Pages

Search

Microsoft Word - Insert Hyperlink Default Browser

Microsoft Word - Insert Hyperlink Default Browser

Insert Hyperlink Default Browser

Posted: 24 Aug 2013 01:19 PM PDT

When I select "Insert Hyperlink" in Word 2010 and select the "Browse the Web" button to select an address, Google Chrome pops up instead of IE 10.

 

I'm sure this happened when I installed Chrome for testing web pages in multiple browsers, but I want to use IE 10 inside Word to select hyperlink addresses.

 

YES ... I have selected IE as my default browser in Control Panel for all apps.

 

I've seen this question asked in a number of forums. Nobody has answered it yet.

 

Microsoft!!! Google is beating your time because they provide better support. They replaced your browser and nobody on your team seems to know how to reverse it in your own products!!

not sure what is wanted in title box

Posted: 24 Aug 2013 10:32 AM PDT

This may be a second post of same question but I'm new to this community and just learning. How can I prevent a document from double spacing lines when apparently all settings for single spacing are correct.

What are the chances of editing being enabled in Read Mode?

Posted: 24 Aug 2013 08:52 AM PDT

I use Word almost exclusively for writing long documents of plain text. In Word 2010 editing in Read Mode worked great for me. Now I find this feature has been removed. I can't be the only one who misses it.

 

So ... any thoughts on whether it will be brought back?

.docx is locked for editing

Posted: 24 Aug 2013 06:48 AM PDT

Every time I open an existing .docx document it opens the file but it also wants to opens a new word doc with the message "file in use", .docx is locked for editing by ...

I just cancel and close this and go to the orginal document and could work on it but that second page is annoying.

Thank you.
René

unable to print from office 365 home premium

Posted: 24 Aug 2013 12:45 AM PDT

I created a document in word and also one in excel.  I cannot get either of them to print.  I have a HP 1600 printer that I use with my laptop and was able to print with it until I bought MS Office 365 HP.  I'm starting to regret as I have a meeting tomorrow at 10 a.m. and it is now 3 a.m. and I still can't get my documents to print that I need for the meeting. 

Vertical Text

Posted: 23 Aug 2013 11:39 PM PDT

How do I create a vertical textbox in Word 2013? I googled this question but the returns were all about earlier versions that don't apply to the new interface.

MS Word EPS support (Word 2013 for Win vs Word 2011 for Mac)

Posted: 23 Aug 2013 10:11 PM PDT

I have some eps files created by a program on my Mac. Those files look immaculate when inserted into Word 2011 for Mac. Those same files look absolutely TERRIBLE when inserted into Word 2013 for PC. Why? It is SO frustrating that the two programs do not function more similarly. Is there any better eps filter I can install for Windows Word?

 

Thanks for any help you can provide. 

Word Web App Crashes when opening SkyDrive Docs on iPad

Posted: 23 Aug 2013 07:18 PM PDT

THE SITUATION:

I have an Office 365 Home Premium subscription, which allows me to access the Web apps, and my documents are on SkyDrive.

 

THE PROBLEM:

 

From a browser on my iPad, I can access my SkyDrive files (skydrive.live.com).  However, when I try to open one of the documents from that location, Word Web App opens with the document for a couple seconds, and then "crashes." (Word Web app and the browser close, and I am returned to the iPad's home screen.)  Some of these documents were originally created from MS Word 2013 on a Windows 7 laptop, and other documents were created in a Word Web app from the same laptop.

 

The app and browser also crash when I try to create a new document from the SkyDrive page in my browser on the ipad.  (ipad...Browser...Skydrive.live.com....Create....Word document....Crash). 

 

WHAT IS NOT THE CAUSE OF THE PROBLEM:

The problem is not with the browser, as I have tried multiple browsers that are compatible with the ipad. 

The problem is not with the account, as the same thing happens from other accounts.

The problem is not with a particular document, or the app which created it, as I have tried many documents that were created in various apps and environments. (See above.)

 

 

WHAT IS THE CAUSE OF THE PROBLEM:

It appears that the problem has to do with the iPad, AND SkyDrive AND the Word Web App.  There is apparently a problem in the way they are interfacing.  

 

(I know this because, when I do the same thing from my Windows 7 laptop, everything works perfectly, so this points to the iPad.   Yet when I open any other online document (from Dropbox, GoogleDrive, etc.) on my iPad, everything works perfectly again, so this points to SkyDrive and the WebApp..)

 

WHAT I HAVE ALREADY TRIED:

I have already tried a hard reboot of the iPad. In fact I have completely restored it to factory settings.  Although the iPad is first-generation, it is completely up-to-date, and running the latest OS (5.1.1).  As mentioned above, I have tried different browsers, different documents, and different accounts.

 

THE SOLUTION????

