Pages

Search

Mailbox Creation - Microsoft Exchange

Mailbox Creation - Microsoft Exchange

Mailbox Creation

Posted: 22 Dec 2004 05:33 PM PST

Yes, I did refresh the view. I don't receive any errors, either.
Thank you.
Al

"PES" wrote:
 

Best Practine Analyzer Goof with M:

Posted: 22 Dec 2004 11:11 AM PST

OK. The good news is that we can fix both problems. First, check the
registry and verify that the following key exists on the Exchange Server:

HKLM\System\CurrentControlSet\Services\EXIFS\Param eters\DriveLetter

If this key does not exist recreate it (and leave its value data blank).

Then, restart the Microsoft Exchange System Attendant service and the World
Wide Web Publishing service for the change to take effect. When then System
Attendant service is restarted, all services that depend on the System
Attendant service, including the Microsoft Exchange MTA Stacks and the
Microsoft Exchange Information Store services, will also be restarted.

This should resolve the error you reported below, as well as the issue
identified by ExBPA.

If this key does exist, what does it have for its value data?

As an aside, the updated and correct instructions can be found at
http://www.microsoft.com/technet/prodtechnol/Exchange/ExBPA/c97cbb52-dc3e-4765-b9d2-49fa42106515.mspx.

If you could, please post back here with your results.
--
Scott Schnoll
This posting is provided "AS IS" with no warranties, and confers no
rights. Please do not send email directly to this alias. This alias is for
newsgroup
purposes only.


"Nunzio Michael Vincent" <microsoft.com>
wrote in message news:com... 

Major Exch 2K3 Server issues suddenly

Posted: 22 Dec 2004 09:23 AM PST

Ok. Looks like this will require extended troubleshooting, so I would
recommend contacting PSS for assistance with this issue. They are best
equipped to handle this for you.
--
Scott Schnoll
This posting is provided "AS IS" with no warranties, and confers no
rights. Please do not send email directly to this alias. This alias is for
newsgroup
purposes only.


"Logan Biddle" <microsoft.com> wrote in message
news:com... 

Trying to test 5.5 migration to 2003 in a LAB Environment - HELP!

Posted: 22 Dec 2004 06:57 AM PST

The only way I have been able to do this in the past is, in my test domain
create a DC that exist in my real domain. If possible do an offline backup
of your exchange server, and restore just the data to a box in your test
domain. Unplug your test domain from your network. Rename the box you
copied your exchange data to the same name of you actually exchange server.
Install exchange 5.5 on the renamed box and use the same service account.
Then do a simple restore from the data. This will give you a copy of your
real data in your test domain, with the same SID and everything.

Hope this help.

"Paula" <microsoft.com> wrote in message
news:com... 

can't fwd to Internet email using Rules Wizard

Posted: 22 Dec 2004 06:54 AM PST

At last I found why I can't AutoFwd to any internet email.
In the Exchange Internet Mail Service properties -> Internet Mail tab ->
Advanced Options.
Untick "Disable Automatic Replies to Internet"


,Sur

"Sur" <com> wrote in message
news:%phx.gbl... 
to 
them. 

Problems and more problems with exchange 2003 sbs

Posted: 21 Dec 2004 11:38 AM PST

com wrote: 

Perhaps OT, but you need to do regular online backups that will purge the
logs. As in,
nightly. 

Don't leave that in place....do a full online backup using Exchange-aware
backup software such as SBSBackup, NTBackup (or third party b/u software
with its associated Exchange agent) and disable circular logging.
 

Event logs say anything? Are your stores mounted? I echo Susan's reply (mail
loop? antivirus software scanning any Exchange folders?)

When you get this resolved, move your databases & logs out of C. Ideally to
a disk/volume that has tons of space and nothing else on it (no user
data/user-accessible shares).
http://support.microsoft.com/default.aspx?scid=kb;EN-US;Q257184 is for E2k,
but will still apply. 

Duplicate E-mail being delivered

Posted: 21 Dec 2004 10:39 AM PST

I have an exchange 2000 server. one of my users is sending e-mail to a
client. the client says that he receives multiple copies of every e-mail
from my user. I have pop disabled on my server.

"Stefan Engelbert" wrote:
 

5.5 EventConfig

Posted: 20 Dec 2004 01:19 PM PST

Hi Mort,

Did not work. Ended up just deleting using E2K3 ESM. We will see if errors
start popping up :-) Here's reasoning....

Followed 187523 exactly, logged in as exchange service account, on first 5.5
server. Got MAPI error 0x8004010f (event viewer logged event 5), which
search on Eventid.net says means object not found. Orphaned folder was
showing in 5.5 Admin program and ESM, but when tried to view properties in
5.5 said can't, no replica. ESM brought up properties, but replicas tab had
nothing listed (not unexpected).

KB search on event 5 led to 265397 which regards duplicate folders on E2K.
265397 says stop Event Service if running, delete duplicate folders (rename
one of them first) using ESM, then restart Event Service. Event Service was
not running on our E2K3 server, so just deleted the orphaned eventsconfig
folder from ESM. Going on your statement can use same procedure on 5.5 for
orphaned as well as duplicates, assumed could apply to E2K as well.

