home network via wireless (Broadcom).

No problem with internet surfing or streaming. No issue with networking experience.

 

However, when I launch Word 2013 or Excel 2103 (only 2 applications I used commonly), it started up and display the usual template selection.

From here onwards, it starts to lag and show either Word or Excel not responding.

It lags and for every click or character I type it takes awhile for it to change or display.

I cannot get much done.

 

Can someone help me with this.

Thanks in anticipation.

 

Regards,

Mahmood Ahmad

Word crashed every time i try to make this macro

Posted: 25 Jan 2014 10:48 AM PST

the macro involves
image previously selected (pause recording to select images)
  1. go into size and position menu
  2. change size to 6
  3. add .1" to wrap menu for space under image
  4. lock anchor
  5. hit ok...this is when word crashes

Defaulting focus to a custom tab in Backstage?

Posted: 25 Jan 2014 10:13 AM PST

I've added a custom tab (Corporate tools) to the Ribbon and a custom tab (Informations requises)  to the backstage of an addin (MyCorporateRibbon.dotm) I created.

I placed the Ribbon custom tab first (before the Home tab) so it gets focus by default the way the Home tab usually has it and I placed the Backstage tab at the top (insertBeforeMso=TabInfo) so it has focus by default (the way the tab Informations usually has it) when no other behavior is specified (when you open Word, its Recent that has focus, when you click on the QAT print preview its Printing that has focus, etc.)

It does behave like that but only from the SECOND show of the backstage .

Example:

1) Launch Word
2) Go backstage: Recent tab is selected (thats normal); select a document from the list.
3) Go backstage: Information tab is selected
4) Click on any other RIBBON tab (ex: Insert)
5) Click on backstage: Informations requises (custom tab) is selected

From now on, it remains the default if no other normal behavior preceeds. Unless you open another document or create new on. In which case we are back to #3.

Example2:

1) Launch Word
2) Go backstage: Recent tab is selected (thats normal); click new document OR staying on Corporate tab (which has focus because its the first tab on the Ribbon) use the new document button to create a new document (from whichever template you fancy)
3) Go backstage: Information tab is selected
4) Click on any other RIBBON tab (ex: Insert)
5) Click on backstage: Informations requises (custom tab) is selected

From now on, it remains the default if no other normal behavior preceeds. Unless you open another document or create new on. In which case we are back to #3.

I do not understand why it does that but clearly, something does not initialize at the right time....

Is there a way to bypass or catch the events open document or create new so that it gets to the #3 right away. I want my user to see the custom tab the first time it goes backstage of a new document or a newly opened document.


How to Convert handwritten hardcopy notes into accurate editable-text-soft-copy notes magically direct automatically????????????

Posted: 25 Jan 2014 08:27 AM PST


How to Convert handwritten hardcopy notes into accurate editable-text-soft-copy notes magically direct automatically????????????

MY QUERY-----WITHOUT TYPING READILY, HOW EXACTLY CAN WE CONVERT INPUT MANUAL HANDWRITTEN  SCRIPT (ACCOUNTING/ FINANCIAL NOTES) DATA SCANNED DOC. DIRECT AUTOMATICALLY INTO OUTPUT SOFT-EDITABLE TEXT (APPLICATION) FORMAT FOR MICROSOFT OFFICE PROJECT???-------AS SIMILAR TO----ONE NOTE TECH APPLICATION??? 

Dear Sir/Mam
            I want to convert my handwritten accounting hardcopy notes (manual handwritten hardcopy notebook) into complete exact accuracy editable-text-soft-copy notes such as it should be able to change numbers,figures,totals, formulaes,capture data from forms,documents.Software should correct & eliminate till zero errors such as spelling mistakes, corrections uptill perfection as like in Ms Office-Word, Excel, Powerpoint, etc. 

I WANT AN SOFTWARE FOR FUNCTIONING (ATTRIBUTE PROPERTIES) AS INPUT-TO EXTRACT THE ACCOUNTING-INFORMATION-DATA BY IDENTIFYING-RECOGNITION OF MENTIONED MANUAL HANDWRITING  (NON-EDITABLE)  NOTES SCRIPT FROM A SCANNED HARD-COPY AND FINALLY TO GET IT CONVERTED  DIRECT AUTOMATICALLY INTO AN ACCURATE OUTPUT-SOFT-EDITABLE TEXT-COPY-APPLICATION FORMAT.

I WANT TO HIRE AN SOFTWARE (E-COMMERCE) DEVELOPER FOR STANDARD HANDWRITING RECOGNITION SOFTWARE FOR TO CONVERT EXACT-ADVANCED INPUT SOLUTION FOR MANUAL HANDWRITTEN SCRIPT (NON-EDITABLE ACCOUNTING/ FINANCIAL  NOTES) DATA  DIRECT AUTOMATICALLY INTO SOFT-EDITABLE TEXT APPLICATION FORMAT.