 

If you have a proposed solution, I would really appreciate it.

 

Caveat: Please respond to this issue only if you have a suggestion that might actually solve the problem.  Furthermore, experience with iPads, SkyDrive and the Word Web App, would seem to be necessary in order to make a constructive suggestion.  (On another forum, responders suggested multi-day experiments that provided no new data and had no real chance of solving the problem.  It was all very interesting, but I can only afford to spend more time on ideas that might work.)

 

THANK-YOU!!

 

 

Language problem - brazil portuguese thesaurus and spellcheck not working

Posted: 23 Aug 2013 06:54 PM PDT

We are using word 2010,

 

Today have purchased Portuguese language pack and downloaded and installed.

 

- language preference shows Portuguese brazil enabled and proofing tools installed tick ok

 

- under set proofing tools only shows Portuguese brazil with no tick

 

when trying to check spelling and thesaurus does not work in Portuguese brazil

 

bought this specifically to check text documents..

 

can you suggest answer thank you

 

 

 

 

My computer wont let me open any documents even though I have Office 2010 installed. Please help

Posted: 23 Aug 2013 04:19 PM PDT

I have an office 8 computer and i am trying to open an email from my coach. When I right-click it and select open an error message comes up saying "Something Went Wrong  We couldn't start your program. Please try starting it again.   If it won't start, try repairing Office from 'Programs and Features' in the Control Panel." It also displays the Office 2013 Symbol. I don't know where I can find the "Control Panel" or if that is even the right thing to do. Someone please help me soon!  (this is the message)

Word 2007 unbolds the letters before it when I use a formatted autocorrect that is bold

Posted: 23 Aug 2013 04:02 PM PDT

When I type a letter in outline format i.e. A) which is bold and then use a formatted autocorrect, it unbolds the A). How do I fix this?  

A)   "insert formated autocorrect" 

As soon as I put in the autocorrect, the A) gets unbolded and I have to go back and rebold it. 

How do I cancel flashing oblique in my text please?

Posted: 23 Aug 2013 02:01 PM PDT

I was helped, thank you, by checking spell-check, but now I have a flashing oblique /   that I can't  get rid of.  

 

[Moved from feedback]

No pressure or anything! (HA!) (Long) Microsoft Project

No pressure or anything! (HA!) (Long) Microsoft Project

No pressure or anything! (HA!) (Long)

Posted: 27 Oct 2004 10:59 AM PDT

I can't type as fast or as much as Steve House has already done, but on top
of the truth he has told you, here are some helpful hints. They are
interspersed in your post below:

--
-Jack ... For project information and macro examples visit
http://masamiki.com/project

..
"lamby74" <microsoft.com> wrote in message
news:com... 
Project 
matter 

Go to tools menu. tracking. save baseline. Then switch to the tracking view
or any other view which displays the baseline.
There is not much you can do to screw up the baseline except deleting tasks
or overwriting it by accident.
 

No one can unless it is a simple case, Project is supposed to do this for
you. One doesn't expect to know the bottom line in a complicated spreadsheet
before excel calculates it. Project is at it's heart just a schedule
calculator. You write the equation, it does the work. You can practice
writing equations by developing simple schedules (with two or three tasks)
and trying out the various settings. This is a very good way to learn.
 

It is all explained in the help. You just need to read it and read it again
and then one more time to be sure. Did I mention practicing on small
schedules.
 

See above and above that.
 
mortgage 

No. When you have the schedule the way you want, save a baseline and a copy
of the file. Any edits from this point on will affect your schedule and
there is no undo.
 
it 
predict 
its 

This is true. It all depends on the equation and conditions you have set.
Try some practice schedules with tasks set to various types (effort driven
or not, Fixed work, fixed duration, fixed units). Project is supposed to
give you an answer. If you have a correct model it (generally - there are
cases where there may be a bug) gives you a correct answer. This is the
whole purpose of the tool.
 
Resource 
to 
the 
w=d*u 
correct?

Yes, but at a certain point it becomes rather complicated and overwhelms my
brain. To retain sanity, I simplify my schedules to a certain extent and
only model what it important. I also do not worry about the occasional
minute or even day that it may be off. In any event, plans and predictions
of the future can not be 100% accurate. Expecting that they are is, to put
it mildly, insane.
 

No.
 

I think you can give him bottom-line answers with a little practice. They
may not be the answer he wants, but project just does what it is told.