Interestingly, yesterday exactly once we got event 1025 with error EcUpdate
0x8004010f on the E2K3 server. Everything was running fine and no other
errors. Not much available on that hex error. I called MS PSS and the tech
said db not corrupted, no need to restore from backup or run eseutil, just
maybe run isinteg fix with alltests (have not done that yet). I'm now
wondering if the error was because of the orphaned folder.

Thanks,
Joan



"Mort Billups" <net.(donotspam)> wrote in message
news:com... 

Not the typical message stuck in outbox issue

Posted: 20 Dec 2004 11:43 AM PST

nope. Absolutely nothing happens, it's like the action was ignored or
couldn't return an error message when using OWA. We are going to bounce the
Exchange services tonight during an appropriate time to see if that will
release the messages.

It is definately not client based as it happens on any PC, OWA and even POP.
(which was really impressive) Which leads me to believe it is mailbox
specific.

"Lanwench [MVP - Exchange]" wrote:
 

Using exchange 2003 as a pop3 server for customers

Posted: 20 Dec 2004 04:01 AM PST

rich wrote: 

Pop 3 is another conduit that is installed by default to permit access
to the same mailbox that you would access with std outlook. You can
make sure the microsoft exchange pop 3 service is running and telnet to
the servers ip address port 110 to see this. At this point, you can
issue raw pop commands to test. Exchange can talk http via owa, imap
(to outlook express, etc), pop3 (to outlook express, etc) or rpc (to the
std outlook client). As far as what pop3 ip address to point on, that
would be the address of exchange, your exchange front end server or the
ip address (if nat is used that is directed to the server). The smtp
address would be the same unless you implemented a seperate smtp
solution. Now with smtp, you are going to have to permit relay. You
can do this based on authentication or their ip addresses. The ip
address method would be best if you know the addresses. If not, you
will need to do authenticated relay. Be aware that the credentials like
pop3 are in clear text unprotected unless you use secure smtp.

I'm not trying to sound rude either, but you are asking how to set up a
pop 3 server. The answer to this specific question is that it is done
by default. At most, you will have to change the service to automatic
and start it. I think the problem is that you want detailed
instructions on how to set your exchange server up to look like your
ISP's linux sendmail/qpopper solution. Unfortunately, I don't have this
documention pre canned.

As you set up this solution and you have more specific issues with smtp
relay or more specific issues with pop please post those as well.
Please note that Exchange is very expensive as a pop3/smtp relay
solution. There are free solutions out there that will get you this
without having to be several dollars per mailbox.

--
-------------------------
Paul Stewart
Lexnet Inc.
Email address is in ROT13

Installation question

Posted: 19 Dec 2004 04:16 PM PST

Dead wrong. Go to http://www.microsoft.com/mspress/support/search.asp to
pull up the errata for the book.

Tim C
MCSE, MCDST

"Joe Marr" <com> wrote in message
news:phx.gbl... 

upgrading from SBS 2000 to Exchange Enterprise

Posted: 17 Dec 2004 01:17 PM PST

Bruce_IT wrote: 

Take a look at the SBS transition pack:
http://www.microsoft.com/windowsserver2003/sbs/techinfo/overview/licensingfaq.mspx#EABAA
 

Access E2003 mailbox in a foreign W3 forest

Posted: 17 Dec 2004 07:55 AM PST

Mark,
Can you clarify, please. Your response was in conflict with itself. If I
interpert your response correctly, he will not see his own GAL. If he wanted
to see his own GAL, is there a way to accomplish that ? Thanks Derek

"Mark Arnold [MVP]" wrote:
 

Foward email destined for another domain to alternate domain/email

Posted: 16 Dec 2004 07:15 PM PST

Thank you for the feedback, Lanwench.
I am open to other suggestions people.

LegacyExchangeDN

Posted: 16 Dec 2004 01:53 PM PST

This attribute is most used in a mixed environment with Exchange 5.5. There
is no need for us to modify it manually in the migration project and this
attempt may cause some problem on Exchange server. Exchange will update the
attribute automatically if wants to use it in future. So my suggestion is
just leave it there and go on to finish your migration project.

If you have any problems or concern in future, please feel free to post
here. It is always our pleasure to be of assistance.]

Best Wishes for Merry Christmas and Happy New Year!

Regards,

Pat Cai
Microsoft Online Partner Support

Get Secure! - www.microsoft.com/security
================================================== ===
When responding to posts, please "Reply to Group" via your newsreader so
that others may learn and benefit from your issue.
================================================== ===
This posting is provided "AS IS" with no warranties, and confers no rights.

Need reference material

Posted: 16 Dec 2004 01:43 PM PST

thanks for the help

"Paul Robichaux [MVP]" wrote:
 

Exchange AD ot not?

Posted: 16 Dec 2004 12:51 PM PST

Hmm...not off the top of my head. Have you tried searching the Knowledge
Base (http://support.microsoft.com)?
--
Scott Schnoll
This posting is provided "AS IS" with no warranties, and confers no
rights. Please do not send email directly to this alias. This alias is for
newsgroup
purposes only.