IS ANY MICROSOFT OR 3RD SOFTWARE OR OTHER GADGET RESOURCES AVAILABLE OR HELPFUL ME FOR THIS???????????????????? IS IT POSSIBLE???????????????????????? 
IF YES PLS.. CALL ME EARLY AS I'M REQUESTING TO SUPPORT ME??????? 

CONTACTS:
GIRISH WADHAWA (INDIA), 
*** Email address is removed for privacy *** 
Mobile: <removed>
INDIA (ASIA).
   

Office Word

Posted: 25 Jan 2014 08:00 AM PST

Since the latest update, I have to re-install Word 2007, and Word 2010 every time I open a document.  My troubleshooter says my programs are incompatible, but offers no help in becoming compatible.  What's going on and how do I fix this?

Using Ms Office Home at work

Posted: 25 Jan 2014 04:08 AM PST

I'm struggling to find a definitive answer as to whether this is an option or not? 

At work all of our computer's use ms Office Home version... Some 2007, some 2010. Some Window's 8 some 7...Though I don't see how that would make a difference 

Just wondering what the policy was on this and whether anyone could link me to the information? 

Cheers

Problems with printing 8 pages on one sheet - margins seem askew and uneven?

Posted: 25 Jan 2014 03:41 AM PST

I'm attempting to print an A7 book - that is, 1/8th of a normal A4 piece of paper - and I did a test print of the first 8 pages, using Microsoft Word's "Print 8 pages on one page" feature - however, when they printed out, the spacing between the pages was uneven, with a greater gap to the left of the page, meaning when the signatures were folded and put together, the spacing between them was off, and looked untidy. Some pages were further towards the top, some towards the margin, some towards the bottom - it just looked extremely unprofessional. Therefore, I ask - is there any way of fixing this so that they are all EVENLY spaced across the page, so they can be cut to small A6 signatures of 4 pages, without there being any bizarre unequal spacing issues?

All office 2013 applications open with no menu bars, no ribbon and no tabs. How do I get them back?

Posted: 25 Jan 2014 03:05 AM PST

When I open say word I get a very bland screen with a narrow blue menu bar at the bottom that just lets me flick between 3 different views. There is no menu bar, no quick access bar, no tabs and no ribbon.  I can't format, print or anything.  How do I get them back?  I have tried ctrl F1 but that does nothing.  This makes all the applications unusable and I need some help please.

Microsoft Home and Student 2007

Posted: 25 Jan 2014 02:04 AM PST

When I attempt to open any Word document it requires me to wait whilst it configures, extremely frustrating and time wasting, how can I resolve on a Windows XP SP 3 system ? I have attempted repair using disc but problem still persists. How can I resolve ?

"Print custom range" does not work properly in Microsoft Word 2010

Posted: 24 Jan 2014 10:42 PM PST

"Print Custom Range" dos not work properly in Microsoft Word 2010.  I input for pages: 1, 3, 5, 7 and got only pages 1 and 5.  I repeated this process after Restarting the computer and once again printed only pages 1 and 5.  Does anyone have a solution?

 

My configuration:

Windows 7, Professional -- Service Pack 1

Installed RAM:  4.00 GB

32-bit Operating System

Microsoft Word 2010 Version: 14.0.7106.5003

 

 

Microsoft Support Engineer, Ratandeep replied on December 12, 2013:

Please post your query in Microsoft office forums.

Note:  Original query posted to Microsoft Windows forums on October 23, 2013

Additional information since original post:

  1. Printer is: Ricoh Aficio SP C210SF. <Multifunction Color Laser Printer/Scanner/Copier>

  2. Downloaded latest driver <"new driver"> from Ricoh web site:

  • New driver and old driver gave identical results on all documents tested:

Conclusion:  Problem unlikely to be a driver only issue.

  1. I have recently tried the Print Custom Range on numerous Word documents and found the following:

  • All documents print properly except those containing an "Attachment 1".  Attachment 1 is a four page graphical representation of information from a web site taken several years ago.  I did redact the original document to remove sensitive but unclassified information from it and it is under the file name "Test Document - 22-Jan-2014".  When I tried to print pages 1, 3, 5, 7  I print only pages 1 and 5 just as originally reported.  I do not want to make Attachment 1 available to the general public at this time.  I want to make the original non-redacted version of the Test Document public in the near future because it impacted over 98% of the voting public.  I am sure the Microsoft software engineers will be able to resolve the Print Custom Range problem with my "Test Document - 22-Jan-2014".  How do I go about sending this "Test Document - 22-Jan-2014" privately?

 

Thank you,

 

Bill Wise

24-Jan-2014

 

Surface RT, Word's Multilevel list Troubleshooting

Posted: 24 Jan 2014 10:01 PM PST

I was working on a paper and I selected the multilevel list option that way I didn't have type up the numbers each time. At first it worked great but now for some strange reason everytime I select the multilevel list option, the first number appears but after it does not continue. I was wondering if any of you know how to fix it that way everytime I press enter, the number continues on.

                                                                                         Thank You

What's the best way to paste images/ diagrams from PDF file into MS Word 2010?