-Jack

Inserting a fixed date task into an adjusting time line

Posted: 27 Oct 2004 08:25 AM PDT

Hi Maichael,

Power Point doesn't do Resource Leveling, Project does :-))

Yes there is an algorithm - Only a few days ago I gave an overview but I
forgot the title of the thread :-(
By all means, Assignments/tasks with the lowest priority are postponed
And you can tune priority, it is a task fieled, insofar you have selected
"Priority, Standard" in the Leveling
Order box of the Resource Leveling window.
HTH

--
Jan De Messemaeker
Microsoft Project Most Valuable Professional
http://users.online.be/prom-ade/index.htm
32-495-300 620
"Michael McGillick" <microsoft.com> schreef in
bericht news:com... 
how 
tasks, 
a 
concept). 
to 
the 
20 
have a 
not 
levelled. 
this 
in 
I've 
not 
I 
pulls 
How 
make 
working 
tasks 
needed 
by 
three 
task, 
adjusting 

How can I view a Project file without the software?

Posted: 27 Oct 2004 07:27 AM PDT

Hi THinson,

Welcome to this Microsoft Project newsgroup :-)

No - sorry :( You might be able to purchase an older version of Project on
ebay.

FAQs, companion products and other useful Project information can be seen at
this web address: <http://www.mvps.org/project/>

Hope this helps - please let us know how you get on :-))

Mike Glen
MS Project MVP

THinson wrote: 

Too many resources

Posted: 27 Oct 2004 07:21 AM PDT

I don't have any ideas to offer. It seems you have painted yourself into a
bit of a corner by trying to simplify things. Consider, even for the
projects where you haven't run into a problem, if each project is
represented by a single task entry in your plan and there is more than one
going on at once, having the same resource on more than one plan doesn't
necessarily mean he's overallocated. For discussion lets say there are 3
projects going on at once, each lasting 2 months. Joe is assigned to all
three. By representing them your way, he is going to show overleeveraged,
triple booked for his time. In fact it could be fine because project A only
needs him the first 2 weeks, project B uses him during week 3, 4, and 5, and
project C uses him the rest of the time. Incorporating the detail task
breakdowns would let you see that but simply showing each project as a
single task won't. Certainly an enterprise level master plan makes a lot of
sense but it requires some cooperation on the part of the fucntional PMs as
well as things you can do on your own (such as getting everyone up to speed
on MS Project and moving the holdouts over from Excel). My best advice is to
bite the bullet and do it by the book - sorry.
--
Steve House [MVP]
MS Project Trainer/Consultant
Visit http://www.mvps.org/project/faqs.htm for the FAQs


"tonik" <microsoft.com> wrote in message
news:com... 

Background color

Posted: 27 Oct 2004 06:23 AM PDT

Hi Anna,

Welcome to this Microsoft Project newsgroup :-)

Not possible, sorry :(

FAQs, companion products and other useful Project information can be seen at
this web address: <http://www.mvps.org/project/>

Hope this helps - please let us know how you get on :-))

Mike Glen
MS Project MVP

Anna wrote: 

MS should provide a FREE MS project viewer............

Posted: 27 Oct 2004 06:01 AM PDT

Hi jt,

Welcome to this Microsoft Project newsgroup :-)

Please see FAQ Item: 16. Project Viewer.

FAQs, companion products and other useful Project information can be seen at
this web address: http://www.mvps.org/project/

Hope this helps - please let us know how you get on :-)

Mike Glen
Project MVP

jt wrote: 

How do I get the base calendar to reflect 09:00 to 17:30 working .

Posted: 27 Oct 2004 04:29 AM PDT

You can edit the standard calendar just like any other. But the hours you
will get when editing any base calendar when you click the radio button "Use
Default" in the upper right part of the change working time dialog box will
always be 08:00-12:00 and 13:00-17:00 and that cannot be changed. Those
hours are hard coded and there is not way to modify them, not even a
registry hack. You can define any hours you want to be the normal workday
but anything other than 0800-1200 and 1300-1700 is "non-default working
time" by definition.

You can simplify it so you don't have to redo it every new project if that's
your objective. Open the standard calendar in Change Working Time, select
all the column headings for the week, click the "Nondefault working time"
button and enter 09:00-12:00 and 13:00-17:30 (or whatever your lunch period
is). Probably a good idea to also click Options and change the default start
time and default end time entries to 09:00 and 17:30 as well - this doesn't
change the calendar but usually should agree with it. Also set the "hours
per day" to 7.5 and if you work a 5 day week, the "hours per week" to 37.5.
Click "Set As Default" then click OK to close the dialog boxes and save
changes. Now in the menu choose Tools, Organizer and select the Calendars
tab. The calendars in the global will be listed on the left. The calendars
in your current project, including the standard you just modified, will be
listed on the right. Select the edited Standard calendar in the right
column and click the "<<copy" button in the middle to copy it over into
global and overwrite the old version there. Now the normal calendar for all
projects will refelct the 0900-1730 work hours. Clicking "use default" for
a day will revert it back to 0800-1700, nothing to be done about that, but
at least you don't have to edit the calendar each time you start a new
project to set it up for your company's work schedule.
--
Steve House [MVP]
MS Project Trainer/Consultant
Visit http://www.mvps.org/project/faqs.htm for the FAQs



"Ever Optimistic" <Ever microsoft.com> wrote in
message news:com... 