"Zessler" <microsoft.com> wrote in message
news:com... 

Syncing information between AD and Exchange 5.5

Posted: 16 Dec 2004 12:35 PM PST

This is for Exchange 2000 will this work for Exchange 5.5 to AD on Windows
2003?


"Mark Arnold [MVP]" <org> wrote in message
news:com... 
as 
allow 
side? 
the 
http://www.microsoft.com/downloads/details.aspx?FamilyID=C763B584-C511-4687-B27F-A13A8F82D4C8&displaylang=en 

Quick question about Ex2K filtering..

Posted: 16 Dec 2004 11:49 AM PST

Um - looks like that ended up being uncompiled code. Probably not the best
option. Found another option for you though.

http://support.microsoft.com/?id=255253

Once you have the baseDN (the long string that you saw in the previous
post), you can use LDIFDE to export that information to a text file.

--
Ben Winzenz
Exchange MVP


"Ben Winzenz [Exchange MVP]" <ben_winzenz@NOSPAMdotmessageonedotcom> wrote
in message news:phx.gbl... 

rename exchange OWA in IIS

Posted: 16 Dec 2004 10:13 AM PST

Interesting. New connection ? I don't see that ?
What version of exchange are you using ?

"David" <microsoft.com> wrote in message
news:com... 

SMTP Banner

Posted: 15 Dec 2004 01:27 PM PST

In article <com>,
Chrisl <microsoft.com> wrote:
 


In that case, you'll need to follow the steps described in KB article
281224 to change the SMTP banner for your W2K box.

Cheers,
-Paul

--
Paul Robichaux <org>
MVP - Exchange
Exchange security book: http://www.e2ksecurity.com
FAQs: http://www.swinc.com/resource/exchange.htm &
http://www.swinc.com/resource/e2kfaq.htm

OWA install

Posted: 15 Dec 2004 01:15 PM PST

"Kevin" <microsoft.com> wrote in message
news:com... 

You will have to install the service pack, I'm afraid. Some of the OWA .asp
files need replacing before they will work at all.

Lee.

--
___________________________________

Outlook Web Access for PDA and WAP:
www.leederbyshire.com
___________________________________

OWA adds a question mark.

Posted: 15 Dec 2004 12:43 PM PST

Paul, all is up to date. Do not use Solarwinds Professional. The problem
has been duplicated on any of the workstations and accounts that I have tried
so I am fairly sure it is something going on with the server side.

Any other suggestions out there?


"Paul Robichaux [MVP]" wrote:
 

Microsoft Word - word13 macro design

Microsoft Word - word13 macro design

word13 macro design

Posted: 11 Jul 2013 04:34 AM PDT

I have a WORD 2013 *.dotx form file to be filled in.

 

One of the lines has a TEXT CONTENT CONTROL with a UNIQUE STYLE (I'm using the value of this as part of the header from page two onwards)

 

I would like to write

  1. an AutoOPEN macro which asks for INPUT into this TEXT CONTENT CONTROL indetifiable by the UNIQUE STYLE
  2. use the (INPUT)=TEXT CONTENT CONTROL as filename and ask user to select directory where to save and then save the file
  3. after completing all other sections of the form - click a 'button' on the form which runs a macro to:
  • save the file
  • create a Pdf file with the same filename - save it to directory selected by user
  • open outlook with new mail with the Pdf file as attachment - user to input receipient's email addresses

Is this possible within Word 2013 - does anyone have a sample macro to use (modify)?

THANKS

the fonts are too close to each other in word, why is that?

Posted: 10 Jul 2013 08:59 PM PDT

http://db.tt/w4ADums6

Why are the letters so close to each other in that example.

I need to have it fixed. The top one is office 2013 and the lower one is office 2007.

Tung

Word VBA to delete all section breaks

Posted: 10 Jul 2013 07:28 PM PDT

I am looking for code that will force Word to use the initial header and footer (i.e., delete all secondary section breaks).

Does anybody have the code for that?

Mail Merge - If statement - Date Issue - Can't get the a field with a date to show on the Mail Merge form

Posted: 10 Jul 2013 07:23 PM PDT

Another Mail Merge Question.  I'm creating an If formula which will either create a line on a form if the field is blank or show the actual content from the data field, which in the case, happens to be a date (MM/dd/yyyy).  The data is pulled from a database into Excel and the column has mostly blank fields, but a few with an actual date.  Because this is a marriage date field, there won't always be date. 

 

Anyways, I setup the formula, and for the records with a blank field, I get the line.  However, for the fields with a date, nothing appears.  I read somewhere that Mail Merge doesn't work if the field columns with dates also have blank cells. 

 

Here's the formula I'm using:   {if{ Mergefield "fieldname"} = "" "_________"{ Mergefiled "fieldname"}} .  

 

I also tried adding \*@ "MM/dd/yyyy" after the final fieldname, but that didn't do anything either. 

 

For formula works in other sections of the form where the data field is just the YEAR.  Maybe because it's just 4 digits, it's actually considered text instead of a number or date. 