Posted: 24 Jan 2014 09:48 PM PST

Hello

What's the best way to copy images/ diagrams from PDF files and paste into MS Word 2010? Thanks.

every time I open MS Word 2010 or Excel in fact any office app (but not Outlook) Windows Installer pops up

Posted: 24 Jan 2014 07:54 PM PST

Pop-up with "Please wait while Windows configures Microsoft Office Single Image 2010". That slows down the productivity and is quite annoying! It seems to come after some kind of win update. Also it did happened once before. Don't remember how did I fix it but it was (I think simple as use the Windows FixIt). Tried fixit this time - No success.
Computer background: Win7 Pro, 32bit, MS Office Professional Plus 2010, and MS Office Home Business 2010 showing in Programs and Features, and most typical apps nothing special. I have done already research here followed a few suggestions no success.
The MS Office Home Business 2010 is the one I have a hard copy of. 

Office 2013 (all programs) crashed after saving as pdf

Posted: 24 Jan 2014 07:39 PM PST

Office 2013 came installed on my computer (which cost extra).  All of my office software crashed after saving as a pdf.  I tried running diagnostics on it, but the program told me it couldn't fix the problem until I upgraded to windows 8.1.  So I upgraded.  Now I can't find Office 2013 anywhere on my computer.  It just disappeared.  I'm a student and I can't afford to buy this software again.  Please help.

Selection.Goto behavior

Posted: 24 Jan 2014 06:51 PM PST

Is there a way of knowing when the following code fails?

Selection.GoTo what:=wdGoToGraphic, Which:=wdGoToNext, count:=1, Name:=""

ie when there is no "next graphic".  Currently it just does nothing and continues, which is not good.

Ideally I'd like the same behavior as Selection.Find.Execute, which returns false if the find fails, but the API definition for Selection.GoTo does not mention any return value.

type changes color

Posted: 24 Jan 2014 06:38 PM PST

Windows 2013 changes color and underlines without any prompting. and I can't figure out how to change back to my default.


Find and Replace Chapter Heading

Posted: 24 Jan 2014 06:19 PM PST

Hi,

I'm trying to Find and Replace all of the chapter headings in a Word doc. The chapters all begin with the word "CHAPTER" in the following format:

CHAPTER XI.



I want to
1. Maintain the text.
2. Format it as H1.
3. Insert a section break just before the word "CHAPTER."

I've used the following two wildcards to find the text without success:

^13([CHAPTER]) ([A-Z\.])^13
^13([CHAPTER A-Z\.])^13

Any suggestions?

I have a problem creating a TOC.

Posted: 24 Jan 2014 05:27 PM PST

When I create an entry for the TOC, it is capturing an entire paragraph and not just the topic words. The TOC then contains all that information. I have to go in and delete the words not wanted to create a simple looking TOC.  What is worse, if I want to add an ebtry, every entry already in the list is refreshed and has all the previously deleted information reinstated.  I have to go back and edit out all the extra information again and again, and again.

What am I doing wrong?



How do I create an index without having to search for terms?

Posted: 24 Jan 2014 05:20 PM PST

It may have been an early version of Word or possibly some other processor but the method to create a index was much easier that it seems to be now.  I recall ckicking on "Create Index" and the system would scan all words and create an alphabetic list eliminating duplicates and indicating the pages that the word was found.  There were two lists, one for common words (a, the, and, ...) which could be deleted as needed and all the rest of the words similarly listed but one then deleted those that one did not want in the index.

Granted, in a very long document, this would have its problems in length but I still believe it is easier than looking through the document and going though a routine of mouse calisthenics to place the entry.  At any rate, none of my work is that log.

I would also like to have it hyper-linked so that when one clicked on the word, one was delivered to that page (those pages).

Had this option disappeared? Might it be that I am just not seeing it?
Maybe somenoe can tell me what the softeware was if not MS Word.

How do I design a "return to TOC" for a long document.

Posted: 24 Jan 2014 05:11 PM PST

My document is only 10 pages long and have created a table of contents for the many topics discussed.  I can click on the TOC entry to get to the item in question but I would like a button in the footer to return to the TOC on a click.  How do I do this?

Editing Word 2013

Posted: 24 Jan 2014 04:10 PM PST

I have Word 2013 on Windows 8.  After the 8.1 update, whenever I open a Word file it is in a non-editable  mode.  There is no ribbon.  To edit it I have to copy the file (Ctrl A, Ctrl C, Ctrl V) to a new file. 


I do not have this problem with Excel. 


There is help for disabling edit, but none for enabling it.  Is there a reason for this insanity? 


Andrew

Word 2007 - Text Form Field (Calculate on exit) Issue

Posted: 24 Jan 2014 03:26 PM PST

Once I protect the document, and you can only tab thru the form fields created to enter data.  I receive a pop up window on the fileds set to "Calculate on exit"  This pop of field appears to be a custom pop up that I unknowingly created.  The top of the pop up window has my phone number which was one of the date fields I created.  ANY field checked to "Calculate on exit" will immediately display this custom pop up window after you tab thru the field.


Any suggestion where to turn this customized pop up window OFF?