Completed tasks

Posted: 27 Oct 2004 02:45 AM PDT

Duh! - I wasn't thinking filters:(

Mike Glen
Project MVP

Gordon Blair wrote: 

Printing in Project

Posted: 26 Oct 2004 01:53 PM PDT

Hi Eddie,
You are very welcome. Glad to have helped and thanks for the feedback.
Julie

"Ecain25" wrote:
 

Progress Bar does not match percent complete

Posted: 26 Oct 2004 01:11 PM PDT

Hi Glen,
Check the calculation tab in the Tools --> Options dialog box. There are
several settings there that affect how tracking updates tasks. It may be
possible that the old file has different settings than the new file.
Hope this helps. Let us know how you get along.
Julie

"Glenn" wrote:
 

import

Posted: 26 Oct 2004 01:15 AM PDT

There's a bunch of things here I find confusing. First of all you said "in
my calendar and the default calendar" but that's not the hours per day I'm
talking about. In the menu find Tools / Options / Calendar. On that setup
page you'll find "Hours per day" "Hours per week" and "Days per month"
entries. Those fields control how a duration is, say, 3 days, is turned
into hours for storage. Changing the entries on that page DOES NOT change
your working time calendar but they are the conversion factors used to
convert the various valid units of duration to and from hours. You can
think of it as the Options determine how MANY hours you're talking about
when you say "1 day" while the working time calendar determines WHICH hours
out of the 24 count as working hours. If you have it set to 8 hours per day
and enter a task with a duration of "1 day" you'll find the task runs from
8am to 5pm using the default calendar. If you then change the "hours per
day" entry to 7 hours, changing nothing else, and look that task, you'll
find the duration will now read 1.14 days even though the times are still
8am to 5pm for 8 hours of work. That's because you've change the definition
of the number of hours called a "day" but that does not change the number of
hours the task will require.

Work and duration are not the same thing. Work measures the effort required
while duration measures the time it takes. Your 7 hours of work would
require a duration of 1 hour if all 7 resources are assigned 100% and work
together, 7 hours duration if they work at 100% but in sequence for 1 hour
each, 5 days duration if they work in sequence but at only around 18%
effort, or any number of other combinations.

There are so many factors involved with both with the specifics of the file
you're importing the data from and the project you're appending the data
into that it's hard to say just exactly what's going on from the information
you've provided. If you want to email the files to me I'd be happy to take
a look and see what I can figure out.


--
Steve House [MVP]
MS Project Trainer/Consultant
Visit http://www.mvps.org/project/faqs.htm for the FAQs



"parastoo mousavi" <com> wrote in message
news:com... 

Multiple formatting preference sets ?

Posted: 25 Oct 2004 09:24 PM PDT

Hi Gershon

two methods - record a macro that displays / hides the columns - tag this
onto the macro that displays the views from the toolbar buttons (if you went
with this initial suggestion of mine).
OR
create custom tables for each of the views - same method as the views just
under view / tables / more tables .... you can then customise the views that
you created to read these tables rather than the default "entry" table (view
/ more views - edit).

let me know if you need further assistance with this.

Regards
JulieD

"Gershon Shamay" <com> wrote in message
news:eWhsu%phx.gbl... 

Open Office - [discuss] Please Remove Me

Open Office - [discuss] Please Remove Me

[discuss] Please Remove Me

Posted: 25 Mar 2009 11:37 PM PDT

[sent this mail using a wrong address, so it might come again after
moderation - please excuse the additional work for you moderators]

Hi Joe,

I don't know if you finally managed to become unsubscribed, so I add
your email address to CC
[only to the original mail]

Joseph & Jane Washington wrote: 

You sent a mail to org and replied to the
confirmation mail you received afterward.
 

Your mail(s) didn't reach this mailing list - either because you sent
them to another list (org?) or they are stuck in the
moderation queue because you sent them before you replied to the
confirmation mail you received after subscription.

If they have to be moderated it might take some time until they are
forwarded to the list - or, if the moderator misconsiders them as spam,
they are not forwarded at all.
 

As nobody here read your replies the people here aren't hit... 

I hope you got the reply by Sigrid.
Otherwise please have a look at the mailing list's archive:
http://www.openoffice.org/servlets/ReadMsg?list=discuss&msgNo=64393

And with regard to the subject of this mail:

As you sent this mail to org too, you
should have received an automatic confirmation mail.

You just need to reply to this mail and you'll get a goodbye-mail from
the list-server ("Hi! This is the ezmlm program").

Hope this helped..