Using both Word 2010 and Word 2013

Posted: 10 Jul 2013 05:18 PM PDT

Hello, 
I currently have full installations of both Office 2010 Professional Plus and Office 2013 Professional installed on my laptop computer. I can run both versions of any Office program congruently, with the exceptions of Word and Outlook. While I understand the conflict between Outlook 2010 and Outlook 2013, I was wondering if there is any way to get Word 2010 and 2013 to launch without the previous instance being cancelled out with the latest one. Basically, whenever I try to switch between the two Word versions I receive a pop-up stating that Office 20xx is configuring for setup. Again, this only happens for Word. I can use Excel, Powerpoint, Publisher, Onenote, etc without need for Office to re-configure. I am not running either version of Office in click2run. They are both full installs. Thanks in advance for any info 

office 365 er pludselig holdt op med at fungere

Posted: 09 Jul 2013 10:26 PM PDT

Jeg har et abb. på office 365 premium, der pludselig er holdt op med at virke både på min stationære og bærbar.Har forsyge at køre en rep. fra kontrolpanel/programmer og funktioner/rediger. Og nu er Office mappen tom, altså er programmerne slettet. Hvad gør jeg??

Med venlig hilsen

Preben

I have a subscription cost of the office 365 premium that has suddenly stopped working on both my desktop and bærbar.Har forsyge to run a rep. from Control Panel / Programs and Features / Edit. And now the Office folder empty, that is, programs are deleted. What to do?

Sincerely,

Preben

Visual line on every line in between text and tables

Posted: 09 Jul 2013 09:14 AM PDT

When converting a 2010 Word file to 2013, there is a visual line on every line in between text and tables in Print Layout and I can't get rid of it, very distracting. Seems like it has to do with new layout options, but is not new gridlines feature.

Word 2013 - 'The directory name is not valid' error

Posted: 06 Jul 2013 01:36 AM PDT

I recently installed office 365 home premium, and have been running word. i transferred all my schoolwork from a usb flash drive to skydrive so i wouldn't have to use the flash drive. i found that it was a bit slow, so i saved a copy of the work onto the hard drive. After this i renamed both the hard drive and the folder my work was in to a better suiting name. i opened word to continue my document. using 'open other documents', i located my work on the hard drive and attempted to open it. i receive the error message 'the directory name is not valid (C:/.../English - THE BRANDON SECRET F...)'

Office 20003 Activation - Microsoft Office forums

Office 20003 Activation - Microsoft Office forums

Office 20003 Activation

Posted: 08 Oct 2004 05:19 AM PDT

If you just upgrade from home to pro you likely will not need to activate.
If you choose to do a fresh install, and office will not activate the normal
way just call Microsoft and explain your situation.

Paul Riemerman

"Gary Mazzone" <com> wrote in message
news:06f101c4ad31$0e648d10$gbl... 

Junk Email filter

Posted: 08 Oct 2004 04:33 AM PDT

I mean adding mailboxes to the "open these additiona mailboxes" tab in MS
Exchange server settings.

A customer of mine is complaining of a large number of unsolicited emails in
a communal mailbox to which he has access.

Is there anyway I can filter them out?

"Milly Staples [MVP - Outlook]" wrote:
 

Office Shortcut Bar Removal from Office 2003 (Office XP Pro)

Posted: 07 Oct 2004 10:22 AM PDT

No, it's not. You can install the OSB from an earlier version of Office
AFTER the installation if you deselect everything except the OSB when
installing.

--
Milly Staples [MVP - Outlook]

Post all replies to the group to keep the discussion intact. Due to
the (insert latest virus name here) virus, all mail sent to my personal
account will be deleted without reading.

After searching google.groups.com and finding no answer, Timothy L asked:

| That is not something that anyone can do, however, you might want to
| install Office 97/2000/XP **BEFORE** installing Office 2003. During
| the install, check the box for Office Shortcut Bar so that it will be
| included.
|
| When you install Office 2003, DO NOT choose to remove (uninstall) any
| components from Office 97/2000/XP.
|
|
| This is the ONLY way to have the Office Shortcut Bar from Office
| 97/2000/XP to be installed with Office 2003.
|
|
|
|
| You might also be interested in the following Microsoft Knowledge Base
| Articles:
|
| 830180 - Frequently asked questions about the Office Shortcut bar and
| Office 2003
| http://support.microsoft.com/default.aspx?kbid=830180
|
| 822573 - Office Shortcut Bar is not included in Office 2003
| http://support.microsoft.com/default.aspx?kbid=822573
|
|
|
| "sprugg828" <microsoft.com> wrote in message
| news:com...
|| Why is the Office Shortcut Bar removed from Office 2003!?!?! I
|| "supposedly upgraded" my office computer at work from Office 2002 to
|| Office 2003 (Office XP Pro) to come to find out that the "newest"
|| version had removed such a versatile and highly used utility. Was
|| this an oversight? Are there plans to add it back in? This is not
|| an improvement in my opinion!!!
||
|| My Suggestion: Add the Office Shortcut Bar back in to Office 2003
|| (Office XP Pro) ASAP!

How many computers can I load xp onto?

Posted: 07 Oct 2004 06:25 AM PDT

Hi, Rich,

I wouldn't rely on peer support for a legal / licensing question, so I won't
offer it. The terms of the EULA differ depending on what version of Office
XP was purchased.