Best regards

Bernhard

---------------------------------------------------------------------
To unsubscribe, e-mail: org
For additional commands, e-mail: org

[discuss] how fdo i enable macros

Posted: 25 Mar 2009 07:16 PM PDT

--0-829908794-1238556560=:62517
Content-Type: text/plain; charset=iso-8859-1
Content-Transfer-Encoding: quoted-printable

Sigrid =0A=0Athanks=A0 for responding =0A=0Ai am not sure how to do that- i=
t sounds=A0 pretty complicated=0A=0AThanks =0A=0AGeoff=0A=0A=0A=0A=0A______=
__________________________=0AFrom: Sigrid Kronenberger <fh-kl=
..de>=0ATo: org=0ASent: Thursday, March 26, 2009 2:18:37 =
AM=0ASubject: Re: [discuss] how fdo i enable macros=0A=0AHi, =0A=0AAm Wed, =
25 Mar 2009 19:16:19 -0700 (PDT)=0Aschrieb geoff beglen <co=
m>:=0A=0A> i=A0 used=A0 oo calc to open an excel=A0 spreadsheet - how do i =
enable=0A> macros=A0 within the sheet =0A=0AExcel macros won't work within =
Calc, because both programs use a=0Adifferent programming language for the =
macro description. =0A=0AYou have to redo your macros in Calc. =0A=0ASigrid=
=A0 =0A=0A-----------------------------------------------------------------=
----=0ATo unsubscribe, e-mail: org=0AFor add=
itional commands, e-mail: org=0A=0A=0A
--0-829908794-1238556560=:62517--

[discuss] Copy a table nested into a cell of another table in Writer

Posted: 21 Mar 2009 06:19 AM PDT

An update, I submitted this as an issue here:
http://www.openoffice.org/issues/show_bug.cgi?id=100495

In the meantime, I tried to manually modify the XML: manually
open the XML document, move the XML structure represent the
first table into the particular cell of the other table, save
and rezips the files. Well actually that worked well. If you
want to do it, just make sure you have a XML-aware editor (I
used emacs with nXML-mode), not to put the table inside a
paragraph structure, and that there is a paragraph after the
table inside that cell.

Now all good with my tables in OOo. My issue is just in
importing to MS Word: OOo 2.4.1 MS Word exporting does not
support nested table, OOo 3.0.1 have other bug in table
exporting. :-(

--
(stephan paul) Arif Sahari Wibowo
_____ _____ _____ _____
/____ /____/ /____/ /____
_____/ / / / _____/ http://www.arifsaha.com/

---------------------------------------------------------------------
To unsubscribe, e-mail: org
For additional commands, e-mail: org

[discuss] speech-unsubscribe

Posted: 19 Mar 2009 08:02 AM PDT

Robert Holtzman wrote: 

ouch! <g>


--



Pierre
Worrigee, NSW,
,-._|\
/ Oz \
\_,--._/
v

"The boys dressed themselves, hid their accoutrements, and went off
grieving that there were no outlaws any more, and wondering what modern
civilization could claim to have done to compensate for their loss. They
said they would rather be outlaws a year in Sherwood Forest than
President of the United States forever." Mark Twain's Adventures of Tom
Sawyer

---------------------------------------------------------------------
To unsubscribe, e-mail: org
For additional commands, e-mail: org

[discuss] symbols option

Posted: 17 Mar 2009 12:57 AM PDT

On Mon, Mar 16, 2009 at 14:12, Ighins2 wrote:
 

Option # 1: Install and use the Hebrew Virtual Keyboard;

Option # 2: Install and use the Cyrillic/Latin transliteration macro;

Option # 3: Configure your keyboard so that you can switch writing
systems, and keyboard layouts;

Which option is the most appropriate for you, depends upon how often
you use each writing system.

jonathon

---------------------------------------------------------------------
To unsubscribe, e-mail: org
For additional commands, e-mail: org

[discuss] Installation Question

Posted: 17 Mar 2009 12:57 AM PDT

--_d50c7b18-eb8c-4255-b2ff-4af6acd950b0_
Content-Type: text/plain; charset="iso-8859-1"
Content-Transfer-Encoding: quoted-printable


Do I need to unsubscribe? Because that is not acceptable and inappropriate=
=2C no matter what prompted it. Consider whether your words are in the bes=
t interest of open source software. =20

com
R.D.Toon
Kentucky


 
e 

__________________________________________________ _______________
Express your personality in color! Preview and select themes for Hotmail=AE=
..=20
http://www.windowslive-hotmail.com/LearnMore/personalize.aspx?ocid=3DTXT_MS=
GTX_WL_HM_express_032009#colortheme=

--_d50c7b18-eb8c-4255-b2ff-4af6acd950b0_--

[discuss] Slow startup, I think I found reason

Posted: 10 Mar 2009 07:10 AM PDT

Thomas Lange - Sun Germany - ham02 - Hamburg wrote: 

I am not sure whether is it not a hardware issue. On my new HP EliteBook
8730w (OS is Ubuntu Intrepid) with active internet connection and
automatic updates on the startup is 5-6 s, what is not "so" bad. On my
old comp the same is a bit longer... but maybe I am wrong :).

Tomas

 


---------------------------------------------------------------------
To unsubscribe, e-mail: org
For additional commands, e-mail: org

[discuss] background page color

Posted: 04 Mar 2009 03:58 AM PST

a new sjabloon?

Guy Voets schreef: 

---------------------------------------------------------------------
To unsubscribe, e-mail: org
For additional commands, e-mail: org

EXCEL ADD-INS Microsoft Office for Mac

EXCEL ADD-INS Microsoft Office for Mac

EXCEL ADD-INS

Posted: 09 Apr 2008 07:20 AM PDT

> On 4/9/08 9:20 AM, in article caR9absDaxw, 

Cannot download the Upgrade because dial up internet

Posted: 08 Apr 2008 01:43 PM PDT




On 9/04/08 8:43 AM, in article caR9absDaxw,
"com" <com> wrote:
 

1> Use Curl from terminal:

Curl -C - -O
http://download.microsoft.com/download/4/6/f/46f710e2-4601-467a-9f95-fb3cb5b
2d713/Office2008-1201UpdateEN.dmg

2> When you purchase something, they don't specially make a version just for
little old you; handle the fact that you might just need to download an
update.

Damn American's and their continuous whining.

Matthew

Mouse issues

Posted: 08 Apr 2008 11:59 AM PDT

> On 4/8/08 1:59 PM, in article caR9absDaxw, 
---------
I finally tried a trick that was post in November 2007 on your forum, funny that you never heard about it...
Simply set up your mouse "double click" somewhere between half speed and 3/4 speed. Everything is back to normal. Anyway, it worked for me. :grin:

Mac excel

Posted: 07 Apr 2008 08:33 PM PDT

Hi Paulina -

Re #! - if you're looking for an equivalent to Win Excel's F4 use Command+T,
otherwise just type the $.

Re #2 - It varies depending on the keyboard, but full size Mac keyboards
have 2 delete keys: the one labeled "delete" removes content & puts you into
Edit Mode, the one labeled "del" clears content only (and doesn't remove
formatting or Comments). On a laptop "delete" & fn+delete provide the same
respective operations. You can also use Control+B to Clear All, as well as
going through Tools> Customize Keyboard to assign your own keystrokes.

HTH |:>)
Bob Jones
[MVP] Office:Mac


On 4/7/08 11:33 PM, in article caR9absDaxw,
"com" <com> wrote:
 

Urgent! Help Needed To Install Office 2008 on MacBook Air

Posted: 07 Apr 2008 09:56 AM PDT

Thanks Daiya, it worked like a charm! The boss is happy and I'm very happy.

Unicode "private use" glyphs in Powerpoint and Word 2008

Posted: 06 Apr 2008 04:21 PM PDT

On Mon, 7 Apr 2008 16:29:15 -0400, "CyberTaz" <gtz1@comcastdotnet>
wrote:
 

Ace - cheers!
 

Excel 2008 *nearly* gets it completely right. But there's certainly
some sort of MS-only trouble going on - cut'n'paste between Office
2003 apps failed in different ways depending on which app was source
and which was destination.

It'd be interesting to try this on a Tiger machine, but I don't have
any of those any more.
 

Will do, thanks.

Cheers - Jaimie
--
"All power corrupts, but absolute power is kind of neat"

Microsoft Word 2004 will not launch

Posted: 06 Apr 2008 11:24 AM PDT

Logging in while holding down shift did not work, but I was able to launch Word when in a new user account I created...so now I would like to be able to launch Word in my administrative account..

problems installing Office 2008 for mac!!

Posted: 05 Apr 2008 10:28 PM PDT

Hi,

More importantly, why aren't you running 10.4.11?

Matthew


On 7/04/08 4:54 PM, in article caR9absDaxw, "Oz"
<com> wrote:
 

Office 2004 update failure

Posted: 05 Apr 2008 06:26 PM PDT

On 4/5/08 9:31 15PM, in article caR9absDaxw,
"com" <com> wrote:
 

Well 11.0 will not open your Entourage database. Since there was a database
format change shortly after Entourage was released, Entourage 11.0 cannot
open a database saved in later version. You will get this error:

"This Identity Cannot Be Opened With This Version of Entourage"
This message means, for example, that Entourage is at 11.0, but the saved
database was saved in a more updated version like 11.4.

The problem does not affect everyone, so no new installer will be
forthcoming.