I don't work for Microsoft, so I'd contact them or read their documentation
to get the best answer.

If the EULA is unavailable, you can call Microsoft for free at
1-800-426-9400, Monday through Friday, 6:00 A.M. to 6:00 P.M. (Pacific time)
and ask to speak directly to a Microsoft licensing specialist. Worldwide
customers can use the Guide to Worldwide Microsoft Licensing Sites to find
contact information in their locations.

I've called them and have had good luck speaking with a real person for
free.

--
Susan Ramlet
Office MVP
______________________
Please reply to the newsgroups so that all may benefit.



"Rich" <com> wrote in message
news:eNw9d.12277$news.prodigy.com... 

Do I have to install all three disk with XP?

Posted: 07 Oct 2004 05:51 AM PDT

What if you need to install an Input Method Editor. Will
that call for disk 2 or 3?

mg

 
message 
com... 
to install Disk 2 

What if my CD is too damaged to access the proplus.msi install fil

Posted: 05 Oct 2004 06:03 PM PDT

"=?Utf-8?B?QnJpYW4gQg==?=" <Brian microsoft.com> wrote
in news:com:
 

Do you have two CD drives, a CD or DVD burner and a CD or DVD ROM? If
so, the burner will often read disks too damaged for the CDROM drive,
it's worth a try?

This rest will be of absolutely NO help to you now, but will everyone
reading this please make copies of your important CDs ASAP?

I know if the CD is ruined MSFT will send you a new one but what if
it's an older product such as Office97? Get the backup made now so you
won't regret it later!

PS. If you don't have a CD burner thing about it, they're getting
pretty reasonable in price.

In Microsoft Project Microsoft Project

In Microsoft Project Microsoft Project

In Microsoft Project

Posted: 05 Sep 2004 06:55 PM PDT

Hi Ellen,

Welcome to this Microsoft Project newsgroup :-)

Yes it does mean estimate. However, all project tasks are estimates of what
you hope you will achieve. When you over-type the Duration from its default
"1 day?" the ? will disappear indicating that you have made a more positive
statement. You can enter a duration with a ? after it and Project will
treat it as an estimate. Then, you can filter for all estimated durations
so you can see those that need firming up. Quite a useful tool in the pm's
armoury as it gets the plan up and running even if there are some doubtful
areas.

FAQs, companion products and other useful Project information can be seen at
this web address: <http://www.mvps.org/project/>

Hope this helps - please let us know how you get on :-))

Mike Glen
MS Project MVP

Coelho wrote: 

Microsoft Photo Editor Windows XP?

Posted: 05 Sep 2004 01:55 PM PDT

Jan,

I didn't realize the post was going to Microsoft Project Area. I'll try to
repost in the General Microsoft Office Area. You can delete list post.
Sorry for the inconvenience.

Jim

"Jan De Messemaeker" wrote:
 

Critical path in MSP

Posted: 05 Sep 2004 09:35 AM PDT

Yep - MSP is based on classical CPM with Action-on-Node.
--
Steve House [MVP]
MS Project Trainer/Consultant
Visit http://www.mvps.org/project/faqs.htm for the FAQs


"Dave N" <microsoft.com> wrote in message
news:6ced01c49427$d706f7d0$gbl... 

Assigning tasks - And have them automatically come off my list

Posted: 05 Sep 2004 09:17 AM PDT

Are you talking about assigning tasks off of your Outlook to-do list to
another person or are you talkin about assigning tasks to resources within
the MS Project project scheduling software?

--
Steve House [MVP]
MS Project Trainer/Consultant
Visit http://www.mvps.org/project/faqs.htm for the FAQs

"David R" <David microsoft.com> wrote in message
news:com... 

Lotus Agenda Rewrite?

Posted: 04 Sep 2004 05:30 AM PDT

A little OT, but some Agenda users moved to Ecco when it came out. It
died in the late 90's. I recently discovered that Ecco is available for
free from NetManage at
ftp://ftp.netmanage.com/support/pub/utilities/EC401/Ecco32/ ...



Ken Forbus wrote: 

"Pretty" Project Plans ...

Posted: 04 Sep 2004 12:30 AM PDT

I would like to get a copy as well!

Being able to show "pretty" reports is the exact same problem I'm facing.

Add Drawing Tools to MS Project Network Diagram To Highlight Act.

Posted: 03 Sep 2004 03:01 PM PDT

You're welcome, John :-)

Mike Glen
MS Project MVP



John wrote: 

Title Bars

Posted: 03 Sep 2004 08:35 AM PDT

Maybe add logic to the filter to use the field "summary = no" will do
what you want.

Hope this is useful to you. Let us know.

rms




Pammy wrote: 

Renaming Baseline Fields

Posted: 03 Sep 2004 08:14 AM PDT

glad it's solved - thanks for the feedback

"Ryan" <manhattan.ks.us> wrote in message
news:phx.gbl... 
baseline? 
say 
will 
fields, 
Interim 
because: 

How to wrap words in Task Name, Text columns ?