It seems as if every update they throw in some security update. What if
anything they do, I have no clue.

Office 2008 Dock Icon Needed

Posted: 05 Apr 2008 06:11 AM PDT

Dalya,

Thanks for the tip to use the icon from the 2004 Project Gallery. I now
have it on the dock for the 2008 Microsoft Office folder. Looks better
than what i was using. Let me know if you find something better for
Office 2008.

aRKay



In article <phx.gbl>,
Daiya Mitchell <org.INVALID> wrote:
 

Word 2008 crashing.

Posted: 04 Apr 2008 02:26 PM PDT

Did you look for older prefs/Normal as well?

However, in that case, you need to give more detail to get other than
the standard suggestions. When it is crashing? On launch, on quit,
when you do certain activities? What OS and type of machine? Create a
new user identity in OS X. Does it crash there? Did you add any updates
or install any other problems "yesterday" that might have helped trigger
this? Have you updated to Office 12.0.1?

Note that this is a user support group and in general, most people here
don't know how to read crash logs.

com wrote: 

APA Style/References list

Posted: 04 Apr 2008 01:05 PM PDT

You can adjust the Bibliography to APA format by editing the Bibliography Style. Go to the Format Menu and click on Style. Click on Bibliography in the Style Box and then click on Modify. To set a hanging indent click on Paragraph in the drop down menu in the bottom left hand corner, then under indentation you can set a hanging indention by dropping down the Special Menu (I set it at .05 and it worked well). Also, in my program, they prefer that we single space the citation and double space in between, which I was able to do also! I hope this helps feel free to email if you would like some more help.

Chalu (com)
 

Citation Manager format adjustment?

Posted: 04 Apr 2008 10:43 AM PDT

answered in Word.

njsmith wrote: 

Database Will Not Migrate or Repair - Office 2004 to 2008

Posted: 04 Apr 2008 08:50 AM PDT

In article <caR9absDaxw>,
com wrote:
 

I had the same problem and finally had to create a new identity in 2008
and manually bring in my inbox, sent mail etc. It was a pain but now
works perfect and I can rebuild my database.

spirractic pointer behavior

Posted: 04 Apr 2008 05:07 AM PDT

Gee thanks for you knowledge. I should have know that.

"Daiya Mitchell" wrote:
 

Office 08 auto correct problem

Posted: 03 Apr 2008 08:27 PM PDT

I'll try that...and see if it works...I've read most of what there is to read so far...I just think it's broken...

Thanks again...

~ kd ~

Office 2008 finds update is needed, but won't update...

Posted: 03 Apr 2008 03:10 PM PDT

> OK, so I called tech support and they had me uninstall Office entirely, delete old registries, and re-install office. That solved my problem. 

I too have been unable to install the March update to Office 2008. I think that Tech Support's solution you cite is too much work, and that Microsoft should fix the problem through making the update possible.

several simple questions

Posted: 03 Apr 2008 08:31 AM PDT

Although E'rage doesn't have an AutoText feature it does have AutoCorrect,
so depending on what you intend to use it for it may serve as a viable
alternative. there is probably a limit (perhaps 255 characters) but it can
be much more than the typical typo correction suggests.
--
HTH |:>)
Bob Jones
[MVP] Office:Mac

"neiljsalkind" <com> wrote in message
news:googlegroups.com... 

Upgrading From Office X v.10.1.9 to Office 2008

Posted: 03 Apr 2008 07:45 AM PDT

Office X is on the boot volume and there are no MS daemons in startup items. Thanks for the reply. 

Unable to access Office Apps

Posted: 02 Apr 2008 06:05 PM PDT

Glad you sorted it, I'm sure your detailed confirmation will help
someone in the future.

com wrote: 

Word crash when activating drawing toolbar

Posted: 02 Apr 2008 05:28 PM PDT

> I'm using Word 2004. I tried removing those files, and deleting the normal template, but still get the spinning beach ball. Is there a next step?

My only additional step was re-launching Word. All toolbars are working perfectly now.

PDF metadata

Posted: 01 Apr 2008 08:42 PM PDT

Sadly, the metadata in the generated file is both wrong and incomplete. The title isn't the title I assigned (it's been munged to have additional annotation about microsoft word), and the subject and keywords where were set in the word document properties remain blank in the generated pdf. Testing with word2004 (my other computer isn't handy) produces the same deranged result, with the additional (at least from memory) bit of damage that Author is set to "System Administrator" rather than the Author I'd set in the Document properties.

Nice tip about the extra report though.

Office document icons are showing differently than they should

Posted: 01 Apr 2008 06:42 PM PDT

All indications are that this is caused by either the OS X feature called
Cover Flow or Quick Look - not sure which, perhaps both. It's being looked
at by MacBU but nothing definitive as yet.
--
Regards |:>)
Bob Jones
[MVP] Office:Mac

<com> wrote in message
news:caR9absDaxw... 

Upgrade from 2004 to 2008

Posted: 01 Apr 2008 03:26 PM PDT

On 4/1/08 3:26 00PM, in article caR9absDaxw,
"com" <com> wrote:
 

If you have questions regarding the Microsoft Office 2008 Promotions or
would like to check the status of your order you may call:

***1-888-285-6247***

Customer service hours are Monday thru Friday 8:00 am to 10:00 pm EST.

For email support, please email microsoft.upgrade.com and
allow 48 hours for a response.
--
Diane
Entourage Help Page <http://www.entourage.mvps.org/>
Entourage Help Blog <http://blog.entourage.mvps.org/>

Setup Assistant Crashes on Main User Account, Runs Fine on OtherAccounts

Posted: 01 Apr 2008 12:23 PM PDT

On Apr 1, 7:29*pm, Diane Ross <entourage.mvps.org>
wrote: 

Wow thank you! That did the trick!

Microsoft CRM - Activity customization / publishing

Microsoft CRM - Activity customization / publishing

Activity customization / publishing

Posted: 26 May 2004 08:17 AM PDT

Thanks Matt,
I guess my next question is exactly what "hard-coded"
means (other than Microsoft wont let us alter them
easily). The activity forms refer to the specific sequel
table (Activitybase)and the objects found there.
Shouldn't there be a way to add a field to refer to a
different object or add atleast add a value to a picklist?

Also, the object id on the formeditor is the same, yet the
form seen in the editor and the crm are obviously
different. Do we know where the CRM draws its current
activity forms from? It seems as though there should be a
solution to be found, and from the looks of it microsoft
had atleast begun to develop some customizable parts for
the activities.

--Erik

 
follow the same design as 
forms that are specific to 
to publish the changes, 
to the activity table, 
to show up without an 
actually broke when I did 
<microsoft.com> 
fields 

Can I install on One Windows 2003 Server

Posted: 25 May 2004 11:56 AM PDT

dont really see any problems there... it should work just fine..



"mikieg_99" <etypemedia.co.uk> wrote in message
news:talkaboutsoftware.com... 

Anyone installed c360's Activity Summary customization?

Posted: 25 May 2004 10:18 AM PDT

We use it and we're very happy
We've been running it for 6+ mos

No problems

----- net wrote: ----

I was just requested to insall c360's Active Summary customization an
need to know if anyone has any input that I need to be aware of

Pitfalls, errors, problems, etc..

Thank you

Outlook client synchronization

Posted: 25 May 2004 09:54 AM PDT

I am new to MSCRM. My questions might be basic for you and if you
don't want to answer I would suggest please don't read my posts. I
guess this is the forum where you can get your answers to your doubts.
I started reading about MSCRM only this month. My customers have
certain requirements which I need to answer quickly and reasearching
on your own takes a lot of time. Let me tell you that I have been
reading the guides and I have passed the Application exam and
preparing for the second test. Don't just say guides...give me the
links/pointers to start learning about customizations.

I have the following posts, let me get your expert comments on them:

1. I have a post about creating a view for shared contacts. Let me see
what you have to say for that if that sounds very basic to you. What
will be the fetching criteria.

2. A workaround for creating checkboxes, not an ISV product. Don't
just say this feature is not supported, wait for next release. That is
not the kind of answer the customer wants to hear.

3. A workaround for creating multiple level drop down boxes.

Thanks.


<microsoft.com> wrote in message news:<126fb01c442e6$d588a530$gbl>... 

CRM error

Posted: 25 May 2004 08:56 AM PDT

I already tried that, but I still get the same error.

 
host" to the netbios 
message 
the 
message 
users 
have 
website 

Manual Rule doesn't work

Posted: 25 May 2004 06:16 AM PDT

I have a case create rule which includes only on step to exec sub process
which is a manual rule that have one step only to create an activity

Can you integrate MS CRM with SharePoint Portal Server

Posted: 25 May 2004 12:36 AM PDT

Thanks John

I'll look into this and see if I can get it to work.

Redeployment tool

Posted: 24 May 2004 06:01 AM PDT

Thanks John, the link you gave works fine.

Leads with multiple contacts

Posted: 21 May 2004 01:53 PM PDT

Lee; there are a number of ISVs who have build custom solutions that do what
you require:

www.salentica.com
www.c360.com

Dave


"Lee" <com> wrote in message
news:google.com... 

Changing password in Crystal Reports

Posted: 21 May 2004 01:51 AM PDT

You can rebuild the crystal database and therefore reset the crystal
password. Which version of crm are you using?


"Martin Gallagher" <com.nospam> wrote in message
news:com... 
the password if the password is lost.
Subscribe to: Posts (Atom)