Posted: 03 Sep 2004 07:40 AM PDT


Wellie,
If you have Project 2000 or later you can drag the row divider to
increase the row height of individual tasks. This will show the wrapped
text. Another method is to go to View/Tables/More Tables. The active
view table will be highlighted. Hit "edit". In the Table Definition
window that appears, change the row height setting in the lower right
corner. This setting will apply to all task rows but only for this view
table. You will need to do the same thing to other view tables as
necessary.

Be aware that text wrap only applies to Project fields that contain
spaces in the text string. Therefore, the Predecessor and Successor
fields will not wrap.

Hope this helps.
John

Custom Calendar for Tasks

Posted: 03 Sep 2004 06:38 AM PDT

Brian --

Thank you for your kind comments. You are a true gentleman! :)

--
Dale A. Howard [MVP]
Enterprise Project Trainer/Consultant
http://www.msprojectexperts.com
"We wrote the book on Project Server"


"Brian Stebbins" <com> wrote in message
news:phx.gbl... 

Crosstabulate resources and tasks

Posted: 01 Sep 2004 03:52 AM PDT

Hi Valentin

there may be a way to do it in project, but i use Jack Dahlgren's Export
Hierachy to Excel macro (http://www.masamiki.com/project/macros.htm) and
fiddle around with the outcome and create a pivot table from it for this
type of report.

Once you've exported the data to excel, copy the summary tasks down the
relevant rows, convert the work to hours (bit messy, let me know if you need
help on this) and then delete all columns except the summary column,
resource name & work.

Hope this helps
Cheers
JulieD



"Valentin Stanescu" <com> wrote in message
news:677601c493df$64276530$gbl... 

Microsoft CRM - SBS Default Web Site & Microsoft CRM Version 1.2 & Host Header Value

Microsoft CRM - SBS Default Web Site & Microsoft CRM Version 1.2 & Host Header Value

SBS Default Web Site & Microsoft CRM Version 1.2 & Host Header Value

Posted: 21 Apr 2004 02:51 PM PDT

David,

I have also noticed that I am getting the following errors since the change.
The emails mentioned in the error message look to be spam but the error
messages are only since I have made the host header additions. I have had
them before when I changed the host header value.

The errors are as follows;

Event Type: Warning
Event Source: CrmExchangeQueueService
Event Category: None
Event ID: 5896
Date: 22/04/2004
Time: 3:30:32 PM
User: N/A
Computer: 001DC001
Description:
An HTTP Status of '404 - Not Found' occurred while attempting to deliver a
message. Please check the URL in the registry. Message subject: 'Fw: 0rder
confirmati0n #908746.' URL: 'http://001DC001/MSCRMServices/CrmEmail.srf'

and

Event Type: Error
Event Source: CrmExchangeQueueService
Event Category: None
Event ID: 5892
Date: 22/04/2004
Time: 3:30:32 PM
User: N/A
Computer: 001DC001
Description:
The message 'Fw: 0rder confirmati0n #908746.' failed to deliver to all
servers

Thank you again for your time.

Regards,

William Kennedy

"David Copeland [MSFT]" <microsoft.com> wrote in message
news:phx.gbl... 

Run custom report from Quote form

Posted: 21 Apr 2004 01:30 PM PDT

well, you could write a very simple app that takes the object id and run a
sql call to get the quotenumber, and then from this app call out the report
via the url,

should be a couple lines of code

-Gary

"Eric at StrataCom" <com> wrote in message
news:OXkOKi%phx.gbl... 
http://strongbad/reports/viewer/html/viewer.aspx?id=398&sf=({quote.quotenumber})='QUO-01002-9QRYHR' 
that 
the 

Can`t send a mail in the CRM

Posted: 21 Apr 2004 08:01 AM PDT

Did you install the Exchange router?

Matt Parks

----------------------------------------
----------------------------------------
On Wed, 21 Apr 2004 08:01:08 -0700, "Robert Jones"
<microsoft.com> wrote:

We are doing a test with the CRM. We have installed the
CRM without problem.

The problem is: when a user try to send a mail to some
contact we receive the next error:

Communication error. Microsoft CRM key not found.

Can anyone help me?

CRM Customization Activities

Posted: 21 Apr 2004 01:55 AM PDT

Dmitry,

only fields that are common to all activity types are available which is why
not all fields are available. I suggest you take a look at our product
"Activity Summary" which displays the "Regarding" field in addition to
displaying a global view of all activities that are related one way or
another to an account. You can download a free evaluation copy at
www.c360.com.

-Jeremie Desautels
c360 Solutions


"Akinchev Dmitry" <ru> wrote in message
news:22a901c427a9$ee3a9730$gbl... 

SBS2K3 connect computer site not working

Posted: 20 Apr 2004 09:37 PM PDT

It was running the default web stuff that SBS2k3 install
by default such as Sharepoint (company web) and the
configuration pages that are used to connect computers to
the network (http://servername/connectcomputer) and OWA.

 
already running other 

Tasks and calendar on outlook

Posted: 20 Apr 2004 09:31 PM PDT

Not that I know of. For my opinion, you gain some because the outlook calendar can do things like recurring meetings, shared calendars, and alarms. If I were you I would just experiment on creating tasks the different ways (CRM, SFO, native outlook) and see what it gets you. That's what I did

----- microsoft.com wrote: ----

So it is a must to install the SFO and make sure that the
users use the SFO interface rather than the web
interface. Would i loose any functionality if I use SFO
instead of the web interface

TI 
SFO CRM button, it will show up in CRM and in outlook
immediately 
 
in 
a 
Outlook 
will 
the 
router 
Does 
from 
before the 

Svr Prep/CRM Install - Hire a Pro?

Posted: 20 Apr 2004 06:17 PM PDT

Stu,

A CRM implementation done right really consists of very little install time.

I would say in my projects I spend about 60% of my time working with clients
to learn their business processes and documenting requirements and
customizations. 20% actually implementing those customizations, 10% on the
actual install, and 10% on training and handoff to the customer.

CRM is a lot less about the technology, and a lot more about the internal
processes and strategy around the technology.

If a customer asked me to come to their site and "only install" the system,
I wouldn't do it. I would only engage with customers who I felt are setting
themselves up for success.

Jake Horn
"Stu" <microsoft.com> wrote in message
news:1e6701c4273e$5955b020$gbl... 

Hard Disk Clean Up Tools

Posted: 20 Apr 2004 04:34 PM PDT

If this is an enterprise critical system you need something better than
scandisk etc as gary says. Also you really need to be running on RAID 5 so
you can cope with a hard disk failure. Heck you could even go to multiple
RAID controllers but as the hard disk is spinning so fast its the piece most
likely to fail


"Gary" <NOSPAM.com> wrote in message
news:%phx.gbl... 

Handling Multiple Marketing Lists

Posted: 20 Apr 2004 02:47 PM PDT

Thanks again for your input, John.

Yes, we do have multiple campaigns to deal with. In addition, and perhaps
more important, do you have any tips for how we can avoid redundant data in
our Leads list, assuming we use that as a "dumping ground" for all new
marketing lists?

One problem we seem to have is that if we get marketing lists from several
companies (which are all for the same campaign), there doesn't appear to be
any globally unique identifier for each contact (like a social security
number), so there is probably a pretty good chance we'll end-up with
duplicate data being imported. Do you have any tips for avoiding that short
of manually combing through each list? I know this probably isn't exactly
MS CRM related...

Sincerely,
Todd M. Taylor

grouping contacts

Posted: 20 Apr 2004 01:36 PM PDT

Thanks, I think that will work out well. 
categorize accounts by 
for? 
(similar to 

Need advice on where to import marketing lists...

Posted: 20 Apr 2004 01:07 PM PDT

I've found a few more Microsoft CRM "definitions" in the User Guide PDF:

LEADS:
Leads are individuals who have indicated an interest in finding out more
about the products or services offered. Leads that do not work out are
disqualified, but retained in the database for business reporting purposes.

OPPORTUNITIES:
An opportunity is a potential sale to an account or contact.

From the above definition of a "Lead", a contact in a marketing list
probably doesn't fit this defnition, however, there doesn't appear to be any
place else to import a marketing list other that the "Leads" section.

Sincerely,
Todd M. Taylor

After upgrade to 1.2 can't edit users

Posted: 20 Apr 2004 12:54 PM PDT

 
and then do an 
message 

Activity Linking

Posted: 20 Apr 2004 12:23 PM PDT

Take a look at our product "Activity Summary". It displays a global view of
all activities related to an account in addition to displaying the due date
and the created on date which allows you to sort these activities
chronologically. On the same screen, Activity Summary displays all
activities directly related to the account and also it displays activities
associated to all contacts linked to this account, activities associated to
cases related to the account, activities releated to opportunities under the
account, etc.

You can download a free evaluation copy at www.c360.com.

-Jeremie Desautels
c360 Solutions

"Ketil" <microsoft.com> wrote in message
news:209601c42795$fe528dd0$gbl... 

Activities & History Views

Posted: 20 Apr 2004 12:21 PM PDT

Thanks again John, I will check out c360, seems they have
several useful tools.

 
there is also a 
could code your own 
Lists, 

CRM Exchange Router for multiple IP SMTP addresses

Posted: 20 Apr 2004 07:57 AM PDT

OK, that point wasn't clear, I just wanted to rule out an issue with the
user/email/queue setup. I don't know if there is a way to get the router to
monitor the secondary SMTP server or not. I'm guessing you will need to open a
support ticket for this and get help from MBS support.

Matt Parks

----------------------------------------
----------------------------------------
On Tue, 20 Apr 2004 10:21:03 -0700, "Vasja Bojanic"
<microsoft.com> wrote:

Hi Matt,

Thanks for reply. Actualy we did try to send to com and it
works OK, because all email for DOMAIN1.COM comes in via primary SMTP virtual
server, and it appears that CRM router monitors this SMTP flow ONLY. Problem is
that all SMTP email for DOMAIN2.COM is MX registered to flow via secondary IP
address and through secondary SMTP virtual server, and this SMTP flow is not
monitored by CRM router. Correct me if I am wrong, but it seems that CRM router
monitors only one virtual SMTP server - primary.
It is not problem to set account's primary SMTP e-mail in active directory -
both accounts have both SMTP addresses. SUPPORT account has primary
COM and secondary COM. Other account - SUPPORT2
has primary COM and secodnary COM. E-mails
which comes in to DOMAIN1.COM work OK for both accounts. But email which comes
to DOMAIN2.COM is missed.

Integrate Microsoft CRM 1.2 with SAP

Posted: 20 Apr 2004 02:51 AM PDT

I think we will see integrations into the Microsoft systems first such as
Great Plains, Solomon, Axapta. However we may see SAP integration from a 3rd
party ISV



"Martin Gallagher" <com.nospam> wrote in message
news:com... 
Plains 7.0/7.5 as well as the Office products. On some of the courses it
does state a plan for SAP integration but I have not found any information
to date.

Yesterdays date in Activities screen

Posted: 19 Apr 2004 09:41 PM PDT

I would hope that the next CRM release will set you CRM timezone to the same
as your system timezone to avoid this confusion in future


"ilr" <microsoft.com> wrote in message
news:com... 

cant' delete users

Posted: 19 Apr 2004 03:52 PM PDT

I guess I understand the reasoning behind not being able to delete users,
but as a developer, I need to break stuff to see how it works and adding
test users seems like a legitimate need. As much as I'd like to create an
entire CRM development environment, coming-up with another server on it's
own domain to do that just isn't feasible :(

I highly recommend not dinkin' with the database... I did and got myself
locked-out of CRM ;D

Sincerely,
Todd M. Taylor
 

SFO hangs when going offline

Posted: 19 Apr 2004 03:14 PM PDT

no......its pretty buggy, a few months ago I called MBS and opened a
case,.....well over a month later not a single thing was resolved, and being
under pressue I simply used my own laptop as a guinea pig and formatted the
sucker, and it worked, and for a second machine with the problem I upgraded
it to XP from 2000 (formatting was not acceptable, hehe).....

funny thing is now,....I have this new laptop that I have formatted and
installed windows 4 times in a row, trying to keep it as vanilla as
possible, and just get CRM on there, and it simply won't give, the outlook
client consistantly gives the same error, no matter what I try (I even
installed with bare bare bare bones, and ONLY the patches it
demanded).....wild stuff

-Gary

"John O'Donnell" <com-nospam> wrote in
message news:phx.gbl... 
Offline, 
No 

Printing internet selections

Posted: 19 Apr 2004 02:14 PM PDT

just use your mouse to highlight the areas/pages in question, and when you
do File >> Print, select the "Selection" option under Page Range

-Gary

"Dave GC" <microsoft.com> wrote in message
news:13c801c42653$44ec89b0$gbl... 

Integration with Office (2003)?

Posted: 19 Apr 2004 01:38 PM PDT

Note is now possible to incorporate .net code such as C# into the latest
releases of office such as word and excel so this type of customization
would be very possible. Just needs a friendly developer to write it for you.

Here is some information to get you started

http://www.msdn.microsoft.com/office/default.aspx?pull=/library/en-us/odc_vsto2003_ta/html/odc_vstexlweb.asp


"John O'Donnell" <com-nospam> wrote in
message news:uD$phx.gbl... 
but 

Automatic activity creation via email?

Posted: 19 Apr 2004 01:23 PM PDT

Jake

I am also interested in creating emails in CRM. You mentioned that you thought it would be easy using the SDK. Can you give me a pointer on how you plan to do it? I don't know where to begin. I know that I have to use a CRM API to create an activity, but that's about it. Thank you for any advice


----- Jake Horn wrote: ----

How would workflow know how to possibly create an activity from any emai
that came into Exchange

"Gary" <NOSPAM.com> wrote in messag
news:phx.gbl.. 

More than one Sales Process Workflow?

Posted: 19 Apr 2004 09:30 AM PDT

Thanks for the info...

It works wonderfully.
 
process that checks to see 
it issues a Stop. 
then Stop. 
processes are involved in 
<microsoft.com> 
defined. 

Can't go online

Posted: 19 Apr 2004 06:41 AM PDT

I've been battling that error for months, its almost futile. I contact MBS
and spent a full month with their developers and engineers and got no where,
I eventually said screw it and reintalled the entire machine (OS too) and
that fixed it. Now I have a machine that no matter how many times I
format/reinstall I keep getting that error. However last time, I simply
upgraded this machine to WinXP from Win2000, and that seemed to do the
trick........

-Gary

"Glenn Strom" <net> wrote in message
news:0e5b01c42613$fbcf56c0$gbl... 

Import Customization error

Posted: 19 Apr 2004 04:40 AM PDT

Thanks for the reply. However, I have uninstalled and re-
installed CRM following install directions. IIS is
installed with defaults.

Still hoping for a fix.....

Peter

 
install... 
decided to setup IIS the way I normally do and MS CRM
didn't like it. 
in message news:0d7c01c42603$197ff4b0$gbl... 
event 
an 
Microsoft.Crm.Tools.ImportExportXml.XmlCustomizati on.Popul 
web 
any 
error 
no 
Subscribe to: Posts (Atom)